Windows 2003 to cause migration ad 2003

I am trying to migrate my Active directory 2003 to 2008 r2 server and after you run the adprep/forestprep command

I tried to promote the 20008 to a domain controller, and it always says that I have to run the command .somehow forest that the server does not detect that the order has already been executed, the servers are in the same network and are accessible to the other

is there a solution to this?

Denzil

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

TechNet forums:

https://social.technet.Microsoft.com/forums/en-us/home

MSDN forums:

https://social.msdn.Microsoft.com/forums/en-us/home

See you soon.

Tags: Windows

Similar Questions

How to migrate Windows 2003 R2 to windows server 2012

I am tired of doing the Migration of Windows 2003 R2 to Windows server 2012, but there are some documents are only available in windows net Tech, I installed the migration on Source and destination server tools and its seat, but I don't know how to transfer roles from 2003 to 2012.

If a know the steps please please let me know.

Support is located in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

How to migrate from windows 2003 to windows 2008 with all the work of GPO active directory, DNS, without problem?

Hello...

I have a problem with windows 2003 to windows 2008 migration. I have try several round of flyway of google and youtube, but he is still fail.

in the first,.

I have HP Proliant server with windows server 2003. So I restore the backup to a different server HP Proliant wih same hardware specification. I've been back up the System State and the drive C with NTBackup. After I restored on HP Proliant, that I want to migrate, the DNS server is timeout request and the client cannot join domain. I was surprised, because the backup and the material is the same, but it can work as well as the original server.

in the second case,

I have windows server 2003 in HP Proliant server and it works well. I'm doing a replication on this server to another windows 2003 server in an another HP Proliant and works of good replication (another user can join the domain). After, I have installed windows server 2008 to another PC and make the replication of the duplication of windows 2003. And this success to replicate, but not on the DNS (DNS query time-out).

I have the despair to try migrating Windows 2003 and 2008 because he is still fail in DNS. Another way to migrate to Windows 2003 and 2008 with DNS, AD and GPO work?

Hello

The question you posted would be better suited to the TechNet forum where IT professional will deal with your question.

http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

Buongiorno,
Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e
Ricevo this error:
ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.
He problema e che no ho the possibility di līberō altro spazio.
Some suggestions?
Grazie in pre-empted.

Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

File acpi.sys caused an unexpected error Windows 2003 on the Linux host

Hello
I have VMware server 2 on a linux host that is fortunately supporting a windows 2003 server that was installed after the converting of a physical machine.
I am trying to install a second server Windwos 2003 CD as a new installation, after seting the machine the web UI I start and get:
Installation of Windows
============
File acpi.sys caused an unexpected error (32768) 6186 line in d:\srv03rtm\base\boot\setuo\setup.c
Press a key to contiune
I don't see what to do and a google and search the forums does not help.
Clues?

Hello

Check your installation CD.

Try to make this CD image and run your VM to ISO image installation.

J.

If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

Migration Forms 6i to windows 2003 and linux redhat 5 32-bit
Hello
Our forms6i (no EBS) application is running on windows 2003.
We would like to switch to Forms 11 g on linux redhat 5 32-bit.
Is that what this migration is supported?
Can help with the steps to migrate forms 6i to linux?
Thank you
Yoav,
Take a look at Oracle Forms modernization Oracle Forms 6i with Oracle Forms 11 g. This document gives you all the information you need to perform the upgrade. As for moving from Windows to Linux, Oracle Forms is practically independent of the platform, because almost all the major operating systems are supported server. Take a look at The Documentation Oracle Forms and specifically the Forms Services Deployment Guide and the guides of Oracle Fusion Middleware Installation Guide for Oracle Portal, forms, reports and discoverer .

Hope this helps,
Craig B-)

If someone useful or appropriate, please mark accordingly.

Need help in the migration of windows 2003 server Oracle database server 2012

Hello
My environment is oracle database 9i in windows server 2003, we want to move to Windows 2012 since the end of support for windows 2003.
Please give me a plan, what no need to make the first database upgrade or upgrade of windows, what are the things will have to be considered at the level of Oracle database?
Any help would be appreciated.
Thank you
Lherault

Hello

Given the version of your database is 9.2.0.8 and you want to upgrade to 11.2.0.4 and 9i database is running with log mode archive

I have plan.

