Windows 7 32 b ipsec client error 789 RV220W

Similar Questions

• L2TP/IPSec connection failed for Windows 7 Ultimate for Windows Server R2 2012 with error 789.

  For this preface, I use the server in a lab environment and trying to set up my own VPN L2TP/IPSec. I opened the UDP 500 and 1701 TCP ports on my router for the interface of the primary server where is the VPN. It is on a Comcast connection consumer where other applications such as Arma 3 servers dedicated and IIS have worked.
  The RRAS role to run based on this tutorial: http://www.thomasmaurer.ch/2014/01/how-to-install-vpn-on-windows-server-2012-r2/ I have only strayed from it using DHCP forwarding instead of a static pool of IP as my router is running a DHCP server, and if I understand correctly, the router must give IP addresses of the internal IP pool which I use for everything else. I also use the PSK authentication rather than be based certificate. For the authentication of users I have MS-CHAP-V2 and CHAP enabled; I connect from the remote device with an account on that I created on the server for the purpose of this VPN I know RRAS connections are allowed.

  When the connection I get error 789: L2TP connection attempt failed because the security layer detected a processing error during initial negotiations with the remote computer. From what I've seen, this can be fixed by checking that the two ends of the connection are not behind a NAT (not an option), verification of the PSK (already done) and certificates (not applicable). If there is a way to solve this problem that would be great, but my server will always be behind a NAT firewall because the router is one, and the modem becomes one if several devices are connected to him without a router between the two.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• IPSec Client through ASA5540 error

  Hello world

  We have an ASA 5540 successfully using SSL VPN Client Tunnels without problems and have sought to build the ability for IPSec Clients can connect as well.  I have authentication works, still cannot complete the implementation of the tunnel for the client.  The customer receives an error of "secure VPn connection terminated by Peer, 433 reason: (reason unspecified peer).

  In the log on the client, I see the following when connecting:

  (this is after a connection successful, divided tunnel configurations, then this set to appear in the journal)

  377 09:29:08.071 28/02/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

  378 09:29:08.071 28/02/13 Sev = Info/5 IKE / 0 x 63000045

  Answering MACHINE-LIFE notify has value of 86400 seconds

  379 09:29:08.071 28/02/13 Sev = Info/5 IKE / 0 x 63000047

  This SA was already alive for 4 seconds, affecting seconds expired 86396 now

  380 09:29:08.071 28/02/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer =

  381 09:29:08.071 28/02/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" del)="" from="">

  382 09:29:08.071 28/02/13 Sev = Info/5 IKE/0x6300003C

  Received a payload to REMOVE SA IKE with cookie: I_Cookie = 5E1213254915B44F R_Cookie = D80631768AD86493

  383 09:29:08.071 28/02/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO *(HASH, DEL) to

  384 09:29:08.071 28/02/13 Sev = Info/4 IKE / 0 x 63000049

  IPsec security association negotiation made scrapped, MsgID = 8A3649A8

  385 09:29:08.071 28/02/13 Sev = Info/4 IKE / 0 x 63000017

  Marking of IKE SA delete (I_Cookie = 5E1213254915B44F R_Cookie = D80631768AD86493) reason = PEER_DELETE-IKE_DELETE_UNSPECIFIED

  386 09:29:08.414 28/02/13 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  etc.etc.etc... through the closure of the tunnel and removal

  So, I turned on debugging everything I can think of the ASA, and the only thing I can find that might be relevant is the following:

  ENTER SESS_Mgmt_CalculateLicenseLimit< 08b053e4="">< 086ab182="">< 0869fb4f=""><>

  Session idle time calculation: 0x1FD000, direction: receive

  Tunnel: 0x1FD002: timestamp: 6731252, now: 6731290, slowed down: 38, using this tunnel for idle

  IDLE = 38

  ENTER SESS_Mgmt_UpdateSessStartTime< 08b056fe="">< 084dc614="">< 084e2379="">< 084a73b3="">< 0931c3ff="">< 084a64fb="">< 084b6467=""><>

  SESS_Mgmt_UpdateSessStartTime: session not found 0

  ENTER SESS_Mgmt_CheckLicenseLimitReached< 08b09a7e="">< 084ac8b0="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  ENTER SESS_Mgmt_CalculateLicenseLimit< 08b099cb="">< 084ac8b0="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  ENTER SESS_Mgmt_CreateSession< 08b0a09a="">< 084ac541="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  ENTER SESS_Mgmt_CheckLicenseLimitReached< 08b09a7e="">< 08b09fd2="">< 084ac541="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  ENTER SESS_Mgmt_CalculateLicenseLimit< 08b099cb="">< 08b09fd2="">< 084ac541="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  ENTER SESS_Util_CreateSession< 08b0343e="">< 08b0a007="">< 084ac541="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  ENTER SESS_Mgmt_GetLoginCount< 08b18d71="">< 0806e65e="">< 08072627="">< 08077013="">< 0931c3ff="">< 080749ca="">< 08074ae8=""><>

  ENTER SESS_Mgmt_AddEntry< 08b088be="">< 08509b43="">< 084a9097="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  VPN-SESSION_DB in SESS_Mgmt_AddEntry p->...

