Windows 7 "cannot be authentic" after returning from the Windows 10

Similar Questions

• Cannot access folders after recovering from the virus.

  My system was infected by the virus from Windows recovery. It seems to me have removed, but now I can't access certain folders, such as Documents and settings, Cookies, ect. Change permissions don't seem to work. I'm getting an access denied.

  Hello

  Make sure that you have tried the steps listed in the article provided in the method 1 to change permissions.

  Method 1:

  I suggest you try the steps from the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  Method 2:

  Alternatively, you can scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• Satellite L falls down after returning from the mode "sleep."

  My laptop has this bug, whenever he goes to "sleep" when it "wake up" the system said that Explorer windows stopped working and almost everytime I have to restart with the power switch. I changed the operating system from Vista to windows 7, but he continues to act like that. Someone at - it a solution?

  Hello

  For me, it looks like a Windows operating system problem.
  Maybe you should try a CCLeaner which cleans up the registry and other files on the HARD drive.
  You should also try to defragment the HARD drive.
  If no improvement is noticeable and Explorer windows would keep crashing, then a new installation of operating system is necessary.

  Good luck

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  10 Windows Internet Explorer with the Acrobat Reader plugin is available.

• c:\windows\system32\osk.exe, a referral was returned from the server

  My scren keyboard on does not: error when I try to use:c:\windows\system32\osk.exe, a referral was returned from the server

  Hi Kevin Urubek,

  1. what operating system do you use?
  2 is connected to the domain of the computer?

  Method 1
  If the steps above fail, I suggest to create a new user account and see if you get the same error message, the following link will allow to create new user account.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If everything works well in the new user account, then I suggest you to follow the article to transfer files and settings to the new user account.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  
  Method 2
  If you're windows7, try the steps from the following link:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• White screen after booting from the CD.

  I had a virus, could not even open in safe mode, had a tech working on the computer so I could connect.  After that, I tried again and reload Windows XP from CD.  All right, 9 discs to and forward to the end.  Now, the computer starts but stops with a black and white screen.

  Ideas?

  Hello
  
  1. don't you get the beep when you press the power button?
  2. installation launched successfully?
  3. do you get the BIOS screen?
   
  Method 1.
  I suggest to unplug all external devices such as printers, scanners, etc. of the system and then try to boot to the desktop and check.
   
  Method 2.
  Also I ask you to set the BIOS on default and check parameters. You can contact the manufacturer of the computer for these settings.
  Note:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  Method 3.
  Also refer to the procedure described in the article below and check.
  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/kb/314503
   
   
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I return from the page of google search for a link then button does not return return

  When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

  the problem was resolved after remooving extenshion «user agent overrider»

• A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030D. The internal error state is 10001.

  Hello

  I just bought an HP computer, Windows 8 Pro, x64bit. I worked OK for a week and then started to freeze. It freezes all the time. I'll send the error message in the event log. I'd appreciate your help because I've had enough of this gel and I turn it works all the time.

  Log name: System
  Source: Schannel
  Date: 12/07/2013-12:55:12
  Event ID: 36870
  Task category: no
  Level: error
  Keywords:
  User: SYSTEM
  Computer: Aleksey
  Description:
  A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030D. The internal error state is 10001.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      36870
      0
      2
      0
      0
      0 x 8000000000000000
     
      7179
     
     
      System
      Aleksey
     
   
   
      Server
      0x8009030d
      10001
   
  

  Thank you

  Hi Aleksey,

  I appreciate the efforts that you put to publish the query on this forum.

  Please help me with the following information about this issue:

  (1) is the computer that is connected to a domain network?

  (2) when exactly you receive the error message? It is by accessing any application?

  If the computer is connected to a domain network, I suggest you send the request on 8 Windows IT Pro. Check out the link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Please let us know if the computer is not in a domain. We will be happy to help you come.

• VMware workstation 8 briged connection cannot get an ip address from the dhcp server

  Hello, I hope someone can help me with this problem, my virtual machines are unable to obtain an ip address from my dhcp server in windows server 2008R2.

