Win98 to conversion of win7

Similar Questions

• Assistant device communicating with pressure gauge, but still get error 1073807246 after conversion of Win7

  I have a simple .vi I used last year to connect with a manometer. There is no pressure journal and intrigue over time. Our computers just got converted to Windows 7, and now I can't get the .vi to work. I can go in the wizard of the Instrument and send a command to the gauge and the gauge will react appropriately. But, when I run the program, didn't get any pressure on my face or in my log file information.

  I searched the error code and tried several things including http://www.ni.com/support/labview/visa/verr3.htm. I'm guessing it's a simple solution, I don't know what it is. Help a newbie!

  Are you absolutely sure that you have closed all other programs that may access the port? Having MAX open with a panel of test VISA or an older version of LabVIEW would cause the error.

• WINDOWS 2003 SERVER PING OF SUPERELEVATION FOR WIN 7

  Hello

  Our ofiice network AD WIN 2003 server, we blended customer win7 and winxp envirment. Only XP clients are ping on the server (win2003 to XP) Conversely, however Win7 can ping to the server, but the server can not ping to win 7. Please advice asap.

  Thank you

  Feroz

  Hello

  Our ofiice network AD WIN 2003 server, we blended customer win7 and winxp envirment. Only XP clients are ping on the server (win2003 to XP) Conversely, however Win7 can ping to the server, but the server can not ping to win 7. Please advice asap.

  Thank you

  Feroz

  You must enable the firewall icmp echo requests... http://www.pcandtablet.com/Windows-7-antivirus-and-security/228/how-to-unblock-ICMP-echo-requests-from-Windows-Firewall.html

  If not to burn down the House to kill the rat... turn off the firewall in windows 7... (which is not recommended)

• How to install usb drive external hard disk in hpe-410f

  I booted up and logged samsung usb drive external floppy (SFD-321U) and windows did not find driver on the computer or to the internet or after google-ing substantial. I use windows 7 professional 64 bit. the floppy drive worked ok when I was with my old computer (Win XP) who died after 7 years of.  All hope for the installation of the floppy drive on my desktop win 7?

  The author of the driver package has since removed the files. It has been mentioned only in 2011.

  The Samsung drive is to Win98/XP. No Win7 drivers.

  The drive I linked is the current technology. It is supported by WIN7.

• Dim dark screen on T60p after convert for Win 7

  I had to wipe Vista and do a clean install of the released version of Win7. Since then, my screen is not coming back to the same brightness I had before with Vista. The Fn brightness up/down controls work, but just take the dim Dim screen REALLY.

  I have all the latest Lenovo's BIOS updates and Windows updates. I have drilled down in the control panel to the gamma settings. I can make adjustments here, but all variations made worse rather than better.

  Since the conversion of Win7, I lost the utiities ATI Catalyst. I tried to install http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=WIN7-BETA#m8xdiscret... ATI drivers. The article says, it installs successfully, but there is nothing in the start menu, nothing loaded to the system tray, nothing else, no improvement.

  It kills me. I am a photographer, this machine is my digital darkroom and I have to teach a course in photo tomorrow, and my photos all look at them as they come from the inside of a coal, mine. Any suggestions?

  Have you tried to install the Vista driver from Lenovo site? It worked well on my (at the time) T60p... under W7 RC1...

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-66884

• Conversion of win8 to win7

  I recently bought a laptop powerful with win8.

  Managed to do play demanding game F1 2010.

  Unfortunately the game seems not to be compatible with win8 even after installing the patch, who promised to solve this problem.

  Is decommissioning of the system, the only way or is there a compatible mode in win8 which allows to run games?

  Hello

  See if this helps you:

  "Make the programs more compatible with this version of Windows.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  See you soon.

• Vista/Win7/language to XP fonts

  I know that xp is no longer supported, but there is still a lot of people who still use XP.  Specially 3rd country in the world.

  Since the arrival of Vista, the many languages of countries have been added.  In any case, we can use the Vista or Win7 for XP? Conversion without using third-party software?  Make this country appear not to be included in the language list.  Could the consumer end user add or modify one for Windows?  Example, I can choose listed Thai language and change the font and make type Indian language?  That is what MSKLC (creator of the language keyboard) is for?

  Hi TekWannaB,

  Unfortunately, it is not possible to transfer languages of Vista or Windows 7 for XP.

  Please see the list of languages offered by XP. List of languages supported in Windows 2000, Windows XP and Windows Server 2003:http://support.microsoft.com/kb/292246

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DualBOOT WinXP and Win98

  I tried to do for about 2 weeks, market and trying to get Windows 98SE & Windows XP dualboot correctly. I had success but am still not satisfied. Here's what I tried.

