Will be a rune photoscanner Epson 1200 on window 7 64bits sytem

Similar Questions

• Satellite P10 - sometimes it will not be running

  Hello

  I have a problem with my Toshiba Satellite P10 (bought in 2004).
  Sometimes it will not be running (no air conditioning, no battery) and sometimes the "Shut down" - the dialogue appears as if I had pressed the power button (really, I have not). Then, he died instantly, and I can't turn it on. Rarely turns without touching the power button a few minutes later.

  First, I assumed that the reason was the envelope, but recently the same problem appears despite the case open.

  Finally, I think that the problem is caused by a defective power controller chip. So, I read that I could at least try it deflexing by a hairdryer. This is why I would like to know where the power controller chip is located on the motherboard and how do I recognize it.

  Thanks in advance!

  Sebastian

  Hello

  [If your notebook won power t on sometimes you check out this article: what steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  But I think that no one here can tell you where the power controller is replaced and if you can fix it yourself or not. Here he s only one user to user forum and if you have these technical questions should ask a technician for laptop (authorized service provider) for help. Guys have access to all the databases of Toshiba and can order spare parts Toshiba and it would be no problem for the guys to repair the device for you. ;)

• HP Officejet Pro 8500 A909 all: sorftware HP installation program will not stop running

  I recently uninstalled the software and drivers for my printer as suggested here.  I installed the drivers and software the latest complete features of the HP customer service.  Now the program will not stop running even after it has completely installed. The disc in the picture will not stop running and the window does not close.

  Hey @David146,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the judgment of some installation of HP software to run on your PC of Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your PC, press CTRL, ALT and DEL keys at the same time.
  2. Click Start Task Manager.
  3. Select the HP software from the list.
  4. Click end task.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• If I upgrade to Windows 7, Windows Vista, which will lose if anything, and I'll always be able to run all my programs for Windows Vista?

  If I upgrade to Windows 7, Windows Vista, which will lose if anything, and I'll always be able to run all my programs for Windows Vista?

  Whether if you lose data/programs, it depends on the upgrade path you choose.

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• None of my programs will open or run, cannot run the files downloaded from the internet, either to try to resolve it.

  I am running windows XP Pro and am unable to open any programs at all.  I was uninstalling some programs add and remove applications in Control Panel and I think I deleted a necessary program, file or something because right afterwards none of files or programs would be open. I get the error the file extension that is not associated with this file. I can't open the system restore program to restore the computer to an earlier configuration. I tried to get a regestry cleaner to fix regestery errors, but none of those I work. I am able to get on the internet and e-mail but am afraid the computer because it cannot be started again. I tried to load a regestery cleaner from the internet but nothing will load or run it. Help!  I also tried to change the program that opens files, but went wrong, and now all files are associated with windows internet explorer 8. I have no idea how I did all this and come back to this computer from the place of the computer because the old hard drive died on me and they put in another. It was working fine until I felt the need to clear up disk space and delete some old programs. I'm sure I messed up and deleted a file that was necessary to open others. I don't have the XP disk to try a fix and nothing in the pages of microsoft download will run. Oh please I don't want to take that back to the computer type that will charge me an arm and a leg. I just made him pay $ 200 last week. Any help will be great.

  Hello

  ·         Do you have an error message when you try to perform the system restore?

  Follow these methods and check if that helps.

  Method 1:

  Step 1:

  Follow the troubleshooting steps form the article and then try to perform the system restore and check if it helps.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

   

  Step 2:

   

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Method 2:

  If the problem persists, I suggest that you try to perform system restore in Safe Mode and check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open.

  Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!

  original title: AutoPlay

  Hello

  You can fix the error in reading auto/AutoRun.

  AutoRun/AutoPlay does not work when a CD/DVD is inserted
  http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm

  AutoPlay - Autorun does not not under Vista
  http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  Troubleshoot AutoPlay
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

  CleanHandlers - AutoPlay Cleanup utility
  http://WindowsXP.MVPs.org/autoplayhandlers.htm

  See this and also scroll the messages below.

  How to change the settings for AutoPlay Vista
  http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.html

  In the opposite direction might help.

  How to add entries customized AutoPlay in Windows Vista
  http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlay

  I hope this helps.

  Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!

• My screen saver is set on various photos & first, they light up but they will not stay running

  Original title: screen saver

  My screen saver is set on various photos & first, they light up but they will not stay running, the screen goes black & I do not turn off my computer. I want pictures to be constinltly running.

  Hi mel merrill,.

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you receive an error message?

  4. do the computer in sleep mode?

  Method 1

  See the link below and run them the fixit tool available, check if it works.

