WIN 7 SP1

Similar Questions

• Problem Lenovo Z500 USB 3.0 driver under Win 7 SP1

  Hello.. -What someone solved the problem with USB 3.0

  the Lenovo ideaPad Z500 Win 7 SP1?

  When I try to install the drivers for it, it gives me empty warning message and USB3.0 does not...

  USB 2.0 works great...

  There are photo which gives me after trying to install it... Please any help?

  Link to image

  Moderator comment: images > 50 KB (or total of > 50 KB) converted into programming. Community rules.

  Hello
  According to the device id, there are enumerous of pilots of different brands, take a look
  http://www.driveridentifier.com/scan/download.php?item_id=479153931&ScanID=0FC02914B60F4503B010CCAD5...

• Intel Centrino Advanced - N 6205 WLAN causing blue screen (BSOD) on Elitebook 8570w Win 7 SP1 64 bit

  Hello world

  In recent months, I use a 8570w Elitebook.

  I can't tell you when the problem started, but as soon as I unplug the notebook from the power supply and WLAN is enabled, I get a blue screen after a while. Sometimes, but not this oftehn, I encounter this problem even when the laptop is connected to the power and WLAN is enabled.

  I could not determine when exactly this blue screen, but it's certainly the WLAN (Bluetooth is disabled in the BIOS for the moment). It happens most of the time when I'm under two or more virtual machines with VMWare Workstation (version 9.0.2).

  The WIFI card is an Intel Centrino Advanced - N 6205. I tried several drivers (mid-2012 at the latest in April 2013) with a complete uninstall of the previous drivers. Without success. Operating system is Win 7 SP1 64 bit.

  Google helped me a bit and I found an Intel forum where people are describing almost the same problem with these Intel WLAN modules.

  Checked the Knowledge Base of HP and I am just find more messages do not deal with the new modules.

  Should I consider replacing the WLAN (guarantee) card? Someone knows the same issue and was able to find a solution/workaround?

  All opinions are appreciated.

  Thank you
  Jerry

  Hello world

  Finally, I have launched the Intel WLAN module and replaced by a Broadcom module (HP spare part number: 669832-001, Broadcom model: BCM943228HM4L) with the driver version: 6.30.223.228 (05.02.2014).

  This solved my problem of blue screen. Intel (same as last) drivers do not work with the configuration I have on my Elitebook 8570w and I gave up to find an another software/driver associated solution. In recent weeks, I can run multiple virtual machines in VMWare (9.0.4) without problems.

  Hope this information is of help to anyone who is struggeling with the Intel Centrino Advanced-N 6205 WLAN module.

  Cheers, Jerry

• Cannot switch to Win 7 SP1

  I have a HP Slimline s5670t. When I recently tried upgrading to Explorer 11, the installer told me that I have Win 7 SP1. The computer came with Win 7, but not SP1. I did my utmost to update and install SP1 only to find out that it will not be installed because I need a newer version of the graphics driver intell (http://support.microsoft.com/kb/2505743). Well it turns out that intel is unable to update the graphics driver on my hp because hp installed their own version of the innovative of it. I checked the hp driver updates intel graphics on their website and there is not a more recent available. So without an updated graphics driver intel HP, I can't upgrade Win 7 SP1.

  What I've read, SP1 fixed a number of security issues. So now it seems that I'm stuck with a computer that is not secure. You think that I should give her medicine for anxiety?

  Seriously, all the suggestions and help is appreciated.

  Thank you

  Doug

  More like hit a dead-end.

  Thanks Big Dave! This more or less worked, although I have not exactly follow your directions.

  I started with a factory reinstall and reinstalled the chipset intel and graphics drivers intel as you suggest. The only thing that I do not have to uninstall the graphics driver intel because I was afraid of not being able to see anything! Then, I did all the updates of Windows.

  After the adjournment, I reinstalled the original intel chipset and drivers graphic once more, to make sure.

  One thing I should mention is that SP1 has never as a possible update by using Windows Update. I guess it's smart enough to not to suggest a undate which cannot not be installed.

