Windows 7 64 - bit (Professional) is really able to use fully all 192 GB of RAM?

Similar Questions

• Minimum system requirements to run Windows XP 64 - bit professional

  Original title: System requirements

  My computer is able to run Windows XP 64 - bit professional? Its a Dell Dimension 9100.

  Hey Brennan,

  Please contact Support technique Dell http://www.dell.com/support/home/us/en/ with this issue.  If you use the Service tag or Express Service Code number number you should be able to ID your computer exactly (at least it was at the time of purchase).

  If you don't find the information yourself, use the other options such as contact us or forums, or anything that seems most appropriate (as some costs and others take more time and others just guide you).

  Good luck!

  Kosh

  P.S. If you have changed anything of what has been installed originally, let them know because they will decide on the basis of information they have and won't know what you've done since then (as replaced the hard drive or other) which may affect the result.  If the answer is no, then try to find out what exactly prevents it as it can be the purchase of a component or a lot too - but it's better to know where you stand.

• Unable to find network, wifi and bluetooth driver for windows 7 64 bit professional

  Hai,

  My (Compaq 15-s001TU) G8D87PA have some problems finding the pilot network, wifi and bluetooth. My os is windows 7 Professional 64-bit edition, someone please help me find it?

  Thanking you

  Omal Bose

  Dear lasvegaswireman thank you very much for your answer. Last day I contacted the HP support team and I got the resolution, Compaq 15-s001TU comes with pre loaded back free. If you want to upgrade to windows 8, I believe that you will find no difficulty in finding the drivers for the HP product support page. But in the case of windows 7, you will not get the driver LAN, Wifi and Bluetooth page main media because HP made this model to be worked with windows 8. They provide generic drivers for above mentioned drivers missing. First of all let me dissect the details of manufactured goods of chipset for this model which is not mentioned in anywhere (not even in the catalogue).

  Blue tooth - Ralink Chipset

  WiFi-Ralink Wifi

  LAN-Realtek Chipset

  -Realtek card reader

  Chipset: Intel

  USB3-Intel chipset

  I contacted HP support to solve the problem of missing driver. You can use the following links to get missing drivers for Windows 7 64-bit professional edition

  RALink bluetooth

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-119299-1

  RALink 802.11 b/g/n WiFi Adapter

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-111782-1

  Driver and Intel Chipset Installation utility

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1&cc=us&DLC=en&LC=en&OS=4063&product=7137570&sw_lang=

  Intel USB 3.0 Host Controller Driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134312-1&cc=us&DLC=en&LC=en&OS=4063&product=7137570&sw_lang=

  Realtek card reader driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134096-1&cc=us&DLC=en&LC=en&OS=4158&product=7137570&sw_lang=

• (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?

  (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?... from a flash drive?... to change the boot order?... or at all?

  Hello

  That's right; with Vista Home Premiun upgrade paths are for Windows 7 Home Premium or Ultimate.

  It is one of the reasons why you should do a clean install.

  The other reason is that you can NOT put 32-bit to 64-bit.

  You need a clean install to do.

  Follow these steps before you install or buy Windows 7:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  _________________________________________

  And it's a way to do the clean install of Windows 7 DVD forn and Flash Player

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Using the USB method:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon

• I have windows 7 32-bit professional. It is said in the Activation status not available, product ID not available.

  I have windows 7 32-bit professional. It is authentic and for a few days I get the message that iI may have been a victim, and also the windows are not authentic. It is said in the Activation status not available, product ID not available. pls help

  Download and run the Microsoft Genuine Advantage Diagnostic Tool:
  http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results (copy button) and paste the results in your answer.

  J W Stuart: http://www.pagestart.com

• I installed adobe pagemaker 7.0 in windows 7 ultimate, but I am not able to use it, can anyone tell me about any other program that will allow me to open my page maker in windows 7

  I installed adobe pagemaker 7.0 in windows 7 ultimate, but I am not able to use it, can anyone tell me about any other program that will allow me to open my page maker in windows 7

  @

  3 samples of files pm6 and @jay chevako warning message

  On Mon, Sep 21, 2015 at 00:25, Jay Chevako [email protected]>

• My CST Studio 32-bit software will be able to use the 8 GB of RAM?

  I have 64 bit windows os and my CST Studio software is 32-bit.

  My s/w will be able to use 8 GB of RAM

  Original title: useage 64bits

  If she needs as much RAM, it will be able to use it.

  The question about the system RAM and 64-bit OS is the ability of the operating system to use more

  only 4 GB of RAM. A 64 bit OS has no direct impact on software use RAM.

  ,

• Installer crashes: OfficeJet 5610 drivers Windows 7 64-bit professional

  

  This is the result of every time that I have download the package on the HP site and try to install it on my new Dell Inspiron 17R with Windows 7 Professional 64-bit:

  Microsoft Visual C++ Runtime Library

  Runtime error!

