Unable to connect to win 7 ultimate laptop for win server 2003 r2
I have win server 2003 r2 ent to connect to the internet through a router - wired.
Win 7 laptop holiday connected wireless to the router.
I am not able to connect win 7 to the server. I can RDP server on the laptop.
I tried to connect laptop plugged into the router, wireless disconect and see if I could connect to the server. no luck.
any help is appreciated.
Tags: Windows
Similar Questions
-
Unable to connect to the network - Windows 7 on Windows Server 2003
original title: Six Windows 7 computers running on a network (Server Windows 2003 R2 Standard Ed) would not connect to the network in the morning, startup repair is unable to repair
We have 10 PC running Windows 7 on a network (Server Windows 2003 R2 Standard Ed) and 6 of them started up the Start Up Repair screen the same morning. Run startup repair but then received the message "Startup Repair cannot repair.
Windows could not start. A recent change in hardware or software may be the cause. Startup Repair cannot repair.
Details of the problem: event name offline Startup Repair
Signature 01 6.1.76.00.16385
02 6.1.76.00.16385
unknown 03
04 21200896
AutoFailover 05
2 06
07 0x6b
OS version 6.17600.2.0.0.256.1
Locale 1033 ID
In the details to diagnose & repair was the only entry that indicates a problem
First cause is parameters 6 unknown error checking b 0 x 0, 0x0, 0x0, 0x0
In all cases the system restore worked but had to come back a week, him the day before restore point would not work. In one case, the problem is that system restore and the next day does not, eventually reinstall.
Clues or tips as to what has caused this?
Kind regards
GinSeek
http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/
Above links are for server communities.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to / stationed there.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Net work with Win Server 2003 Logon
I have a problem to connect to a running with Win Server 2003 Net Office job, my OS Win - 7 professional 64-bit desktop above. Then the system Win-7 sailed into this network and integrated into the field of the system? are there procedures that could help maintain the system in his?
This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
ESX 4.1, Win Server 2003, ESET NOD32 Server Admin
Greetings!
I moved my ESET NOD32 physical server so that it became a virtual machine running on ESX v4.1
I used the VShpere customer, importing machine tools to achieve this.
My virtual machine sees the network and the internet very well and has
no significant errors in the server log. It is currently running Win serv 2003.
My ESET NOD32 client machines (PC, servers) now States, the server cannot be contacted.
We will use the default port, 2223 for admin server for example.
The Windows Firewall is DISABLED on the server of ESET NOD32.
Is there something in ESX / VSphere that prevents certain ports to be used? A place for 'open port '?
RSVP
Checking configuration of the customer as a client to connect to the ADI of server - name or ip address, verify a network connection to the server (ping), also check the status of the blink of an eye on the Server service.
ESXi is not any firewall between VM and the rest of the network.
-
Win server 2003 machine starts file system error
My Win Server 2003 has suddenly got a C:\Windows\System32\system file is missing or corrupt error. We were able to replace the file in the repair folder and got the server up and running.
However, Active Directory seems to have disappeared. The server has not yet a domain listed in AC. All entries are simply not there.How is it possible and how can pick us up or recreate AC? A backup copy of the AC, unfortunately, had not been done.Any help is appreciated.Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the HE public Pro on TechNet. Please post your question in the Technet Forum. You can follow the link to your question:
General Forum(Windows Server) Technet
Hope this information helps.
-
Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.
Thank you for visiting the Microsoft answers community.
The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.
-
Driver Officejet 4620 Win Server 2003 32 bits
I want to install the Officejet 4620 in my network with a Win 2003 (32 bit) server, is there a driver, I can use?
Hello
I see that you have a question about a certain driver for Win Server 2003. Unfortunately, there is not a driver available for it, but you can install an alternate driver such as the 990 c driver.
You can follow this thread made Shane and install the 990 c driver.
-
is there a driver OfficeJet 4215 for Win Server 2003?
Is there a driver for the printer OfficeJet 4215 (USB) for Windows Server 2003? Or is there a special printer driver that can be replaced? I tried OfficeJet and DeskJet 990c, neither worked, no error when you try to print, simply nothing printed (print appeared in line print, but with 'print error')
Hello
I'm afraid the Officejet 4215 don't support no matter what Windows Server operating system, you will find listed by the specs below:
http://support.HP.com/us-en/document/c00058197
Additinally, using any other printer driver does not work for the connected USB printer, the printer drivers are essential to connect USB... I'm afraid can't be bypassed by another driver.
Kind regards
Shlomi
-
WIN server 2003 and CF administrator
I installed my server. Another is running WIN Server 2003 instead of the old Server 2000. I upgraded to 8.0 with all patches. I'm currently running Sun Java 6 (update 3). When I click a button 'Browse' in the cgi Director the browser closes. The fix for this knowledge?The problem turned out to be the Java JRE version. I uninstalled Java 6 and installed 1.4.05 and the problem solved.
-
Limit Max SGA on Oracle 9.2.0.8 on Win Server 2003 SP2 (32-bit)
I am trying to increase the total SGA to 4 GB on an instance Oracle 9.2.0.8 on Win Server 2003 SP2 32 bit version. Is this possible? I tried to find something on google and metalink but has not found any post answering my question.
