Why virtual machine say not 'connected' even when I'm running HA?

Similar Questions

• Anchor points will not connect even when "intersection".

  Hey guys

  So my question is, for example, I have 2 lines with an anchor at each end. When I drag on the anchor line anchor the other end line in order to connect them I see green lines, saying that they cross so I line and release the mouse button. The line that I drag then moves to the side, and they're more connected. When I see in the outline I see that the lines are not connected. I try dropping them on in map mode, same problem. It is the same for all the anchor points, including on forms except those drawn with the pen tool.

  I've been job id document and it was working fine until just recently, then it stopped working and I had the problem that I pointed out above. When I open a new document, it works fine. When I copy my designs in a new document, all lines that came from the old document still have this problem but all the new lines or shapes I create join perfectly. I want to continue to work on this document that I have spent a lot of time on it to this day though I need points to align and connect when I join them.

  Any ideas?

  Thanks in advance

  chapachap,

  In such cases, the first assumption is aligned to the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

  In addition, if you want to join them in a path, you must select them and Ctrl / Cmd + J (with an apology for possibly stating the obvious (too) you already know).

• 64-bit virtual machines will not work on the new computer running 64-bit Windows 8

  
  My new computer running 64-bit Windows 8. I installed WorkStation version 9 and the virtual machines have 64-bit operating systems will not work.

  have you turned on VT in the host system BIOS?

• I can't send or receive e-mail messages on my email account. When I open my mail it says not connected.

  Hello

  I was connected to facebook yesterday in my windows live mail account. NOW, I can NOT SEND OR RECEIVE e-mail MESSAGES ON MY ACOUNT: * e-mail address is removed from the privacy *. The prompt says not connected.  What will I do?  Please help me.  Thank you very much. The last time that I had a problem, your forum helped me fixed.   Thank you very much for your help.

  This is the second time I asked for your help.  Looking forward to hearing from you soon.

  Nelly

  Hello

  The question you have posted is related to Windows Live Mail and would be better suited to the Windows Live community. Please visit the below mentioned link to find a community that will offer in support of your request:

  http://windowslivehelp.com/product.aspx?ProductID=15

• Virtual machine does not respond on esxi 5.0 using Vsphere 5 customer

  Hello

  One of my virtual machine does not respond when I am trying to connect through the console on my vsphere client. I use esxi 5.0.

  The thing is that I have several virtual machine works very well and I do not understand why it doesn't work anymore.

  When I try to restart the vSphere client, nothing happen or when I try to stop it.

  Does anyone have an idea of what I need to do?

  Welcome to this community!

  in some special cases the virtual machines enter State does not. In this case, we have to kill the VM process to bring the virtual machine online.

  the following KB explains different methods to do the same thing.

  http://KB.VMware.com/kb/1014165

  Follow the steps under "using the ESXi 5.0 esxcli command to turn off a virtual machine.

  I would recommend contact VMware support, given that the steps above are a little off destructive.

• 8610 says not connected printer

  Hi, just bought the 8610 wireless printer and it's my first hp ever.  Set up was super easy, but now when I try to print wireless from my MacBook Pro, it says not connected printer.  I printed the start fast and even guide reconnected the printer to the network. Also, I restarted my computer and the printer, but it does not my laptop print and takes the "work" in the queue.  I see my work when I click on the icon of the printer on the bottom of my computer but nothing.  I went through the steps you guys have listed on the forum and tried to "open the queue of the printer" and nothing.  I currently am able to print from my iPhone and iPad so I know it works on this end.  Help, please!

  Hi hani2424,

  I'm glad your problem is solved!

  Think about scoring the answer that solved your problem like "Accept as Solution" so that others may not print can see how they can too.

  Best regards.

• I can go to the internet and all, but on the icon say "NOT CONNECTED" and I tried to connect to the network for 2 weeks already... its still not not workin... Please help!

  I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
  and I also try to fix or diagnose, but its still not not workin...
  Please help idk what 2 do more...

  Hello

  Good luck, you need technical support for a real computer store or system manufacturer is supported.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can download these on another
  computer if you need to and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Can't export virtual machines: unable to connect to the remote server

  Hello

  I'm working on vSphere client 5.1 (vCenter Server 5.1). Trying to export a virtual machine for distribution model. When I go to file-> export the template OVF..., I get the following error message:

  Can't export virtual machines: unable to connect to the remote server

  Remote not sure what/who he is not able to connect to. If I connect vSphere Web Client and navigate to the same model (or all other models), under 'All the Actions of vCenter' I don't have an option to export to the model of the FVO. But if I use a VM machine instead of a virtual machine template, I have the ability to export to the OVF, but it is grayed out.

  Am I missing any customer authorization or plugin for vShpere?

  Discovered that vSphere server had some modifications made by HIM to resolve the violation POODLE. HE had to set the ip address of the machine where export OVF will be performed. Which allowed the connection to establish vsphere client and perform an export of the FVO.

• Virtual machine does not start the Server Windows 2003 Std ISO file?

  Hello

  I am trying to create a virtual Windows 2003 machine, I created the ISO file, downloaded on my ISO library and connected the CDROM drive for the ISO file.

  When I boot the maching, I select the start menu and select the CDROM drive the virtual machine starts the ISO?

  The continuous boot just on the network card boot.

  It's as if the virtual machine does not see the CDROM drive?

  I use folder2iso

  To me, it sounds as if the ISO created may not be bootable! How did you create the ISO file?

  André

• Windows live mail says 'not connected' [in the internet]?

  I have two ongoing problems.  Don't know if they are connected to each other.  I have Windows XP SP3.

  1. in Windows Live Mail, I constantly get a message when the sync (download or download messages) saying "not connected".  Usually, I have to reboot to clear and be able to download my messages pop.  Sometimes to leave Windows Live Mail and reopening help.