  This application has requested the execution to terminate in an unusual way.

  Please contact the support team of the aplications for more information

  Hello

  First of all, please make sure that you use the following Setup program, with the sam file name and size:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=441125&sw_lang=

  On the start menu click folder in the search bar and open the temp folder listed.

  Select all the files in this folder and delete them, then the trash emprty (these are all temporary files, it is safe to remove).

  If some files cannot be deletions ignore these files... as soon as there is any remaining files, but there are several remining files you are fine.

  Then try to run the Setup file again and check any change.

  If it persists, open the folder %Temp%, and then open the HP installation folder that begins with 7z.

  Open the Util folder then the CCC folder.

  Run the Uninstall_L4.bat file. If nothing appears only a CMD dialog box after a few sewconds click Enter and follow the uninstall by confirming one of these... more complete uninstallation, restart your PC as required and try to reinstall the software.

  If the same phenomenon happens again, try this tool and check if this can help, following

  http://support.Microsoft.com/mats/program_install_and_uninstall/en

  If the issue still run Windows Update and make sure that you are fully up to date of tp and there is no update available, check for the difference.

• Recently I did an update to windows 7 64-bit Vista, am I able to open vista yet?

  When I restart the option comes with 2 different operating systems in, I don't know what would happen if I chose the last Vist to open. Instructions also indicates if you directly upgrade that you will not be able to revert to the previous version installed, which tells me that if I did a clean install can I go back? How does this work? Can I get my Microsoft Works wp off the coast of the old system and install to the new?

  Wrong forum. Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP Officejet 7310xi - Windows 7 64-bit - is no longer able to scan

  After scanning and resume later, suddenly I have rec'd MSG that I have "no scan options".

  1 I rebooted, also disconnected printer connections, etc. and reconnected and turned on.  Nothing helps. MSG also suggested that I need"to install or run HP sotware that future. »

  2. I did and learned that the disc is not compatible with my upgrade to Windows 7.  When the upgrade is completed, the printer has already been installed from the Windows XP environment.

  3. I thought so maybe I need a new driver and downloaded on the website of HP.  Still ain't working.  Hope someone can help me.

  Scanning options looks like you just need to activate the front panel.  You can find instructions here.  Alternatively you can find instructions on how to scan from the computer here.  Hope that helps.

• I have the Hello, I have a Windows Vista Business OP, 32-Bit - I'm not able to use my CD/DVD player - "the message,"Please insert the disk"as much as I insert a disc."

  What do you think could beb solution?

  I tried a solution by Microsoft, but I could not find filter lower or higher in the right pane - so I had to give up.

  See below;

  Windows Vista

  1. click on Start

  Collapse this includes this im

  

  and then click all programs.

  2. click on Accessoriesand then click run.

  3. type regeditand then click OK.

  Collapse this includes this image

  

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  4. in the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  5. in the right pane, click UpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

  6. in the Edit menu, click delete.

  7. When you are prompted to confirm the deletion, click Yes.

  8. in the right pane, click LowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section "next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

  9. in the Edit menu, click delete.

  10. When you are prompted to confirm the deletion, click Yes.

  11. exit the registry editor.

  12 restart the computer.

  Delroy

  Hello

  There are several methods to check the high low filters and maybe it's not yet the real
  the cause of the problem.

  -------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 64-bit professional management console disc error

  OK, I just tried to do an Assembly of 2 partitions on (thankfully) backup of hard drive to make it a player. He appears in the disk management console, but not in the window of the computer.

  I get the error message "Disk management console view not updated" with of course the usual instructions to hit refresh, out and back in or restart the computer, not of these options that work there.

  I'm just using the normal system which is outside the operating system and not all programs I've seen mentioned in other issues of the same problem.

  Anyone have a suggestion?

  Thank you

  Natasha.

  Hello Natasha,

  Thanks for posting your query in Microsoft Community.

  I understand you have questions after the merger of two partitions of the hard disk. Then, please follow the following suggestions to solve the problem.

  You can try to change the drive letter and see if that helps fix the problem.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter

  Note: Some programs make reference to specific drive letters. If you change a drive letter, it could be that these programs do not work correctly. If you get an error, the drive you are trying to change may be in use. Close a program or window that uses the disk and try again. You cannot change a drive letter if the drive is a system partition or a boot partition.

  If the above does not help then, I suggest to follow the link below and follow the steps in to solve the problem.

  A disk partition that was created just before the system crash or power failure may not be formatted or used

  http://support.Microsoft.com/kb/2539626/en-us

  Additional information:

  Simple volumes may become inaccessible if a failure occurs shortly after creation

  http://support.Microsoft.com/kb/2001877/en-us

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• I have a Dell Latitude D630 with windows Vista 32-bit professional I can download downloads of microsoft windows vista or the laptop just those

  I don't know more?

