Whats removed to a 04-HKLM\...\Run registry entry

Similar Questions

• Cannot remove trojan apparent - continues to add registry entries

  I am working on a Dell 2400 that was not (until recently) updated or properly protected with a firewall / virus protection.

  I tried the copy of the demo of Norton Antivirus and it had detected I think:
  Trojan.fakeavalert and another who was virtumundo trojan.vundo or Trojan (I forgot the name)

  Recently, I uninstalled NAV installed the following:

  ZoneAlarm Internet Security (and all updated)
  AdAware 2008 - free version (and it's also up-to-date)

  The two ZoneAlarm & AdAware run fairly clean except for the cookies, etc. (low priority stuff)

  My problem right now is that there is something that is adding entries to the registry (even in safe mode), and it causes many web pages to pop up in IE7 or FireFox.
  The entries that I find in the registry are:
  \HKLM\software\microsoft\windws\currentversion\run
  Rundll32.exe "c:\windows\system32\rulufutu.dll",a"
  Rundll32.exe "c:\windows\system32\piyudijo.dll",a"
  Rundll32.exe "c:\windows\system32\kitehuvu.dll",a"

  When I delete these entries (even in safe mode), they are added in a few seconds.

  Try scans with both of these programs in the following order:

  Please disable other security software that may cause conflicts with the scans. (Remember to enable it later.)

  Instructions on how to do that are HERE.

  Please download for your desktop Malwarebytes' Anti-Malware here or here

  Double-click on mbam - setup.exe to install the application.

  • Make sure that a check mark is placed next to the Update Malwarebytes' Anti-Malware and launch of Malwarebytes' Anti-Malware, and then click Finish.
  • If an update is found, it will download and install the latest version.
  • Once the program has loaded, select "perform quick scan", then click scan.
  • The analysis may take some time at the end, so please be patient.
  • When the scan is complete, click OK, and then view the results to view the results.
  • Make sure that everything is checked
    Click Remove selected.
  • End of disinfection, a log will open in Notepad and you may be prompted to restart. (See additional Note)
  • The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.

  Additional notes:
  If MBAM finds a file that is difficult to remove, you will be presented with 1 of 2 prompt, click OK to either and let MBAM proceed with the disinfection, if asked to restart the computer, you can do so immediately.
  * If you cannot download or install MBAM on your computer, see if you can use the computer to a friend or family member to download MBAM. Use this link to update here to manually download the update. Once downloaded, rename the Setup file "mbam - setup.exe" to something like "catchjunk.exe". Copy the installation file and the update on a CD or a flash drive file. Transfer the file on the infected computer. Install the "catchjunk.exe" file, and then run the update so that you get the current definitions. After that, run a full scan of the system and select to have the program REMOVE everything it finds.

  * If you need to re - install MBAM but problem by reinstalling, try using the MBAM Cleanup utility by downloading from http://www.malwarebytes.org/mbam-clean.exe

  Download and scan with Super Anti-Spyware free for individuals. It is available HERE:
  * Double-click on SUPERAntiSypware.exe and use the default settings for the installation.
  * An icon will be created on your desktop. Double-click this icon to start the program.
  * If it is asked to update the program definitions, click "Yes." If this isn't the case, update the definitions before scanning them by selecting 'Check for Updates. (If you have problems downloading updates, download and unzip them from heremanually.)
  * Under "Configuration and preferences, click Preferences .
  * Click the scanning control tab.
  * Under Scanner Options make sure the following is checked (leave all other non controlled):

  Close browsers before scanning.
  Search the rejected.
  Terminate memory threats before quarantining.

