Why error invalid memory access loading newdev.dll

Similar Questions

• I get an error saying "error loading newdev.dll" when trying to uninstall a program.

  I get the following message "Error loading newdev.dll" when trying to uninstall a program. I can't reinstall without be asked to unistall it first. I want to just delete the program

  original title: error loading newdev.dll

  Try this app (works fine).

  http://www.revouninstaller.com

  I hope this helps.

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• WebLogic crash after error 'illegal memory access.

  Hi all. WebLogic application crashed after receiving an illegal memory access error. any thoughts...
  
  Error message: illegal memory access. [54]
  Signal information: si_signo = 11, si_code = 2 si_addr = 0xb5778850
  Version: BEA JRockit (R) R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-l
  Linux-ia32
  
  
  The Weblogic administration Console does not start since the accident of Jrockit. I have attached the startup log failed.
  
  < 8 January 2009 11:13:22 AM MDT > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: java.la
  NG. ClassFormatError: com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
  java.lang.ClassFormatError: com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
  
  
  
  Journal of weblogic admin stdout:
  
  Java home = / ps_opt/wl92/jrockit_150_12
  Ligne de commande java = java - jrockit-Xms256m-Xmx256m-Dweblogic.Chunksize=65536-Djava.util.logging.config.file=/ps_opt/wl92/webserv/myserver/applications/peoplesoft/logging.properties-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Dweblogic.Name=WebLogicAdmin-Dps_vault = / ps_opt/wl92/webserv/monserveur/psvault-Djavax.net.ssl.trustStore=/ps_opt/wl92/webserv/myserver/keystore/pskey-Dweblogic.ProductionModeEnabled=true-Djava.security.policy=/ps_opt/wl92/weblogic92/server/lib/weblogic.policy-Dssl.debug=false-Dps_home = / ps_opt/wl92 weblogic. Server
  Options Java jrockit =-Xms256m-Xmx256m - Dweblogic.Chunksize = 65536
  < 8 January 2009 11:13:20 AM MDT > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:
  /ps_opt/wl92/weblogic92/platform/lib/p13n/p13n-schemas.jar:/ps_opt/wl92/weblogic92/platform/lib/p13n/p13n_common.jar:/ps_opt/wl92/weblogic92/platform/lib/p13n/p13n_system.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/netuix_common.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/netuix_schemas.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/netuix_system.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/wsrp-common.jar:/ps_opt/wl92/webserv/myserver/lib/endorsed/xalan.jar:/ps_opt/wl92/webserv/myserver/lib/pluto-1.0.1.jar:/ps_opt/wl92/webserv/ MyServer/lib/portlet-API-1.0.jar:/ps_opt/wl92/webserv/MyServer/lib/ps_patch.jar >
  < 8 January 2009 11:13:21 AM MDT > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with BEA JRockit (R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-linux-ia32 of BEA Systems, Inc. >
  < 8 January 2009 11:13:22 AM MDT > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: java.lang.ClassFormatError:
  com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
  java.lang.ClassFormatError: com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
  at java.lang.ClassLoader.defineClass1 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:56)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:268)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  at java.lang.ClassLoader.defineClass1 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:56)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:268)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  to com.bea.xbean.store.Cur$ Locations. < clinit > (Cur.java:482)
  to com.bea.xbean.store.Locale. < init > (local .java: 168)
  at com.bea.xbean.store.Locale.getLocale(Locale.java:235)
  >
  < 8 January 2009 11:13:22 AM MDT > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >
  < 8 January 2009 11:13:22 AM MDT > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >
  < 8 January 2009 11:13:22 AM MDT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >

  Hi Nicolas.

  Is this patch for Weblogic 9.2? 92MP3 no patches
  Is what version of Peopletools? 849.09
  What OS? Linux 2.6.9 - 67.0.20.ELsmp
  He broke down at the start? Yes, it will fail when trying to start the administration server

  Let me know thanks

• Error: "Windows did not start because of an error in the software: load needed DLLS for kernel.

  Original title: I HAVE a BLACK SCREEN.  Shows an error message "Windows did not start because of an error in the soft ware: load needed DLLs for kernel."

  I can't boot from the hard drive or Operating System CD.  Any ideas on how to start the system to fix the error?

  Hi FilippoPosato,
   
  This problem may occur if the Hal.dll and Ntoskrnl.exe files are mismatched.
   