  There is only a single Vista for everything.

• Looking for Windows XP 64-bit Media Restore z800.

  I am looking to buy Windows XP 64 bit recovery media for work of z800. I searched the internet but I can not find a. HP store told me that they do not sell media of catering for XP. I buy Windows XP 64 - bit professional. I tried to install the operating system with the storage drivers and the blue machine screens. I am currently slip stream the drivers on a cd to boot, but that makes the machine bluescreen when it tries to load the storage drives.

  If anyone knows where I can get one please let me know.

  Thank you.

  Hello:

  The only place you can try is to call this number if you live in the USA/Canada.

  1-800-334-5144 you will need to have the serial number handy to give to the customer service rep.

  What is the name of the controller of storage used in your PC?

  If the setting of the controller is set to AHCI, here is the list of the supported drivers from the driver of the RST on the support page and the driver of your PC.

  . DeviceDesc PCI VEN_8086 & DEV_2681 & CC_0106 = 'Intel(r) ESB2 SATA AHCI Controller'
  . DeviceDesc PCI VEN_8086 & DEV_27C1 & CC_0106 = "Intel ICH7R/DH SATA AHCI Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C5 & CC_0106 = "Intel(r) ICH7M/MDH SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_2821 & CC_0106 = "Intel(r) ICH8R/DH / SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_2829 & CC_0106 = "Intel(r) ICH8M-E/M SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_2922 & CC_0106 = "Intel(r) ICH9R / / DH SATA AHCI Controller".
  . DeviceDesc PCI VEN_8086 & DEV_2929 & CC_0106 = "Intel(r) ICH9M-E/M SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_3A02 & CC_0106 = "Intel(r) ICH10D / DO SATA AHCI Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_3A22 & CC_0106 = 'Intel(r) ICH10R SATA AHCI Controller'
  . DeviceDesc PCI VEN_8086 & DEV_3B29 & CC_0106 = 'Intel (r) 5 Series 4 Port SATA AHCI Controller'
  . DeviceDesc PCI VEN_8086 & DEV_3B2F & CC_0106 = 'Intel (r) 5 Series 6 Port SATA AHCI Controller'
  . DeviceDesc PCI VEN_8086 & DEV_3B22 & CC_0106 = "Intel (r) 5 Series/3400 Series SATA AHCI Controller '.

  If the command is set to RAID, here is the list of supported drivers...

  . DeviceDesc PCI VEN_8086 & DEV_2682 & CC_0104 = 'Intel(r) ESB2 SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5 Series/3400 Series SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID Controller '.

  If you see a name corresponding to the controller in your device manager, then XP x 64 should be able to install the drivers of "slipstreaming" I zipped and tied below or you can select the exact you need in the list by using a USB FDD, press the F6 key when asked if you need to install a storage controller, and then use the arrow keys up/down to scroll and select the specific driver that you are interested in.

  Scroll both directions because the driver you need may not be immediately visible on the screen when it first to the top.

• Windows 7 64-bit UEFI boot USB

  Hello

  yesterday, I received my new PC. There are asus z87 gryphon UEFI BIOS ver 1707. I was assembled and tested before delivery for me. a test of the operating system was installed for testing and then removed before I got it. I bought this version of win 7: http://pro-jex.de/shop2/Windows-7-Professional-64-Bit-OEM-Vollversion-Betriebssystem-SP1

  It's a win 7 64 bit dell OEM. now, I couldn't install it, I only got to the step "expand windows files" and then it will fail with the error code. 0 x 80070017 the dvd is damaged. the dvd looks like it has stripes and used before. but I have the key that should be enough to activate and register windows 7.

  After that I tried to do a dvd on my laptop with Ultraiso image but I got stuck and always frozen at 75%.

  so I tried to install an ISO image file from digital river. I was able to install a version of windows 7 32 bit on my new PC with a USB boot. I used the windows 7 usb/dvd tool, but now when I try to do the same thing with a win 7 64-bit, the tool says 'invalid ISO file. I found all sorts of things about how I can't make a boot usb for a 64 bit OS form a 32 bit OS. and also is that I have a UEFI bios, it seems that I must examine a few extra points with this kind of bios.

  can someone please give me a step by step guide what to do. I want to install windows 7 Professional 64 bit on my new PC. and like I said my purchased OEM dvd seems to be corrupted, BUT I have the key to activate by phone. Wrap:

  currently has new PC: windows 7 32-bit professional.

  USB drive 8 GB (which I used to install win7 32bits)

  It works now and btw the dvd is not hacked, the key that comes with it works. but you must activate by phone because it is an OEM version.