  Protocol = 1

  EncrAlg = 2

  HashAlg = 2

  ignoreAcct = 0

  CompAlg = 0

  SSOType = 0

  pfsGroup = 0

  IkeNegMode = 2

  EncapMode = 0

  AuthenModeIKE = 1

  AuthenModeSSL = 0

  AuthenModePPP = 0

  AuthenModeX = 3

  AuthorModeX = 1

  DiffHelmanGrp = 2

  * TunnelGroupName = IPSECVPNClients

  server_group_Id = 0

  RekeyTime = 2147483

  RekeyKBytes = 0

  pGetCounters = 0 x 0

  pClearCounters = 0 x 0

  pGetfSessData = 0 x 0

  Temps_inactivite = 0

  ConnectTime = 0

  pKill = 0 x 8506020

  * manage = 0 x 200000

  publicIpAddr =

  LocAddrType = 0

  LocProxyAddr1 = 0.0.0.0

  LocProxyAddr2 = 0.0.0.0

  LocProxyProtocol = 0 x 0

  LocProxyPort = 0 x 0

  RemAddrType = 0

  RemProxyAddr1 = 0.0.0.0

  RemProxyAddr2 = 0.0.0.0

  RemProxyProtocol = 0 x 0

  RemProxyPort = 0 x 0

  assignedIpAddr =

  assignedIpv6Addr =:

  hubInterface = 1.0.0.0

  WINSServer-> server_type = 0

  WINSServer-> server_count = 0

  WINSServer-> server_addr_array [0] = 0x0

  DNSServer-> server_type = 0

  DNSServer-> server_count = 0

  DNSServer-> server_addr_array [0] = 0x0

  * Username =

  * ClientOSVendor = WinNT

  * ClientOSVersion = 5.0.07.0440

  * ClientVendor =

  * ClientVersion =

  InstId = 2097152

  TcpSrcPort = 0

  TcpDstPort = 0

  UdpSrcPort = 13583

  UdpDstPort = 500

  filterId = 0

  * aclId =

  ipv6filterId = 0

  * ipv6aclId =

  vcaSession = 0

  sessIndex = 0 x 200000

  ENTER SESS_Util_CreateTunnel< 08b036e0="">< 08b08a33="">< 08509b43="">< 084a9097="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  ENTER SESS_Mgmt_AddSessionToTunnelGroup< 08b1781e="">< 08b092f4="">< 08509b43="">< 084a9097="">< 0931c3ff="">< 084a64fb="">< 084b6467=""><>

  ENTER SESS_Util_FindTunnelGroup< 08b16fce="">< 08b17751="">< 08b092f4="">< 08509b43="">< 084a9097="">< 0931c3ff="">< 084a64fb=""><>

  SESS_Mgmt_AddSessionToTunnelGroup: Name of user =

  ENTER SESS_Util_AddUser< 08b1922d="">< 08b1779c="">< 08b092f4="">< 08509b43="">< 084a9097="">< 0931c3ff="">< 084a64fb="">< 084b6467=""><>

  ENTER SESS_Util_AddUser< 08b1922d="">< 08b0930f="">< 08509b43="">< 084a9097="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  ENTER SESS_MIB_AddUser< 08b198ad="">< 08b094f7="">< 08509b43="">< 084a9097="">< 0931c3ff="">< 084a64fb="">< 084b6467="">< 084b6f73=""><>

  ENTER SESS_Mgmt_CheckActiveSessionTrapThreshold< 08b09697="">< 08509b43="">< 084a9097="">< 0931c3ff="">< 084a64fb="">< 084b6467=""><>

  SESS_Mgmt_StartAcct: Failed to start for the account

  SESS_Mgmt_AddEntry: Created the Tunnel: 00200001, Protocol: 1

  VPN-SESSION_DB in SESS_Mgmt_UpdateEntry p->...