(1) your database 9i working with the log mode archive Server 2003

(2) you can take backup of Database 9i with RMAN

(3) you can restore the backup to the base in 2008 (by using 11.2.0.4 software)

(4) when the recovery is complete, you can open the database with resetlogs option upgrade.

change the upgrade of open database resetlog.

(5) once the database is open, you can run 'Upgrade PROCESS'

(6) it should complete your upgrade in 2008

If you think, restoration and recovery will take time, so you can install physics Eve with 11.2.0.4 version in 2008 for the Database 9i.

During failover, you can recreate the controlfile and open the database ' change the upgrade of database open resetlog. "

you will need to check the compatibility with the help from under documents

Reference list Oracle database upgrade (Doc ID 730365.1)

Note 551141.1 : Server Upgrade/Downgrade Compatibility matrix data base

Upgrade of Windows 2003 to 2012 r2 DC replication problem

Hello

I added R2 2012 Windows server to windows 2003 sp2 (primary DC) DC and promotes as DC. After the promotion, I run dcdiag and it shows errors.

Each of the servers have three NICs connected to different networks.

Please help me with your expertise since I have to raise this Monday.

Thank you

Kind regards

Charaf-eddine

Here the dcdiag output new DC

Directory Server diagnosis

Perform the initial configuration:

Trying to find the server at home...

Home Server = CADPDC1

* Identified AD forest.
Made the initial collection of information.

Make the required initial tests

Test server: Default-First-Site-Name\CADPDC1

Commencement of the trial: connectivity

CADPDC1.engineer.com host name resolution error by

IPv6 stack.

WARNING: could not confirm the identity of this server in the

Directory and names returned by DNS servers. Host name

fixed error 0x2af9 "host is known."

......................... CADPDC1 passed test connectivity

Primary testing

Test server: Default-First-Site-Name\CADPDC1

Commencement of the trial: advertising

WARNING: DsGetDcName returned information for

\\cadpdc. Engineer.com, when we tried to reach CADPDC1.

SERVER IS NO ANSWER or IS NOT considered AS APPROPRIATE.

......................... CADPDC1 was not able to test advertising

Beginning of the test: FrsEvent

There are warning or error events in the last 24 hours after the

SYSVOL is shared. Don't not SYSVOL replication problems can cause

The Group of political problems.
......................... CADPDC1 test FrsEvent

Commencement of the trial: DFSREvent

......................... CADPDC1 test DFSREvent

Commencement of the trial: SysVolCheck

......................... CADPDC1 test SysVolCheck

Beginning of the test: KccEvent

......................... CADPDC1 test KccEvent

Beginning of the test: KnowsOfRoleHolders

[CADPDC] DsBindWithSpnEx() failed with the error-2146893022,

The name main target is incorrect...
ATTENTION: CADPDC is the owner of the schema, but does not meet the DS RPC

Bind.

[CADPDC] LDAP bind failed with error 8341,

A directory service error has occurred...
ATTENTION: CADPDC is the owner of the schema, but does not respond to LDAP

Bind.

ATTENTION: CADPDC is the owner of the domain, but does not meet the DS RPC

Bind.

ATTENTION: CADPDC is the owner of the domain, but does not respond to LDAP

Bind.

ATTENTION: CADPDC is the owner of PDC, but does not meet the DS RPC

Bind.

ATTENTION: CADPDC is the owner of PDC, but does not respond to the LDAP bind.

ATTENTION: CADPDC is the owner of RID, but does not meet the DS RPC

Bind.

ATTENTION: CADPDC is the owner of RID, but does not respond to the LDAP bind.

ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

meet DS RPC Bind.

ATTENTION: CADPDC is the owner of Infrastructure Update, but is not

respond to LDAP Bind.

