While pc sleep it lights itself, why

Similar Questions

• Mid-2010 MBP loses battery power while you sleep

  Hi everyone, I have replaced my MBP unibody mid-2010 with a spare battery and the laptop battery lost its battery power very quickly, during normal use and while you sleep. I contacted the manufacturer and they sent me a different battery, and the same problems continue to occur, so I suspect that something is wrong with my computer at this point.

  Above all, I had a second replacement battery installed when I wiped my computer clean and made a new fresh installation of El Capitan and the problem persists. The drain of the battery during sleep is even worse, it goes 100% to near depletion in a few hours.

  I have read several threads on these issues but can't seem to find the one that matches my computer behavior or specific settings. I'd love some help troubleshooting this! Can someone kindly walk through diagnostics on this for me please? FYI I already have:

  (1) the drive repaired/checked permissions

  (2) reset the NVRAM

  (3) reset SMC

  Thank you all and happy new year!

  First, not all replacement batteries are at the height for use on portable Macs what OWC at macsales.com has batteries that are. The other thing is in what regards the battery life is what you do. As these effects for how long you can run on battery power only.  Ranging from light to moderate to heavy use. If you have things like an anti virus program on the MBP. It will run in the background. And to a certain extent, even in standby mode. That will exhaust the battery. Mac do not need anti virus programs. The amount of programs running in the background is all to one degree or another effect battery life.

• AirPort Express has blinking light yellow - why? What should do?

  AirPort Express has blinking light yellow - why? What should do?

  There are many possible causes. Click here and follow the instructions.

  (143275)

• T430 heating while in sleep

  Hey guys,.

  I am a new user of Lenovo, come buy my T430 this week.

  After you install all the software that I need on my laptop, I closed (sleeping) and put it in my bag back. I needed only after 2 days. When I hit the bag, it was already hot outside, I opened it and my Lenovo raged... I turned on my computer, the battery is down to 13%, from 100 percent (2 days ago), which is kind of funny that he was asleep, I would have suggested he use about 10 to 15 percent in two days.

  my questions are:

  1. is the heating thing normal while you sleep? What could have caused the problem?

  2 is it possible that certain parts of the computer has been damaged in such a warm atmosphere? (Note that I kept it in a closed bag)

  a possible solution to the question 1: I ran a command prompt, typed in the code that tells me what is allowed out my computer. noticed that the mouse Logitec external and giganet Intel networks have been allowed, so I disabled them both. It was probably the mouse as it was in the same bag, I guess it was moving in the bag and wake up the computer?

  Thank you in advance for your help!

  No, it is not normal. You must set "Timer Wake with battery operation" to "Disabled" in the Bios. It can be found in the Config-> Power, first setting.

  It seems that you escaped without consequences for the moment. Be more careful, turn off the mouse when you're not using it.

• Z5 Premium battery drain while you sleep

  Hello

  I was the performance of battery loging for awhile, and I noticed that there seems to be little difference between the drain when using and the drain while you sleep.

  Last night my battery fell over 50% to 100% without any [major] at the time of the screen. The phone has been completely disconnected from all radio interfaces and everything should have been sleeping.

  I have a white list to alow my smartwatch 3 to work when the phone is asleep, but these are things like the Google services.

  The stats of the battery for the period when the battery went down shows.

  10% Android system,
  Operating system Android 7%
  Watch cell 3%
  Screen 3%
  Phone idle 2%
  Media server % 1.

  I don't really code that much more, but if this where a system I was debugging, I would be suspicious that Android and Android OS systems use such a big chunk of power while the system should be asleep and waiting to be activated by the interface remains alone, the connection of the cellar!

  Any thoughts on this [official or not?]

  Barry

  Tell you what, lets just call it closed should we!

• HP split 13-m110dx Tablet window logo light remains lit while you sleep.

  When I split the tablet of the keyboard, the lego window lights. Even if the Tablet is sleeping. There was a discharge of the battery of 26% in an hour and he was asleep. From time to time the screen would come back and go back asleep. I have the hp split 13-m110dx x 2.

  Hi @mikjben, welcome to the Forums of HP. I understand that your Windows button remains lit when detached, even in mode "Eve".

  Try the configuration in hibernation, to see if the button turns off then: Manage the power (Windows 8) Options

  If this is not the case, go through power options and see if there is a specific entry for the Windows button. Let me know what you come up with.

• Why does my computer loudly play ads while we sleep?

  I keep my computer at night with my Inbox down to the toolbar and MSN down on the toolbar.  Almost every night a few utilities STRONG lights and awakens us.  I have to turn my speakers down every night!  Sometimes during the day, but at night it's really bad.  There is no image, only my screensaver on the screen.

