Similar Questions

• Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.»

  Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• Windows XP Setup: Netframework 2.0 SP2 on Windows server 2003 and generic process for win 32 services

  I have Windows XP. Since May 15, when I open and close my PC, the same updates seem to be installed: Netframework 2.0 SP2 on Windows server 2003 and Windows XPx86 KB2804577 and successfully installed several times per day, approximately 33 in total so far. Is it OK? How can I stop it?

  In this time (also some time before)

  When I open my PC a pop up displays: generic process for win 32 services... to allow or not allow.

  Then: I have not authorized it.

  I will allow, when he will appear again?

  and that's why the same safety NET Framework 2.0 appears again and again, when I open and close the PC?

  What should I do?

  Kirsten

  Dot Net 2.0 has an update to 'fix' his kb928365

  Also, the 2.0 is old enough, have you tried to update for .net 3.0 or 3.5

  Try this link to update 2.0, youre problems will probably end.

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=21

  Also, once installed, go to windows update...

• Win server 2003 machine starts file system error

  My Win Server 2003 has suddenly got a C:\Windows\System32\system file is missing or corrupt error. We were able to replace the file in the repair folder and got the server up and running.

  However, Active Directory seems to have disappeared. The server has not yet a domain listed in AC. All entries are simply not there.
  How is it possible and how can pick us up or recreate AC? A backup copy of the AC, unfortunately, had not been done.
  Any help is appreciated.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the HE public Pro on TechNet. Please post your question in the Technet Forum. You can follow the link to your question:

  General Forum(Windows Server) Technet

  Hope this information helps.

• Net work with Win Server 2003 Logon

  I have a problem to connect to a running with Win Server 2003 Net Office job, my OS Win - 7 professional 64-bit desktop above. Then the system Win-7 sailed into this network and integrated into the field of the system?  are there procedures that could help maintain the system in his?

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Driver Officejet 4620 Win Server 2003 32 bits

  I want to install the Officejet 4620 in my network with a Win 2003 (32 bit) server, is there a driver, I can use?

  Hello

  I see that you have a question about a certain driver for Win Server 2003. Unfortunately, there is not a driver available for it, but you can install an alternate driver such as the 990 c driver.

  You can follow this thread made Shane and install the 990 c driver.

• Unable to connect to win 7 ultimate laptop for win server 2003 r2

  I have win server 2003 r2 ent to connect to the internet through a router - wired.

  Win 7 laptop holiday connected wireless to the router.

  I am not able to connect win 7 to the server.  I can RDP server on the laptop.

  I tried to connect laptop plugged into the router, wireless disconect and see if I could connect to the server. no luck.

  any help is appreciated.

  Hello
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
   
  It will be useful.

• ESX 4.1, Win Server 2003, ESET NOD32 Server Admin

  Greetings!

  I moved my ESET NOD32 physical server so that it became a virtual machine running on ESX v4.1

  I used the VShpere customer, importing machine tools to achieve this.

  My virtual machine sees the network and the internet very well and has

  no significant errors in the server log.  It is currently running Win serv 2003.

  My ESET NOD32 client machines (PC, servers) now States, the server cannot be contacted.

  We will use the default port, 2223 for admin server for example.

  The Windows Firewall is DISABLED on the server of ESET NOD32.

  Is there something in ESX / VSphere that prevents certain ports to be used? A place for 'open port '?

  RSVP

  Thanks in advance...

  Checking configuration of the customer as a client to connect to the ADI of server - name or ip address, verify a network connection to the server (ping), also check the status of the blink of an eye on the Server service.

  ESXi is not any firewall between VM and the rest of the network.

• Limit Max SGA on Oracle 9.2.0.8 on Win Server 2003 SP2 (32-bit)

  I am trying to increase the total SGA to 4 GB on an instance Oracle 9.2.0.8 on Win Server 2003 SP2 32 bit version. Is this possible? I tried to find something on google and metalink but has not found any post answering my question.
  
  In my attempts:
  I did 4 or 5 attempts every time try a step further, as explained below. On the issue of a start command, whenever I get the following error and the instance would not start.
  ORA-27100: memory realm already exists to shared
  
  (1) I changed the sga_max_size in the spfile to 4 GB using
  * "alter system set sga_max_size = 4294967296 scope = spfile" * "
  & stop instance successfully. It will not re-start and ORA-27100 I.
  (2) I stopped and restarted Windows Oracle service using the Task Manager, but no luck and I have seen the same error.
  (3) I tried to restart the server, but that did not help either and I got the same error.
  