  I also found a page of windows support thereon (http://support.microsoft.com/kb/2498452) and took his suggestion (method 4) to install an update for the graphics platform (http://support.microsoft.com/kb/2028560).

  Because the SP1 is not an option under Windows Update, I downloaded and installed separately, and it installed! As a result, it's about 60 updates, and now I'm good to go!

  Thanks again! I would have given up without your help.

  See you soon,.

  d

• Ethernet problem W700 after hibernation after installing Win 7 SP1

  I installed Win 7 SP1 yesterday and now my W7 Enternet connections fail after awakening from hibernation. I have the most/all powersaving options got turned off/disabled.

  The W700 is in a Docking Station.

  Any thoughts?

  TNX,

  J

  I turned on my wireless connection and noticed two updates going on automatically I also noticed the icon "new hardware installation" in the system tray, but is closed before I could tell exactly what material. In any case, everything now works OK again.

  J

• 70073712 error code when you try to install Win 7 SP1

  I am using Windows 7 32 bit on a machine with 4 GB of RAM 540 i3.

  I get error code 70073712 when trying to install Win 7 SP1 via windows update.

  I disabled all startup programs and services not microsoft.

  I ran the fix - it utility and update v10 system utility preparation x 86.

  I have still some errors on the log to check ON that I can't fix, I don't know if they help or not.  Log is shown below:

  =================================

  Preparation of control system was updated.

  Binary version 6.1.7601.21645

  Package Version 11.0

  2011-02-25 22:18

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifestx86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifestx86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifestx86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3

  (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifestx86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifestx86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifestx86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifestx86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6

  Summary:

  Seconds executed: 58

  Found 9 errors

  County of apparent CSI and S256H Do not Match Total: 2

  Manifest CSI has not catalog check the total count: 7

  Unavailable repair files:

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifest

  winsxs\manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifest

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifest

  winsxs\manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifest

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifest

  winsxs\manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifest

  winsxs\manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifest

  winsxs\manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifest

  winsxs\manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifest

  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Can anyone offer any help on solving this problem and get installed SP1, as I'm stuck now!

  Thank you

  Thomas

  
  

  Hello Thomas_Si,

  Thank you for your message.  Please, try the following steps:

  Since you have already downloaded and run the system update tool, you can move on to step 2.

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the details of each scan or utility. We can't wait to hear back on your part.

  See you soon

• Win 7 SP1 upgrade to win 10 fails

  Win 10 update fails due to incompatible display (see screenshot below). I use Win 7 SP1 with a NVIDIA GEFORCE 9400 GT (pilot 341.95). Any suggestion would be appreciated. Thank you.

  

  You try to use the tool of creation of media Windows 10:

  https://www.Microsoft.com/en-us/software-download/Windows10

  And upgraded using this tool and you can ignore this message and you are able to install Windows 10, but it leaves you with a default Windows driver. Then you can visit the Web from NVIDIA site and download the latest driver and then install it in compatibility mode.

• Impossible to back up only the system in Win 7 SP1 x 64 image (error code 0 x 80780020)

  I am unable to back up only the system in Win 7 SP1 x 64 image (get the error code 0 x 80780020).

  Also I can not create restore manually points, nor is Win 7 automatically create (that is to say, I have zero restore points) of restore points

  Good suggestions informed please?

  concerning

  JED

  I wonder if this is disabled: Microsoft Software Shadow Copy Provider (swprv)

  The Microsoft Software Shadow Copy (swprv) provider creates backups of important system files and settings. When you install the software, install, or update of windows, that a shadow copy is created to wrap something bad happens during the installation.