  Protocol = 1

  EncrAlg = 2

  HashAlg = 2

  ignoreAcct = 0

  CompAlg = 0

  SSOType = 0

  pfsGroup = 0

  IkeNegMode = 2

  EncapMode = 0

  AuthenModeIKE = 1

  AuthenModeSSL = 0

  AuthenModePPP = 0

  AuthenModeX = 3

  AuthorModeX = 1

  DiffHelmanGrp = 2

  * TunnelGroupName = IPSECVPNClients

  server_group_Id = 0

  RekeyTime = 2147483

  RekeyKBytes = 0

  pGetCounters = 0 x 0

  pClearCounters = 0 x 0

  pGetfSessData = 0 x 0

  Temps_inactivite = 0

  ConnectTime = 0

  pKill = 0 x 8506020

  * manage = 0 x 200000

  publicIpAddr =

  LocAddrType = 0

  LocProxyAddr1 = 0.0.0.0

  LocProxyAddr2 = 0.0.0.0

  LocProxyProtocol = 0 x 0

  LocProxyPort = 0 x 0

  RemAddrType = 0

  RemProxyAddr1 = 0.0.0.0

  RemProxyAddr2 = 0.0.0.0

  RemProxyProtocol = 0 x 0

  RemProxyPort = 0 x 0

  assignedIpAddr =

  assignedIpv6Addr =:

  hubInterface = 1.0.0.0

  WINSServer-> server_type = 0

  WINSServer-> server_count = 0

  WINSServer-> server_addr_array [0] = 0x0

  DNSServer-> server_type = 0

  DNSServer-> server_count = 0

  DNSServer-> server_addr_array [0] = 0x0

  * Username =

  * ClientOSVendor = WinNT

  * ClientOSVersion = 5.0.07.0440

  * ClientVendor =

  * ClientVersion =

  InstId = 2097152

  TcpSrcPort = 0

  TcpDstPort = 0

  UdpSrcPort = 13583

  UdpDstPort = 500

  filterId = 0

  * aclId =

  ipv6filterId = 0

  * ipv6aclId =

  vcaSession = 0

  sessIndex = 0 x 200000

  Released SESS_Mgmt_UpdateEntry: Return Code = 0

  VPN-SESSION_DB in SESS_Mgmt_UpdateEntry p->...

  Protocol = 1

  EncrAlg = 2

  HashAlg = 2

  ignoreAcct = 0

  CompAlg = 0

  SSOType = 0

  pfsGroup = 0

  IkeNegMode = 2

  EncapMode = 0

  AuthenModeIKE = 1

  AuthenModeSSL = 0

  AuthenModePPP = 0

  AuthenModeX = 3

  AuthorModeX = 1

  DiffHelmanGrp = 2

  * TunnelGroupName = IPSECVPNClients

  server_group_Id = 0

  RekeyTime = 86400

  RekeyKBytes = 0

  pGetCounters = 0 x 0

  pClearCounters = 0 x 0

  pGetfSessData = 0 x 0

  Temps_inactivite = 0

  ConnectTime = 0

  pKill = 0 x 8506020

  * manage = 0 x 200000

  publicIpAddr =

  LocAddrType = 0

  LocProxyAddr1 = 0.0.0.0

  LocProxyAddr2 = 0.0.0.0

  LocProxyProtocol = 0 x 0

  LocProxyPort = 0 x 0

  RemAddrType = 0

  RemProxyAddr1 = 0.0.0.0

  RemProxyAddr2 = 0.0.0.0

  RemProxyProtocol = 0 x 0

  RemProxyPort = 0 x 0

  assignedIpAddr =

  assignedIpv6Addr =:

  hubInterface = 1.0.0.0

  WINSServer-> server_type = 0

  WINSServer-> server_count = 0

  WINSServer-> server_addr_array [0] = 0x0

  DNSServer-> server_type = 0

  DNSServer-> server_count = 0

  DNSServer-> server_addr_array [0] = 0x0

  * Username =

  * ClientOSVendor = WinNT

  * ClientOSVersion = 5.0.07.0440

  * ClientVendor =

  * ClientVersion =

  InstId = 2097152

  TcpSrcPort = 0

  TcpDstPort = 0

  UdpSrcPort = 13583

  UdpDstPort = 500

  filterId = 0

  * aclId =

  ipv6filterId = 0

  * ipv6aclId =

  vcaSession = 0

  sessIndex = 0 x 200000

  Released SESS_Mgmt_UpdateEntry: Return Code = 0

  ENTER SESS_Mgmt_DeleteEntryFileLineFunc< 08b05ece="">< 084cfa02="">< 084d1d93="">< 084b6c3e="">< 084b6f73=""><>

  SESS_Mgmt_DeleteEntryFileLineFunc: index = 200001, reason = 0

  SESS_Mgmt_DeleteEntryFileLineFunc: Index: 0 x 00200001, reason: unknown (0-0 online) @ isadb.c:[email protected]/ * / _set_cond_dead

  ENTER SESS_Mgmt_DeleteEntryInt< 08b0b473="">< 084cfa02="">< 084d1d93="">< 084b6c3e="">< 084b6f73=""><>

  SESS_Mgmt_DeleteEntryInt: index = 0 x 00200001, reason = 0

  ENTER SESS_Mgmt_DeleteTunnel< 08b0b2b5="">< 08b0b4f9="">< 084cfa02="">< 084d1d93="">< 084b6c3e="">< 084b6f73=""><>

