Why will recogize Xp no my new hard drive of 1 Trabit

Similar Questions

• CS3 will not activate on the new hard drive after the failure of an old man.

  I had a hard drive fail on my Mac and got a new. The operating system before and after were OS 10.10 (Yosemite). I reinstalled CS3 and entered my serial number. It does not accept as a correct serial number. I sent support of Adobe. They said: Yes, it is the correct serial number. I asked what I could do, they said "Try the Forums." So here I am.

  The problem is probably that CS3 is not really supported in Yosemite.

  What others have experienced, is that If CS3 is already on the computer, you can continue to function, even if you have updated to Yosemite. But many have had problems installing CS3.

  Because CS3 is old and is not officially supported you unfortunately are on your own.

• Equium A100 - will be the responsibility of recovery on a new HARD drive disk

  Hello

  Don t know if anyone can help, I am just out of warranty by a month and I think that my hard drive has failed, or I had a virus that has hit loads of files and the PC is always eager to run the disc scan and still get errors on commissioning, sometimes start even goes just right to start mode then crash again and again the same thing.

  I have the recovery disk, but this is not sort on the question, so if I get a new hard drive the recovery disc will actually load on a new HARD drive? Why don t Toshiba just give us the full operating system to start with?

  Someone has answers or similar questions that could help please let me know.

  Concerning
  Dean

  Of course, you can use a recovery with new HARD drive media. No problem at all! Swap the HARD drive and install the operating system using recovery DVDs. All that s!

• I have to buy a new hard drive for vacuum. a recovery disk will replace my windows vista?

  my hard drive went out on me completely. reads as 0 bytes. lost everything on it. a system recovery will work on a cool new hard drive?

  Yes, the recovery disks installing Vista and original software/drivers on a new hard drive. Just be sure to get a hard drive at least as large as the original capacity. It may be big, but not small ability more. I wouldn't go with one of the new large capacity hdd format advanced however.

• recovery after installing new hard drive

  The recovery disc will reset windows on a new hard drive with the key at the back of the pc

  Yes.

• How can I reinstall the operating system on a new hard drive?

  I strongly suspect failure of hard drive on my old computer XPS 420. Data recovery isn't a problem. However, because the way I too lazy to buy a whole new operating system, is possible that I can transfer the installation of Windows Vista on a new hard drive? I told me that Dell will send me an installation disc to do, but how to make a record like this, and is there another way?

  I'm thinking of ghosting the HDD on another and the use of the recovery for nuke partition in a new facility, but it would even work?

  Thank you

  SnarfTCat

  The simplest method, I prefer to install a replacement hard drive, is to clone the existing hard drive to the new, that will also transfer all applications and programs.

  You need an imaging utility, similar to True Image Home 2015.

  http://www.Acronis.com/homecomputing/products/TrueImage

  Acronis resize partitions transferred to match the size of the new hard drive.

  Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.
  
  First, install the new drive as the secondary and the image of the main hard drive in it.

  Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

  Start the system with only the new hard drive connected.

  Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

  Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

  It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

  What is obtaining a disc from the Dell operating system Vista OEM [If Dell still copies of this available media], but you can be out of luck unless you have a warranty from Dell, but it's worth a try to see what is happening.

  If you reside in the United States, or the Canada and are the registered owner of the computer, with an active warranty, a disk that contains the operating system specific to your system factory installed can be requested HERE.

  Note: Dell may impose a charge for the disc.

  If you do not live in the United States, contact the Support from Dell, which is located in your country.

  Bev.

• Very sick hard drive in, how to re - install CS6 on a new hard drive?

  Hello everyone, (and sorry for my bad English: I'm a woman in french)

  In fact, I have two problems:

  I bought a CS6 on December 2013 20; On me I was allowed to activate CS6 on two computers. I only put in a computer, but the hard drive of this computer is very sick today. I raised probabily will have to put a new hard drive in there. How can I transfer my first release of the first hard drive to the second?

  The second thing I wanted to ask you is this:

  We now have one of our girls who studies of design, and we want to give our second opportunity to activation, but the school wants CS6 is on a Mac. We have not bought the MAC yet, because we want to know: is it possible to exchange our able to activate PC against a possibility of activating MAC?

  Someone that could help us to all these things, is there somewhere? Is there somewhere a phone number where we can be knowledgeable?