  1st attempt:
  -Essentially have a base with 2 primary partitions drive - a (Win98) one FAT32 NTFS (Windows XP). First, I installed Windows 98 on C: (FAT32), then installed Windows XP later on D: (WinXP). It was all great job for awhile and after some time I suddenly wasn't able to boot in Windows 98. Something had changed during the installation of programs over several days, so I restarted from scratch once again.

  2nd attempt:
  -Basic disk I had on a set of primary partition of 500 MB to active for just Boot (C: FAT32), about 1/3 of a primary partition for Windows 98 (E: FAT32) and about 2/3 of a primary partition for Windows XP (NTFS D :). Of course, I installed on the disks appropriate using C to boot to XP system files and 98. Installed XP first on D: and 2nd Win98 on E: - then I could only start XP again and Windows 98 was not able boot upward as he wanted to BE D: drive because Win98 is unable to see NTFS partition and think that there was nothing there so my boot.ini file were conflicts with that.

  3rd ATTEMPT (successful):
  After frustration, pulling on my hair and such things, I said screw it. I did an active primary partition (2/3 c: FAT32) and a 2nd primary partition (1/3 d: FAT32). So I installed Windows XP on C: first and Win98 on D: - it's all good and dandy except... I want my XP in NTFS security!

  AN IDEA: So right now, I say to myself, screw the partitions, equip a 2nd hard drive (primary slave / primary master). Master on XP NTFS, slave on 98 FAT32 - both primary partitions and can be active (or not?). But now I wonder if even that will work as loads off C: the boot for WinXP/98, and Windows 98 is an atheist, when it comes to NTFS partitions - they simply do not exist.

  ANOTHER IDEA: Find a decent boot loader. I've heard a lot of GRUB, but I wonder if this is the way to go because it seems that GRUB is used mainly for Linux/Unix dualboots.

  Here's WHAT I WANT: I want a WinXP NTFS (for security reasons) and a Win98 FAT32 work. Usually my Windows XP is about 2/3 of the space system and Windows 98 is of about 1/3 the space system.

  For all partitions to dualboot I use a 60 GB so you do the math. I have a spare 40 GB I thought put in Windows 98 separate conflict still further, but for some reason any after my failures, that it doesn't seem like I'm going to avoid conflicts...

  WHY THE TROUBLE? : you can ask - I just want to be able to play old games on Windows 98 with DX8.1 and have a working system of XP for all newer games (which are still old...) - in other words to benostalgic.

  Other questions on the installation made me know.

  PS Wait I will post everything trying to launch BITLOCKER partition Win7 with Bootcamp on my Macbook Pro. This one will be even more interesting...

  Get Ranish Partition Manager and install sound code MBR bootmanager.

  Then, at the prompt "boot HD...", press 1 or 2 to select the boot partition.

  No need to make entries special boot.ini, as boot partitions quite separately from this way.

  Also works for Linux, install LILO/Grub in the boot sector of partition, NOT the MBR, and once again you just press the partition number to select.

  http://www.Ranish.com/part/

  "P.S. wait until I post about trying to run BITLOCKER on partition Win7 with Bootcamp on my Macbook Pro." This one will be even more interesting... »

  Don't call us... I don't know that forum Mac Help well. (Just don't tell them we said that!)

• Low/low audio record from sources online w/Sound Recorder (Win7)

  Greetings,

  I tried to record audio (music) from sources online by using Sound Recorder in Win7, but the recording level is very low.  I'm not sure if it's a card problem his (chip Conexant HD Audio version 8.50.0) or there are one or more settings in Windows, I missed.

  Tab 'Registration' under 'Sound', 'Stereo Mix' is selected under 'Stereo Mix properties' and 'Levels' Stereo Mix 'Advanced' 100%...under, I chose "2 channels, 24 bit, 48000 Hz" and the two boxes checked under "exclusive Mode".  Everything I need to look?

  Any help is appreciated!

  In windows sound recorder is pretty bad, the limits are endless.

  For great audio/video recording & convertor, download Windows Media Encoder 9 series.

  Microsoft does not offer the encoder, but its public services can be made through the Download Center, use you're looking

  Engine Internet of the encoder, the best bet is http://www.msn.com

  The encoder is just as good as it gets, in addition to recording/encoding/conversion is unlimited, youre HD

  availability of storage is his limit...

  Once installed, windows update will be updates to the encoder...

• Failed installation of Bluetooth after conversion from 32 bit to 64 bit

  Recently, I converted my laptop ACER from 32-bit to 64-bit. Since then, I am unable to install bluetoothdrivers on my system and both 32 & 64-bit versions of the Installer failed, both the performance of the installation with "your system is not compatible for this product.  Kindly let me know if any solution for this.