  * Click on the "Close" button to leave the control center screen.
  * Back on the main screen, under "Scan for harmful software" click Scan your computer.
  * On the left, make sure you check C:\Fixed drive.
  * On the right, under "Complete Scan", choose perform complete scan.
  * Click 'Next' to start the scan. Please be patient while it scans your computer.
  * Once the scan is finished, a Scan summary box will appear with potentially dangerous elements that have been detected. Click on 'OK '.
  * Make sure that everything is checked, and click "next".
  * A notification will appear this "quarantine and removal is complete. Click 'OK' and then click on the 'Finish' button to return to the main menu.
  * If it is requested if you want to restart, click 'yes '.

  If that does not solve the problem, maybe it would be good according to a journal of control on the malware removal Forum.

  Be sure to read the instructions at the top of the forum.

• What steps should I take to find out what & where a program is constantly running on my computer. I have a Vista laptop comaq

  Seems that my computer is running more slowly than normal. Went to Microsoft Fix & this was the answer I got from them. They will fix it if I pay a fee. I just don't have the money now. Help!

  Thank you... Bette

  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically

  
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• SQL Server Express of 2014 will not remove registry entries when uninstalling

  Hello

  I am responsible for the routine installation of our products in our society. We used to install SQL Server 2008 Express with our facility. We also checked the registry entries to detect if the SQL Server 2008 Express to a specific instance has been installed. When we run the uninstall for our program, we have also uninstalled auf instance. If it was the only forum wihtin SQL Server SQL Server hole has been uninstalled. This works as expected.

  Now, we want to implement the 2014 of SQL Server Express. The installation is successful and everything is working properly. But when we uninstall SQL Server 2014 leaves a large number of entries in the registry. In particular, the entry for the version number:

  HKEY_LOCAL_MACHINE\SOFTWARE\\Wow6432Node\\Microsoft\\Microsoft SQL Server\\120\\SQLServer2014\\CurrentVersion\Version

  This makes it difficult to detect if SQL Server 2014 is installed on the system, because SQL Server 2008 uninstall these entries when deleted as expected. OK I can check some folders and files, if they are available, but this does not seem the right way.

  Is this a bug, or are there reasons why the registry entries are not removed after uninstalling?

  Kind regards

  Christian

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• What is the value of a registry entry "PromptRunasInstalNetPath" Windows for?

  What is the value of a registry entry "PromptRunasInstalNetPath" Windows for?

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies]

  "PromptRunasInstalNetPath" = DWORD: 00000001; Guest ' run as ' install Net way -?

  It is not yet in the "WindowsServer2008R2andWindows7GroupPolicySettings.xlsx" Microsoft Excel spreadsheet Data-Base; so that is it for exactly?

  Ditto for the following RegEntries 3:

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Network]

  "NoWorkgroupContents" = DWORD: 00000000. No content of working group -?

  "NoFileSharing" = DWORD: 00000001; No file - sharing?

  "NoPrintSharing" = DWORD: 00000001; No print sharing -?

  JPD

  Hi JPD.

  Thank you for visiting the Community Forums of Microsoft.

  We don't have enough resources to provide a good explanation for this query. It is better suited for the professionals on the TechNet Forums. So, please post your question on the Forums Pro TechNet Windows 8 IT from this link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Hope this information is useful.

• What is the syntax and command options registry RegKeyDel?

  What is the syntax and command options registry RegKeyDel?

  http://multicommander.com/docs/MultiScript/functions/registry

  That's all I found (in English).

  SC Tom

• What is pbfilter in the windows xp registry

  Could someone tell me what is pbfilter in the windows xp registry? I tried a search to find out what it is, this software is it related to and what he does. Any information is greatly appreciated by many. Thomas

  Answering this question in email, hard drive failure was the culprit that maintained windows to settle completely. got new hard drive.

• What do I need open and run a WIN RAR file sent to me?

  WIN RAR

  What do I need open and run a WIN RAR file sent to me?

  A third-party compression program that can decompress this file.  Windows does not have any integrated other than "ZIP" compression algorithm

  WinRAR is not a Microsoft application.  You are welcome to buy it and install it, of course.