  Great answer Gerry,... nice solution ;-)

  You have downloaded and installed a plugin for MSN by mistake at some point. As well as your antivirus running, run a program malware and spyware, deleting anything whatsoever that you have not installed.

  I do not use MSN, but if there is plugin options to this disable those you don't know that you do not use. Eventually get rid of them.

  See you soon,.

  Jerry

• Satellite A300-1ed freezes while mode 'sleep' in XP

  Hi all!

  Sorry about my English... Well I have a problem with the gel under XP.
  I did a downgrade and everything works fine except when I try to restart or to sleep... then it freezes... sometimes... not all the time... someone knows how to fix this problem or does anyone have the same problem like me?

  Spec

  BIOS is 1.60... (on Toshiba download page is 1.50 for Xp)
  Double heart 2390
  ATI 3470 256 MB

  Enjoy your life while you can :)))

  Check the event viewer in Control Panel-> administrative tools to find errors.

  Make sure that the drivers and BIOS are updated. Check the Drivers section on the Toshiba site.

  If you have installed a printer or a Scanner, try to remove the software.

• Use of data while you sleep at night

  Ill be sleep at night and wake up with a text saying I used data while he slept. I've got data unlimited, so it is a problem for me. I close my apps when all the time throughout the day and especially at night. I am connected to the Internet and considering all applications are closed that he shouldn't have to data. Ive already used 90% of my data and I have ten days he remains until Bill again.

  SO while he slept connected to Internet with NO open apps I use my data...

  heatherbarry wrote:

  Ill be sleep at night and wake up with a text saying I used data while he slept. I've got data unlimited, so it is a problem for me. I close my apps when all the time throughout the day and especially at night. I am connected to the Internet and considering all applications are closed that he shouldn't have to data. Ive already used 90% of my data and I have ten days he remains until Bill again.

  SO while he slept connected to Internet with NO open apps I use my data...

  If this text from your carrier, it does necessarily mean that data are used as you sleep. This may mean that the company will update its system at midnight (or another time), and then sends the message.

  "Closing" applications from the recent state bar has no effect on a large part of what whatsoever (unless the application does not work correctly). Generally, there is no reason to waste your time doing this.

  Check the settings > General > background App refresh and turn it off for all the apps you don't think you need to do the update when you are not using the. Disable notifications for the applications that you really need not notifications use data.

  Make sure you're phone is plugged into the night. If you have it turned on but not plugged in, the phone will return to cellular data once the screen goes to sleep.

• Power settings to share media while you sleep

  Original title: sleepless nights in San Diego

  I experienced all the power settings, equal to share media during sleep and put it in my list active idle is disabled and unavialable... What are you doing to move again and why can't solve this find and fix this problem?

  Hello

  1. were you able to set this option before with no problems?

  2. you remember to make changes to the computer before this problem?

  You can check out the following link and try the steps by Marilyn - Support Engineer Tuesday, March 24, 2009 and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/computer-wont-sleep/a8622d8f-1529-4DC3-8535-1ab8cddab9ac

  Hope this information is useful.

• Screen remains black, while all buttons are light

  original title: serious problem with my computer!

  I'm trying to fix my computer because something is obviously wrong with it and I'm not very good with computers, so I don't really know what I'm doing, and I think I might have messed up even more now.

  Recently, I tried to back up my files on my d drive but he said he couldn't because my c drive was damaged so he told me I could fix it and I tried, but he says he couldn't when it is in use and told me to program it so that he could check it out when I start then my computer. Then I restarted my computer, and every time I restart my computer, it has a problem back on. The screen remains black then that all the keys are lit and then after a minute or two, it hangs, and then she did it again and again until I have press and hold the power button to turn it off. I have to finish by wait 5 minutes before turning on so it lights correctly, otherwise it will just do that again.

  Then he started toward the top of normal, of course I know what the disk check thing looks like now because what happens now, but before it has not then I thought it did not work and as a last resort, I wanted to wipe my hard drive clean because I tried everything I could, and I don't have the money to fix right now and probably won't for a while. So I followed all the instructions for the recovery of the system and none of the other stuff worked and I decided to go with my disk wiping hard completely clean and restore factory settings. I followed all the instructions and then it turns off my computer, trying to wake it up, so his restart of course, but he does what its been recently when it restarts and crashes.

  If I turn it off and wait a few minutes, then turn it on and I was really upset at that time here because I thought that it did not work. Its starts upward and there appears the disk check thing and it says system files verification on c: responding file type is NTFS. __Cannot volume open for access.__windows live has finished check the disc. then goes to the login screen I open a session, but then the screen is black and the only thing I see is my mouse. It was like it maybe 30 minutes or more, and I didn't know what was happening so I turned off and then tried to turn it on and it does the same thing next time. I thought that maybe when he crashed he screwed up the process, or perhaps checking file system on c drive messed up. So when I had the chance, he finally started upward and I connected again but this time on the user prompted and everything was still there but it was EXTREMELY slow, as it took maybe 10 minutes or more to open what anyone and it loaded really slow when I logged in. I finally made the thing about system recovery again after a few hours of waiting so he can keep loading, cause whenever I clicked it, it does not always work. And then it's the same thing all over again. He obviously never erased from my hard drive, so I probably * my computer even more, and then it was already * upward and it was a gift, so I would really like to fix so if someone can help me maybe I would really appreciate it!