In my attempts:
I did 4 or 5 attempts every time try a step further, as explained below. On the issue of a start command, whenever I get the following error and the instance would not start.
ORA-27100: memory realm already exists to shared
(1) I changed the sga_max_size in the spfile to 4 GB using
* "alter system set sga_max_size = 4294967296 scope = spfile" * "
& stop instance successfully. It will not re-start and ORA-27100 I.
(2) I stopped and restarted Windows Oracle service using the Task Manager, but no luck and I have seen the same error.
(3) I tried to restart the server, but that did not help either and I got the same error.
Whenever I have to start the instance with the ORA (pfile) init file and recreate the spfile to restore the old settings.
Links or suggestions?On Note: 225349.1, it is stated that you need to use ' / EAP ", or" / 3 GB/PAE "switches to the boot.ini file, but there is a restriction:
"It is important to note that this extra memory can ONLY be used by Oracle in the form of an increase in the value for.
DB_BLOCK_BUFFERS.
Read the Note: 373602.1 is also recommended, he concludes:
"It should be noted that this is at best a short-term band-aid and the.
real long-term solution is to upgrade to a version of operating system 64-bit" -
original title: I'm unable to connect my new laptop...
I'm unable to connect my new laptop which has a 802.11n modem to my router Linksys 2.4 GHz 802.11 g wireless. Try troubleshooting and it tells me to reset the router. Help...
Hello
Maybe this can help, http://www.ezlan.net/wireless.html
-
original title: cannot start service autoconfiguration WLAN and EAP services
I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."
I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.
I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.
When I tried to start the WLAN auto configuration service, I get the following error...
Windows could not start the service WLAN autoconfiguration on Local computer.
Error 1068: The dependency service or group could start.When I tried to start the service of Extensible Authentication Protocol, I get this error...
Windows could not start the service on Local computer Extensible Authentication Protocol.
Error 1053: The service did not demand launch or timely control.I searched the internet for the solution madly before posting here. Any help is greatly appreciated!
Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921
This link has the solution that worked for me.
-
Unable to connect a wireless printer with laptop computer since the reset wireless router
I have a wireless HP C4580 printer that connects to my Acer Aspire laptop using windows 7. The two have worked together very well for months. My wireless router stopped working a few days ago, so I had to unplug the device to make it work again is it. But since then, I can't get my lap top to communicate with the printer now.
I went all the problem of shooting and insured the printer is on line and set it as default printer. I even did a system restore, as suggested in the troubleshooting
With the help of the program are the two messages that I get now troubleshooting
1 that the C4500 series can be contacted via the network (this is the message that I had before the restoration also)
2 the C4500 series is not shared with the homegroupAll the tips are greatly appreciated in progressive simple language as possible as I am a bit useless with computers
I assume that the printer is all first directly connected on the router, then the laptop? Access the router and make sure that the printer is listed as a "wireless client" connection If this isn't the case, you should probably restore the wireless "link" between the printer and the router then the printer should work.
-
I have a computer that is running Windows Server 2003 on which I would like to connect to my ultimate Windows 7 running computer. I did everything it said in the videos and tutorials but I can't get the server to connect to the internet. I can connect via Office remotely, but it can not connect to the internet nor can any computer on my network server see only 7 PC Windows that the server is connected to. help, please!
Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/SMS/threads
Hope this information is useful.
-
EPMCFG - 10368, unable to connect to the database, check information for database
Hi all
Server: Windows server 2008 64-bit, and 64-bit Oracle 11 g
First of all, I have installed Oracle client 32-bit and 64-bit client then Database 11 g. Then, I installed the version hyperion 11.1.2.2. but at configuration time, I get the error message
EPMCFG - 10368 unable to connect to the database, see database documentation.
but the correct database information that I have given. Map of Loopback also installed Microsoft.
I spoke in the forums about this error, in this discussion, they wrote about tnsnames.ora. I need to edit in this file?
Kind regards
Mady
Published by: mady on March 20, 2013 10:47Hello
I have uninstalled and installed OS again once, now I am able to connect to the database now.
See you soon,.
Mady
Maybe you are looking for
-
Please tell me how I can proceed to save my passwords, bookmarks and history?
As time goes by, my computer crashes while I do resolve to immediately restore formatting, so in the process of losing a part of my data, that includes saved several passwords of accounts, history and bookmarks. So please, tell me how can I do to sol
-
Hello I am running the latest version of iTunes for Windows and run worm Windows 10 1511. I ripped a CD and iTunes uses the order of songs for the international version of it, not the Australian version which is what I have. How to import the correct
-
Hi I have the choice of the location is bad but there was a suitable. I just bought an HP deskjet printer 2510 and it copies Ok Ok scans and prints emails but woont print files. Help, please
-
Blocked dev Alpha B PIN device
My Dev Alpha B has been blocked recently. I already wrote several times to: [email protected] [email protected] [email protected] [email protected] Especially I have not yet received response. Btsbetasup
-
Test application built using JRE 5.0 on OS 4.6
I built an application using JRE 5.0 and it is fully functional on OS 5.0, but when I tried to test 9000 with OS 4.6 Simulator he could not open (exception at run time). Is that possible because the app is built using a different version of the opera