  Service name: swprv

  • Description: Manages shadow copies of volume based on software taken by the Volume Shadow Copy service. If this service is stopped, shadow copies of volume based on software cannot be managed. If this service is disabled, any services that explicitly depend on will fail to start.
  • Path to the executable file:C:\windows\System32\svchost.exe -k swprv
  • Startup type: Manual

  services.msc

  Microsoft Software Shadow Copy Provider

  This indicates, must be handwritten, but mine is set to auto

• Satellite A300 - cannot install the Win XP SP1

  I tried to install my MS Windows XP existing operating system - original disc, has worked several times before - a model A300 - 29K, and it has not worked. (blue screen, error)

  (Vista can be installed - if the machine is OK)

  The question is: is it possible, that this model is not compatible with XP?
  (this version of XP is old enough, only SP1 - I usually improve with SP3 after installation)
  No idea how to install my version of XP on it?
  (the machine is sold without an operating system - so not any disk with it)

  Thank you

  Hello

  Of course, you can install Win XP. It s no matter what version is XP Pro, Home, MCE, etc..
  The problem may be the lack of SP2 and SATA drivers!

  First, you must create a disk for Win XP SP2 and SP3.
  For this, you can use the nLite tool

  Google for the nLite for more information

  Secondly, you use nLite to include the SATA drivers for Win XP disk.
  The SATA drivers are part of the Intel Storage Manager

  There is a lot of discussion on the installation of the driver SATA I recommend to use the advanced search option and read the content.

• Satellite C650 - after installing Win 7 SP1, computer does not start

  Hello

  When I tried to launch the Win 7 Service pack 1 update, it 'impossible' and now I can't start my computer, even in safe mode. When I turn it on, no matter what I do (including let it run or by pressing F8) results in the message:

  "For Atheros PCIE Ethernet Controller v2.0.1.0 (15/12/09)
  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE - ROM
  No boot device - insert boot disk and press any key ".

  i.e., I can't go to the start menu.

  The only thing I can access is the utility Boot screen by pressing F12. Experience with Service packs, I'm trying to access the system restore to undo the update, but I can't get there.

  Win 7 came preinstalled on my computer and my computer was working fine before I tried to install SP1, so all the solutions / advice would be much appreciated!

  Thank you

  Hello

  When you see this message PXE for some reason laptop cannot detect the HARD drive and use it as a boot device.
  Enter please the BIOS settings and check if the HARD drive is listed correctly there. By default the BIOS settings and try to restart your laptop.

  Please post comments.

  BTW: you created the recovery DVDs?

• Reinstall Win 7 SP1

  Hello

  I have a laptop lenovo x 201 holder of a license for windows 7 Professional x 64. I would like to reinstall Win 7, but I would use a disc (USB key) that SP1 is already included. Is it possible to use my license key from the sticker on my laptop in order to activate a Win 7 WITH SP1 included? When I got the laptop he had not SP1 is installed.

  Thank you

  Razvan

  If you are installed on the x 201 & already have an OEM Activation win 7 then use ABR [activation backup & restoration] to save the OEM and then install win 7 then restore the OEM activation. The key on the laptop will work, but some people say that they had to use the phone activation to activate

• Can I switch to Win 7 SP1 of Vista Home Basic (without Service Pack)?

  Hello, currently I run Vista home basic 32-bit without the service Pack installed. I did once try and install but I got was a never-ending startup sequence (the BONES do not start) and I had to restore a backup copy of previous Vista before installing SP1. So it's just a quick question: can I go directly to Win 7 Ultimate 32-bit SP1 without having all the service packs currently? I don't have a lot of free time to do a clean install and restore programs and games, and configure them.

  Microsoft recommends that you have at least Service Pack 1 installed.

  You can try to install without MS, if you wish.

  And if you have a problem, follow this information.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-au/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  See you soon.

• Failed to install Win 7 SP1 continues

  After almost a collective 50 hours trying to diagnose and fix the problem myself, I gave up and hope that an Assistant here can help me to solve it.

  I am on Win 7 Starter on an Asus Eee PC and Secunia has begun to remind me that I need to DL SP1. Of course, it's in my list of tasks Windows Update. I had a series of other necessary updates, then tried to DL them all at once. DL is omitted a certain percentage or perpetually hung at 0%. I then cleaned the Software Distribution folder and tried DLing updates again, one at a time. Each worked well, until I came to the SP1 download. He either quickly failed and showed the 80070005 error or got to about 90% and then failed showing the 8024200d error.