  Hi TeresaBilski,

  ·         How have you tried to reinstall the operating system?

  I suggest you erase the hard drive and do a clean reinstall of Vista. I would like to ask if you still have the boot floppies for Windows Vista that came with the computer. If this isn't the case, you will need to get a.

• Pavilion g6t locked up, while you sleep, when you close the lid, or try to power off

  My Pavilion g6t crashes when the screen turns off, or computer goes to sleep, also is not out with stop-power function.  Power light stays on, only is to restart the computer to completely turn off with power button / stop, and then re login.   This happened just after a HP recommended Refresh, any ideas?

  I went back to the HP driver downloads support and ran an another Bios Update.

  Alto, the computer began to work properly, the screen will be lite to the top of the keyboard.

  Once asleep, wakes you up by button tapping power and computer stops correctly.

  HP/Microsoft should seek to solve the problem of no compatibility with Bios level and

  other 'stuff' in the computer.

  Thank you

  Glenn

• How much battery is used while you sleep?

  Laptop Toshiba, Win7.

  Unofficial tests on a Lenovo ThinkPad T61p (Windows 7) d MacBook

  http://Lifehacker.com/5526542/how-much-battery-life-does-sleep-mode-really-drain

  FYI - Windows Vista power management

  Standby mode consumes battery power, although much less than normal on the State. If the computer is in "sleep" while being powered by the battery and the battery charge runs out, the computer turns completely off and lose the open programs and documents in memory. In this case, any changes to documents which were not yet recorded on the disc would be lost.

  Hybrid sleep provides an extra measure of convenience. If the battery of the computer becomes completely discharged when the computer is in hybrid sleep mode, the state saved in the computer's memory will be lost, but Windows will be able to recover the state saved from HDD - although a little more slowly.

• While you sleep, how the Droid says "full load" status once the loading is done?

  Hello world

  During the load, assuming that I'm not using it for other reasons at the moment, my Droid goes to sleep.  Thus, although it may flash a small green light next to the Power/Lock button if incoming is a message waiting for me, or show a red light it when the battery becomes weak, the droid status 'full charge' somehow like that once the loading is done and if so, how?

  Please note that, Yes, I'm aware that if I use it, the battery indicator screen will be completely green when it is fully charged.  However, I wonder when the Droid is asleep, because I see that the indicator unless I pressed the Power/Lock button to wake up.

  Thank you very much!

  Sincerely,

  Bram Weiser

  Yes it is, but look for.  When you plug it in to charge, you will see a white light where you connect the power cord on the phone.  At full load that the light goes off.  As I said, you'll have to look at the Droid.

• Tecra S10 - 11W: WXP SP3 stuck while entering sleep mode

  Hello people,

  I bought me a Tecra cos it came with a version of windows XP.
  Next to the strange effect once launched, it consumes about 800 MB, instead of the usual 300 MB, the system suspend frequently ends up in a kind of State of transition.

  I checked the definition wol bios, I changed it to disabled. (still wondering why it has been activated by default on a laptop)

  I went through all the 174 updates per DMS.
  There is still no improvement.

  For the most part, the sequence is like this:
  -cold start
  -to suspend by powermanager in 15 minutes unattended
  -wake me
  -to suspend by my
  -wake me
  -suspend again and display the message: "Please wait, windows is now ready...» "infinitely

  Well well... until the battery is discharged or I pulled the plug

  Ah. Do not get to an answer from HP as: "this is the first time we have ever heard of."
  I have two other Tecra. running latest version of XP all had the same bad habit.
  Moreover, using hibernate generates the same result.

  Hope one of you can help out me.
  Thanks in advance
  Max

  Hello Maxtor

  As you can see, this is the forum user and there is no answer HP or Toshiba.
  We are here to discuss about the issues described. If you wish to discuss with the Toshiba people that you're on the wrong place here.

  Return to describes the problem: I've heard of these issues, but it is not specific for certain model of laptop. You must understand that your configuration of the laptop and pre-installed software does not for us and it is not easy to say what may be responsible for this.

  Until we start to discuss, I would like to know if you have noticed that the same with factory preinstalled operating system. With own OS preinstalled, there are no software updates or anything else that can run in the background and blocks suspension mode.

  Have you tried to put an end to some of the laptop before running process comes into hibernation mode to see if that will help?