Why my C: drive using 73 GB?

Similar Questions

• Why am I 162 of these "Cache0000000162.dat" files in my photography afer drive using Photoshop?

  Why am I 162 of these "Cache0000000162.dat" files in my photography afer drive using Photoshop? I was getting support Adode help yesterday, but we were not all at the same time.

  He has help with a serious issue upgrade to the latest version of Photoshop CC (2015).

  I was getting the same before the upgrade, but not as much .dat files.

  Gary

  Hi Gary,.

  Please follow the location and check it below if you have configured in the settings cache files.

  > Launch Photoshop

  > Come on in Edition > Preferences > Camera Raw

  > Check the location of the camera Raw Cache

  ~ UL

• Why can I not use mobile link in drive on window Vista?

  Why can I not use mobile link in drive on window Vista?

  Mobile link is not supported in products 10.x. download version 11.

• Why can't I do a search in my external hard drive using Adobe Bridge CS6?

  When I open Adobe Bridge CS6 and try doing a search within my external hard drive, it will give my internal hardisk results only? This is the 1st time that I encounterd this strange issue. For this reason, I do my research with windows and then browse each result with bridge! which is really annoying.

  I solved the problem go on the search field and clicking the search icon where he will give a drop-down list of the 3 options, and then selecting bridge search: current folder and that solved my problem. Thanks for all help

  Date: Wednesday, August 14, 2013 06:45:55-0700

  From: [email protected]

  To: [email protected]

  Topic: Why I can't do a search in my external hard drive using Adobe Bridge CS6?

  Re: Why I can not do a search in my external hard drive using Adobe Bridge CS6?

  created by Curt Y in the General Discussion of bridge - see complete discussion

  You can search for an external drive if the operating system permissions are OK.  Bridge, however, will not look on different drives.

  Please note that the Forums Adobe does not accept attachments to emails. If you want to embed an image on the screen in your message please visit the thread in the forum to incorporate the image into the http://forums.adobe.com/message/5593774#5593774

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/5593774#5593774

  To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/5593774#5593774. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in the General Discussion of bridge by e-mail or at the Adobe community

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.

• Why my computer they used a lot of hard drive space?

  My windows 7 Home premium x 64 had about 800 GB of space left har disk. And now, there are only about 500 GB left. Please advise me on this problem before my computer uses all my hard drive space.

  Moved from devices on Windows 7 and drivers Forum.

  Hello

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• Restore the data in the external drive using Time Machine

  Hi y ' All!

  I store my photos in my external hard drive because there is not enough space in memory is internal. This is actually my second drive external hard than my first (Adata HE720) is not the beginning of last year. Unfortunately, my WD Elements has stopped working and I can't restore data using Time Machine, as the drive is not found in Time Machine under devices, and I'm sure that I restored my photo library and many other files from my old external drive using Time Machine.

  Can someone tell me how to recover my old files? I have many other important data here including my photos and I don't want to lose them. I'm fairly positive that Time Machine allows me to get the data as is the point of it.

  Thank you in advance!

  P.S. If you guys have any recommendation on a reliable external drive, please do tell me!

  Hey guys, I found the problem.

  It turns out that I'm never giving time Machine to deselect my external drive to backup; Therefore, there is absolutely no copy done during execution Time machine. I really don't understand why Apple made this the default behavior, but it is what it is.

  So, people, don't forget to go to Time Machine preferences and make sure that you remove the external hard drive that you want to backup under options. Once you do, you can enter the time Machine and your drive will appear under devices.

  See you soon.

• Designjet z2100 predefined paper sync to the driver using the HP utility is greyed out.

  Hi all

  I have a z2100 24 "on the latest firmware v9.0.0.5 (November 2012) and the latest drivers installed on Win7 64 bit OS. Last UTILITY.

  I downloaded a Preset paper HP (HP Everyday matte adhesive polypropylene) from the HP website and downloaded the document preset to the printer. The predefined paper displays on the front panel of the printer under custom paper types. If it worked.

  To synchronize the document for my permit profiles now, I need to use the HP utility, but PROFILES PAPER SYNC icon is grayed out. Therefore, the paper type is not available in my driver. That's my problem.

  Any ideas why I can't sync the downloaded document preset on the driver using the HP utility?

  Thank you very much

  Charl.

  This forum focuses on the level of consumer products.  For the Designjet you can have better results, post in the forum HP Designjet here.

• Why can I not use ready boost with flash player in my home premiun wvista?

  Why can I not use ready boost with flash player in my home premiun wvista?

  Hello

  This Flash drive is probably too slow for configure ReadyBoost.

  Here is some information that should help you:

  ReadyBoost
  http://www.vista4beginners.com/ReadyBoost

  What is ReadyBoost
  http://www.winvistatips.com/ReadyBoost-T25.html
  Explore the features: Windows ReadyBoost
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READYBOOST
  LOAN - many are lying or stretching at least the truth. Look at the sides of the player below
  and buy one you know is FAST.
  