......................... CADPDC1 failed test KnowsOfRoleHolders

Beginning of the test: MachineAccount

......................... CADPDC1 test MachineAccount

Beginning of the test: NCSecDesc

......................... CADPDC1 passed test NCSecDesc

Beginning of the test: NetLogons

Cannot connect in the NETLOGON share. (\\CADPDC1\netlogon)

[CADPDC1] An net use or LsaPolicy operation failed with error 67.

The network name was not found...

......................... CADPDC1 failed test NetLogons

Commencement of the trial: ObjectsReplicated

......................... CADPDC1 test ObjectsReplicated

From test: Replications

[Check the replications, CADPDC1] A recent replication attempt failed:

From CADPDC to CADPDC1

Naming context: DC = ForestDnsZones, DC = engineering, DC = com

The replication generated an error (-2146893022):

The name main target is invalid.

The failure occurred at 2014-06-27 17:05:59.

The last success occurred at 2014-06-27 17:01:21.

1 failures have occurred since the last success.

[Check the replications, CADPDC1] A recent replication attempt failed:

From CADPDC to CADPDC1

Naming context: DC = DomainDnsZones, DC = engineering, DC = com

The replication generated an error (-2146893022):

The name main target is invalid.

The failure occurred at 2014-06-27 17:05:59.

The last success occurred at 2014-06-27 17:01:21.

1 failures have occurred since the last success.

[Check the replications, CADPDC1] A recent replication attempt failed:

From CADPDC to CADPDC1

Naming context: CN = Schema, CN = Configuration, DC = engineering, DC = com

The replication generated an error (1727):

The remote procedure call failed and did not execute.

The failure occurred at 2014-06-27 17:05:59.

The last success occurred at 2014-06-27 17:01:06.

1 failures have occurred since the last success.

[Check the replications, CADPDC1] A recent replication attempt failed:

From CADPDC to CADPDC1

Naming context: CN = Configuration, DC = engineering, DC = com

The replication generated an error (-2146893022):

The name main target is invalid.

The failure occurred at 2014-06-27 17:05:59.

The last success occurred at 2014-06-27 17:01:07.

1 failures have occurred since the last success.

[Check the replications, CADPDC1] A recent replication attempt failed:

From CADPDC to CADPDC1

Naming context: DC = engineering, DC = com

The replication generated an error (-2146893022):

The name main target is invalid.

The failure occurred at 2014-06-27 17:05:59.

The last success occurred at 2014-06-27 17:01:21.

1 failures have occurred since the last success.

......................... CADPDC1 failure test replications

Beginning of the test: RidManager

......................... CADPDC1 failed test RidManager

Commencement of the trial: Services

......................... CADPDC1 test passed Services

Beginning of the test: SystemLog

A warning event occurred. Event ID: 0x000727A5

Generated time: 27/06/2014-17:01:38

The event string:

The WinRM service is not listening to the WS-Management requests.

A warning event occurred. Event ID: 0 x 80050004

Generated time: 27/06/2014-17:05:03

The event string:

HP 1 GB 2 332T adapter ports Ethernet: the network link is down. Check that the network cable is connected correctly.

A warning event occurred. Event ID: 0xA004001B

Generated time: 27/06/2014-17:05:06

The event string: HP NC112T PCIe Gigabit Server Adapter

An error event occurred. Event ID: 0 x 40000004

Generated time: 27/06/2014-17:05:39

The event string:

The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was LDAP/cadpdc.engineer.com/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

An error event occurred. Event ID: 0 x 40000004

Generated time: 27/06/2014-17:05:39

The event string:

The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was ldap/cadpdc.engineer.com/*** address email is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

An error event occurred. Event ID: 0 x 40000004

Generated time: 27/06/2014-17:05:41

The event string:

The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was of cadpdc$. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

An error event occurred. Event ID: 0 x 40000004

Generated time: 27/06/2014-17:05:43

The event string:

The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was GC/cadpdc.engineer.com/engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

A warning event occurred. Event ID: 0x000727AA

Generated time: 27/06/2014-17:05:43

The event string:

The WinRM service could not create the following SPNS: WSMAN/CADPDC1.engineer.com; WSMAN/CADPDC1.

