Why dreamweaver cannot resize columns long field name?

Similar Questions

• Why Dreamweaver cannot have an interface of type Muse

  Why Dreamweaver cannot have an interface of type Muse so we can have only one program instead of two, most of the features of Muse are already built in Dreamweaver. I think that the advantage of having the two harvesters will benefit all users at all levels. It would be very fair to be part of the presentation of the workspace

  They have two completely different programs, designed for two completely different audiences.

  Muse is essentially a new GoLive and should remain its own program, separate from DW.

  Combining them would cause half Adobe target demographic to lose their collective minds.

• Extract ODBC data Long field names

  I need to extract some data created by the 4 lookout data logging (files .thd).  Is it possible to do so. I use a PC that does not have installed belvedere, I only database files

  What I got so far is to export some fields whose names are less than 62 characters (using the program Logos 4.5 and driver ODBC database of 4 of Citadel by strict limitation of the field at 62 names). If I increase the limit to about 100 required to extract all the fields I can't export to Microsoft Query or any other software (which supports the import of ODBC database). I've tried several programs but usually they jump a message you can read that one point in time (or they do not see the fields or values at all)

  Please, can you tell me a way I can extract the data?

  The lifecycle of database is not applied in an aggressive manner. The database do not try and remove data simply because life has expired. On the contrary, the life expectancy is applied only when new data are currently recorded in the database and the log would need to increase the size of the database to store incoming data. The rate at which data are removed from the database may vary according to the rate at which new data are recorded in the database. If the frequency of recording is slow, it may take a long time for the data to be deleted.

  J.D. Robertson

  National Instruments

• Why Dreamweaver cannot connect to my remote server - I use ftp.

  I made changes to my site (I am a user of type copy / paste, without a lot of knowledge... but enough to get what I need).  I use a Mac and I have Dreamweaver CS6.   I downloaded a few pages of changes successfully.  Then, I tried to download the next page and received the message that Dreamweaver could not connect to server - with a list of possibilities of why I couldn't.  I had the help of my website host support team and they have been able to connect to my ftp server.  I was also able to connect by typing in ftp.website in Safari - however Dreamweaver does not connect.  I went through all the troubleshooting tips, which were extremely easy to follow and I have upgraded to Dreamweaver.  I can not connect.  Anyone had this problem before.  I'd appreciate some advice.

  The time I saw is that the username and/or the password is not correct. I recently had just the same problem and I didn't have my correct password. Get with your hosting provider and check (types each on independent) these two. I have big fingers.

  Jim

• Why we cannot create a folder with the name con

  Hello Sir,

  I wan't to know the reason for why we cannot create or rename a folder with the name "con" as the other folder names. But I know that we can create this type of file using cmd.
  Thank you.
  Mihir Mani prasad

  CON is a reserved word and cannot normally be used as a folder name.  This also applies to: PRN, to THE, NUL, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, and LPT9.

• Cannot decompress web complete sample application catalog because too long file name.

  I have OBIEE 11.1.1.5 installed on a Windows 2003 SP2 environment, which installs SampleAppLite. I wanted to install the sample full application I downloaded Oracle. When I tried to unzip the provided catalog with the complete sample application file, I received errors of WinZip. I have determined that the cause of the errors is a too long file name. The length of the path and file name exceeds the limit of 255 characters in windows.
  
  Anyone else tried the complete sample application on windows?

  Karen,

  This can happen for SampleApp as well as for the installation of Oracle BI Apps on Windows due to a setting of configuration and limitation of Windows.

  My opinion is that the Oracle BI PM team really built OBIEE 11 g Linux first and then Windows is a minor version.

  However, to solve your problem, configure your environment as if it'll be a deployment locally to bracts and create a shared near the root folder. Then the em Console merger change the RPD deployment tab to a location 'sharing' and also to adjust the assignment of web site catalogue.

  Thus, for example, on your C:\ drive create the following structure

  C:\
  -OBIEEShare
  -THE RPD
  WebCat-
  -GlobalCache

  Then do C:\OBIEEShare a shared folder so that it can be accessed through the following UNC, \\machineName\OBIEEShare\

  Place the SampleApp DPR on the course of \\machineName\OBIEEShare\RPD\
  Place the SampleApp WebCat folder on the \\machineName\OBIEEShare\WebCat\ course

  Now in do it Fusion Console EM the shared location for the RPD is \\machineName\OBIEEShare\RPD\ and the location of the web catalog is \\machineName\OBIEEShare\WebCat\SampleApp

  Transfer your file SampleApp.rpd and enter the correct credentials.

