Where EarPods replacement?

Similar Questions

• code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

  code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

  [Moved from the community centre of Participation]

  Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

  Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

• How/where to replace hard drive

  Whenever I turn on my computer, it displays a message indicating the hard disk failure is imminent and suggested me to replace it.  I have already backed up all my data and tried to restore the computer to factory settings, but the same message appears.

  I have to buy a new hard drive?  Alternatively, can I install a program to cure the problem?  Where can I buy a new hard drive which corresponds to my Presario SR5838HK PC computer?

  Thank you!

  You can replace your internal hard drive to the SATA II (3 Gb/s) with a new SATA II (3 Gb/s) or the newer SATA III (6 Gb/s) as long as you follow this advice:

  (1) must be the same size (your supposed to be delivered with a 320 or larger.) The maximum size limit is 2 T.

  (2) SATA II are hard to find. New SATA III AF drives need a minimum of WIN Vista, you have installed. You will get slightly better performance with the latest SATA III 64 MB cache of readers.

  (3) If you have at least one Seagate or WD drive in the configuration, can use their free cloning software. He called Assistant disk.  I hope that your original HD can run without the flaws in the process.

  The clone treat it direct. See here for help.

• Satellite A210-199 - how to replace the fan?

  A Satellite A210-199 of the fan does not work, where to replace in Donetsk (Ukraine)?

  Hi romantik4488,

  On the Toshiba site, you can find a list of all authorized service providers. Technicians can replace the fan and order a new one. You can search here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Replacing the fan isn't easy because many parts must be removed, then the best option is in touch with an authorized service provider.

• Satellite A60-106: where to find a compatible CD/DVD player

  Replaced HARD drive has attempted to load the operating system (windows original xp recovery and/or linux mint) both drives recognized and started the linux disc is a cd live and worked but when trying to install hard disk two systems reached about 25% and stopped in the case of the linux a message telling me that the hard drive is faulty It is necessary to clean the cd or the dvd/cd drive is dirty or defective.

  I cleaned them both, checked the integrity of the cd, replaced the hard drive. So don't let the dvd/cd drive.
  Where a replacement? or did someone knows what the problem could be PS

  I am a novice

  Hello

  > Where a replacement?
  A compatible CD/DVD player can be ordered from a local Toshiba ASP.
  Then get in touch with the ASP from Toshiba to get a new compatible CD/DVD player

  Good luck

• VUM 6.0, replacement of SSL certificates

  Hello

  VCSA device (6.0) external PSC

  VCenter VCSA device (6.0)

  VUM 6.0 (1 x R2 Windows 2012 running SQL 2014 and 1 x R2 Windows 2012 with VUM installed)

  Open root SSL and subordinate CA

  I replaced the certificates for the PSC with no problems, the VC and the hosts are all good :-)

  To replace the VUM SSL certificates, I followed KB 1023011 and replaced the self CERT signed with certificates signed by a subordinate CA OpenSSL. When I open the VI client and activate the VUM plugin I get a certificate error. If I open the PFX and import it into my personal cert store the complete chain, subordinate and root is here, and all are approved. If I navigate over https to another server where I replaced the SSL certificate with the one that was signed by the same CA browser isn't moaning.

  Issues related to the:

  1. the error indicates that my PC does not trust the cert or vCenter does not support the cert?

  2. If it is likely that the vCenter is not to trust the cert how to install the CA certificate root in the keystore on the vCenter? The PSC has already he is and trust her, otherwise she would not distribute certs kindly signed to esxi hosts.

  3. the cert that was issued for MUV has the VUM server's dns name in the part of the cert SAN but not in the issued to. Who is likely to be a problem?

  4. the CSR that has been generated for MUV did not come from the VUM server, instead, it was made from the workstation where he has installed OpenSSL. Who is likely to be a problem?

  As a side note KB 1023011 has no mention of being the right process for 5.5, 6.0 let alone!

  Thank you very much

  Girardot

  Hello

  I managed to solve this problem by adding intermediate CA on the end of the rui.crt.

  See you soon,.