An error event occurred. Event ID: 0 x 40000004

Generated time: 27/06/2014-17:05:55

The event string:

The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was cifs/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

A warning event occurred. Event ID: 0 x 84350444

Generated time: 27/06/2014-17:05:58

The event string:

Information System Officer: health: Post errors have been detected. One or more errors of Power-On-Self-Test were detected when the server starts.

An error event occurred. Event ID: 0 x 40000004

Generated time: 27/06/2014-17:05:59

The event string:

The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name was E3514235-4B06-11D1-AB04-00C04FC2DCD2/5122bd13-c8ac-4265-a879-3a6831224994/*** Email address is removed from the privacy *. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

An error event occurred. Event ID: 0 x 40000004

Generated time: 27/06/2014-17:05:59

The event string:

The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was ldap/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

An error event occurred. Event ID: 0x0000410B

Generated time: 27/06/2014-17:05:59

The event string:

The request for a new account identifier pool failed. The operation will be retried until the request succeeds. The error is

An error event occurred. Event ID: 0 x 40000004

Generated time: 27/06/2014-17:06:07

The event string:

The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/cadpdc.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

An error event occurred. Event ID: 0x0000041F

Generated time: 27/06/2014-17:06:30

The event string:

The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

An error event occurred. Event ID: 0x0000041D

Generated time: 2014/06/27 17:07:07

The event string:

The processing of Group Policy failed. Windows could not resolve the user name. This can be caused by one or more of the following:

An error event occurred. Event ID: 0x0000041F

Generated time: 2014/06/27 17:11:32

The event string:

The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

An error event occurred. Event ID: 0x0000041F

Generated time: 27/06/2014-17:16:33

The event string:

The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

An error event occurred. Event ID: 0 x 40000004

Generated time: 27/06/2014-17:16:38

The event string:

The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server of cadpdc1$. The target name used was LDAP/5122bd13-c8ac-4265-a879-3a6831224994._msdcs.engineer.com. This indicates that the target server could not decrypt the ticket provided by the customer. This can occur when target server principal name (SPN) is registered on one different account that the target service uses. Ensure that the target THAT SPN is registered only on the account used by the server. This error can also occur if the password service target account is different from what is set up on the Kerberos key for this service target Distribution Center. Make sure that the service on the server and the KDC are configured to use the same password. If the server name is not complete, and the target domain (ENGINEER.COM) is different from the customer area (ENGINEER.COM), check if it is the same name of server accounts in these two areas, or use the fully qualified name to identify the server.

An error event occurred. Event ID: 0x0000041F

Generated time: 2014/06/27 17:21:35

The event string:

The processing of Group Policy failed. Windows could not resolve the computer name. This can be caused by one or more of the following:

......................... CADPDC1 failed test SystemLog

Commencement of the trial: VerifyReferences

......................... CADPDC1 test VerifyReferences

Running partition tests: ForestDnsZones

Beginning of the test: CheckSDRefDom

......................... ForestDnsZones passed test CheckSDRefDom

Beginning of the test: CrossRefValidation

......................... ForestDnsZones passed test

CrossRefValidation

Running partition tests: DomainDnsZones

Beginning of the test: CheckSDRefDom

......................... DomainDnsZones passed test CheckSDRefDom

Beginning of the test: CrossRefValidation

......................... DomainDnsZones passed test

CrossRefValidation

Running partition tests: schema

Beginning of the test: CheckSDRefDom

......................... Schema passed test CheckSDRefDom

Beginning of the test: CrossRefValidation

......................... Schema passed test CrossRefValidation

Running partition tests: Configuration

Beginning of the test: CheckSDRefDom

......................... Configuration test past CheckSDRefDom

Beginning of the test: CrossRefValidation

......................... Configuration test past CrossRefValidation

Running partition tests: engineer

Beginning of the test: CheckSDRefDom

... engineer passed test CheckSDRefDom

Beginning of the test: CrossRefValidation

... engineer passed test CrossRefValidation

Running tests of the company: engineer.com

Commencement of the trial: LocatorCheck

... engineer.com passed test LocatorCheck

Commencement of the trial: cross-site

... engineer.com passed test intersite

Hi Chamarasi,

I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

Please do not hesitate to contact us if you have other questions related to Windows.

Windows server 2008 r2 domain controller deletes printers on windows 2003 Server

We have recently installed two new Windows Server 2008 R2 servers in our field. one of the new servers is the new domain controller (successor of Windows Server 2003 SBS, which has been decommissioned). There are two other Windows 2003 servers in the domain. When we turn off all servers for maintenance and then power them back on, the print on the windows 2003 Server spooler crashes; printers are deleted and the server does not allow you to add printers. is this be caused by some settings in windows server 2008 r2? This happened twice, and the solution is to rub the print on the windows 2003 Server spooler and reinstall the printers from scratch.

Hello MPF_mec29,

Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the following link:

http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Eddie B.

Windows 2003 domain upgrade to Windows 2008

I have problems to find any information about it. I do a 10 minute presentation on the following scenario. Can anyone help or point me in the right direction
- You have a Windows 2003 domain conisting of: -.
  
  1 x Windows Server 2003 AD
  
  1 x Exchange Windows 2003 Server
  
  1 x Windows 2003 file server and print
  
  1 x Aplicatiom in Windows 2003 Server (SQL, case)
  
  25 x Windows XP desktop computers / laptops
  
  You intend to upgrade/migrate to a 2008 domain. Need to consider the following:--
  
  Why update?
  
  What's new?
  
  What order/priority should take the upgrades?
  
  What are the best practices in rank?
  
  What are the problems that I am likely to encounter? Ried to solve the problem
See you soon

A dizzy

Where's your homework due?

Windows Update has nothing to do with the upgrade of Windows. Try to post in this forum instead-onlinehttp://social.technet.microsoft.com/Forums/en/winservergen/threads

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Windows 2003 installation switches DRAC4 / I

Hello.

I want to just install Windows 2003 Std R2 Sp2 to PE 1850 DRAC 4 / i media distance characteristic. For some reason, the Setup program fails.

I have connected the virtual media to the Windows Server 2003 iso image, I start PE 1850 from this image and start the installation of Windows. party mode (IE on a blue background) text succeeds. I can create partitions and the file copy starts and goes without errors. Now, if the new server restarts, GUI-mode Setup starts and stops with the error - "install could not access the files needed to continue. This can be caused by an error on the CD or CD media is no longer present in the drive. ' Pressing 'Retry' bombs back and pressing "Cancel" shows following error message - "an error was encountered which prevents the installation to continue. The internal structures of configuration data is corrupted (phase 0). Press OK to view the Setup logs files. »

Virtula media is always connected. DRAC firmware is 1.61 (later).

It is possible at all? is - that someone has installed Windows server 2003 in this way?

Andres P

I found the solution - turn off the built-in CD device. Seems like windows Search installation only the first device.

problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

Hello

I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

on the pc screen, it says - reason-442: impossible to activate the virtual card.

Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

Cisco Systems VPN Client 5.0.07.0290 Version
Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 5.2.3790 Service Pack2
Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

Start the login process

2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

Establish a secure connection

3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

Attempt to connect with the server "203.199.30.190".

4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

Launch application xAuth

6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

xAuth application returned

7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

Data in mode Config received

9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

Impossible to activate the 64-bit GOES after timeout

10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

The Client was unable to activate the virtual card on 64-bit Windows

11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

Impossible to activate the virtual map

12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

Cannot restore the file road changes.

13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

The routing table was returned to the original state before the virtual card

14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

The virtual adapter has been disabled

15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '. Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

Initializing CVPNDrv

19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

Set indicator established tunnel to register to 0.

20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

Start the login process

21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

Fixing error socket:-21. (DRVIFACE:1234)

22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

Establish a secure connection

23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

Attempt to connect with the server "203.199.30.190".

24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

Launch application xAuth

26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

xAuth application returned

27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

Data in mode Config received

29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

Impossible to disable the AV 64-bit after timeout

30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

The customer does not have to disable the virtual card on 64-bit Windows

31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

The virtual card did not recognize the operating system.

