Why the site the module does not recognize that I use the browser Firefox Moble?

Similar Questions

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• My laptop does not recognize that anything that is connected to the USB ports

  Help, please. My laptop does not recognize that anything that is connected to the USB ports.

  Moved from feedback

  Original title: problems with USB ports

  Hi Alba.

  1. who is the operating system installed on the computer?

  2. What is the brand and model of the computer?

  This issue may be caused if one of the following situations arises:

  • The currently loaded USB driver has become corrupt or unstable
  • Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
  • Windows may be missing other problems hardware or software updates
  • Your USB controllers may have become corrupt or unstable
  • External drive can enter selective suspend
  • Your PC motherboard may need updated drivers

  I suggest to connect the USB device to a different USB port and check.

  You can run the Fixit provided in the article and the Coachman.

  Reference:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  You can also try the steps in the link and check if it helps:

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply to Windows 7 as well

  Hope this information helps. Response with status so that we can help you.

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Aspire M5 - 481 T-6488 - does not recognize that AC is plugged. Will not charge the battery.

  Aspire M5 - 481 T-6488 - does not recognize that AC is plugged. Will not charge the battery.

  Laptop is about 2 years old.  Running on the Windows 8 origninal accompanying.  Had the same problem when it was purchased.  He sent to Acer.  Returned with no report / Details.  Has worked very well. Until recently.

  Noticed that seeing orange lights up when it feels like load and stops at 35% load.  Load is something dark, don't miss especially.

  Tried:

  Stick a PIN in the "battery reset" hole on the back

  Uninstalling the 'API Microsoft' battery

  Remove the battery to see if it'll work without it (it has an internal battery)

  Of course Acer won't help now since the warranty has expired.

  Please notify.  Thank you.

  Power plug has been checked, flinched 19V.

  Laptop briefly, then lost load capacity.  Checked power once again, 0V.

  Power adapter is bad.

• Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

  Original title: windows media problems
  Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

  If you restart WMP when this problem occurs, which helps?

  It seems that the AutoRun or AutoPlay got disabled on your system. Please try the instructions in the following article to reactivate these:

  http://support.Microsoft.com/kb/330135

• Dynamic CRM2011 for the outlook client does not recognize that I have already installed SP2

  Dynamic CRM2011 for server (vista 64-bit) or the outlook client does not recognize that I have already installed SP2

  Error log (edited to highlight what appears to be the problem):
  Latest Version of the OS: 6.0.6001
  11:14:06 |   Info |   Service Pack: Service Pack 1
  11:14:06 |   Info |   System type: workstation
  11:14:06 |   Info |   Mask away: 0 x 0300
  11:14:06 |  Error | Failed to install Microsoft Dynamics CRM for Outlook. Install Windows Vista Service Pack 2 and then try again.
  11:14:06 |  Error | System requirements not filled to allow the installer to run.
  My computer works SP2 and all current updates except for:
  • Platform Update for Windows Vista x 64-based Systems (KB971644)

  1. error: 8000ffff

  I ran 'fit' the Microsoft tool, but made no difference. This update is my problem, or I am barking the wrong tree?

  Help, please!

  Hi Paul,.

  The question you posted would be better suited in the Forums of Microsoft Dynamics. I would recommend posting your query in the Forums of Microsoft Dynamics.

  http://social.Microsoft.com/forums/en-us/category/Dynamics

• When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have already a CD in the drive, it can not extract the CD.

  When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have a CD in the drive, it already and can not extract the CD. The air play perfectly to the reader.

  Hello, BGNG,.

  This thread has been created in wrong forum; the Microsoft moderation team has moved this thread on the forums of programs .

• I'm trying to set up a N Router and my cd player does not recognize that there is a cd in the drive. Music CD plays without problem

  Computer does not recognize that there is a CD in the drive

  Hello, Bernice Arnold,.

  This thread has been created in the Windows Vista forum install, level and activation; the Microsoft moderation team has moved this thread in forum Windows Vista Hardware and drivers.

• Player does not recognize that the CD or DVD is loaded

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?

  Sounds like the drive has failed.  You can try to clean with a CD/DVD audio standard disk cleanup, but if it fails, then the reader should probably be replaced.

  "RoboTriumph" wrote in the new message: * e-mail address is removed from the privacy... *

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed the Windows updates, my computer does not recognize that there is a disc in the DVD - ROM thing

  I had this problem for weeks and only recently someone told me that it is perhaps for this reason.
  I tried several things to fix, and one of those who created an error where when I clicked on drive E in Windows Explorer, it looks like:

  E:\ application not found

  So, in the end, I wiped my computer and everything on it and rebooted again.

  IT TOOK FOUR HOURS.

  So, I've set up the computer as I did when I got it 2 years ago, and everything was fine. I could insert a disc, it reads that and I was able to install my game, no problems.

  Now, I have reset everything up, and there are more than 2000 updates to update installed. So I did.

  SO NOW, after all this, which took another TWO HOURS - he does not all disks again.

  I play the Sims 3 - fiercely - and so I tried to re - install all my expansion packs, but it does not now.

  I DON'T want to make that whole process again and install all my games before updating Windows, because I believe, even if I did that, once I've updated, I can't play the game, because my laptop does not recognize that the game disc is there.

  Help, please.

  I spent so much money on these games, and I love them! I don't have the money to buy a new computer.

  I have a Lenovo Ideapad

  Core i5 Intel

  https://support.Microsoft.com/en-AU/KB/314060/en-us

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Windows-8-DVD-RW-application-not-found/d68931e4-82f1-4D04-830d-49478ead5dd8

  Your AutoPlay doesn't work maybe not properly.

• Adobe does not recognize that I uninstalled CS on the old computer, will not let me turn on the new computer

  Adobe does not recognize that I uninstalled CS on my old computer, will not let me activate it on the new computer.

  Yes, uninstall is not the same as disabling. Call support to reset the activations.

  Mylenium

• Why my audio midi Setup does not recognize my external midi devices?

  Why my audio midi Setup does not recognize my external midi devices? The midi interface and all midi devices are connected.

  P.S. The icons and the midi interface are all "grayed out" in the midi studio window when I click or double click on it nothing happens.