Windows 7 allows me to adjust my screen resolution.

Similar Questions

• Cannot adjust the screen resolution

  I tried to reset the setting on my resolution for my windows monitor XP WITH SP1, boots upwards in mode 4 by default bits. I'm under System 32 and before I tried to download updates for SP2, WAS in MEASURE of HAVING 16 BIT COLOR, cannot adjust the screen resolution, it is locked on 640 x 820. How can I fix it?

  Hello

  What Dell? Dimension? OptiPlex? Inspiron? Others? In the meantime, I'm looking to see if there is only a single 2300.

  I repeat...

  You just do a new installation of a Windows CD?

  If you have, you will need to install all the drivers concerned material, including graphics drivers.

  Click on start, run, then type devmgmt.msc and press ENTER. In Device Manager there devices not identified or marked as having a problem (marked with!)?

  Tricky

• I just installed windows vista ultimate on my PC. I am not able to adjust my screen resolution.

  I am not able to adjust the resolution of my screen with Vista Ultimate.  If it's in 16 bits, the graphics are excellent, but the sizing of everything is huge.  There is a slide bar, but I am unable to move it.  It is in the lowest position, and he said get it up for sizing, but it won't let me.  If I use anything other than 16 bits, I can get my sizing down, but my graphics are bad.  Any ideas?

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Once you have the latest graphic drivers, then change it.

  If there is no avauilable of graphics drivers for Vista, you're out of luck.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• How to adjust the screen resolution in Windows Vista?

  Today my laptop Dell inspiron1525 changed a screen resolution of plurrie without changing.  How can I make running Windows Vista to x 800?

  Thanks for help.

  Hi Klair,

  I suggest to access the link below and follow the steps described in the article and change the resolution on your laptop.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  If you can not change the resolution by following the steps described in the article, you can try to download the latest drivers from Dell Web site for your graphics card and install and then try to change the resolution. Access the link below and download the graphic drivers for your graphics card and try to install it.

  http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=6&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=INS_PNT_PM_1525&hidos=WLH&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  Also, you can follow the steps in the link below to update the drivers to display on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WIN8: Can I adjust the screen resolution by a notification area icon?

  I have a compressed HPEnvy X 2 running Win8. I connect it to a projector of data via a HDMI/VGA adapter. In order to get the projector to display properly, I have to change the screen resolution of salvation to the lowest. I pinned control panel display icon on the desktop to make this need more quickly, but it is yet to click in it, select res screen adjust etc. Is it possible to have an icon in the Notification area that will put in place the 2 resolutions and I would change it in a single click? Moreover, the system displays for the data projector, but says that it cannot find a second screen, so I don't think that I can set permanently hi res for the main and weak wreck for the 2nd monitor

  Hi Max,.

  Area the notification provides notifications and status. Well-designed programs use the appropriately, without being annoying or distracting notification area. You can not adjust the resolution of the screen to a notification area.

  I suggest you try the steps from the following link how to change the resolution of the screen on Windows 8.0

  Get the best display on your monitor (set your monitor to its native resolution)

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Reducing the size of the Panel complete front to adjust the screen resolution of 1024 pixels / 786 pixels

  Hello.

  I designed the app and now I found the screen resolution required is 1024/786. I have a lot of orders and indicators and very worried that the façade will lose his eye and he'll take a lot of time to be set for each control and text.

  I wonder if this is the way I could shrink the size of the front panel so it automatically reduces the size of each control and indicator and it fits well in the required resolution. Any ideas?

  Thanks for help

  Kind regards

  Austin

  Hi Austin,.

  Thanks to this request, this give an example below detects the monitor resolution and resize your façade to adapt to it.

  http://decibel.NI.com/content/docs/doc-8643

  Let me know if this has help at all.

  Kind regards

• Pavilion G6 2210us + Windows 7/64: impossible to adjust the screen backlight intensity

  I replaced unacceptable Windows 8 on Pavilion G6 computer 2210uS laptop with Windows 7 (64-bit). PROBLEM - I can not adjust the intensity of the backlight display (Fn keys assigned to the change of backlight do not work, they worked in Windows 8). The screen backlight is still full intensity. HP Driver web page does not include some drivers and applications for this laptop, however, I was able to locate the missing drivers on the web sites of chipset of the seller, so the Device Manager shows all devices running and the machine works otherwise OK. What additional pilot program is necessary to enable the keyboard command change the intensity of the backlight screen? Thank you.

  No, it is not normal.

  You tell me that you didn't have the video driver installed correctly.

  Perhaps this is indeed the issue.

  Try the HP Windows 7 driver for your video card and see if it works better.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-107649-1&mode=4&IDX=1&prodTypeId=321957&prodSeriesId=3688868

• I bought HP 360 spectrum running 64-bit window 8.1 with 2560 X 1440 screen resolution. When I opened Acrobat Pro legends XI in the title bar are so small that they are almost unreadable. Any solution? Thank you

  

  Support of screens HiDPI (which is a resolution of 2560 x 1440) has been added to Acrobat DC.

