What is my iphone 5 completely dead?

Similar Questions

• Satellite L50 - B - 14 M completely dead - no power not on

  Hi all

  I am now the proud owner of a Toshiba Satellite L50 B 14 M, since a few days it serves not on at all. When it is pressed the button at the top right (even for al longer) nothing happens, not even a little noise or a flash of light. He remains completely dead and will not turn on at all. Haven't tried with adapter connected / not connected / without battery still no change. The laptop was not abandoned or in a hurry or anything strange I just pressed the power button to continue working on it.

  Tips / advice is much appreciated! Best regards, Jan

  Hello

  It's really not easy to say what may be wrong with that. Unplug the AC adapter / CC, remove the battery and press the power button for about 20 seconds. After doing this leave for a while and connect the power supply only.

  DC in / battery indicator lit?
  What happens when you press the button walk / stop? Is there a reaction?

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• Satellite Pro A120 is now completely dead

  I have a Pro A120, which has not been used for a few months, but is now completely dead.
  There are no lights on it at all. I bought a new power adapter, but still nothing.
  Can anyone suggest anything to check/replace or did it. It worked fine the last time I used it.

  Hello

  Remove the battery and unplug the AC adapter.
  Wait 1 hour or more and then reconnect the two parts.
  Then try again to power the unit.

  If that does not help, check out the RAM modules.
  Remove a module and test the device with a RAM module.

  If that does not help, then you should get in touch with a local computer technician laptop because he feels as a serious problem of material

• Satellite M70 - LCD display is completely dead

  Hello

  I have SatelLite pro M70 PSM76E and I it has following problem
  When I try to turn on, LCD is completely dead. I have connected the CRT and it seems to start ok but when it goes to windows it freezes and restarts after a few seconds.
  I think this is not problem with OS because when I use the recovery CD and knoppix cd LCD screen is always black. Maybe that's the problem with the graphics card or motherboard.

  I do not have a manual to disassemble to clean my M70 inside.

  I would find myself solution before going to the service.

  All ideas,

  Concerning
  Wuwik

  If you get an image on the external monitor, but not on the internal, it sounds like a failure of inverter FL. It controls the backlight of the screen and must be replaced.

  I recommend you contact an ASP in your country. They can disassemble the laptop and exchange the part. I m sure they will help you.

• My iPhone 4 is dead. I loaded an hour then tried the power reset but not joy.

  My iPhone 4 is dead. I loaded an hour then tried the power reset but not joy.

  I'm going to assume that your iPhone 4 no is not in warranty, otherwise you'd be on the Apple Store, right?  I also assume that you are not interested to pay the service battery $ 79 or $ 199 iPhone 4 warranty exchange for a device that is worth less than $100 (U.S. prices)

  So so let's solve the problems.
  When was the last time it works well?

  An iPhone 4 is old enough, and if it has been inactive for a while, then it is possible to lose load under the level at which it is able to charge the battery.  The battery has a logic board little teeny buried in the packaging of the battery that dictates the charging process.  There is really no energy, the battery doesn't have enough juice to be able to tell itself to charge when the charger is connected.

  If the phone has relatively recently been works well, then start troubleshooting in the charging port.  Is your refill clean?  Try to clean with alcohol to 99% and a q tip.  If that doesn't resolve, then you need more information - there are some ammeters really convenient usb little inexpensive that you can plug into a charger, then the unit and he will tell you exactly how much, if any, current load appliance pulls.  An iPhone 4 with normal charging system should draw on 1 ampere.   If yours is pulling 1 amp and shows still do not display, try to connect to iTunes to see if your device is recognized.  If this is the case, then you need solve a display problem, not a problem of load.

  If your closer 0 amp, then you need to open your phone and troubleshoot the battery and dock connector.    A lot of DIY resources out there for you help with this, just a google search away.

  A trip to an independent repair facility will also help you to go down on the problem.  Pick one that stands out for its work with the great review, great warranty and someone who is willing to look at this iPhone 4 with a no solution = no fee policy.

• My I Pad has gone completely dead. It is a model and just completely dead tw vertion. Anyone has an explanation please

  My I Pad has gone completely dead. It is a version2model and just completely dead. Anyone has an explanation please! I turned on and off and the top (or at least gone through the process) charged no sign of life at all. ???

  How long have you leave the charge for the iPad? It will take at least 30 minutes on the charger before an iPad with a completely dead battery react. Be sure to use the charger supplied with the iPad, or its equivalent. Do not recharge an iPad by connecting it to a USB port on the computer. After 30 minutes on the charger to reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

  If the unit still doesn't start not to make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• My Equium is completely dead because of the update of the BIOS

  I just tried to update my bios, computer shuts down automatically after 5 minutes and now it is completely dead

  Sorry, but you must contact the Service in your country. They can help you.

  I'm afraid there is nothing you can do. :(

• HP TouchPad is completely dead

  After using the touch pad a following, the next day it became completely dead.

  I thought that the battery could be drained.

  If connected to the charger.

