Win7-64 not install Samsung ML-2150series 64-bit printer driver on this printer on ethernet. keeps trying to install it on USB

Similar Questions

• Automatic update does not install 'ViewSonic - Bus USB and Ports, display controllers - ViewSonic VP2365WB.

  Windows update - AutoUpdate does not install 'ViewSonic - Bus USB and Ports, display controllers - ViewSonic VP2365WB. Any ideas? Thank you.

  Original title: Bus USB and Ports, display - ViewSonic VP2365WB controllers

  Windows update - AutoUpdate does not install 'ViewSonic - Bus USB and Ports, display controllers - ViewSonic VP2365WB. Any ideas? Thank you.

  Hide and unless the material was manufactured by Microsoft or the hardware manufacturer tells you that you should get the driver FROM Microsoft - do not install Microsoft device for material non-Microsoft drivers.

• Do not install new computer USB devices.

  My computer is not install drivers for the new USB devices.  It reads very well the 'old', but doesn't recognize not new.  I try to use a portable hard drive, Verbatim 500 GB and a 4 GB flash drive Imation.  I use two devices in my netbook computer but not my office.  It says it can not find or install the drivers.  Ideas please, it's driving me crazy.

  Hi Marilyn_29,

  1. did you of recent changes to the computer?

  Method 1:

  You can try to start the fixit USB and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 1:

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and then press ENTER.

  (b) in Device Manager, expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.

• Can not install and configure USB DVB - T

  I just bought a tuner TV USB DVB - T (PX1211E-1TVD) and I can't make it work on my PC.
  I tried it on my desktop and laptop (Windows XP x 64), and both give the error "cannot install this hardware". I tried on an old laptop running an older version of Win XP and it worked fine, so I'm sure that's not the material.
  So, does that mean it does not work with 64-bit windows or modern equipment?
  Can someone please point me to a working driver that my research were unsuccessful.
  (If it is not a driver that works with modern computers why is this device sold yet?)

  As I bought this correspondence, a full refund will be a pain, so I am hopeing that there a driver out there somewhere.

  Hello

  I found that the drivers for Win XP (32-bit) and W2k
  Usually if someone buys a new device, then first you must check if the device works on the computer and if this OS is compatible with the external unit.
  According to your message the tuner works on other phones. That is why it s not a problem tuner but maybe with your operating system.

  I put t know if it of possible but maybe you can try to simulate a Win 32 bit environment.

• ScanJet g4010: do not install scanjet following usb and usb-hardware driver issue?

  Hello

  I tried to install the scan of a brand new computer and encountered the following problem:

  I downloaded the package of appropriate software (full software and driver) from HP Web site, I start to install and get a message after the first stage (verification of the system requirements). the specific question that the system doesn't have the support of USB-required to complete software installation USB + same question regarding the USB hardware...

  strange because it is a whole new system, and none of the other USB devices have no problem at all... (this happens even without/before plug in the device to scan..)

  I also made an update of the Bios and checked if all USB ports are active and enabled in the Bios, no problem...

  System = dell optiplex 5040, windows 7 Professional 64 bit

  any ideas?

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• Portege M800: webcam does not work with Win 7 64 bit - webcam driver open failed

  Hey guys

  just got my companion to upgrade me for win 7 64 bit.
  Now, my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?

  "driver open webcam fail. Please restart camera or computer.

  See you soon

  Hello

  Seems that you used the wrong webcam software/driver or is not compatible
  You must use a webcam Chicony Win 7 64 bit software.

  > Now my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?
  The Portégé M800 Win 7 drivers are available on the European driver Toshiba page.
  You will also find the driver of Webcam Win 7 64 bit 1.7.260.0526

  Please remove first the old driver, and then restart the unit clean to the BONE using CCLeaner, reboot the device again and then install Chicony webcam software.

  Welcome them

• My computer has been recognizing not my two printers. He says that the printer spooler was not working. So I uninstalled my printer and when I tried to reinstall I received a message that the RPC server is unavailable.