  The product details are as under:

  OS Windows 7 Ultimate (32 bit to 64 bit conversion).

  ASPIRE E1 - 531

  6 GB OF RAM

  320 GB HD

  You cannot convert a version of bit of victory, it requires a clean installation of the specific bits version of victory.

  All system drivers would be obtained from Acer support.

  If you get a "msg is not compatible" when you install the correct version driver of ILO, either you are using the wrong driver got on the wrong site or there is a problem with your installation of win.

  I just clean installed win7 64-bit on the same laptop model, and got drivers from Acer support, everything went without a hitch - other hours of updates to windows that followed.

  (Remember there are 3 or 4 different Bluetooth drivers on Acer support)

• I need a MS-DOS 6.22, win98 or ME full commercial version with product key, no upgrade.

  microsoft please I need to buy a product BACK, I hope that something with (or can genrerate) a boot floppy disk 3.5 "can be used. I would also appreciate it if the cdrom might be available to me for the same license key.

  How much would it cost for several copies?

  I need it to run some current software.

  If it is not available, can make you it available again? There is a market of about 65,000 + people who will probably buy it just to use spinrite alone.

  in fact, why not get a version of MS-DOS compatible UEFI? BACK community in need. people then probably move to the plate and the program for her. achieve a compiler to it and sell it and offering him. one of the uses is embedded, and there are a good number of these people out there.

  I would also buy a windows 3.1. I prefer the cdrom, but will have floppy disks 3.5 ".

  I need to know the cost, a URL, or how to order and no - contact at what phone number or what Department to ask.

  I would like to run in a virtual machine, or whatever. I can buy several copies according to the price.

  Please sell these for me and others. then make available on the microsoft web site. Thank you.

  It is also essential for me as a developer to have XP Mode available for windows 8.1 and later versions of windows because it has command.com, and that it doesn't crash not everywhere. I also need to have windows 7 have the ability to mount the VHDs from different formats, as of vhd and vhdx and so on. I can't do the work of development without the ability to share some common between the virtual machine data and windows 7 or any operating system. am currently using win7 pro and VirtualPC. but XP mode should be made available on hyper-V, and the license must be such that it is not limited to 1 session / computer, now that XP is set by the wayside. I need to get the work done.

  multitasking or task UEFI active BACK-switching would be support pleasant and current printer, at least to make print screens and make it work with usb printers and readers, TCP/IP, etc..

  and it doesn't have to be only text 80 x 25. I think 200 x 120 or more now that we have screens HD and you can do some stuff with that on really cool disk management programs or it could be divided into text boxes.

  provide the mouse support. to provide a graphical interface.

  but it must be instantaneous. It must be such that no disk caching is installed unless the user wants, so if the user wants the box turned off, they can just do it and it's safe, like the BACK.

  and he needs a fixer of filesystem and fixer of bad block, such as chkdsk /f /r and chkdsk /f.

  FAT32 FAT64/exFAT would be a nice additional fiesystem to be included.

  include a web browser, ftp, and telnet client and a TCP/IP stack that works with IPV4 and IPV6. publish the API. put at the disposal of the kit development software TCP/IP or something.

  This single OS might be a BONE can be used only for the hosting of the disc utilities (on CDROM or otherwise).

  It should be easy to make a bootable CD-ROM image. make some sort of kit or instructions and the utilities available to extract the boot sector, etc.;.

  and * please * remove the limitations of file system relative to an old bug off FAT32 since the current versions of windows. FAT32 can do 8TiB or better, but an old win98 bug that didn't get fixed limited * all * associated with FAT32 format to 32GiB and it's not fair.

  Please correct.

  and * please * do windows XP mode and windows XP and different versions of the windows files and printers sharing work between them. It's maddening. We have a windows 3.1 machine, PC - BACK 2000, windows 7, windows XP 2 different flavors. and I have a 8 upgrade windows. Maybe microsoft should standardize on NFS or SMB and stick to it.

  You can buy on eBay and DOS/Windows 3.1 come cheap...

  http://www.eBay.ca/Sch/i.html?_trksid=p2050601.M570.L1313.TR5.TRC2.A0.H0.XDOS+6.22&_nkw=DOS+6.22&_sacat=0&_FROM=R40

  Re Microsoft to solve problems in Win 9 x, it will not happen even if there are still users 65000.

  It escaped you, but Microsoft cut XP (and all the time too). XP mode will never appear in any Microsoft OS after Windows 7.

  Note also that this is a forum for Microsoft, solutions to problems running in Windows 7 and is kept going volunteers et al. It is not a sales office for the obsolete operating systems.