  Even thank you in advance!

  Yes. You can disable the license from one computer and then activate on another.

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Why my Windows XP won/t find my new hard drive (bit 1 TR)

  I "ve installed a new hard drive (!)" TR cock) but Windows XP will not see it. Why not??

  Try this:

  Click Start, right-click my computer, click on manage (this will open Computer Management), go to disk management

  see if the disc is there, if that is the case, right click and select format.  Keep the NTFS, make sure that the quick format is checked, and then click format.  It is then shaped and should be visible in my computer.

• Re: Satellite Pro A300 - recovery disk will reinstall Windows OS on the new HARD drive

  Hard drive of my Satellite Pro A300 failed. It has now been replaced. I ordered a recovery disk.
  This will allow me to reinstall Windows Vista OS that is installed initially?

  Also, I get this message "BOOTMGR MISSING". The recovery disc will fix this problem too?
  Thanks in advance!

  > I ordered a recovery disk. This will allow me to reinstall Windows Vista OS that is installed initially?
  Yes. Without a doubt.

  New HARD drive is recognized correctly in the BIOS settings?
  If so avoid any problem.

  Moreover, A300 works perfectly and much better with Win7 32 bit.

• Will be produced recovery disk works with new HARD drive?

  Hi guys,.

  HARD drive failed the other day so replacement is on the right track.

  Always the product recovery disc, it will work on the new hard drive or is mapped to the old cd?

  Thanks in advance!

  Hello

  Of course, the recovery disc will work with the new HARD drive.
  It s not severe as a new HARD drive. The recovery disk it reformatted at first and install the operating system, drivers and tools

  Simply said, you will get the same software as on the first day of purchase.

  See you soon

• recovery disc will work with the new hard drive

  I have a HP Pavilion dm4. My hard drive died so I installed a new hard drive. The original operating system installed on the computer is Windows 7. I don't have a Windows 7 disc with the computer. If I order the Windows 7 HP recovery disk, it will install Windows 7 on my new hard drive? I got the info from COA. Thanks for any help you can provide.

  If the new hard drive is having even or a larger size than the old, recovery disks will reinstall the factory OS on your new drive.
  
  Thank you

• Can't reinstall XP service pack 3 on the new hard drive, will not cross of EULA

  Computer VOstro 220 (Dell) under the age of 18 months. Internal HD died and was replaced two weeks ago with a HD internal 320, the speed of 7200 Western Digital. (Micro Center, a computer store large installed the HD that I bought at the store)

  I used the OEM "reinstall Windows XP service Pack 3" DVD.  With F12 I put the computer to boot from the DVD.

  DVD boots, I chose the option to install the OS

  Fisrt I see the message that the program checks the material. No error message

  Then I see the screen with the words "Windows Setup". Five minutes later, Microsoft EULA (end-user contract) is displayed.  IT does not scroll, I used the arrow keys on the keyboard to get at the end of the EULA was waiting for some kind of "type option"I agree". But there is nothing.

  Nothing more happens. No additional configuration.

  What is the problem? What should I do to get the Windows XP installation to continue?

  Why not install the operating system?

  Anywhere between 5 and 20% (depending on the production) new hard disks are defective. Test your drive with the factory utility.

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
  and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• The new hard drive will interfere with user passwords?

  I replaced my hard drive on my Dell Inspiron (Windows Vista Home Basics).  The new drive will interfere with my user passwords?

  Mona

  Hello

  You do not say what user passwords you talk, after replacing the hard drive which will be then require you to reinstall the operating system

  If you refer to the online user passwords (Facebook, Twitter, etc.), they will remain the same.

  If you are referring to your Vista account permissions to access, with a new hard drive and you reinstall the operating system, you will need to put in place all the user accounts and passwords user again for them.

  See you soon.

• I installed a new hard drive on my computer and re-loaded windows vista. Will not be installing SP1

  I installed a new hard drive and re installed windows vista. I can't install SP1 because it is not supported anymore. Can I install SP2?

  1. Learn how to install Windows Vista Service Pack 1 (SP1)
     http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx
  2. Learn how to install Windows Vista Service Pack 2 (SP2)
     http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Manually install the SP1 and SP2 then.

  The links above will advise you where to get the standalone etc versions.