  Girardot

• Replace special characters in the FDF

  Hello

  I've looked everywhere and can't find the answer to this simple problem.  I can handle javascript in an HTML environment using free scripts, but it is not so easy in a PDF form.  I use Adobe Acrobat 9 Pro and I have a form that once completed and submitted, generates and sends a FDF file.  I use a script on the server side, called FormGenie do this and the script hate parentheses and some other characters, they break the FDF file.  Everything I want to do is set up a document level Javascript that find and replace all instances of these special characters with something license as a hyphen - or just a space.

  I tried:

  function clearText() {}
  document. FormName.FieldName.Value = filterNum (document. FormName.FieldName.value)

  function filterNum (str) {}
  re = /\$|#|~|\%|\*|\^|\(|\)|\+|\=|\[|\]|\[|\}|\{|\;|\"|\<|\>|\?| \|| \\|\!| \$/g;
  remove special characters as ' $' and ',' etc...
  return str.replace (re, "-");
  }
  }

  and

  function clearText2 (str) {}

  stringName = stringName.replace (/------$| #| ~ |------% |------* |------^ | \(|\) |--------+ |------= |------[|------] |------[{|------} |------{|------; |------"|"}]) ------< | ------> | \ ? | \|| \\|\!| \$ /g,'-');
  }

  I know that these are not good, but I have to be at least barking to the top of the tree on the right.

  Can anyone help?

  Thank you

  You create the form in Acrobat or LiveCycle Designer?

  In general, you can place a script typo in the script of the text of each filter field field hit, in the case where something replacing the user typed with something else would not cause the concern of the user. An alternative would be to be implemented a script that parses the fields just before the submission form action takes place and not to replace them.

  For example, you can use the following JavaScript typo customized for text fields created in Acrobat:

  If (! event.willCommit) {}

  Event.change = event.change.replace (/ [------$# ~ %------*------*------^ \ (\)------+=------[\]------{\};------"\<\>\?]) \ | \\\ !] /g, "-");

  }

  and it will replace these characters when the user types the data into a text field. May not include all the character you want replaced, but you should get the idea.

• macOS Sierra alternative text

  I upgraded to macOS Sierra of El Capitan, at the end of September and now my list of replace text does not appear in system preferences > keyboard > text.  The list is available and works on my iPhone 7 (iOS 10.0.2).

  I have repopulated actually manually list on my Mac yesterday and today, the list is completely empty (once again, completely intact on my iPhone).

  I tried to switch and system preferences > iCloud > iCloud drive > Options > Preferences.app system on my Mac without success but also by ensuring that this edition > Substitutions > click on the replacement text 'on' in applications where the replacement text is frequently used (Safari, Messages, etc.).

  For any help or suggestion would be greatly appreciated!

  macOS Sierra

  Version 10.12

  MacBook Pro (13-inch, mid-2012)

  2.5 GHz intel Core i5

  16GB 1600 MHz DDR3

  399 GB of available storage

  Next time you go to the trouble to put them manually, export them by following the instructions in

  How to export and import substitutions of text on your Mac - Apple Support , then you can at least re - import them, rather than the tedious process of re - to manually enter their new.

• AUTOFILL DIGITAL SEQUENCE

  Spreadsheet Numbers: how, please, can I fill a single column in a single digital series from 1400 and goes to 3000?

  in the cell where 1400, replace the contents with:

  = 1400 + Row)

  Suppose that it is cell A2

  shortcut for this:

  A2 = 1400 + Row)

  Select cell A2, copy

  Select cells A2 at the end of the column, paste

• OSStatus error 22

  I noticed recently that my Time Capsule, Apple stopped Airport, my backup files.  I tried to connect again using time machine with no luck.  In addition, cannot access the additional drive connected to my time capsule.  In addition, my air-printing capabilities does not work through the network of the time capsule but works if I set up access via my IP provider network.  Finally, I disconnected my ethernet cable to make sure that wasn't the problem, ensured that my computer was connected via my wifi time capsule and tried to reconnect.  No chance!  Get the message 'error OSStatus 22'.  Can someone advise?

  Thank you

  Rick

  OSStatus error 22

  I think it's just a network outage.