• resource of Microsoft to Explorer conversion coff file utility funcionar dejo

  En Español:
  Al iniciar e Asus U40s Win7 premium 64 the following error appears:
  "Microsoft to coff Explorer conversion resource file utility funcionar dejo" appears the opcion para el programa close y al hacerlo el fondo desktop is trona blanco, no respond a travez del solucionador problemas del encuentro, y tampoco puedo restore el equipo a previous an estado porque no tenia activada esta opcion y no any punto Restauración stored hay. Porfavor Ayuda.

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace: (sp)

• I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How do I rename them.

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...

  Maybe this old conversation will help you:
   http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html

• Significant RAF files in LR CC with simultaneous conversion to DNG problem

  In LR, I like the CC this bug:

  Last Sunday (26.06.2016), I imported some (Format RAW files of my Fujifilm X - E2) - RAF to LR with simultaneous conversation in DNG (I do this procedure for a long time). Shortly after the LR imort showed in the upper right of the preview of exclamation. A click on this issue showed the message, by reading this picture LR had a problem. The second last import of the RAF with DNG-conversation (4 weeks) works well. The conversation of CR2 files to DNG makes no problems al the time.

  The function "Test-files DNG" shows "Invalid format DNG-Files.

  In Photoshop I CC can´t open this DNG files too.

  At the same time (May / June 2016) I imported a large number of files (from my Canon EOS 60 d) CR2 with DNG-Conversation and no problem occurred.

  Versions:

  LR CC 2015.6 [1078672], CameraRAW 9.6; E2-firmware Fujifilm X: 4.00; Graphics card GeForce GTS 250/PCIe/SSE2, 341.95 driver Version; OS: Win7 Pro 64 bit.

  How to restore images to DNG files? Export is impossible!

  Please excuse my bad English, I'm German, I use a German Version LR and I re-translated messages program.

  This is the latest version of Adobe Camera RAW that's the problem. I also converted all my Fuji X - E2 RAF files to DNG and with version 6-2015/LR points 6 and PS and bridge with the update of ACR 9.6 none of them are visible.

  So, you have up to 2015 LR/6 - 5.1

  Look here for the steps, and instead to install the 2015/6 - 1.1 update installs the 5.1 update.

  How do I roll back to Lightroom 2015.1.1 or Lightroom 6.1.1? Lightroom Queen

• All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  I run FrameMaker unstructured 12 and FrameMaker 11 (for use with only the heritage project files) on a Win7 PC. The chapters in my FM11 file book for guide increment a new product user normally in FM11, but something bad, after you save the formatted FM 12 FM 11 project files.
  The book file includes:
  -Product Guide Cover.fm
  -Product GuideTOC.fm
  -Product GuideLOF.fm (list of Figures)
  -Product GuideLOT.fm (list of Tables)
  -Product GuideContent.fm (chapters 1-10) - book files dialing properties: Chapter 1 (digital)
  -Product GuideIX.fm (Index) (Chapter 11) - book files dialing properties: Chapter 2 (digital)
  
  Note: The chapter headings (e.g. 1 - Introduction, 2 - Specifications and so on) in the product GuideContent.fm and GuideIX.fm files are in the format paragraph Designer like: (the Auto-Numbering Format enabled) H: < n + > \t
  However, when I update the book, the Index seems formatted as Chapter 1 instead of Chapter 11. It seems that the conversion to FM 12 messed autodial in the product file GuideIX.fm, so that the only way to increment the value would be to manually update the building blocks in the file to H: IX.fm \t H: < n + > < n = 11 > \t (which I do not). Any suggestions would be greatly appreciated!

  Thank you - Randall basin

  Hi Ran,

  It's for anyone finding the subject, given that you and I come to chat with a screen sharing...

  After watching your files, the "chapter number" are really only section numbers, with all 10 of them in the same file FM. That means that really impossible to use the <$chapnum>for many of them and the index.

  In most cases, you would be still able to use the Fm 5.0 manually counting technique paragraphs title with an indicator of the series and the counter (e.g. H:), but you also have a number of positions within blocks of text not included in the stream.

  This seems to be your address update index position correctly.

  So, the only way to get the appropriate index number is to control it manually. You have at least 3 choices:

  1. Enter it manually
  2. Manually enter the AutoNumber box for the index
  3. Enter it manually in the numbering section of the dialing properties tab.

  However, all these things are extra bandages on top of your existing bandages, and I prefer to see the problems resolved instead of the 3 'Hacks' I have provided.

  For the sake of closure, please check the question if this seems to be specific for you.

  Sorry for the bad news (ish)!

  -Matt