  Don't forget that the readyboost max cache is 4 GB Vista and 256 GB Windows 7. If your device
  is more than you can use it for storage. And you need a fast reader.

  ReadyBoost - list of speed Flash memory
  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  How to find the index of ReadyBoost speed
  http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/

  Speed tests USB Flash Drive - any size car - link to the utility USBDeview
  http://usbspeed.NirSoft.NET/

  Publish a speed test of your USB - also a link to the utility USBDeview flash drive
  http://usbspeed.NirSoft.NET/publish_usb_flash_drive_speed.html

  http://www.grantgibson.co.uk/misc/ReadyBoost/?make=SanDisk

  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server?

  I am running Windows 7 Pro 64-bit in a dish netwrok with no announcement. I can map drives on the server without any problems and everything seems fine. Then after a few hours it seems to lose the mapping on the drive. There are two mapping drives and he loses a. It will show in my computer as being mapped, but you cannot access it. You can connect to the mapped drive on bringing the command run and typing in the UNC path in.

  The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server? Once you tell to remap things in car are fine for a few hours.

  My question is where and why it does this?

  Thoughts?

  Thank you

  Tom

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Hope this information is useful.

• Why my wecam enable used

  Why my wecam enable used

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why two local drives appear on my PC if I have one?

  Why two local drives appear on my PC if I have one?

  It seems to be the partition of 100 MB of the system default, but she appears on 'My PC' or 'computer '...
  I leave it there or what should I do?
  Thanks to all for the replies! :)

  The 100 MB System Partition is created by Windows 7 during installation and it is usually hidden in almost all cases. What might have happened in your computer, it is that, somehow, a drive letter has been assigned to that partition, and this is why it is displayed in the window of your computer. You can delete the associated with the System Partition drive letter on your computer to make this new hidden partition. You must not remove or make changes within this partition, it will leave your computer in the absence of priming.

  To remove the drive letter of the System Partition:

  1. click on Start, type diskmgmt.msc in the search box and press ENTER to open the disk management window.
  2. right click on the partition system booked about 100 MB of size in question and then click change drive letters or paths.
  Note: Be careful here, do not make any changes to the drive letter assigned to the other partitions in the computer, which would be a disaster.
  3. then in the pop box - next up, Select the drive letter assigned to the partition, and then click Remove.
  4. There will be a couple of guests you say that if you remove the drive letter, some programs that rely on drive letter may stop working, you can safely accept these guests. Once you are done by clicking OK in these pop-ups, close all open windows and restart the computer.

  You shouldn't see that partition in the window of the computer now. It will be useful.

• Why can I not use my ITunes credit to buy a movie on Apple TV?

  Why can I not use my Itunes credit to rent a movie on Apple TV?

  the credit, which I like to use is the same that if I buy an App?

  Apple TV wants to charge my credit card to rent a movie

  You can use the credit to rent a movie on Apple TV. Your card will be charged if the credit is not sufficient to cover the rental

• Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

  I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

  (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

  I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

  While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

  10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

  I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

  I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

  I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

  Can you help me?

  Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

  I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

  If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

  Once your disc is clean, then simply install Win10 on it.

  That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

  Good luck

• Why can I not use three fingers to drag an item on my screen?

  Why can I not use three fingers to drag an item on my screen?

  There is no option in the preferences system - trackpad.

  How can I go back to os x? I am not happy with El Capitan

  Thank you

  See here three-finger drag is gone in my macbook air?

• DV7 - 7333cl: how to extract usable data from a bad drive using 22 pins adapter usb to SATA on the new HD

  Greetings HP Forum,

  Recently, I replaced a bad hard drive on my laptop. I need now step by step procedure to extract usable data from the wrong drive using 22 pins adapter usb to SATA on the new HD.

  NOTE: I can't not all data that especially if some of the software downloaded on the replaced disk can be altered. Should I first download Internet Antivirus to protect my new hard drive? I'm not an expert, or even close to this when you work on the back of the laptop, so I'll have to step by step how to download and to partition the data recoverable and software, etc..

  Thanks in advance for your help... I greatly appreciate it!

  See you soon!

  Wes

  It is not complex. Attach the drive to the adapter and connect it to any other computer with good antivirus and antispyware installed. I use Malwarebytes and Avast. When you connect the adapter with the drive connected to the usb port, the drive will appear and it will be assigned a letter maybe E:\ or F:\ or something else. Immediately, he analyzes with the antivirus and anti-spyware. Quarantine or delete any virus or malware it finds. Then, it's just a matter of navigate the disk and copy and paste the contents of the host computer in a directory for this purpose. Obviously, you can copy from documents word, photos, music files, but you cannot copy the applications like Microsoft Word, iTunes. Photoshop.  You may need to take ownership of the files on the old hard drive, but Windows will guide you through this. Don't know what else I can answer.