  Pondini has most common errors covered... even if it is quite old and some editions of OS X to date.

  http://pondini.org/TM/troubleshooting.html

  The failure is not uncommon on El Capo... Not at all.. the best thing to do is a complete the TC factory reset and start over.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer

  1 use names very short < 10 characters please... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important... seen deriving from intellectual property in all directions when OS X has DNS issues and cannot find his own name 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually. In El Capitan, the instructions are slightly different. You can do so directly via the main screen to search using the box right below the search.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  It is very important... and with some ISPS now move to IPv6, we may need more information as your provider of access and current modem type.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

• MacBook Pro Support - please help

  My MacBook Pro is in repairs since one and a half years. The problem is continuous Frost, blue and pink, fuzzy screen. Tech Center have already changed the card logic 4 times, keyboard, speakers, high & low Carter, battery and an optical drive in year 1. The last repair has been there a month where they replaced the logic board again, and now, the problems started again - freezing, pink/blue screen flashing while watching videos online, speed reduction (literally everything in slow-mo), fan operates at its maximum speed, and all this happens when only one or two browser windows open without any comprehensive process running on it. In addition, it was formatted several times over the past year. Whenever I have contact support they go through the same process again and again. Please let me know if there is any way I can communicate with upper management to find a solution, I'm really frustrated and tired with the product and the process. Any help would be appreciated.

  Feature: MacBook Pro (retina, mid-2012)

  OS x: El Capitan Version 10.11.14

  Thank you.

  Dear Sir: we are only a user forum. Apple doesn't have much to do with us at all. That being said, you can do something. Contact Apple directly for help. Save all documentation and be polite and patient. IF you have Applecare you may be in luck. Apple CAN and MAY in its sole discretion will replace a Mac that had a lot of repairs and still does not work properly. The opinion I wrote CAN and in capital letters. This does mean that it is possible, but not 100% guaranteed. If you bought your MacBook pro with a credit card, your warranty may have been extended. Perhaps, it is covered by home insurance...

  Anyway, you have nothing to lose by trying... Have you tried to go to this place "Tech Center" and asking to speak to a Manager or supervisor?

  just a suggestion

  John B

• iPhone 5 stuck in boot loop

  Hey everybody, I recently encountered a problem where I replaced one of my friend 5 iPhone battery and when I plugged it in to charge that he was stuck in a boot loop cycle. The Apple logo appear and disappear over and over again and never start.  I then read a lot of forums where people have had the same problem and tried a lot of things.  I even tried to put several other types of accumulators in the farm of origin, including, and none of them would allow the phone to initialize.

  I solved this problem by putting the iPhone in recovery mode where then iTunes could recognize.  I then did the update (not recovery) that was available, because do not get rid of all the data on the phone.

  I got a weird error that doesn't seem the case on internet "iTunes unable to connect to the iPhone. The value is missing.

  

  But the update worked!  Then I later discovered that my friend tried to update his phone when he died (battery was flakey, so why I replaced it).

  So if someone has ever an update failed and an iPhone stuck in a boot loop, just put in recovery mode and update the firmware from iTunes.

• Mac Mail will constantly be disconnected with Time Capsule

  It has been ongoing for more than a year: I the time Capsule AC version (bought fall 2014) and uses a Macbook (version slim retina released in March 2015.) 12 "I am constantly the mailbox in offline mode in the Mail from Mac application.  The status bar displays "Error of account" and when I click on the error box, it gives the following message:

  DRAW THE ATTENTION OF

  There may be a problem with the mail server or the network.  Check the "iCloud" account settings or try again.

  The server returned the error: connection to the server "p15 - imap.mail.me.com" on default ports has expired.

  If I temporarily turn off Wifi and turn back on right, the error messages disappear and download new messages.  Everything works fine for a few hours, and then I start to see those! exclamation points! next to my mailbox.

  Initially I thought it was a problem with the Macbook.  They did a replacement under warranty of the wifi module into the Macbook.  Still the same problem.  So yesterday, I noticed that my iMac 27 "retina is sometimes as well.  And also, it is fixed temporarily by activating / disabling wifi on and outside.

  Interestingly, my business partner, who has the same version AC Time Capsule and retina macbook 12 "even I experienced the EXACT SAME SYMPTOMS in his house.  (Mailbox log in Mac app, remedied temporarily by activating / disabling wifi power).