  To resolve this problem, start your computer from the Windows CD, and then upgrade Windows on-site.
   
  For more information, see:
  Error message: Windows did not start because of an error in...
   
  More information on:
  Error Messages When you start your computer if Program Files of Windows are missing or corrupted

• Impossible to install FSX Deluxe, receive the error message "could not load the DLL: Gameuxinstall helper.

  Original title: installation of FSX

  When you try to install the FSX Deluxe I keep getting unable to load the DLL: Gameuxinstall helper

  Hello

  What is the version of the operating system installed on your computer (if it is x32bit or x64bit version)?

  I suggest you to contact Microsoft Flight Simulation support to improve the assistance on the issue:

  https://microsoftflight.com/en-us/contactus/

  You can also check out the link below:
  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  http://support.Microsoft.com/kb/910816

  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/641b3933-3C3a-4077-8a1e-e271b3c19a95

  If you use windows x64bit OS Microsoft Flight Simulator x Deluxe is not supported.

  Reference: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&type=Software&s=Flight%20simulator%20deluxe&os=64-bit

  Hope this information is useful.

• The Windows experience index error how to fix (invalid memory access settings)

  I perform index windows as usual and at the end it stops giving me an error and I guess a few months ago it was working fine.
  It stops when the memory test near the end gives the error: impossible to properly assess the disc. The parameter is incorrect.
  If anyone knows what it means and how to fix it please REPLY
  Windows 7 Edition home premium
  AMD athlon 64 x 2 dual core 4600 + 2.40 ghz processcer
  4g RAM
  32 bit
  HP Pavilion

  Hello karimer7,

  Thanks for the return of the response.  Please check the various points listed in the thread below.  There are different options that work for some and not for others.

  Error Windows Experience Index "impossible to properly assess the disc. The parameter is incorrect ".

  Please let us know status.

  Thank you

  James

• Error number: 0x80040702__Failed to load the DLL: FirewallInstallHelper___

  OK, I have a good for you I tried to solve without success either.

  I recently downloaded AOE3 the Warchiefs demo to see what it looked like. When I tried to uninstall it it has failed and says Unhandled Exception
  Error number: 0 x 80040702
  Description: Failed to load DLL: FierwallInstallHelper

  I've since tried everything to remove this but no luck.
  First of all, I tried to uninstall and have since deleted the folder containing all the data of AOE3... Without success.
  I tried to delete all the data of AOE3 with the registry, but that did not help.
  I tried to reinstall a new copy and get the same warning.
  What is more, in the list of programs, it shows AOE3 Warchiefs trial package yet and indicates it is 58.4 concerts?

  Help, please.
  It drives me crazy.

  Thank you
  Mike

  Hi MikeAOE3,

  Welcome to Microsoft Answers Community Forums.

  As you have tried several times to reinstall and uninstall the program, I suggest you perform a disk cleanup as a first step to delete all temporary files from your computer.

   

  Please see the instructions to perform disk cleanup,

   

  1. open Disk Cleanup by clicking the Start button, tap all programs, accessories, click System Tools, and then click Disk Cleanup.

  2. in the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If the Disk Cleanup: drive selection dialog box appears, select the hard disk where you have tried to uninstall the software and then click OK.

  4. click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  5. When you have finished select the files you want to delete, click OK, and then click Deletefiles to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

  6. for more information, please see here.

  After you have completed the steps listed above, please download and install the Windows Installer Cleanup utility to remove installation information for programs that were installed by using Windows Installer.

  ·          This is useful when you have problems trying to remove an old program because the installation files are damaged.

  ·          For more information, please see here.

  If the steps above do not help, I suggest you perform the check and the boot if the problem persists.

  Please check this link on how to perform Clean boot and solve a problem using the clean boot.

  Hope this information helps you.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why would be denied access to hpqcxs08.dll:

  Why access was denied to the hpqcxs08.dll file:

  -You can cancel if you wish.  It is your prerogative to stop smoking.

  You have given little to no information, just resting on a single file.  Then you are referring to your belief there is a kind of involvement of viruses (but no reasoning as to why.)

  You have a HP device any (is this a HP/Compaq?  Do you have/never had a printer/scanner HP connected to this computer? etc.) and why you want to get rid of this file in particular.

  You can delete it - I have no doubt - but I think you should understand WHY you want to delete it before you do something you may regret.