  My computer has been recognizing not my two printers (which I have had for years).  The message says that the "spools of printer was not working" when I tried to print.  So I uninstalled my two printers and tried to re - install.
  Then I get a message that the "the RPC server is unavailable".

  Hello Sue Strong,.

  Thank you for your message.  Let's try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.

  Click the (+) sign next to "Services and Applications" > select 'Services '.

  On the right, find and right-click "RPC Remote Procedure Call ()" > select "Properties".

  Select the "Recovery" tab, then successively in first failure, second failure, etc. "restart the Service"

  Validate the change OK
  Stay in the services menu.
  On the right, find and click on "Print Spooler" > select "Properties".
  Click on the 'Start' button and check the "Startup type" is set to "Automatic" and click OK.
  If these steps resolve the problem, click HERE for more information and troubleshooting techniques.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A-C50-1DN - Control Centre of Nvidia's Win7 can not find material

  Hello

  I changed the Win8 to Win7 and everything works fine.

  But I can't get the graphics card from Nvidia to run. I downloaded the driver from the Toshiba page and I can install it without any problem.

  But if I start the Nvidia control center, it tells me that it cannot find any Nvidia hardware.

  The windows Device Manager tells me that the driver of a 3D-Videocontroller is missing.
  But win7 can not install it automatically.

  Can someone help me solve this problem?

  Best regards
  Olum

  > But I can't get the graphics card from Nvidia to run

  Sorry mate but I put t understand it. You said that the nVidia display driver might be installed correctly without any error message.
  You can what entries see in device-> graphics card Manager

  The laptop supports the NVIDIA® GeForce® GT740M w / Optimus (this is an external chip). The device supports also the internal Intel HD Graphics 4000 (this GPU Intel is part of the processor Intel CORE I3 - 3110M)
  The two cards (nVidia and Intel GPU) must be listed in the Device Manager.

• Windows Vista updates will not install

  When my computer restarts, it starts to install updates and did not finish.  Then comes the reboot of the system to solve problems.  Keeps trying to update and restart every time the computer is restarted.  Windows Vista.  Automatic updates was turned off

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can not install updates KB973593, KB973704, kb974561, KB975960 I get the error code 646 #! In addition, Microsoft IATAP adapter #5 ROOT\ * ISATAP\0007; #7\0008; 9\0011 # device does not not impossible to load the required driver.

  The program that I have problems with, install my updates, they moved it and I get an error code 646 #. I tried to fallow the guide to fixing the problems to solve the problem though, everything I've read and tried did not work! I have plenty of room for my memory and now I'm stuck! In addition, my adapter from microsoft IATAP #5 Root\ ISATAP\0007; Microsoft IATAP adapter #7 Root\ISATAP\0008 and IATAP microsoft adapter 9 # 0011 Root\ISATAP\ these 3 devices not working properly because windows cannot load the driver for this device, and I don't have a clue on what and how to solve this problem at all. "Were the changes that I made, I started using Mozilla Firefox 3.5.3 for my internet conection and I installed two programs (1) speed of Uniblue SN 2009 and (2) Uniblue Registry Booster 2010 both programs are by Uniblue Systems. CTA Neather program worked as they said that if I uninstslled them and after that there about 2 weeks later I noticed that my updates of the program did not work. , or if these device IATAP drivers worked! I tried the system repair and recovery, which also does not solve the problem. I have a Toshiba Satellite A215 laptop 2.00 GB and my OS is; Microsoft Windows Vista Home Premium, Patch level; Service Pack 2. I'd appreciate any help to fix these problems that I'm having with these programs and drivers, I know just enough about computers to really screw things. Please I need a step by step instruction.