  Whenever I have to start the instance with the ORA (pfile) init file and recreate the spfile to restore the old settings.
  
  Links or suggestions?

  On Note: 225349.1, it is stated that you need to use ' / EAP ", or" / 3 GB/PAE "switches to the boot.ini file, but there is a restriction:
  "It is important to note that this extra memory can ONLY be used by Oracle in the form of an increase in the value for.
  DB_BLOCK_BUFFERS.
  Read the Note: 373602.1 is also recommended, he concludes:
  "It should be noted that this is at best a short-term band-aid and the.
  real long-term solution is to upgrade to a version of operating system 64-bit"

• Win Server 2003 network share, the files are read-only

  Friday, the server crashed, I reinstalled the operating system of windows server 2003 and was able to use the old hard drive as a slave for the files to transfer the files to a network drive, that they appear only as read-only, and users can not save files that I changed every permission that I see but nothing works thanks for your help

  Mike Zamora

  Hello

  Try to post your queries in the link below for the best results:

  http://social.technet.microsoft.com/Forums/en-US/category/windowsserver.

  Hope the helps of information provided.

• I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared...

  I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared for all users when you access from anywhere.  I deactivated and reactivated the snapshots and it won't come back please advise...

  Hello ErekBye,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• Cannot install KB979909 and KB979906 for Windows 2000, Windows Server 2003 and Windows XP

  Original title: Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 security update for Windows 2000, Windows Server 2003 and Windows XP x 86 __Microsoft .NET Framework 1.1 SP1 (KB979909) update for Windows 2000 and Windows XP (KB979906) __KB979909)

  I was warned, I got updates, I clicked on install

  he installed an and failed both

  I can't determine how to solve this problem, and the little shield that warns me still here says I need to update

  the explanation refers to the sp?

  IM unaware of what these elements affect

  See the RESPONSE message in this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/5dc22ff1-ba9a-4a3a-9f19-49e85908c4c9 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• reinstalled Windows Small Business Server 2003 and Intranet failed during installation

  I had to reinstall Small Business Server 2003 and I can't after setting up where Exchange, etc. are installed. It passes through Exchange perfectly and blocks on the Intranet tools on Disc 3. I use the "fixed" CD because the 3 original drive was corrupted when we bought SBS2003. Our version is the original pre-service pack 1. Is there anyway to download a disk image 3 where my disk is damaged? It seems good, no scratches, scratches or dirt.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Microsoft Sync Center with Windows server 2003 and Windows 7 questions.

  I have an end user who is having an interesting question, the environment is Server 2003 and Windows 7 Pro. This end user was able to use the Center to sync several months ago and had no problems, what they remember. This user also has access (authorization) to access the other users on this network share folders. Two weeks ago, they have lost this ability, and this is where it gets interesting for me.

  When I have their Sync Center activated, I see that this issue to end users. When I turn off Sync Center, all other folders (NEB, they leave too) appear more their. As soon as I re - activate sync only Center files to end-users are available again. I tried to delete the files 'offline' and I tried to go directly to other users files directly with no luck. The only thing that seems to work is to turn off Sync Center, but the user does not like that because they want their backup files. The share is created for the redirection of "My Documents" is administered through Active Directory. I have about 60 other users who do not seem to have this problem because they are the only one who has permission and must have access to other peoples records.

  Any help or advice would be greatly appreciated

  Hi Frank,.

  As you have problems in a domain environment, please post this thread in the TechNet forum for better support.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverfiles

• Supported and compatibility against Win Server 2008R2 and Win Server 2012R2

  Hey VMware,

  I'm looking for some information like support and compatibility of the product for Win Server 2008R2 and Win Server 2012R2 platforms below.

  Here is the application name and version:

  VMware vSphere Client 4.1.0.32733

  VMware vSphere Client 4.1.0.17435

  VMware vSphere Client 4.1.0.14766

  VMware vSphere Client 4.1.0.12319

  VMware vSphere Client 4.1.0.34274

  Please provide the results of the support and compatibility for above mentioned OS platforms, also you can provide details if all other support/contact channels are available.

  Thanks in advance.

  VMware KB: Supported operating systems hosts for vSphere Client (Windows) installation