  SESS_Mgmt_DeleteTunnel: ID: 0 x 00200001, reason: unknown, kill: Yes, Active

  SESS_Mgmt_DeleteEntryInt: session ending after deleted tunnel

  ENTER SESS_Mgmt_FreeSessionFileLineFunc< 08b08043="">< 084d28c8="">< 084b6c3e="">< 084b6f73=""><>

  SESS_Mgmt_FreeSessionFileLineFunc: Index: 0 x ACTIVE 00200000 @ isadb.c:[email protected]/ * / _delete_entry

  ENTER SESS_Mgmt_RemoveSessionFromTunnelGroup< 08b17a3e="">< 08b07bbe="">< 084d28c8="">< 084b6c3e="">< 084b6f73=""><>

  ENTER SESS_Util_FindTunnelGroup< 08b16fce="">< 08b179b2="">< 08b07bbe="">< 084d28c8="">< 084b6c3e="">< 084b6f73=""><>

  ENTER SESS_Util_DeleteUser< 08b1906d="">< 08b179f5="">< 08b07bbe="">< 084d28c8="">< 084b6c3e="">< 084b6f73=""><>

  ENTER SESS_Util_DeleteUser< 08b1906d="">< 08b07bd0="">< 084d28c8="">< 084b6c3e="">< 084b6f73=""><>

  ENTER SESS_MIB_DeleteUser< 08b196dd="">< 08b07fb0="">< 084d28c8="">< 084b6c3e="">< 084b6f73=""><>

  I see the message where it stops and where is says "Account start failure" but I can't understand what it's showing... anyone have suggestions on what to look for?

  You need only 1 debug for that.

  Debug crypto isakmp 254

  After the release of this when you try to connect, as well as the output sanitized of:

  See the establishment of performance-crypto

  SH run tunnel-group

  SH run Group Policy

  SH run ip local pool

  and we can have a better idea of where the bat hurt.

• RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)

  HI, I am unable to solve this help please me...

  RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)
  By these Services on the server are not begin in 2008r2

  
  (1) group policy

  (2) Service Control Manager

  (3) the Client DNS events

  (4) browser

  (5) Kerberos security

  All the above services do not solve & due to this FSMO roles are
  not work & unable repeated files.

  Please help me on this point, it's to create a big problem for me here.

  Hi Varun,

  I suggest that you post this question in the Windows Server 2008 support TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• I can't send or receive emails using Windows Live Mail. Receive the error code 4402. I can send and receive email on my hotmail account.

  I can't send or receive emails from Windows Live Mail. Receive the error code 4402. I can send and receive emails from my Windows Live hotmail account. In Windows Live Mail, it also says my server is an http / imap server. Can it be replaced by a pop3 server, so, how? Thank you

  Well, took me a few hours and without the help of a person (TIP!), I've fixed it. Remove the live mail client account and re-apply / restore the account. Solves what seems to be a sync error. -19 October 2011

• Windows Update 8024402f - lots of work error code

  Windows Vista Edition Home Premium

  Service Pack2

  32 bit

  The Trend Micro Internet Security antivirus 2012; other programs installed I do not know

  Buy laptop with Vista on ii

  Windows that open the update page:

  Final check of updates: never

  Updates have been installed: never

  Installation updates page:

  KB953595 07/11/2009

  Adobe Reader X (10.1.1) 27/09/2011

  Microsoft Silverlight 4.0.60831.0 24/01/2012

  Review page your update history - all updates of definition for Defender could not leave on 19/03/2011 (definition 1.99.1460.0) until today 18/02/2012 (definition 1.119.2141.0).  No other updates for all programs are listed.

  I already have

  1. tried and waited several minutes before running update several times.  Shut the computer down and restarted all day long.
  2. Downloaded difficulty It Center and run the update patch.  There were a few difficulties but set does not completely the problem.  Note: during the installation of Fix It, I received the following message: "MATSWiz.exe---C:\Windows\system32\dssenh.dll bad Image is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media o contact your system administrator or support software provider. »
  3. Follow-up KB836941 - manually disabled my disabled Trend Micro Security, accelerators software on IE. turned on the Defender.
  4. Updated defender and necessary - then received the error.  I had to manually download the update of the Defender due to errors.  Obtained working Defender.  Don't recall the KB, I followed this.
  5. Then downloaded Windows Update Agent - the program fix did not work.  Checked to host files and proxy servers - no.
  6. Difficulty he asked responded and he couldn't have sent me this forum. Learned to read WindowsUpdateLog.

  Here is the log report AFTER that I installed the update agent and update of Defender "."  Any help you can give would be great!