  You may be able to use the free 7-Zip to decompress the compressed files, that you received.

• "All programs" is empty after running Registry Cleaner

  After running registry cleaning software, I lost the ability to see all my programs when I click on "All programs"... property is (empty)... same problem when I click on "Favorites"... resulting (blank)... suggestions?

  It would be good to know how the system restore has failed.

  Any registry cleaner worthy of the name should back up the registry or at least to save the made changes so that you could "undo" them.  Try to run to the top and look for an option "Cancel".

  Another possible option would be to create a new user on your system.  When a new user is created, the default desktop items are regenerated and this could be a way to get back them.

  Other than that, you may have to re-create your icons to find programs in the folder c:\Program Files\ and recreate the shortcuts on your desktop and start menu.

  The register is an essential part of Windows and should not be messed with except if you know enough to back up the registry before you do anything about him, and restore the registry when things go wrong.

  HTH,
  JW

• What microsoft software is locked/hidden registry entry "DbgagD" used with?

  My antivirus software informed me that I have a locked/hidden registry entry, which is not common. What microsoft software is this registry entry with that dbgagd used? I use vista 32 bit. My computer works without any problem, but I'll try to find the reason to make him not: -.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DbgagD\1

  "I ask this as I was told that its an important file or an entry of key infection may not even be reviewed or edited, when I click on '1' folder in the registry I get immediately ' an error prevents this key in the opening: the system cannot find the file specified." The registry would be corrupted? I need to know what this key is for as this is the only file which is detected in avira as requiring special attention, as its hidden without a valid reason. It is perhaps more technical that most general users are used to, but I thought I'd ask about it here, if any staff of Ms actually uses this site, and is not just for users. My antivirus software and firewalls have not detected anything other suspect outside this hidden file. I can't ignore it, and I do not want to reinstall, because it can easily happen again. Kaspersky tdsskiller with its default settings does not detect anything problematic. Detection of GMER rootkit (and microsofts own F8 at startup to repair vista) both give me a blue screen, with "lack of kxdlipoc.sys" > page in the box of nonpages "' on the errorlog for Gmer. The error with microsoft vista F8 repair is too fast to read however on the blue screen, even if I set automatic restart flaws in the vista start menu. The blue screen for F8 does not show in the newspaper.

  Thanks for any help

  Hello

  I suggest you to check the following Microsoft Technet link and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/dabec0f5-2d0c-4D4F-8b39-5d1be1b35f10

  Hope the information is useful.

• What is the best way to run the report of jasper in the ADF Applications?

  Mr President.

  What is the best way to run the report of jasper in the ADF Applications?

  Concerning

  Tender Hello,

  Check out these links

  Sameh Nassar: Using Jasper report in Application of ADF (detailed)

  https://www.YouTube.com/watch?v=ezX0gdLIhs0

• What is the recommended way to run a WebLogic Server in the background?

  I'm new to WebLogic Server and I was looking at the documentation. There are instructions for starting and stopping the servers under Linux, but they all seem to rely on the foreground process. What is the right way to run these processes in the background in a production environment? Is it just using nohup somewhere in an /etc/init.d/ script or y at - it another way I should run it?

  Meatwad,

  Of course, running the WLS process using nohup would put the process in the background. However, the recommended way to run the WLS servers on a production system would be to configure the node Manager and use it. Place the servers as a background process, it also provides additional features, that would be useful - for example, allowing the start and stop the console of administration with the ability to auto restart failed or stuck servers.

  For more information, please see the documentation.

  http://docs.Oracle.com/CD/E17904_01/Web.1111/e13740/starting_nodemgr.htm

• Are pre-existing registry entries overwritten by the installer?

  I was wondering what happens when creating a distribution installer that creates registry keys, but keys already exist on the target computer when the Setup program is run.  Change the keys to existing registry or the installer will skip them?

  Thank you.

  I think that they get too wrote.