  I want to really just to delete it?  Fine by me - not my computer, I have to fix after doing something like that.  Start in safe MODE and try to delete it.  No go?  Try using "Unlocker" of the to do.  It may require a restart where it can delete the file before it happens "in use" - but...

  Then download, install, update and perform complete system analysis with:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Yes - all this is it FREE.  If you read something else and you decide that they are not free, you're wrong.  ;-)

• Fatal error, Acrobat could not load the DLL base

  Hello

  Since a few days, can no longer lire of the US PDF documents on our workstations. In fact the message error en object appears.

  If we launch adobe reader in Director, it displays a window by writing this:

  Adobe Reader cannot open the file in protected mode due to a compatibility problem with your system configuration. Do you want to open Adobe Reader with protected mode disabled?

  -Open by disabling the protected-mode

  -Always open with safe mode disabled

  -Do not open with safe mode disabled

  I could see that there is a Kaspersky application to fix the problem, but I can't use this product.

  If on installs an older version of Adobe Reader that works (version 9 for example), but as soon as we go back in version 10 or 11 the problem is present.

  Are you it another way pour this kind of problem.

  In advance thank you.

  Hello

  Finally we found the PB, it came from a Microsoft update that has removed from the Colombia in Visual C++ DLL

  Thank you

• load needed DLLs for kernel windows xp home edition

  I tried to put in the disk of OS widow emachines xp home editon, restarted my computer and did a system recovery, chose to do a full system restore (destructive) I just wanted to clear everything and restore the original settings, and now it says windows cannot load beace of an error in the software: load needed DLLs for kernel and I have no idea what to do any help?

  Hello

  Do you have the XP installation CD?
   
  See links
  Error message: Windows did not start because of an error in...
  http://support.Microsoft.com/kb/326671
  Error Messages When you start your computer if Program Files of Windows are missing or corrupted
  http://support.Microsoft.com/kb/812450
   
  If you have the CD of the CD for scratches check, clean the CD-ROM with a soft cloth and try to install the operating system.
   
  If you do not have the CD you can organize a CD borrowed from a friend or a parent and try to install. You can also contact the manufacturer of your computer.
   

• Access invalid memory location during export for iOS error

  I was recently asked to convert an application for us flash on the iPad. When I try to publish the .ipa file, I get the following error:

  Access invalid memory location 0xceip = 0x55492db4

  I have no idea what could cause this and my google search of the error message came pretty empty. If I delete the document class and republish it works fine so I know it has something to do with my code but I don't have a clue where to start looking so I was hoping that someone else had a similar error and could point me in the right direction.

  Thank you very much

  -Ryan

  I was able to understand it through check and guess laborious. Just thought I'd share the bug in case someone else ever runs into it.

  A library third party I was using says try bad catch statements:

  try {}

  catch (Error :*){

  }

  No idea why the original author did it, probably never intended to write "error: *" and release shift fast enough after the "(" mais comme vous pourriez le soupçonne "Erreur" est un nom d'objet réservé à ne peut être déclaré en tant que paramètre variable) "

  When replaced by:

  try {}

  catch (error: Error) {}

  }

  the memory access bug went away. What is strange, is that the incorrect try/catch statement works fine when published in format swf, air or android and is only a problem with the converter of iOS and of course produced a very cryptic error.

  I used CS5.5 so maybe that this problem has been corrected (if not, I would say making it a compile error), but just thought I would post my findings.

• Error loading lvanlys.dll

  Hi all

  2 days ago my PC starts to send this message: error loading lvanlys.dll. Inavalid access to memory location. I use winidows 7 and LabView 2010.

  To fix that I do every thing and finally I reinstall windows and labview, but nothing change. I need your advice.

  Thank you.

  Ah. Ok. Hey, I have the same machine!

  It's quite extraordinary material and you should probably mention that.

  There is a bug in the old intel MKL library of known on machines with many cores. Are you really sure it worked before on this same machine with the same version of LabVIEW?

  You should probably update LabVIEW to make it work correctly with 32 virtual cores. This is an old discussion.

  See also my report here. If you disable hyperthreading in the bios, things should work. Would be - that you had it disabled before?

• Equium A60 won't start - error message: Load needed DLLs for kernel

  The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
  Re-install? I made this countless times.

  Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

  Any suggestions on how to deal with this problem will be greatly appreciated.
  Blessings on you.

  Hello

  Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!