  2012-02-18 14:27:15:075 3760 12f0 package Setup installation of CBS

  'c:\ae250e4e010dfe2f1378178f062ce6\WUClient-SelfUpdate-Aux-TopLevel.cab '.
  2012-02-18 14:27:41:580 3760 12f0 Setup install the installation package

  'c:\ae250e4e010dfe2f1378178f062ce6\WUClient-SelfUpdate-Aux-TopLevel.cab' succeeded
  2012-02-18 14:27:42:562 1068 1440 Misc = logging initialized (build):

  7.4.7600.226, tz:-0600) =.
  2012-02-18 14:27:42:562 1068 1440 Misc = process: C:\Windows\system32\svchost.exe
  2012-02-18 14:27:42:562 1068 1440 Misc = Module: c:\windows\system32\wuaueng.dll
  2012-02-18 14:27:42:562 1068 1440 Service *.
  2012-02-18 14:27:42:562 1068 1440 Service * START * Service: Service startup
  2012-02-18 14:27:42:562 1068 1440 Service *.
  2012-02-18 14:27:42:578 1068 1440 Agent * WU version 7.4.7600.226 customer
  2012-02-18 14:27:42:578 1068 1440 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2012-02-18 14:27:42:578 1068 1440 Agent * access type: no proxy
  2012-02-18 14:27:42:578 1068 1440 Agent * network state: connected
  2012-02-18 14:27:59:925 3760 1768 wusetup configuration is complete.  Exit code is 0. Reset is NOT

  necessary
  2012-02-18 14:28:36:632 1068 1440 report CWERReporter::Init succeeded
  2012-02-18 14:28:36:632 1068 1440 Agent * Agent: initialization of Windows Update

  Agent *.
  2012-02-18 14:28:36:632 1068 1440 Agent * Agent: initialization of the global settings

  cache *.
  2012-02-18 14:28:36:632 1068 1440 Agent * WSUS server:
  2012-02-18 14:28:36:632 1068 1440 Agent * state WSUS server:
  2012-02-18 14:28:36:632 1068 1440 Agent * target group: (Unassigned Computers)
  2012-02-18 14:28:36:632 1068 1440 Agent * Windows Update access disabled: No.
  2012-02-18 14:28:36:648 1068 1440 DnldMgr Download manager restoring 0 downloads
  2012-02-18 14:28:37:677 1068 1440 to THE # to THE: initialization of automatic updates

  ###########
  2012-02-18 14:28:37:677 1068 1440 to # approval type: on demand (user preference)
  2012-02-18 14:28:37:677 1068 1440 to THE # scheduled install date and time: daily at 10:00
  Minor updates of 2012-02-18 14:28:37:677 1068 1440 to THE # auto-install: Yes (by the user

  preferably)
  2012-02-18 14:28:37:677 at the request of 1068 1440 to THE setting at the time of installation to 2012-02-19

  16:00
  2012-02-18 14:28:37:677 1068 1440 AU initialization featured updates
  2012-02-18 14:28:37:677 1068 1440 to THE Found set 0 cached updates featured
  Setting of to THE to THE 2012-02-18 14:28:37:677 1068 1440 pending client directive to "impossible to"

  Detect"
  2012-02-18 14:28:37:677 1068 1440 only to THE delayed finish to initialize
  2012-02-18 14:28:38:956 1068 1440 report * report: initialization of static reports

  data *.
  2012-02-18 14:28:38:956 1068 1440 report * OS Version = 6.0.6002.2.0.66304
  2012-02-18 14:28:38:956 1068 1440 report * OS Product Type = 0 x 00000003
  2012-02-18 14:28:39:003 1068 1440 report * computer brand = Hewlett-Packard
  2012-02-18 14:28:39:003 1068 1440 report * computer model = Compaq Presario CQ50 Notebook

  PC
  2012-02-18 14:28:39:003 1068 1440 report * Bios revision = F.24
  2012-02-18 14:28:39:003 1068 1440 report * name of Bios = PhoenixBIOS 4.0 Release 6.1
  2012-02-18 14:28:39:003 1068 1440 report * the Bios Release Date = 2008-09 - 03 T 00: 00:00
  2012-02-18 14:28:39:003 1068 1440 report * locale 1033 = ID
  2012-02-18 14:28:44:042 1068 e94 report CWERReporter finish event management. (00000000)
  2012-02-18 14:28:52:794 1068 1440 launched THE new to THE customer for the directive "impossible to"

  Detect ", session id = 0x1
  2012-02-18 14:32:39:493 1068 10 b 0 detection of THE shutter to THE via API DetectNow
  2012-02-18 14:32:39:493 1068 10 b 0 to trigger detection online (interactive)
  2012-02-18 14:32:39:493 1068 1440 AU #.
  2012-02-18 14:32:39:493 1068 1440 AU # START # to THE: research updates
  2012-02-18 14:32:39:493 1068 1440 AU #.
  AU 14:32:39:508 1068 1440 2012-02-18<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">

  {7FB7F7C2-7DE9-467F-B9C7-E14B0E76F6B1}]
  2012-02-18 14:32:39:508 1068 e94 Agent *.
  2012-02-18 14:32:39:508 1068 e94 Agent * START * Agent: find the updates [CallerId =

  AutomaticUpdates]
  2012-02-18 14:32:39:508 1068 e94 Agent *.
  2012-02-18 14:32:39:508 1068 e94 Agent * Online = Yes; Ignore download priority = No
  2012-02-18 14:32:39:508 1068 e94 Agent * criteria = "IsInstalled = 0 and.

  DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and

  DeploymentAction = 'Installation' and RebootRequired = 1 or IsInstalled = 0 and DeploymentAction = "uninstall."

  and RebootRequired = 1 "
  2012-02-18 14:32:39:508 1068 e94 Agent * ServiceID = {7971F918-A847-4430 - 9279-}

  Service of third 4A52D1EFE18D}
  2012-02-18 14:32:39:508 1068 e94 Agent * Search Scope = {Machine}
  2012-02-18 14:32:39:508 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-02-18 14:32:39:524 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:664 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-02-18 14:32:39:664 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:680 1068 e94 Agent searching for auth cab for 7971f918 service updates-

  A847-4430-9279-4a52d1efe18d to http://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab
  2012-02-18 14:32:39:680 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
  2012-02-18 14:32:39:696 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:742 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
  2012-02-18 14:32:39:758 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:758 1068 e94 Setup looking for agent SelfUpdate
  2012-02-18 14:32:39:758 1068 e94 configuration version Client: Core: 7.4.7600.226 to the:

  7.4.7600.226
  2012-02-18 14:32:39:758 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-02-18 14:32:39:774 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:820 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-02-18 14:32:39:820 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:836 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2012-02-18 14:32:39:852 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:40:054 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2012-02-18 14:32:40:070 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:40:070 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2012-02-18 14:32:40:086 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:40:132 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2012-02-18 14:32:40:148 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:40:179 1068 e94 Setup determine whether a new installation program manager should be

  Downloaded
  2012-02-18 14:32:40:179 1068 Setup Manager SelfUpdate e94 is found.  It will be

  Downloaded
  2012-02-18 14:32:40:179 1068 e94 Setup assessment applicability of installing package 'WUClient '.

  -SelfUpdate-ActiveX ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "
  2012-02-18 14:32:40:304 1068 e94 configuration package 'WUClient - SelfUpdate-

  ActiveX ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "is already installed.
  2012-02-18 14:32:40:304 1068 e94 Setup assessment applicability of installing package 'WUClient '.

  -SelfUpdate - to the TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "
  2012-02-18 14:32:43:096 1068 e94 configuration package ' WUClient-SelfUpdate - to the-

  TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "is already installed.
  2012-02-18 14:32:43:112 1068 e94 Setup assessment applicability of installing package 'WUClient '.

  -SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "
  2012-02-18 14:32:46:154 1068 e94 configuration package 'WUClient-SelfUpdate - Core-

  TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "is already installed.
  2012-02-18 14:32:46:170 1068 e94 SelfUpdate installation verification completed.  SelfUpdate is NOT

  Mandatory.
  2012-02-18 14:32:48:510 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
  2012-02-18 14:32:48:525 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:48:572 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
  2012-02-18 14:32:48:588 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:48:588 1068 e94 PT +++ PT: synchronization of updates of the server

  +++++++++++
  2012-02-18 14:32:48:588 1068 e94 PT + ServiceId = {7971F918-A847-4430 - 9279-}

  4A52D1EFE18D}, server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: SyncUpdates failure, error = 0x8024400D,.

  the SOAP client error = 7, soap = 300, HTTP = 200 status code error code
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: SOAP fault: 0x00012c
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: faultstring:Fault has occurred
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: ErrorCode:ConfigChanged (2)
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: Message: (null)
  2012-02-18 14:32:52:113 1068 e94 PT WARNING:

  "" Method: "http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: ID:6c788ff5-7148-4981-abf6-14cb1309e2cf
  2012-02-18 14:32:55:701 1068 e94 PT WARNING: ECP: could not validate the cab file digest

  Downloaded from

  http://download.windowsupdate.com/msdownload/update/software/dflt/2009/05/2731676_2758f42e46605c9915ace2dd77

  0a693fb29dd555.cab

  with error 0x8009001d
  2012-02-18 14:32:55:701 1068 e94 PT WARNING: ECP: this trip contained some

  optimized updates failed. New number of update = 0, old Count = 30
  2012-02-18 14:32:55:701 1068 e94 PT FATALE: ProcessCoreMetadata did not return any update

  to be validated
  2012-02-18 14:32:55:701 1068 e94 PT WARNING: synchronization of updates: 0x8024402f
  2012-02-18 14:32:55:701 1068 e94 PT WARNING: SyncServerUpdatesInternal failed:

  0X8024402F
  2012-02-18 14:32:55:701 1068 e94 Agent * WARNING: could not synchronize, error =.