  You do not get file or revision based on components with the CVI distribution Publisher: If the version of the installation is more recent than what was last used to install the application, it will overwrite everything in the distribution, even if later versions of the separate elements are present on the target.

  Distribution tools more efficient (for example InstllShield) can you give the desired probably behavior.

  I don't think the individual registry entries to wear a version on them: common practice is to use a different set of registry values for a more recent demand, not revised version of the keys and values.

  Menchar

• Connection Manager profile registry entry

  Hello

  On my WIN XP SP3, I found a Profile Manager HKCR\Connection registry entry. Its subkeys Shell\Open\Command points to a file CMMGR32. EXE in the System32 folder, but the file does not exist there.

  My questions are:

  What is the use of this article?

  What happens if I delete this entry?

  This key is tied to a Windows component that is not installed on my system?

  How can we determine the validity of these keys?

  Thank you best regards &,.

  Abhay-

  What is the use of this article?

  It seems that the connection manager has been a feature of people into their custom in Windows Server 2003 and Windows XP applications:

  http://TechNet.Microsoft.com/en-us/library/cc778989 (WS.10) .aspx

  More that likely the exe is installed with custom applications.

  Note: This key is not in Windows 7.

  What happens if I delete this entry?

  I tested in a Virtual Machine and that you are having problems. You wouldn't see Remove me these keys on my main box, as if this was not necessary it would not included by default in the operating system.

  This key is tied to a Windows component that is not installed on my system?

  Nope, it comes standard with every installation of Windows XP.

  How can we determine the validity of these keys?

  I don't know of any database that contains a list of all the keys in registry and their validity. Given the magnitude of such a basis, I doubt there are (but if we don't I'm sure someone in the community probably knows him).

  I briefly mentioned above, but I want to reiterate that I do not recommend 'house cleaning' in the registry. Do such causes far more problems than it solves. It is important to keep in mind that several registry keys are in place that for compatibility reasons (this key is a perfect example). Deleting these keys does not cause immediate problems now but could hurt you later on the road.

  If you want to experiment with the familiar registry keys deleting, I highly recommend the creation of a virtual machine with Virtual PC and allowing disks of cancellations.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Registry entry to force the installation of the updates of the player?

  Greetings!

  I tried to deploy updates to the reader through our network via GPO, but it has been a real, real problem. In addition, because some client computers are connected through slow links at the time of installation is sometimes excruciatingly long (configured computer GPO).

  SMS is not an option right now, so I think that rather than use GPOS to manage centrally the drive updates I lower my arms and leave the choice to the users. So my question is if there is some sort of a registry setting which will force the Player updates to install once they are downloaded from the Internet. Or, Alternatively, if it is a kind of login script available which would check if there's a player update available for installation and install it by force. Or, Alternatively, if anyone has found a better way to deal with the nightmare of the Reader GPO deployment.

  Hello

  Well, as you said, GPO would have been the best option to update through a corporate network. You can view the guide at http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Enterprise_Administration.pdf. It can give you some more tips on how to maybe change your settings in order to ensure a quick installation.

  As your second question, you can use the option "Install updates automatically" for the Player update, which automatically installs updates as and when it downloads everything. The registry entry to set the same is as below:

  Before Reader 10.1:

  [HKLM] \Software\Adobe\Adobe ARM\1.0\ARM\

  Name: iCheck (DWORD)

  Value: 3

  Post Reader 10.1:

  [HKLM] \Software\Adobe\Adobe ARM\1.0\ARM\

  Name: iCheckReader (DWORD)

  Value: 3

  You can set the same using a script for connection via GPO. This will ensure that all as updates and available will settle as soon as its downloaded, provided no process of the drive is running at this time here.

  For more details on all the configurations on update preferences, please see the following document:

  http://kb2.Adobe.com/CPS/837/cpsid_83709/attachments/Acrobat_Reader_Updater.PDF

  Hope this helps

  Ankit