WIFI stopped detecting networks

Similar Questions

• Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

  Hi guys,.
  Since a few days my wifi stopped working.
  If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

  

  And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
  
  
  
  If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
  
  
  
  My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
  Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
  
  I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
  I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
  
  I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
  
  HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

  This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
  
  I tried different settings too:
  I changed the channel, I put 802.11 g on my router, APSD off on the router.
  I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
  
  The hardware test detects any failure.
  
  Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
  In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
  
  The only way I have is USB tethering with my Nexus 5.
  
  Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
  
  -------------------------------------------------------------------------------------

  What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

  WAWood,
  I took a risk.
  I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
  I had to switch from Win8.1 to 10, but the Wifi problem is solved!
  
  I'm still guessing that was the problem...

  Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
  
  In the next few days I'm checking the linux problem (reset deleted primary partition).

• my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  Hello

  1 have you made changes to your computer recently?

  2 are you able to access the Internet through an Ethernet cable?

  I suggest you to follow the steps in the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• WiFi stop working on my Inspiron 1525 after installing Windows updates

  Updates of Windows installed a few days and wifi, stop working. I uninstalled the windows updates since that day, updated the WLAN driver and even updated my BIOS, and nothing seems to solve the problem. He says I'm on local access only, but when I connect to a modem, I have still no internet to diagnose problems. Any help would be great!

  If possible, try to connect to a different wireless network and see if you continue to have the problem.  If you have other systems that connect to your network that aren't problems check everything their network settings and make sure that there are no differences on your system.

  Try the safe mode with networking, (hold the SHIFT key down while clicking on restart and then choose Safe mode with network) once in failure of Windows to see if you can connect.

  Check power settings, simultaneously press the windows key and x and select Device Manager, look for the wireless card and double click it, choose the power management tab and delete control "allow the computer to turn off this device to save power" and then try to connect.

  Change the power plan to high performance, press the Windows key and the X set button again and choose power options, power management has chosen and select high-performance, plug in the AC adapter and the wireless card test.

  Please reply back with the results and if you can what Windows updates has been downloaded.

  TB

• My ID 6 Iphone and touch stopped detecting my finger

  My ID 6 Iphone and touch stopped detecting my finger about a month before, as when I try to add a fingerprint, it does not detect it. It is up to date, and it is clean and dry. I know want to know if I can fix it at home, or if I should take it.

  I'm having a similar problem on an iPhone 6. All of a sudden a few days ago it stopped detecting my fingerprints and wouldn't let me put new ones in. Then last night my home button doesn't work most of the time, it might work on 50 clicks 1. I thought it was a hardware problem but I don't see a number of people with similar problems. I'll try to bring the phone to an apple store tonight to see what they say.

  iPhone 6, iOS 9.2.1

• WiFi stopped working

  We're both 73 years old so not savvy with laptops, etc.

  our wifi stopped working, but he works hard cable

  does anyone know what has happened and how we can fix it, please

  Hi Joyce,

  Let me see if I can help you through this...

  The problem lies in the configuration 'power options' in the 'control panel' as some changes simple to do to correct the problem.

  I have written instructions as well as provided photos of each step - please see the pictures for a better understanding.

  Good,

  1. click on the 'Control Panel' then icon in the Control Panel window opens.

  2. at the top right of the search window "" view by: category " you will see a small arrow pointing down next to the word 'Category' - click with your mouse as 2 more options will appear in a menu drop-down."

  https://drive.Google.com/file/d/0B5B...JTQXNEMUk/view

  3. click on the option "large icons" you will then see a lot more features in the control panel are displayed.

  https://drive.Google.com/file/d/0B5B...ZGSVB0Zm8/view

  4. scroll the words 'Power Options' and click on it that a new window will open.

  https://drive.Google.com/file/d/0B5B...pTTmZBTXM/view

  5. you will see 2 options here - if not click the drop down arrow in the center of the page to reveal the words - 'Balanced' & 'High Performance '.

  https://drive.Google.com/file/d/0B5B...dpVzVHT0U/view

  You should see a small circle checked next to the word "Balanced" - you need to change this setting by clicking on the 'High Performance' next option to fix the wifi issue.

  Once you have completed these steps: close the window and test your wifi to see if that fixes the problem - if it isn't trying to "Reboot" or "Restart" your laptop and retest the wifi.

  Joyce, please report it here in case of problems you may encounter and need assistance.
  Also please report back here if this corrects the problem of wifi.

  Aloha,

  DBOBA

• Re: Satellite L350-170 - WiFi stops and starts

  Hello

  I have the Toshiba Satellite L350-170 and it's great. I am running Vista 32 bit and I got it for Christmas ' 08.

  For a while now, just WiFi stop (if I use the webcam on msn or something) as if it is just overloaded, then I had to wait a few minutes before it turns back again!

  Is there a driver to stay connected to the internet? In my taskbar, it is said that I am always connected, and when I check on ConfigFree (when I can't use the internet, but it says I * am * logged.)

  This can be solved?
  I hope you can help!

  Kind regards
  James K

  Hi James,

  Maybe this problem is caused by the router. You should check the log of it. The router is always connected interruptions?
  In this case an update would be desirable and let the ISP, check your Internet connection.

  In addition, you can try updating the driver WLAN. The latest version is available for download on the Toshiba site.

• computer stopped detecting external hard drive

  My computer stopped detecting the new MyBook Essential external hard drive. Getting into Device Manager and says device working properly, but I can't open it or all files - scared because it has all my photos, downloads, music... everything!  Just deleted all old hard drive: 0 (((s'il vous plaît quelqu'un peut_il aider?)) Someone suggested updating the driver software, but I was worried that this would affect all files on the drive: 0 (thank you in advance... x

  Hello

  1. are you aware of any changes made to the computer, before the show?

  2. is there any error message when accessing external hard drive?

  Try to use the same drive on another computer and check if it helps

  Method 1: See the articles proposed for updating the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Method 2: Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3: Reinstall the drivers for the external hard drive.

  (a) connect the external hard drive.

  (b) completely shut down the computer and unplug at the wall.

  (c) wait a minute before coming back plug it in and start the computer normally.

  (d) once you get to the office check if you are able to access the hard disk.

  If the above method fails, try to install the drivers on the hard drive manufacturer's website

  http://support.wdc.com/product/download.asp?wdc_lang=en

  Method 4: Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running check disk on the hard drive if bad sectors are found on the disk hard when Check Disk try to repair this area if all available on which data can be lost.

• Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

  SYSTEM & HARDWARE INFO:
   
  Wireless adapter: USB54GC v3
  Router: Netgear WNR834B (with latest firmware)
  Router config: Auto Channel, up to 130mbps mode, radio enabled, enabled SSID broadcast
  Router Config2: Frag Ahmed - 2346, beat the CTS/RTS - 234, long preamble, MTU - 1500
  Wireless security: WPA - PSK + WPA2 - PSK
  Internet: ISP Modem, Auto-IP, DNS Auto, no connection cable

  Operating system: Windows XP Pro SP3 (latest updates as of 17/01/2010)
  Drivers: Latest from Linksys site (v4.9.90 setup.exe download)
  Programs of security software: Comodo & Panda Cloud Antivirus Firewall
  Configs of security software: uninstalled, installed or disabled, and installed/enabled

  DETAILS OF THE PROBLEMS:

  No wireless network is detected on the computer with the installed adapter WUSB54GC.  Cell phones, printer (located in the same office) and game console, receive positive signals / have no connectivity problem.  With a new installation of Windows (i.e. the BONES cost installation before using each method) I tried to install the unit using the following methods: 1) using the Setup program on the CD-ROM included, 2) using the last program (drivers) site Web of Linksys, install 3) manually through the device with drivers from the Disk Manager and installing 4) manually through the Device Manager with the newer drivers from the Web site Linksys.  In addition, I tried with the firewall disabled/uninstalled software.

  I had some success using the Linksys Wireless Manager program that is included in the installation program.  However, it is only if I choose the option 'connect to the hidden network' when the Wireless Manager is ran in the last step of the Installer (no network is detected the case).  The quirks are that the network is not hidden, and after Setup is complete, I can see all the wireless LANs with the Linksys Wireless Manager (no need to check the option hidden network).  After a few diagnostic tests, I think that the Network Magic software that is installed in quiet mode with the Linksys software is at the origin of the problem.

  During the detailed above method that allowed me to connect to the network, I used the firewall software to observe that connectivity can be established only if nmsrvc.exe, a component of the network Network Magic/pure software platform that is installed silently, is allowed access to the network.  After this program to access the Linksys Wireless Manager network can detect networks normally and connectivity problems disappeared.  After he logged initially I can even kill the process, its assistance process and the program manager wireless, still maintain connectivity.  I also thought about this magic (AKA pure networks platform service) network installation two other network protocols that when disabled preventing connectivity.  With certainty the adapter only works if I finish the complete installation program by using the hidden network option and continue to use linksys wireless/network magic software later.

  I'm trying to understand why the Network Magic software is necessary to detect and use all networks.  As I said originally, I tried just to install the drivers through the device without success Manager.  The adapter is configured on a machine Pentium 4 of 2001, and this software supports 40 MB of precious CPU cycles and memory.  I want to connect to my wireless network and use the computer without software bloated slow down the computer even more.  My own conclusion, after all these tests are that my router needs the network magic to work properly for some reason, but if that's true, I would at least use Windows connects to the network as Linksys Wireless Manager uses 30MB RAM itself.  Of course, it's more a problem advanced if I appreciate anyone who takes the time to read all this and make their contribution.  Thank you.

  I think that the most appropriate statement would be that the WUSB54GC has some compatibility issues with Windows XP SP3.

  Specifying the age of the available Linksys drivers I did some research and discovered that the WUSB54GCv3 uses a third party (a common practice), the Ralink RT2800UD chipset.  Latest Ralink drivers for this chipset are over a year newer than the official drivers from Linksys.  They require just a few reconfiguration so that they work with Linksys WUSB54GCv3.  With the updated drivers comes better compatibility and performance often.

  Once I installed these drivers updated the device could detect local wireless normally, and I was able to use the Zero Windows wireless utility to connect to my network.  I think that others with similar compatibility problems will have the same result.  For more information and links to these pilots updated already visit reconfigured: http://sites.google.com/site/linksysupdateddrivers/.  There are not official, updated drivers for many other Linksys products here.  Credit for the drivers and the Web site goes to this person: http://sites.google.com/site/linksysupdateddrivers/about.

• BlackBerry Smartphones, wifi and mobile network Q

  If I turn on my wifi at home & sign in, & at the same time, let Mobile network on... fresh data which of them will be run out of?  The Mobile network will win or share or just use wifi?

  Also I was wondering because I wonder if light work wifi when I'm at work, save my data & pass their lol

  TIA!

  Hello

  In general, BBs "prefer" WiFi network of business for services BIS data. You can always check inside the connection management > State of Services, which BIS route is average.

  But you should also check inside the apps... many 3rd party applications have configuration items, inside the application, allowing you to order the application to use a data compared to another channel. What I always do is run my apps use BIS... in this way, they will follow along as BIS shifts between WiFi and my network of business data. But, if (for example) you configure an application to use only your corporate data network, while the app can avoid past well after BIS BIS to WiFi, and this app may well continue to consume data out of your network connection data carrier, even if BIS moved to WiFi.

  With older OS levels, you had no choice, but to leave the "Data Services" set on "on" any channel to use, which often caused the situation described above (BIS on WiFi, but some consumption of carrier data app)... disabling the Services of data, these levels of older OS, BIS-level data for all channels off including WiFi. With the later levels of the operating system (somewhere in the OS7 range, I remember well), you can actually turn off the parameter Data Services and wireless leash... that allows BIS to still work on WiFi, but prevents any application using the data carrier network regardless of how the application is configured.

  But... I'm curious... you may have about the features that only work on SmartPhones BB, yet your profile on this site says you have only a PlayBook, in which case none of this applies since the PB has no radio has WiFi and mobile only. But, you posted this in the "BOLD" of this site section, so you could guess assumes that you have a "BOLD" in addition to your PB...

  Good luck!

• How to stop a network connection?

  Hi all

  I use the following method to post data to a server and get the answer.

  mNetworkAccessManager->post(mQNetworkRequest, data);
  

  It takes a few seconds for data display and retrieve the response. While the process is in the Middle, if the user clicks a Cancel button, I want that app stop (close or disconnect or cancel) this network connection. But I don't know how to stop a network connection. Everyone please help.

  Thank you

  This should help:
  https://developer.BlackBerry.com/Cascades/reference/qnetworkreply.html#abort

• BlackBerry Smartphones BB Curve 8900-no wifi or mobile network

  I've updated the OS on my blackberry and now I can not wifi or mobile network to work!

  Ouch!

  You have turned on mobile network? What do you see in the top right of the home screen to the signal indicator?

  Sometimes do a reboot on the BlackBerry simple thus reconnects to the network: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.

• Adapter not detected network - need help ASAP

  I want to install ESXI 5.5.0 on a HP HPE-170 t for test purposes and for a reason that the network adapters are not detected... I tried both ESXI 5.5 base ISO, then the custom for ESXI 5.5 HP image and both do not detect network cards.

  I need this resolved as soon as possible.

  Ideas or recommendations or solutions possible?

  Evening,

  There is no easy way to solve this problem since the HPE-170 t is not on the HCL.  I think you have two options:

  1. install a NETWORK adapter that is on the HCL and install 5.5

  2. write / find a driver for your network card and install it in a customized image of ESXi.  Then install ESXi

  Sorry that I have not better new... you can also run Vmware workstation on this machine and run ESXi as a virtual machine... that's my way around the HCL.

  Thank you

  J

• No WiFi not detected or found network?

  My IPad 2 worked very well yesterday am and now cannot find any network or join manually. I have closed, refreshed, restored, updated to 9.3.4 and now does not work. I just restored to the factory settings and can not get past choose a WiFi installation question. So, now is this trash or is there a solution that I tried to do this for 8 hours now, very frustrated. Can I go back to an older version of IOS?

  It's on iOS 8, but may contain some clued...

  http://www.iphonetopics.com/iPad-2-iOS-8-no-service-bug/

• WiFi stop working when 9.2.1 upgrade... A does restore the network configuration and still does not!

  from one day to the next my phone is suddenly being updated to 9.2.1. Since then my wifi was NOT working period. Have excellent wifi signal and still absolutely nothing. I reset the network settings and nothing works. Never been a problem until this 9.2.1 update

  I have the same problem after updating ios 9.2.1