  2. my wireless printer loses its connection (says "no communication") and does not print my document unless I turn it on and turn it back on to reset it or unplug my wireless modem to reset...

  I thought that my wireless Belkin N Series modem may be defective, but it still happens with the new D-Link DIR 615.

  Everyone knows about this problem?  Would be grateful for advice on how to fix this problem.  Thank you.

  I also have the same problem on browsers more 8 and I've also posted this as a question!

  I got answers to solve my problem of here -can not access certain websites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  Windows Live Solution Center

  http://www.windowslivehelp.com/

  But none of them solved my problem, but you see and check if it works for you.
  How I used to get rid of it?
  I used to remove history and restart my computer, and then most of the time it would solve my problem.
  Now I regularly clean my internet traces and history using the software and it is not now.
  To download these types of software research it on google! It could be that useful...

• 4680 says not connected to 10.9 Mac

  Been using my 4680 for 5 years - disconnected from the Mac 10.9 temporarily to use on the HP laptop - now reconnected, but says not connected when I try to use it

  Hi @crofter

  Looks like do you a message in offline mode of the printer, or perhaps simply the symptoms of such a message.

  Please use the following document to solve the problem; "Printer is off-line" Message appears on the computer and the printer does not print: Mac OS X

  I hope this helps.

• Virtual machine does not start

  Hello, I had a VM VirtualBox but VB don't sharing not the graphics so I was told to use the workstation. I tried from news on workstation Virtual Machines, but also to transfer to the other virtual machine, but it sits right on the screen for hours. I have a pretty crappy laptop so I understand the Virtual Machines may not work correctly, but this would make won't start do not at all?

  

  When I try to get out, it gives me this error message.

  Please try * .vm (including the asterisks).

  André

• Virtual machines do not get IP address from the DHCP server

  Hello! I just spend Xenserver to ESXi. Created a couple of virtual machines and none of them gets an IP address from our DHCP server (DHCP server is a physical PC), and instead, they get a number of internal 192.168.x.y allowing connection to the internet.

  Looks like a way to do this is to install a virtual machine that is a router, as M0n0wall, and route traffic to connect to the external network and finally to access internet. But this is not what I have to do.

  I need to have virtual machines that are server to get an IP reserved for our DHCP server, and then our local windows client should be able to access it directly.

  I searched on google and forums for this but I can't seem to find how to configure virtual machines to directly belong to our local network.

  I thought that VMware would have a simpler way to do so than XenServer, but I was stuck on this one day now and really frustrated as I get not before with this project, stuck on this little problem... sigh...

  Thanks for your help.

  GER.

  ESXi does not IP addresses to the virtual machines it host - if the virtual machines are not able to access your physical network than that of the thw two virtual machines acts as a DHCP server - now to the question of network - if you are not able to reach the virtual machines on the physical network or achieve fitness network virtual machines , then there is a problem with the physical connection to the ESXi host, possibly the configuration of the physical port that connects to the - is a way to test this theory to assign an IP address on the same network that the management port - if you are able to access the virtual machine, then you know that the problem is with the switch port.

• VSphere 5.1: Virtual Machine does not share host RAM

  Hello

  I use a 5.1 Vsphere license (Vsphere 4 update)

  I am facing a problem after the upgrade, virtual machines do not RAM

  As if I have two machine with 2 GB of RAM in total then use of the RAM on the HOST becomes 4 GB but really active memory usage is about 1 GB only.

  It wasn't a problem in Vsphere 4 it shows an active memory as the HOST memory usage but in Vsphere 5 Virtual machine share not RAM and book full RAM when turned on.

  Maybe there's some settings to enable sharing of memory or to disable this full booking of RAM.

  Hello

  The changes are the VMkernel is using large pages to back up virtual memory pages.

  For more information, this article by Duncan will provide enough information and links to other articles on this topic:

  http://www.yellow-bricks.com/2011/01/26/re-large-pages-gabvirtualworld-frankdenneman-forbesguthrie/

  In short VMkernel will place pages issued by the VM in large pages on the physical memory to speed up the memory access. Large pages are used when the physical CPU that has functions EPT (Intel) or IVR (AMD).

• With instant full VM LUN and now the virtual machine will not start or register

  Hello

  I have a case here, where we have a virtual machine that quickly filled the logic unit number and the snapshot is currently 110 GB. It is now available on the new LUN space, but the VM does not start and he was also addressed as 'unknown' in the viclient. I tried to cancel the registration and check-in again, but he refuses to register. It seems that the snapshot is damaged.

  When you try to save it, I get the following in hostd.log:

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': (17) successfully opened size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': open with success (21) size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  Referred to as registry: AXAPTA/AXAPTA.vmx

  Vmsvc indicates file is loaded, by: /vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA.vmx

  I also tried to copy virtual machines directory down to a local PC and run via VMware Converter, but I get the message "the source VMware Consolidated Backup"filename.vmx"has a missing catalog file.

  1. VMware - v

  VMware ESX Server 3.5.0 build-130756

  Any help is appreciated.

  Lars

  The problem (according to the newspaper) is AXAPTA_1-000001 - delta.vmdk no AXAPTA_1-000002 - delta.vmdk (the error on the second snapshot is probably because of the broken parent snapshot).

  The descriptors are ok, which means that the VMDK itself is broken.

  If you do not have a backup, you can try the following:

  -Copy the files in another data store

  -change the second snapshot descriptor to point to the basedisk as the parent

  -Try and mount the drive

  -If you're lucky, you should be able to recover at least some data of

  -If the disklib is complaining again then the two snapshots are broken - which is unlikely

  Depending on how old the second snapshot (the older one is better it is) the method above will not help.