  Windows Photo and slideshow problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2

  If the previous step fails, then you need download and install the updated drivers for the graphics card on the computer by visiting the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black vista Windows 2009! system will not stay running...

  my windows system will not stay running and shuts down my computer after maybe running for 10-15 minutes... says also download 3 of 3, but instead of blocking it loads windows and then I have no sound what either.  also used windows open sometimes it always ask if I want to run windows normally know, my computer was repaired and when I came back started all this junk, please if someone can help me send me an email to * address email is removed from the privacy *. and thank you for your help.  Oh yes, it keeps asking me for my windows vista black 2009 key that I do not have...

  Black of Vista is NOT supported by Microsoft.

  Go to where you downloaded from / got fix for support.

  Mick Murphy - Microsoft partner

• HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

  Printer of opportunity, so no guarantee: it out of the box, plugged in and set up. I was able to connect wirelessly to my computer, but I don't have the right to ink cartridges. When the ink is right, I plugged it again. This time the printer power not on at all. The only thing that happens is that the signal power light briefly when the first powered. This isn't a loose thread, because I can only duplicate the symptom when connecting, not when moving or unplug the device. It isn't food, as I have him succeeded and get the same exact symptom. (PS, thanks for the power supply internal easy-to-swap!)

  Is it a kind of fashion 'sleep'? Any suggestions as to what this is. I am rather stuck with it since I bought the ink and an additional power supply, so I would like to address them. Help, please! Thank you!

  Hello @azvlr,

  Welcome to the Forums of HP Support!

  I understand you are having feeding problems with your used HP ENVY 5530 e-all-in-one printer. I see that you have already installed a new set of ink and replaced the internal power supply without result. Unfortunately at this time if a new power supply fails to solve the problem of flashing light output that the next step would be to use the printer.

  Please take a look at this paper Support HP "no power" to ensure that all steps are completed that follows: The HP printer will not be running or to respond when the power button is pressed

  The HP Envy 5530 is always a newly released product. Therefore, I highly recommend contact our telephone Support queue to explore additional options. If a replacement printer is necessary food and ink will not be wasted because they can be used in the replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Regardless of the status of the guarantee, please call and see what additional options can do for you. I wish you good luck!

• CS6 will install and run on Windows XP Service Pack 2

  We no longer seem to be able to deactivate/activate CS3 on our system. I assumed that this is to do with our network or firewall settings.

  As an alternative, I have watched the replacement of our licences of CS3 with CS6 long but note that the requirements in Service Pack 3 on XP.

  It will install and run the Service Pack 2?

  Adobe has never taken care of XP 64-bit. You try to run software designed for XP-32 bit SP 3 on 64-bit XP SP 2. With Microsoft, abandoning all support and updates for XP in the following months, it seems that the right time to upgrade. You try to run the software CS 6 will be an exercise in soymeal.

• HP Simplepass will not work after reinstalling Norton 360 on windows 8

  Hello:

  I am running Windows 8 on a new computer dv6 HP Envy.  I use Norton 360 anti-virus.  Norton apparently does not work with Windows 8 correctly b/c every time I have download updates via Norton I can't run all the tests.  So I uninstall Norton 360 and reinstall, which allows then to Norton 360 works correctly.  HOWEVER, whenever I do that (which is at least once a week and is VERY VERY VERY VERY BORING!), HP Simplepass DOES NOT at all.  It says in the device, biometric devices Manager:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  HELP HELP HELP HELP!  You pay tons of money for a new computer and it has constant problems.  Can not a fix it or give me some help to fix it?  This irritates me a LOT and will probably cause I DO NOT to BUY another product HP or Norton MORE EVER!

  Owner of unhappy HP,

  Josh

  Well, you could just not use Norton.  I confess that I'm not a fan of Norton, so the decision would be easier for me that it could be for someone else.

  There are a lot of other options out there that will work for you.

  =====================================================================================

  The Windows Defender software has been reorganized for Windows 8.  Not everyone says we should run with this one. It is worth visiting and worth implementing in your first line of defense.

  Windows Defender has the advantage that it "plays well with others", in other words, you can run this program in collaboration with the other security.

  Windows Defender will not 'take down of your computer' or make unusable just because you turn it on.

  HP computers - solve and protection against viruses on your computer (Windows 8)

  More information about Windows Defender:

  Activate Windows Defender in Windows 8

  OK, what to do?

  If you want, take a look at Avast Anti-virus.  There are paid and free versions.  The software has a good reputation and is easy to install and use.   The paid version (Avast security) has a number of features, including network monitoring, control rules and a 'sandbox' in which you can run restricted access programs (for banking, etc.).

  Other options can be found at:

  Overview of the security of Windows 8

  Comment:

  My personal experience with Kasperky includes some of the same adventures that I had with Norton - I have succeeded with an older version of the software, so closely bind things that I managed to block the system.  It's real easy to Bumble and more difficult to manage that I liked.  Great software - I doubt that anyone else could have hacked the system easily - I could not get anything to run, I doubt that anyone could have dug made far away in the computer either.  The smile.