32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

Impossible to activate the virtual map

33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

Cannot restore the file road changes.

34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

The routing table was returned to the original state before the virtual card

35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

Impossible to disable the AV 64-bit after timeout

36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

The customer does not have to disable the virtual card on 64-bit Windows

37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

Impossible to disable the AV 64-bit after timeout

38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

The customer does not have to disable the virtual card on 64-bit Windows

39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

Impossible to disable the AV 64-bit after timeout

40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

The customer does not have to disable the virtual card on 64-bit Windows

41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

Impossible to disable the AV 64-bit after timeout

42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

The customer does not have to disable the virtual card on 64-bit Windows

43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

The virtual adapter has been disabled

44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '. Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

Initializing CVPNDrv

48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

Set indicator established tunnel to register to 0.

Also you need to be in 8.0 code run client Anyconnect.

--

Robet

5.1 Converter is supported by windows 2003 SP2

is it possible to migrate p2v windows 2003 SP2 with sql with the vmware converter 5.1
in the support list that I see only windows 2003 SP2 R2 is done meen two windows OS

Hello

Yes, you can. I highly recommend you use synchronization and configure the SQL service to stop (before synchronizing).

Kind regards

Plamen

Negative time CPU for service of process on Windows 2003 for 4.0.2 agent
I have configured the service of process on the Windows 2003 server with the 4.0.2 agent is installed.
Here's the copy of the metric data view:
Low tip of Avg
Use of the UC - 0,4 - 0.01% 0.16%

I have it on all the 8 servers I have configured so far.
Systems are Dell PowerEdge 1950 and not overclocked.
No idea what may cause him or how to solve it?
Hello

This is a known and documented in bug
http://JIRA.Hyperic.com/browse/Sigar-129

If you can't wait until HQ Agent 4.03 (if everything goes well, including SIGAR 1.6.2), you can download the latest libraries SIGAR and pots to try to update your Agents HQ:

http://svn.Hyperic.org/projects/Sigar/dist/SIGAR_1_6_2/lib/

HTH,
Mirko

material high interrupt CPU under Windows 2003

Hi guys,.
I have several virtual machines running windows 2003 and citrix presentation server 4.5 and I experience interruptions of cpu high on the virtual machine as 30 to 40% of the time cpu, so if the CPU is busy for 20%, it is almost 20% compared to that of the downtime.
I created a new virtual machine from scratch, tried more vcpus, cloned a physics (I know that this is what may cause, but just to test) and several other things.
The performance is very erratic, sometimes the graphic bellow is completely red. It must be a problem with a planner to UC or something. Could you guys please give me some advice? Thank you!

CPU usage increases when a system process requires more time or when several network packets are sent and received. The CPU becomes too busy when the CPU receives too many packets of the switch hardware or when a system process consumes too much time CPU. When one of these functions is using CPU resources, then it will be at the expense of the other, because the CPU is too busy. For example, if the CPU gets number of packets due to a storm of broadcasting on the network, it is so busy processing all the packages that the other processes in the system do not have access to the resources of the processor.

Just check if the CPU is busy processing network packets.

HTH

vCenter 4.1 on Windows 2003 or 2008R2?

What are your opinions on the best platform for vCenter 4.1 (Windows 2003 or 2008R2)?
We will migrate 32 bit Win 2003 from 4.0 to 4.1 on a 64-bit operating system.
Seem to remember some significant arguments for 2003, mainly due to lower congestion (8 GB vs 32 GB).
Other arguments for this, performance, best practices etc?
Thanks in advance,
IR88

for us, we want to stay with 2008 when possible. Support for 2003 is an end next life. It is also a good thing on W2K8 R2 implementation as a virtual machine if you need to add CPU/RAM, it can be done hot.

2008 is the OS of choice, I would say stick with 2008 R2

http://www.VMware.com/PDF/vSphere4/R40/vsp_compatibility_matrix.PDF

Windows 2003 to cause migration ad 2003

Similar Questions

Maybe you are looking for