  -Dov

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• After restoring my system to Windows Vista, my screen resolution is incorrect.

  Screwed up resolution :(

  I had to restore my computer to Windows vista after putting 7 window on it... now my screen resolution is turned off, it is the top of the screen to the bottom, but has 2 black bars on the sides... Ive already tried to settle the reso to max, but this isn't the problem. Help

  Apparently, that's what to do, another great problem, I can't get my internet to work at all, it says there is no network, I can't spend all the discovery network on or anything, and I have NO idea where the original disc is provided with the computer :( Hating technology now

  You have a computer that works (obviously).  You probably have a USB stick/thumb drive/CD or DVD, you can use and a way to write, huh?  Something like that?

  Get what you need to the manufacturer of the computer support and the web page of the driver of your make & model of computer (that you try to fix) while on this computer to work and put these files on the mentioned media.  That put media into the computer you try to set and use the programs installation either him or copy them to the desktop of the computer in question and install from there.

• Windows 10/ID inconsistent CS6/screen resolution?

  I have a weird problem.  Use the software on adobe for years and this has just started happening when I got a new computer and upgraded to Windows 10.

  I keep my screen resolution to 125% because I need to the larger text, etc.  In Windows 10, I find that Photoshop and Illustrator work well with the resolution of 125%, but InDesign is HUGE and fuzzy.  I have to lower the resolution of the screen at 100% to discern the elements on the screen, but everything else is tiny and I can't go from one program to the other, what I do often.  This means also having to change the resolution of the screen again and again throughout the day.

  My computer guy said that ID behaves correctly although AI and PS not, even if they are the ones that I prefer the size. Here is a screenshot of the character side by side palettes (PS, HAVE, then ID) to 125%.  The versions of Photoshop and Illustrator are clear and easy to read, but the InDesign one is unclear and too much.

  Does anyone have a problem with this or you know a solution to fix?  I don't know why it just started happening that the move to Windows 10.  Do you think that Mobile ID CC would help with this issue?  (I know... I'll have to do later, but this means a lot of work with the already recorded in ID CS6 files, so I am not impatient for there.)  Thanks for any help anyone can give me!

  GS

  

  Why switch to CC means a lot of work with files sooner?

  I might try the tests and see if they help with the issue. The user interface has been updated for HiDPI screens.

• Re: Satellite L855 and Windows 8 - can't adjust the screen brightness

  Hello world!

  I installed Windows 8 on my L855 Satellite and it is running pretty well except that I can not adjust the screen brightness. I have updated all drivers for win 8, but it does not solve the problem.

  Hope someone can help me! Thank you!!

  Can you do this using the settings in some diet plan?

• Windows 7 update - screen resolution

  After that the last automatic Windows 7 update, Windows 7 is not recognizing my wide screen and is not allowing me to set the correct screen resolution.

  Download and install the latest graphics drivers. Find them in the site of the manufacturer of your PC in a first time, or, if the manufacturer of the graphics device. After installing them, try adjusting your resoulution again.

• Portege R700 - cannot adjust the 1366 X 768 screen resolution

  My screen does not have the entire screen - he ends up on about 2cm on the right side.

  The problem is that I can't adjust the 1366 X 768 screen resolution. Highest on the list of options is 1200 X 800. I downloaded the current driver - but it does not help. I used system restore a few times and it is sometimes useful, but not always - IE, it defines the resolution of 1366 X 768, and all goes well.

  It makes me crazy!
  It's a R700, windows 7, 64 bit.

  Are you using the original Toshiba recovery image? I mean the original pre-installed OS that you got with your laptop?

  I mean the original image is designed for certain model of laptop, so I can't imagine that this problem occurs with the Toshiba drivers.

• How to adjust the GUI on different screen resolution?

  Hi all

  I have an application that must be deployed on different stations with different screen resolutions. I want my application to be responsive, that it should be settled well in accordance with the resolution just like sensitive site. Is it possible to do?

  You have at least two simple ways to accomplish what you want: setting the resolution and dispatchers.

  The first automatically adjusts Panel when it is displayed on a screen with a different resolution than it was desigend on

  Dispatchersneed a little more effort: basically, they can be used to change the appearance of the window when they are moved interactively by the operator or by programming with OperateSplitter. You can decide what controls are suitable when a divider ir operated and if they are moved or resized.

  In the case of your example of the user interface, a horizontal separator could be used to resize the text box and move down buttons when the Panel is maximized.

  The choice between these alternatives is on hand: I personally do not feel good with the brutal scale operated when you use the resolution setting so I normall use dispatchers to adapt application windows to the size of the screen.

  You can see examples of the couplings in docking.prj and examples of splitter.prj located in the samples\userit folder. For an example of the first methos, the value attribute setting resolution 100, change the resolution of the screen and see what happens when you launch the program.