  It's to drive us both crazy.

  Both have tried to remove the email accounts of our Macs and rebuild them.  Still the same problem.

  Is there a problem of connectivity between the time Capsule AC and some Mac computers?  I do NOT notice the problem when I'm connected to all other routers in other locations and mobile.

  If anyone has a thought on this, I would appreciate it a lot.  I am about to replace my Time Capsule with another brand of router in order to solve the problem, but all other routers are so ugly and I don't want some Darth Vader looking black thing with 8 antennas in my living room.

  I assume that you are running the latest OS to el capitan?

  The iMac is also updated for later?

  El Capo had e-mail problems... so I assume also that you have updated to the latest patch.

  Your experience with the laptop when you suggest that mobile are still correct... It is the TC at fault.

  There are known problems happening... not universal, which is a shame because then it would be imposed on Apple to fix... but it is not uncommon.

  I would recommend a reconfiguring of the TC... See the list below.

  I understand your network a little better.

  1. what modem do you have? Brand and model please.

  2. your ISP using IPv6 or spend now?

  3. is the work of TC as main router or bridge? (The answer might be inherent in the 1st quarter, but if it is a modem router I need the exact details).

  4. is the modem, also located in your living room... If you run ethernet instead of modem, a router could be installed right next to the modem... and the TC has changed to the bridge? It can work perfectly as a WAP right and for the TM backup when you remove its role in the delivery.

  Darth (breath in) Vader (exhale) Asus or Netgear router... which I suppose you don't not aesthetically... get to work extremely well.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels like this also seems to help stop school dropouts. (I recommend you do cela.. 2.4 ghz 11, 9, 5 GHz use 36 or 149)

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... (It was mostly from the Mavericks)

  Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually. (Expired for El Capo... just use Finder...) Connect the box below search)

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. (Depends on your ISP and if they moved to IPv6.. e.g. comcast).

  For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  In the TC configured only IPv6 local link... assuming you're on IPv4 yet.

  

  It is very important with some ISPS like cox cable at this time.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  These changes could amount to little more... practical household good network... but I salute them as a starting point.

  It's going to ruin your Time Machine configuration... So if you change the TC its location in the network name must be passed to TM... so open TM preferences and put the backup to the new location. TM will then say that he will make a new backup... once he starts, he will find the TC and original backups... check it out... and then do another differential... so no problem. If you are prompted to you want to use the old and new locations of backup just say a new.

• Satellite A300-1i4: FN + F8 only controls the BT and no WiFi

  Hello

  Recently I have bougth a Satellite A300-1i4 where I replaced the original OS to Vista Ultimate, but since then, then I think that something is missing when I press FN + F8 key combination.

  I can only see and manage the bluetooth.
  Will not also be possible to manage (market / stop) the connection of wifi card?

  Any ideas?

  Thank you
  StoneH

  Hello

  Have you already tried to reinstall the package of value added?
  I found a newer version of value added package 1.1.19 for Vista on the European driver Toshiba page.

  Choose your model of laptop Satellite A300 - 1I4 PSAGCE and download and reinstall.

  Notes; First remove the old version!

  Good bye

• Satellite A660 - beep sound stuttering during the use of Player multimedia CD player

  I have a boring beep and stuttering (music is delayed momentarily every few seconds, type electronic interference noise) when using the media player or CD player. I took the laptop for a repair under warranty where they replaced the motherboard without success, they then informed me that they believed that it was a software problem, and a reinstall of Windows 7 was necessary if I've done the following with the recovery disks that I created in that order, results in parentheses;

  -restore the factory software (no change still beeps and stutters)
  -formatted the HD (initially, I thought that solved the problem but after beginning dload and install about 80 Windows updates the question came back)
  -formatted the HD once again (once more I thought that the problem has been resolved, but I heard the beep/stuttering only once or twice)

  Given this HD format takes 26 hours, I will not begin to dload/install updates including Windows 7 until I can try something else or have an answer.

  If anyone can shed some light on this issue, the noise is terrible review it was purchased as a unit of entertainment media playback.

  Thanks for any help in advance here.

  Post edited by: vite11i

  Where the beep from exactly? Speakers or elsewhere?