  0X8024402F
  2012-02-18 14:32:55:795 1068 e94 Agent * WARNING: exit code = 0x8024402F
  2012-02-18 14:32:55:795 1068 e94 Agent *.
  2012-02-18 14:32:55:795 1068 e94 Agent * END * Agent: finding updates [CallerId = of

  AutomaticUpdates]
  2012-02-18 14:32:55:795 1068 e94 Agent *.
  2012-02-18 14:32:55:795 1068 e94 Agent WARNING: customer WU didn't search for the update with

  error 0x8024402f
  2012-02-18 14:32:55:795 1068 1140 AU > # RETURN # to THE: research updates [CallId =

  {7FB7F7C2-7DE9-467F-B9C7-E14B0E76F6B1}]
  2012-02-18 14:32:55:795 1068 1140 # warning: reminder of search failed, result =

  0X8024402F
  2012-02-18 14:32:55:795 1068 1140 # warning: could not find updates with error code

  8024402F
  2012-02-18 14:32:55:795 1068 1140 AU #.
  2012-02-18 14:32:55:795 1068 1140 # end # in THE: research updates [CallId =

  {7FB7F7C2-7DE9-467F-B9C7-E14B0E76F6B1}]
  2012-02-18 14:32:55:795 1068 1140 AU #.
  2012-02-18 14:32:55:795 1068 1140 to THE need to show undetectable notification
  2012-02-18 14:32:55:795 1068 1140 to THE timeout parameter next detection to 2012-02-19

  01:32:55
  2012-02-18 14:32:55:795 at the request of 1068 1140 to THE setting at the time of installation to 2012-02-19

  16:00
  2012-02-18 14:33:00:802 1068 e94 report REPORT EVENT: {2834EEA3-6CB6-49DD-90A1-5617DF87DFEF}

  2012-02-18 14:32:55:795 - 0600 1 148 101 {00000000-0000-0000-0000-000000000000} 0

  8024402f AutomaticUpdates failure software sync Windows Update Client failed

  to detect with error 0x8024402f.
  2012-02-18 14:33:00:818 1068 e94 report CWERReporter::HandleEvents - WER report upload

  completed with status 0 x 8
  2012-02-18 14:33:00:818 1068 e94 WER sent report: 7.4.7600.226 0x8024402f 00000000.

  0000-0000-0000-000000000000 scan unmanaged 101
  2012-02-18 14:33:00:818 1068 e94 report CWERReporter finish event management. (00000000)

  Research on lead dssenh.dll me:
  http://support.Microsoft.com/kb/822798

• How can I correct the Microsoft Security Client error 0X00706XE error

  When I restart my pc Vista 34 windows, I get this error: error Microsoft Security customer, how can I solve this problem?

  Hi Debra;

  If you perhaps referring to Microsoft Security customer 0x8007064e, error Code see this thread:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/Microsoft-Security-client-error-code-0x8007064e/0e9bfe21-9104-42d9-84e4-61d40bf5e100

• Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  original title: errors for Service Pack 4 Windows Vista update - error code 643 and D59 - I do not KNOW WHAT to DO!

  Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  I DON'T KNOW WHAT TO DO!  I tried what he suggested, but cannot cross the error codes!  I am upset and frustrated because I can't work with the internet without slowing down.  I then close, only to have start all over again EVERY time!

  My internet keeps acting like dial upward because of this and I have cable internet!

  Help, please!

  This day SP4?

  Only in appropriate cases:

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Just in case where it is .NET Framework 4 -

  You can try the case just only repair the .NET Framework versions affected, especially if only .NET Framework 4 is involved.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  • Click on start/Orb and click on Control Panel.
  • Go to the program and features.
  • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
  • You should have the choice to repair or uninstall/change, click it.
  • This will then give you the opportunity to fix it
  • Select the repair option.

• Listener supports no services... ! Windows to Linux listener TNS connection error!

  Hello team,
  could you please help me out in knowing how to do an entry in the listening port so that Oracle can understand my SID = ORCL is listening this port only.

  (1) I created my 1st database using DBCA.
  

  Now, I just did an entry in the LISTENING port. ORA specifying number 1521 port,

  (2) I have created a database as ORADB I specified as 1523 port number with my host name and a different database DB3 I've specified the port number 1525.

  But I've specified blindly some port numbers and my host name, I got an error, the listener, I enclose the exit to the station.