  Under the view of the internet, I ran the function of sfc/scannow in cmd (no problem), then the command chkdsk /r /f. He said he would perform the task when you restart, but when I did, I get a black screen and have to wait 30 min - 2 hours before the login screen appears again (and I find that the chkdsk feature had not been executed). I also tried to repair C: after he said contained errors with IObit Disk Doctor but who has suffered the same problem.

  I also downloaded the preparation of updated and MS FixIt tool. Once URT has been downloaded, nothing happened (this is normal) and the latter, while the identification he had a problem with WinUpdate, couldn't solve it.

  The only other relevant points I can make is that I don't seem to have downloaded the update of blackhole, I use the antivirus diligently but have tried to update with this option off (MSE) and often use as Advanced System Care optimization software and Revo Uninstaller (is it a registry problem?)

  Please, please can someone help.

  Hello

  Thanks for asking your concern in Microsoft Community!

  I see from the description of your post, that you can not install Windows 7 service pack 1.

  I understand the inconvenience caused to you. I've certainly you will help solve the problem.

  You can cross check if you did everything correct.

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-in/Windows7/install-Windows-7-Service-Pack-1

  You can also consult the following link:

  Problems to install a service pack for Windows 7 or Windows Server 2008 R2

  http://Windows.Microsoft.com/en-in/Windows7/troubleshoot-problems-installing-Service-Pack

  If you need help on this or you need help on Windows keep us informed.

  We will be happy to help you!

• Satellite L300 - clean install Win 7 SP1 64 bit

  I just did a clean install of Windows 7 64-bit, replacing the normal 32-bit Vista that comes with the laptop.

  The facility has been good, but I have a few questions about the following:

  I adjusted the automatic run settings to ask every time for all selections. The problem is that when the game DVD in WMP or VLC disk reads but is noisy. It is very good for the s CD without excessive noise. The acoustic silencer on the download site is for 32-bit, but can be used in this laptop. In the original Vista there is no noise at all, so I wonder if there is other parameters that can sort this point, otherwise I'll have to keep changing things manually with the acoustic silencer.

  I noticed a very low noise coming from laptop (like a lighter version of a business when you're boarding Jet it). I ran a video memory Stress Test CE and he showed a few errors. If I reduce the brightness of the screen there is less noise so I wonder if it's something to do with the Panel of inverter of screen I'm sure that's not the HARD drive or the cooling fan, but it could be something on the motherboard.

  On the backup plan Acronis will slow down my system or are Win 7 OK backup options?

  Thanks a lot for all the possible solutions to these problems.

  A long time ago I've installed Win7 32 bit on friends Satellite L300. It worked perfectly. Much better than original Vista.
  > I still don't know what is the best test for the screen.
  I put t understand what kind of test do you mean. I hope that you have installed the right display driver and LCD works perfectly with a native resolution.

  Win7 recovery with Acronis image creation is, generally, the right decision. With this disc, you can install Win7 again and again very rapidly and you should not install every single driver separately.

  If you want to keep this laptop any longer I think it is worth to buy it. One last thing: you will buy it once and you can use it in the future too if you decide to buy the new laptop or PC.

• Impossible to install WIN 7 SP1 on NB250

  When I run Windows Update on the laptop NB250 installing Windows 7 SP1 is recommended. Even if the computer is not able to install this update and shows error code 800F0829.

  In this site, I learned that NB250 is compatible with SP1. That is why I would ask a solution for this problem. Thanks in advance for your collaboration.

  After the error code the computer show something like "connect the computer to an electrical outlet and try again" if so try the update with your computer connected to a power supply.

  If this does not work there is a troubleshooting guide for updates: -.
  Open the Windows Update troubleshooting tool by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click Fix problems with Windows Update.