  Thank you

  Keith

  I had to disable the "User Account Control" (UAC), which allows you to run as administrator in Vista.  After that I turned it off, all 4 of these updates installed and it doesn't require manual installation.   Follow these steps:

  In the case of Vista view:

  1.) go to start; Control Panel; "User accounts and family safety"; User accounts.
  2.) click on 'Enable user account control or disable' (last point on the page)
  3.) clear the checkbox "Use User Account Control (UAC) to help protect your computer" and click "OK."
  4.) restart the computer, and then run the installation of the system and they work.

  If you are in Classic view:

  1.) go to start; Control Panel; Security Center
  2 screen.) in the "Windows Security Center", go to the last item "User Account Control" and click the button to turn off.

  You can also see the security shield in your Start menu.  You can also access the UAC via this.

  After that the installation of the system have been updated, make sure that you go back and turn the UAC "" and then restart your computer so that unauthorized updates do not occur.   Always try this turn off if install doesn't work.

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• keeps trying to install the Vista upgrade

  Vista is installing the upgrade (kb955430). I can't get him to stop. When reboot it says installation upgrade 1 1, do not turn the computer, but I have to pull out the plug that he keeps trying to do something. hard disk activity is high all the time. Whem I restart after having pulled the plug it is said: configuration installation 1.3 and then he returned to the usable state, but always with very high diskactivity, try to install the upgrade. The pc is very slow because of it. try to uninstall updates it tells me that it cannot do as the facilities program is busy.

  Hello Peterkragh,

  Thanks for posting on the Community Forums of Microsoft Vista.

  First try to restore system to a previous date when the computer was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about system restore.
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx

  Later, download the standalone version of Ko 955430 on your desktop from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b1746a64-2bb5-4058-B133-d8264a0122cb&displaylang=en

  Once the download is complete, start the computer in safe mode and try to install the update in safe mode. Once the installation is complete, try to boot into normal mode and check if everything works well.

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 Professional does not start upward when adding a 2nd hard drive is stuck on the windows logo

  I try to add a 2nd hard disk - a disk seagate 1.5 to - win7 will not start - stuck - up when I connect the drive.

  I have another drive, a 160g WD drive - it starts ok w / that a connected.

  Why is it ok w WD drive / 160g of starter, he recognize etc ok but won't start w/1.5 tb seagate drive?

  both are sata drives - connected to the same sata port when I try of their

  "richiedude4444" wrote in message News: * e-mail address is removed from the privacy * .com...

  Nevermind - I found it for my # model/serial

  fact firmware uupdate and still win7 crashes at startup looks like I got a new seagate brick.

  As it is a new drive and is under warranty, contact Seagate for replacement.  Any company can send a piece of equipment DOA.

• Satellite A500D - FN key does not - need tool for Vista 64-bit

  Hi experts,

  I would like to ask for help on the problem of my laptop.
  The FN key is not working now. I tried to restart the Flash cards, but nothing happens.
  I read on a few discussions that I must download the VAP and drivers section flashing utility.

  That is, that there is no option for vista 64 on the list. I have the European backup installation discs (CD 7 or 9?) but I do not intend to reinstall new OS.
  I can not activate the button for the antenna, because it requires the combination FN + F8.

  Any help is appreciated.

  Thank you

  Hello

  It seems that there are only some a lot of drivers for Vista 64 bit for Satellite A500D not published on the page of the European driver Toshiba
  This is why I would recommend checking the VAP (value added package) and card Support Flash Utility released for a series of Satellite A500.

  In fact, utility Support Flash Cards for Vista 64-bit is a 1.63.0.3C v
  http://Support1.toshiba-tro.de/Tedd-files2/0/FcSU-20090903093947.zip

  Value added package v1.2.8
  http://Support1.toshiba-tro.de/Tedd-files2/0/VAP-20090903094710.zip

  Hope this helps!

• Update keeps trying to install a former printer driver

  I got a HP J6400 printer and now I have a new HP J6500 printer. Install the continuous update of trying to update the J6400 printer drivers. How can I remove this update all the time? I removed all the programs the J6400 printer but it keeps trying to install print "updated" drivers for this printer.

  Hide the update. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft