WIN8 USB to connect to the port series

Similar Questions

• Connection connection to the port series of comments on the application, the host

  I'm working on a project using Workstation 7.1.3 build-324285.  The application is a system running Windows XP as a guest.  The application has a CLI (Command Line Interface) hardcoded to use COM1.  I can reach COM1 by attaching a USB to adapter series and connection to the host and using a form of closure and an another USB adapter to series return to the homepage or another machine, where a terminal like PuTTY program is used to configure the embedded system.  However, I would use something like a named pipe to connect directly from Putty to Com 1 in the prompt without leaving a real interface series.  Is this possible?

  I created a serial port in the settings menu of the virtual machine and which mapped to a channel named (//./pipe/com_1) and which can reach in Putty, but of course this works if the guest OS is in debugging and is not my app on COM1.

  Thank you for your ideas and experiences!

  Thank you

  James

  First, you must remove the prompt thinprint - it uses COM1 if it is active.
  See my notes here
  http://sanbarrow.com/VMX/VMX-serial-ports.html

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• connecting to the port Series 9 pins

  I have Vista Business. I use a scanner that uses a serial connection. He has always worked in XP and I couldn't use hyoperterminal 0 test the. Now, there is no test for the port. I can't get the data via the port and I'm not familiar with telnet or knowledge if we can test the port. My port may be blocked? I truned disable the firewall and no luck. I place the receiver program as a program exception in the firewall, but the digitizer is what sends the data to the port not the software on the system.

  Any ideas?

  Hello Frank Gregg,.

  ·         The digitizer is displayed in Device Manager when you connect?

  ·         You have the drivers installed for the scanner?

  ·         Who is the manufacturer of your scanner?

  ·         What exactly are you using the digitizer for?

  ·         What is the name of the program that you use to perform the test?

  I suggest you contact the manufacturer for the digitizer get the drivers to connect with Vista.

  If the device shows working in Device Manager then you can try to perform the test for the ports.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• SD Bluetooth 2 and not able to connect to the port series on pocket PC

  Software Bluetooth version 4.01 OS Pocketpc 2002

  Everything works well, you can see the discovered device, but the status is ´not connected´ from the following Web page, it is possible to connect; http://www.TomTom.com/support/index.PHP?language=5&query=Toshiba&FID=334

  but this option is not available, no idea how to get connected GPS!

  Dnloaded and tried version 1.0, but the sd card is not valid

  Thank you very much.

  Hello

  What Toshiba PocketPc do you have?

• My anterna wireless usb was connected to the exnention of 3 m line. What is a problom to the anterna

  My anterna wireless usb was connected to the exnention of 3 m line. What is a problom to the anterna

  Hello

  I suggest you to give us more information about the issue so that we can help you better:

  http://support.Microsoft.com/kb/555375

  It will be useful.

• Internet - unable to connect to the proxy serer connection issues

  I have two problems, which could well be related.  Equipped with Vista.  Firefox running, all of a sudden a site using java wouldn't work.  I tried the automatic installation of Java, it has failed.  I tried the manual installation and said "Setup cannot continue with the current internet connection settings" (which is not one of the error messages shown on the help that is aimed at page).

  I decided to try to do it through IE.  It is not connect to the web at all (not Opera).  When I tried the link diagnose, I think once it says "unable to connect to the proxy server" well this time he said www.google.com is not set up to establish a connection on the port world wide web (http) service on this computer.

  Can you help me with, or ideally for both - if they are not conneccted - problem.  Thank you.

  Hello
  Let me assure you that I am on the same page here.
  1. you can get online via Firefox, but not with any other browser?
  What happens if you try to connect without a browser... just use the connection to connect before you open a browser?
  Was there anything added/removed before it began?
  Have you run an anti-virus and anti-malware scans?

  Also try:
  http://support.Microsoft.com/kb/937151
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-proxy-settings-in-Internet-Explorer
  hope this helps,
  B Eddie

• [nQSError: 12008] unable to connect to the port 9706 on machine

  OBIEE 11.1.1.6.7 worked very well. I just re-uploaded repository after making a few changes as user/password and of connection name string. After that, I started again all services and now I am getting following error:

  OBIEE@OBIEEUAT bin] $. / opmnctl startall
  opmnctl startall: from opmn and managed all process...
  ================================================================================
  opmn id = OBIEEUAT:9501
  Answer: 0 on 1 process started.

  IAS = instance1 instance ID
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  --------------------------------------------------------------------------------
  IAS-component/process-type/process-set:
  coreapplication_obis1/OracleBIServerComponent/coreapplication_obis1 /.

  Error
  -> Process (index = 1, uid = 471344379, pid = 12829)
  Cannot start a process managed after the attempt limit maximum
  Journal:
  /OBIEE/Oracle/middleware/instances/Instance1/Diagnostics/logs/OracleBIServerComponent/coreapplication_obis1/console~coreapplication_obis1~1.log

  [2014 02-10 T 21: 39:46.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.connectionPool.getConnection] [ecid:] [tid:] connection to the Oracle BI server error: could not connect to the Oracle BI server because it is not running or is inaccessible. Please contact your system administrator.

  ODBC driver returned an error (SQLDriverConnectW).

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred.

  [nQSError: 12002] Communication to the socket call = Connect error: (number = 107) Transport endpoint is not connected

  [nQSError: 12010] Communication connection to the remote end point error: address = OBIEEUAT; port = 9706.

  [nQSError: 12008] Unable to connect to the port 9706 on machine OBIEEUAT. (HY000) [[

  Leader: Connection.cpp

  Online: 413

  Geographical area:

  1. saw.connectionPool.getConnection
  2. Saw.Security.odbcuserpopulationimpl.getbisystemconnection
  3. Saw.Security.odbcuserpopulationimpl.searchidentities
  4. Saw.Security.userpopulationmanagerimpl.getaccountdetailsbyid
  5. Saw.Security.handleguids
  6. Saw.Catalog.aclsearchhandler.handleacliniteminfo
  7. Saw.Catalog.scrubacls.Scrub
  8. Saw.Security.securityimpl.Initialize
  9. saw.catalog.local.loadCatalog
  10. Saw.Subsystems.catalogbootstrapper.loadcatalog
  11. Saw.webextensionbase.init
  12. Saw.sawserver

  ECID:

  ]]

  Any idea to solve this problem?

  Note: Earlier it was working fine. I got this error after downloading update of RPD

  Concerning

  Park

  There was problem RPD username/password so I downloaded the RPD with correct password again. Now it works like a charm

• My mobile mouse 3000 does not work even with new battery, no green light on USB, when connect to the system, it says unknow device USB

  the system says: one of the USB connected to the computer with multifunctioned, and windows does not recognize it.

  Hello

  · What is you receive the exact error message?

  Follow the steps in the links below and check if this can help: Troubleshoot failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Troubleshoot the failure to find new mouse connected to your USB port: http://support.microsoft.com/kb/223256

• failed to install for photosmart b109 all-in-one a - m. has said usb not connected to the computer

  I replaced Vista with a new version of windows 7 64-bit and cannot get my HP Photosmart B109 all-in-one a - m at the end of the installation I downloaded from the HP site. I uninstalled this printer as suggested before attempting the download. He gets to the part where you plug in the power and then the lights on the printer the computer tells me that my USB key is not plugged into it. I tried changing USB website and tested the USB connections and ensure that they work on the computer, but still the same response. The program then continues to stay on the installation of the final software and never complete. Talked with a local tech guy who suggested that you contact because he has no idea.

  Hi, thanks for the suggestion. However, I did not upgrade but remove vista altogether. I found the problem after a lot of grief and research - there was a cord that had fallen on the back of the library that was not plugged in!

• OfficeJet 6500 E710n-z: where to locate X 86 Drivers for Win 7 to print Via USB system connected to the network using Win 8.1

  Since my computer can only connect to a printer wireless via USB, other computers on the network cannot connect to the printer.  The possibility of allowing other printers using the main system of sharing, I need the x 86 driver but cannot locate it on the HP support.

  Seems there are a lot of problems installing with HP systems, I would hope that society can give a high priority to these issues.  Many of us love quality HP but wireless connectivity is frustrating.

  In a humorous way, please remove the "cannot find the printer - make sure that the printer is plugged in and turned on."  statement.  Our children know how to set up a network, so that the statement is hilarious, until you see for the 20th time as possible motive to the wireless printer is not found on the network.

  Hello
  My post seemed to have grown to a case manager who was willing to put up a time for the members of technical support to contact me.  By the way, she asked about the distance, the printer from the router, which, by other reviewers, should be placed next to the printer, and she asked for me to try to move the router to about 18 inches from the printer so that it would be responsible for coordinating the call of support following our conversation.

  I did it and all network issues related to wireless access by the entire Office has been resolved and performing network and each station can print and scan in a few minutes, following a job application.  Printing took about 20 minutes to start and sweep was impossible until this Council been offered.

  Many congratulations to Yvonne!  And, I thank you for following up on this post.  I am a very satisfied customer again once my application has been met with personal concern for the issue and an appropriate resolution and FANTASTIC found!

  Thank you once again,

  Rick

• I use a dongle for my internet but suddenly I can't connect. "" When I run windows diagnostics I get this message "not set up to establish a connection on the port.

  Internet connection problem

  I use a dongle for my internet but suddenly I can't connect. When I run windows Diagnostics I get this message... "www.microsoft.com"is not configured to establish a connection on port "service world wide web (HTTP)" with this computer. Can anyone help please?

  Hello

  (1) don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3: Of connection problems in Windows wireless and wired network:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this information is useful.

• X 301 has no sound when connected to the port replicator

  Hello

  We have a x 301 with a port replicator 45 k model 2777-cto 1610.

  We first had the problem with the blue screen and not SA of lenovo or IBM might help. I found the solution here.

  No, I have a new problem. When the port replicator is connected, there is no sound on the computer? Once the port replicator is unplugged, the sound works well?

  Any ideas or advice will be appreciated.

  Eugene

  When you connect to the rep of the port, the audio should be routed to the audio port on the default port rep, not your system. There should be a setting via icon taskbar for rep port driver that returns the audio to make of her.

• connect with the windows computer using usb after connecting to the wireless mac

  Printer HP Photosmart 7520 connected wireless to the new iMac using Fios router wireless.

  Can I connect the printer even to an old Windows computer (running XP) via USB without interfering with the connection Wireless for Mac?

  Hi Rekjek,

  On both wireless and USB is allowed. There should not be all the problems between the Mac and the PC using the same printer.

• remove the ports series and parallel

  Hello

  I wonder what that "sport erial and parallel can then be removed" in all these articles on the new vSphere 6 functions is all about. I couldn't remove these VMs ports before, couldn't I? Nobody seems to get into the details, everyone just copies / repeat the same thing on the other.

  Best regards

  Jan

  Versions previous hardware could always hardware ports series and parallel within the virtual of the motherboard SuperIO chip, even when there are no virtual serial ports or virtual parallel ports configured for the virtual machine - quietly ports would be "present but disconnected", so they would use more space i/o and IRQ, and always appear to be present in the list of devices in your guest OS IRQ and I/O port map.

  With the latest version of the material, if you delete the port virtual series and virtual parallel port, they will be missing... the guest OS won't see all the device, and it consumes no space port of IO and no IRQ.

  I hope this helps!

  --

  Darius