  Restart the necessary components and you're done.

  See you soon,.
  Christian
  http://www.artofbi.com

• How can I change how long file names & file can be?

  How can I change how long my file names & file can be?

  The path length limit cited in the article referenced by Abdul R is 260.

  It depends on the length of the full path to the file (for example, C:\Program Files\filename.txt). Windows limits a single path to 260 characters. That's why you can sometimes get an error when copying a file with a very long file name to a location that has a longer path than the location of the original file.

  -------------------------------------

  However, there are various subtleties that reduce that number in practice to 255 (or less), including all spaces.

  We start with the absolute limit imposed by Windows. The API operating system puts a limit (called MAX_PATH) 260 characters for the display name with the included path. This number is often cited. However, the current limits are smaller due to various other restrictions. For example, all names have to have a terminator at the end normally null only the computer see this fine marker, but it is considered as a character if there are really only 259 characters available. (Forget to count the null terminator is a common mistake). A three other characters are used by the designation of the drive or volume (for example, C:\). Thus, the limit to name all the folders and subfolders as well as the file is reduced to 256 characters. However, no files or a folder may have a name more than 255 characters. This includes spaces and some backslashes used as separators. This limit of 255 characters per object is imposed by the way Windows to encode the characters but other considerations usually impose lower limits.

  of http://vlaurie.com/computers2/Articles/filenames.htm

  ---------------------------------------

  More details

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa365247 (v = vs. 85) .aspx

  =====================

  And now, the grand fanale, the answer to your question:

  You cannot change the limit of the length of the path. It is imposed by various requirements and is coded in the system hard. You can set the 'balance' between the files and folder/sub-folder names. For example, use short directory names in order to use more long filenames.

  ======================

  All this can be a nuisance to the user. A file name may be OK when originally created but be too long if the file should be copied or moved to another location whose path is longer.

  There may be additional complications if the files are to be burned to CD or DVD.

  Tom Ferguson

  Italics are added. They indicate a source citation as indicated.

  TF

• Why should I Resize Windows Media Player, whenever I open it?

  Why should I Resize Windows Media Player, whenever I open it?

  First of all, I apologize because clearly, nobody else here knows what you're feeling :)

  The problem is in fact a function: If you open a file (such as a video) directly, WMP opens directly to the ' Now Playing ' screen to display the video (the video can not be displayed in library mode where it lists all the files).  It is locked, you cannot change this behavior (because I'm sure you would agree, everyone would complain if they could not see a video playing every time they played, of course!)

  But what you can do, there's WMP to always be the size you want!

  (1) play a video in WMP.
  (2) while the video plays, click anywhere in the video and uncheck the option 'Fit Player to video'.

  WMP will attempt is no longer to adjust its size whenever a video is played.

  If this was helpful, please vote. If it solves the problem, please click on propose as answer. Thank you!

• Impossible to copy due to 'too long file name.

  When I copy a collection of folders & files from an external USB key from 1 TB to the NTFS format for a 2 TB drive internal SATA also formatted NTFS, I get an error message indicating 32 files cannot be copied because of "too long file name.  As both drives are connected to the same computer (OP system Win 7 Home Premium 32 bit) I do not understand why?

  I realize that I could track down files with long names and shorten the but they are among the other 10,596 files in 700 Folders & subfolders, the path to the files would be the same on the drive, i.e. drivename:\music\album\filename, they have copied successfully for another internal drive to the external USB drive but won't copy from the external disk to the internal drive of my PC.
  Anyone could explain why this is.
  Thank you

  See this: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/53779044-d453-458b-b8c4-96d41711ea69/

• How can I feel Dreamweaver files / printing no longer seems to work on MAc

  How can I feel Dreamweaver files / printing no longer seems to work on MAc

  Code print function has been removed from the PCOC (not exactly why).

  You can help bring back by submitting a request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

• installation of the software gives an error 1320, too long file name

  During the installation of the CAD of DraftSight software on a system running Windows 7 Prof I get an error message 1320, too long file name and the software cannot be installed.  A work around DraftSight suggested to rename the data folder C:\ProgramData\Application, DraftSight installation and then restore the original name of the file.  A second workaround was to delete the folder, install the program and then restore the folder.  A third workarounds solution had to drag or copy and paste the Application Data folder on the desktop, install the software and then return the ProgramData folder in the directory.