  =====================================================================================

  SimplePass, in particular, has an aversion to Norton, even though I've heard of him along the Norton software.

  • You can try a few things to get SimplePass works again:

  Reset the laptop:

  Laptops - forced Reset to solve Hardware and Software questions waterproof Non-removable battery

  Laptops - use Hard Reset to solve Hardware and Software issues - removable battery

  Try reinstalling your current validity sensor driver:

  • Control Panel > display icon > device management > biometric devices > Validity Sensor >
  • Right click on the driver Validity Sensor and "Uninstall" (do not remove IT)
  • Restart / reboot the computer and log in
  • The driver will reinstall it connect you to

  =====================================================================================

  Good luck!

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  See a Post that is useful - or who teaches you something you didn't know?

  See something that makes you smile?

  Click on the star of congratulations!  It is a nice 'Thank You' for the author.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• is it possible to run both systems, such as windows xp & windows 8 on a pc

  is it possible to run both systems, such as windows xp and windows 8 on a pc at the same time

  Hi Susan,.

  Actually run two at the same time?  N ° having two installed so that you can choose which you want to run?  Yes (as long as your computer can accommodate two operating systems and has appropriate and such pilots and you will understand the compatibility requirements and other rules for software application).

  How to do this depends on which two average you and your hardware (you could partition the disk to dual-boot, use readers separate for dual boot or create a similar to a dual-boot configuration, if the two you choose cannot work together in a normal dual-boot or use a Virtual Machine installed on an operating system to install and run the other OS and so on).  Certain combinations will be much easier than others.

  So the answer is it is theoretically possible to have two (or three or more) installed, but not running at the same time - but I guess it could be argued that a Virtual Machine means in fact the two BONES are technically running - but that's just the way it seems to me since you can use only one at a time) , but may not work in your specific situation depending on your computer hardware and bios, the software you use, which specifies the operating systems you want to be able to access separately and so on.  To do this, we need information much more to offer help.

  I hope this helps.

  Good luck!

  Kosh

• Windows Vista "Windows Installer service could not be accessed. Windows can run in safe mode or Windows install not installed correctly. »

  * Title *.
  Windows Installer not properly installed

  We just bought a new Dell with Windows Vista.  I tried to download i-tunes and I get the following error: could not access the Windows Installer service.   Windows can run in safe mode or Windows install not installed correctly.  I am not running in safe mode it should be setup of windows.   I am trying to install iTunes 8.0.2 Windows Vista 64-bit.  I found the info to repair Windows XP, but nothing for Vista.  Any help would be GREATLY appreciated.  I'm so frustrated.  Thank you.

  Hi BradandKim,

  We will try to start the Windows Installer service and see if that helps.

  • Click Start orb
  • Right click on computerand then click Manage.
  • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  • In the console tree, click Services and Applicationsand then click Services.
  • In the details pane, right-click Windows installand then click Start.

  Let us know if that fixes the problem.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "this computer is not running a genuine version of windows" I know that this version is authentic. How can I fix it?

  I get a window that says "this computer is not running a genuine version of windows" I know that this version is authentic. There is a link that says "resolve online", I clicked on the link and downloaded something. I went to open it, but I was warned that he could not identify the Publisher so I cancelled. This warning appears at regular intervals. What should I do?

  Your report does not indicate that a problem.

  apply the next update if you do not have and see if it solves the problem, then:
  http://support.Microsoft.com/kb/3024777

  Restart, then wait a bit to see if the problem is resolved, if not:
  then:
  Click Start, right click on computer
  Click on properties
  Scroll down to the Windows Activation
  Click on the link 'change product key '.
  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.
  COA certificate of authenticity:
  http://www.Microsoft.com/howtotell/content.aspx?PG=COA
  ??
  What is the certificate of authenticity for Windows?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
  or
  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

  http://support.Microsoft.com/kb/950929/en-us

  If the problem persists:

  Check your hard drive for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Wait and see if the problem is resolved later.

• How to run foxpro 2.6 in windows 7 home premiun

  Mr President.

  I am not abel to run foxpro 2.6 in windows 7 home premium.so I am not abel to my accounts with that and I am a foxpro programmer, I can't change my files prg also.so pls help me.

  I am waiting for your answer

  Hello paresh786,

  Thanks for posting on the Microsoft answers Forum.

  You will not be able to use Windows XP Mode in Windows 7 Home Premium version. You will need Windows 7 Professional or Windows 7 Ultimate to use XP Mode.

  If you are running Win 7 Home Premium, try VirtualBox (www.virtualbox.org) or other 3rd party virtualization programs and install a separate copy of Windows XP (family or professional edition) for this purpose.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think