  But after that nothing has been seen on the screen.

  I tried all five ways to make the HP in operating condition, mentioned on the support of the touch pad.

  It is said in the fifth stage to install WebOS doctor.

  I did it too and when I coonect the camera to the laptop, the device is detected by the laptop, but WebOS doctor do not highlight the next button.

  I kept it for 4-5 hours of charge with USB port.

  But it still does not.

  Well want to, help me as soon as possible.

  Kind regards

  Serin

  Patricia wrote:

  Thank you

  After loading of Ubuntu on PC.

  I need to connect the touchpad on the laptop, and it will give instructions to activate my touchpad.

  Hope I'm right?

  Even if it might be too obvious, but I'm new with it. Please excuse me if I asked too obvious.

  Thank you once again

  Once more, you will need to follow the directions exactly as written in the thread that we have linked to you.  Just plug the touchpad to the pc will not fix anything - you need to download both programs, unzip and extract one of them, change the directory, and then run the program.

  Good luck!

  WyreNut

• Smartphones blackBerry 8310 completely dead on upgrade

  Please I need immediate emergency assistance. While the upgrade of my 8310 I got failed error message say to reconnect to JVM and now my BB is completely dead with a starnge sign on it 'Box Rectangle with a circle with a transverse line and 507 written below'. Thanks for the immediate support

  This error means that there is no software installed on your handheld device. Simply download and install the new software on your PC then BlackBerry device via a USB cable. This will solve the problem.

• I got a new Sport iWatch for my birthday at the end of November. I followed the start of instructions for synchronization with my iPhone. Nothing happened. The iWatch battery was completely dead. Is this normal with a new show?

  The battery on my new iWatch was dead when I opened the box. Is this normal? The watch seems to work now after that I gave her a load.

  Hello

  The battery on Apple Watch charge will reduce over time, even when it is off.

  It is possible that your watch has been stored for a while before you received it as a gift. Your communities of Apple Support profile indicates that your watch has watch OS installed 1.0.1. This version of the software was released in may 2015 and was followed in September 2015 watch OS 2.0.

  For all the latest features and best performance, update your iPhone and Apple Watch for the latest versions of software (currently 9.2 and watch OS 2.1 iOS). The software update instructions are available here:

  - Update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  - Update the software on your Apple Watch - Apple Support

  More information on the workload of your watch:

  Check your battery and load your Apple Watch - Apple Support

• Memory of my iPhone automatically complete as 1 MB per minute... What can I do?

  Pls help me

  It might help you to describe what you feel more in detail.

• iPhone 6 completely insensitive

  battery 1% for about an hour, the screen went black, completely insensitive phone. plugged during the night, same case. so I ordered a new battery and charge entry port / to the / Assembly of mic, since my warranty has expired.  I replaced the properly and all assembled exactly the way they are supposed to (I know that the Ribbon cables aren't supposed to bend past 90 degrees).  tried to turn it on just using the power button, and nothing happened.  tried the hard reset again and again nothing happened. no vibrations or anything like that.  tired to load all night again and do the same thing, and nothing works at all.  I need my iPhone soon.  any ideas why stop just randomly my phone?  any help will be greatly appreciated.

  Sorry, once opened by unauthorized repair (or yourself) you cancel any warranty and services, including this site.

  You must use a 3rd party repair service (hope you get a good and knows what they are doing).

  Good luck.

• iPhone 6 Pixels dead (at the top left of the screen)

  I got my iPhone 6 a few weeks ago, and after 1 week, I noticed that there is a group of dead pixels in the upper-left corner of the screen. I contacted apple had replaced the phone and 1 week after getting my replacement, I noticed, once again, a pile of dead pixels on the EXACT SAME SPOT on the SCREEN (upper-left). What could be the cause of this problem?

  If the second device having this problem, visit an Apple Retail Store or the service provider authorized Apple next to your place to check the phone.

  Replacements are also covered by the warranty.

  Find an Apple authorized service provider

• iPhone 6 complete storage, but should not be

  I had a problem with my iphone 6 storage saying that it is complete and in the last year.  I did a system restore a couple of times to get the part of the rear compartment, however, it appears more frequently and the restoration is almost necessary every month!

  I thought with the update ios 10, he'd be better, but I got another message this morning saying that my storage is full. This phone has a capacity of 12 GB and shows that I've used GB 11,51 with 389.2 MB of free space.  I have 2.4 music and about 3 GB in all my other apps, including images.  Who only adds up to 5.4 GB, less than half the capacity of the phone.  ITunes does not show an another 6 GB of 'other', but only about 1 GB.  How can I erase this upward?  The restoration was not effective for me.

  Thank you

  The following steps should help with erratic behavior. They assume that all the content you want on the device in your lending library for the restoration. If not see recover your iTunes from your iPod or an iOS device first. I would also recommend you copy everything off of the camera, if you have not already.

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  Use a backup encrypted if you want to keep passwords, wi - fi settings, history and health web data as appropriate.

  TT2