  For Windows 7 teacher the problem with alternatives a & is the shortcut to the application data to other programs is lost when the name or the file is restored, leaving only an Application Data folder and delete the shortcut.  The problem with the three workaround is that the shortcut cannot be dragged or cut and paste on the desktop.

  How can I temporarily allow the program to install and create a folder of Application data in the ProgramData directory and then move the program information in the folder the shortcut pointing to?

  I would also like to know how to get the same result with Windows Home Premium where the Application data file is not a shortcut, but is actually a locked folder.  I would need to enter the locked folder information on the program.  Some users of DraftSight say the two alternatives have worked for them and I suspect that they may work for Windows 7 Home Premium, but the impact on other programs may not be obvious.

  When you try to install the program?

  Assuming that you have the ability to choose where to install the program, you can try to shorten the location.
  For example, you can try to install to C:\Program Files\Draftsight\ or if necessary C:\Draftsight

  If this does not work, there is nothing that we will be able to suggest other than to contact the developer again. Change the ProgramData folder should not affect this type of problem and the only thing that is likely to affect the writing on the application folder data would be the length of your username, but even then I would feel that the application is something wrong in this case.

• Try to copy the corrupted user profile profile settings and I am met with the error message "too long file name!

  I tried to connect to my laptop today and instead of recording in the usual way a message that windows creates new office settings. When he finally connects me I get a message of bubble speech saying I was connected to a temporary profile, I reboot several times and the problem persists. After a little google research, I realize my old profile is probably corrupted... I have not downloaded a new software/hardware.

  I followed the steps of miscrosoft to copy the files from my old profile to a new user, everything in the file transfer went well until the last few files to copy. Then, I get this error message saying "the file names would be too long for the destination folder", only two options are cancel and skip available. Which are useful.

  I do not recognize these folders that are too long (the names are the random letters and numbers), I tried to look for them, nothing is done. And to be honest, I don't understand what that means.

  UPDATE: I decided to copy folder a bit at a time and it solved my problem, that all the files were copied successfully. However, now I was struck with a new problem. Whenever I try to access my files, I get a message that says windows cannot access the specified device, path or file. You may not be authorized appropriate. How can I fix it?

  
  

  It comes to my laptop and I administer it / have access to passwords, etc.
  

  It simply means that your old account was the owner of that file or folder.  You can change the security to access your new account.  Here are the instructions: http://windows.microsoft.com/en-PK/windows-vista/Troubleshoot-access-denied-when-opening-files-or-folders

  (It says Vista, but the steps are the same for 7).

• Creation of Contact the PHP export leads to failure: field 'name' must be a string value.

  Hello

  I export contacts from Eloqua to my application using the API as a whole. I am stuck at a point where I'm creating export based on my maps of fields as follows:

  GET .../contact/export

  {'name' ": example","secondsToRetainData": "3600", "fields": {"C_EmailAddress": "{{Contact.Field (C_EmailAddress)" "}}" "}}

  and the server returns an error:

  {"failures": [{'field': 'name', 'coercion': 'Must be a string value, at least 1 character and a maximum of 100 characters long.'}, {'field': 'fields', 'coercion': 'Required.'}]}

  In order to ensure that my JSON string is syntactically correct, I copied (very useful) application at http secure.eloqua.com/api/docs/Dynamic/Bulk/1.0/Export.aspx and run it through the server, which results in the same error.

  I suspect that Eloqua does not recognize parts of my application as a string payload. I use PHP to build a table that is then encoded using json_encode(). All the world has known this before and found a solution? Please share!

  Wouter

  OK, my next wag: is the Content-Type header?  It must be set to application/json.  Who met with some of the calls.

  .  Topher

• Field names in batch process

  I can't seem to find a definitive answer or examples of this anywhere, but I have about 3500 filed the names that should change. Is it possible to create an action to modify these field names, or is there at least a better way to accomplish them all individually?

  You cannot rename fields in Acrobat using an automated process. Perhaps only

  with a plugin...

  You must use an external tool to do, or a script that replaces

  each field with a new one with the desired name.

• I can't create a new site of catalyst for business with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with the server, try again later. How can I solve this problem?

  I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?

  Thank you

  Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver.  It may have been a conflict of name or something.

  Concerning

  Adrian