  (3) when I try to ping at the entrance in the listening port, its success. tnsping was a success and I am able to connect to oracle using the connection string,

  My problem is why my interlocutor doesn't support all services and how the database is able to connect to the correct database. Please find the AMT and the exit. I've also added my TNS and listener files

  Earphone output:

  

  Output TNS:

  

  Sqlplus output:

  

  Listener.ora:

  LOCAL_LISTENER = (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST= dev5065) (PORT = 1521)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP)(HOST = dev5065) (PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP)(HOST = dev5065) (PORT = 1523))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = dev5065))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1527))(HOST = dev5065))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  ORCL =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP)(HOST = dev5065) (PORT = 1521))

  )

  )

  ADR_BASE_ORCL = / u01/app/oracle

  ORADB =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP)(HOST = dev5065) (PORT = 1523))

  )

  )

  ADR_BASE_ORADB = / u01/app/oracle

  DB3 =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = dev5065))

  )

  )

  ADR_BASE_DB3 = / u01/app/oracle

  CLONEDB =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1527))(HOST = dev5065))

  )

  )

  ADR_BASE_CLONEDB = / u01/app/oracle

  TNSnames.ora

  ORCL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP)(HOST = dev5065) (PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  ORADB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = dev5065) (PORT = 1523))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = oradb)

  )

  )

  DB3 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = dev5065))

  (CONNECT_DATA =

  (SERVICE_NAME = db3)

  )

  )

  CLONEDB =

  
  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1527))(HOST = dev5065))

  (CONNECT_DATA =

  (SERVICE_NAME = clonedb)

  )

  )

  Could someone help me solve this doesnot listener support service please. I posted all the details.

  I am not able to connect to my database that is present in GNU / Linux my Windows System. Can I connect to the database using command prompt in windows using the TNS database file that this s in Linux?

  example: < chaine_connexion > tnsping

  
  

  This connection string points to the current instance in the linux box and my tns is present in windows system.
  

  Thanks and greetings

  Malla Vinay

  Oracle DBA training

  Miracle Software Systems Inc.,

  Listener supports no services... !

  Windows to Linux listener TNS connection error!

  Lions and tigers and bears, oh my!

  Where to start...

  Your understanding of the role of the listener, its relationship to the database and its configuration are leaves much to be desired.

  As Sybrand said, your listener just to a port, and the default value of 1521 is quite sufficient.  This is the port that the client will use to communicate with the listener to ask for a connection.  There is no relationship between this port and any database supported by the listener, nada, zilch, zero.

  Second, you say you have entered like this in your listener.ora:

  ORCL =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP)(HOST = dev5065) (PORT = 1521))

  )

  )

  ADR_BASE_ORCL = / u01/app/oracle

  Where in the world do you have the idea to put those in listener.ora?  There is nothing like that documented in the reference Services Net (content).  Those aren't entries for tnsnames.ora, listener.ora.  And the constant repitition of ADR_BASE is useless.

  The best thing you can do is to simply delete your listener.ora file and make sure that the LOCAL_LISTENER parameter in each of your databases is NOT defined.  Thereby the listener quite fortunately starts, using port 1521, and databases to record with the port to listen on this port.  Then change your customer files tnsnames.ora to 1) always specify the port 1521 and 2) remove these entries ADR_BASE.

• attempt to copy to the windows drive is not an unknown error occurred (-54)

  When syncing my iPhone, I get the following error message near the end of the processs of 6s + 128 GB

  attempt to copy to the windows drive is not an unknown error occurred (-54)

  
  

  Someone has an idea what is the cause to happen and what I can do about it?

  Thank you

  Hello

  Here is a solution for your problem

  http://www.IMore.com/having-trouble-syncing-iTunes-after-updating-Windows-10-her're-your-fix

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Whenever I open Firefox, I had a small window to appear and reports following error "TypeError; Components.classes['@ [' softage.ru/Skype FeExtensions; 1] is undefined

  Whenever I open Firefox, I had a small window to appear and reports following error "TypeError; Components.classes['@ ['softage.ru/Skype FeExtensions; 1] is undefined

  Remove/disable Skype add-on

  Uninstalling the modules

  • https://support.Mozilla.com/en-us/KB/uninstalling%20add-ons

  Cannot uninstall an add-on

  • https://support.Mozilla.com/en-us/KB/cannot%20uninstall%20an%20add-on

  Check and tell if its working.

• Portege 600-Windows Setup has encountered an unexpected error - error Code: 0x0

  Hello

  During an upgrade to Windows 7, I get the following error message. Windows installation encountered an unexpected error - error Code: 0 x 0.

  Searching the Web I found the recommendations of setting DMA on optical drive (only), updated the bios (done), archiving (DVD media provided Toshiba Windows 7 upgrade disc) everything seems OK visually and by disabling antivirus (turned off AVG resident shield). I still get the same error.

  Help would be appreciated.

  Thank you

  This error message is displayed on what not?
  I did several times this upgrade successfully and without error messages.

  You have followed the instructions how to switch to Win7 using the second CD of component that removes all compatible and utility tools prior to update installation Win7?

• Windows Media Player starts with an error

  When I try to start Windows Media Player, I get an error box message "an application error internal that has occurred. Someone has a possible solution.

  Hi Paul,.

  You don ' say what version of WMP you currently have, but I strongly recommend to install the latest version from the Microsoft web site. It is possible that your current version is corrupt somehow.

  HTH