  VMware workstation 8 is running in windows 7 proff. 64-bit OS. My gets physical computer an ip Server dhcp without problem have access to the internet and everything works fine, but my VMs for some reason any cannot obtain an ip address from the DHCP server.  I updated virtual nework Briged editor one of my physical network interface cards. Then I put my VM NIC to briged in for some reason my VMs are unable to obtain an ip address. The ips only I get are 169.254.43.129 Add 255.255.0.0. any help would be very happy. Thank you very much.

  FYI - you have posted some of the vmware.log

• After coming from the mode screen resolution problem 'sleep'. Vista SP1

  Hello

  I have a Lenovo laptop 3000 N200 0769-BXG (nVidia 7300). After installing the Vista SP1 a few days ago, I have a problem with my resolution. He switched to 1024 x 768 each time after coming from the mode 'sleep'. My native resolution is 1680 x 1050 and I have to rearrange my icons every time, witch is a bit annoying.

  I have red that it is a problem not only on laptops Lenovo-Vista and I need to install the latest video driver, but I have the latest drivers.

  Can someone help me please?

  Thank you

  Hello

  Here is the downloadlink to the nvidia updated the driver.

  NVIDIA driver

  Let me know if it solves your problem.

• ORA-22992: cannot use LOB Locators selected from the remote tables...

  Oracle 10.2.1.0.4
  Solaris 10
  
  We try to access a table in another database via a db_link.
  
  The table we are trying to access has a LOB.
  
  We get the following error: ora-22992: cannot use LOB Locators selected from the remote tables.
  
  Is there a way to get around this? We need the data in the BLOB field.
  
  Thank you.

  See on metalink:

  ORA-22992 has a workaround solution in 10 gr 2
  DOC - ID: 436707.1

  Werner

• After the update for tvOS 9.1, it cannot play Live Video Streams from the start, Breaking NHL Gamecenter Live

  Since tvOS 9.1, update when I try to play an ongoing game from the beginning, using the NHL Gamecenter Live application, it will start playing for a second and then jump to live.  Basically, it breaks the app for the way I use it.  You can save 10 seconds each time, and he will play where leave you, but if interrupt you or try to fast forward / rewind it leap backward to live again.

  Jumping to living like that can easily spoil a game showing you the advance score.  In addition, it allows me to watch a game that has already started overnight since I don't want to miss the beginning of the game and can not start from the beginning to the end of the stream.

  I contacted NHL Gamecenter Live about this and they made it the Apple TV update:

  "At this time, the new Apple TV update does not support advance fast/quick return characteristic of live broadcasts."

  Does anyone know of a way around this, or if this is a bug or design?  If it's normal then Apple has actually ruined my Apple TV after only a few weeks of use.  I really hope that's not the case.

  Has anyone else noticed this problem?  I can't find any discussion about this but it seems like a pretty major flaw for me.

  Thank you!

  Scott

  I accidentally tag this message with iOS 9.1, it had to be tvOS 9.1.  Sorry about that!

• XP Home BSOD after return from standby (Standby).

  Here is the data from the Minidump:
  

  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\WINDOWS\Minidump\Mini010510-12.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows XP Kernel Version 2600 (Service Pack 3) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer personal TerminalServer
  Built by: 2600.xpsp_sp3_gdr. 090804 1435
  Computer name:
  Kernel base = 0x804d7000 PsLoadedModuleList = 0x805634c0
  The debugging session: 21:51:44.500 Mar 5 Jan 2010 (GMT-5)
  System Uptime: 0 days 0:02:15.234
  Loading the kernel symbols
  ...............................................................
  ...................................................
  Loading user symbols
  Loading unloaded module list
  ..........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck F4, {3, 8a 105524, 8060567e, 8a1053b0}

  Unable to get nt! KiCurrentEtwBufferOffset
  Unable to get nt! KiCurrentEtwBufferBase
  Probably caused by: hardware_disk (+ fc)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  CRITICAL_OBJECT_TERMINATION (f4)
  A process or thread crucial to system operation has unexpectedly left or been
  terminated.
  Several processes and threads are necessary to the functioning of the
  System; When they are finished (for some reason any), the system may not
  function longer.
  Arguments:
  Arg1: 00000003, process
  Arg2: 8a1053b0, object of ends
  Arg3: 8A 105524, name of the process image file
  Arg4: 8060567e, explanatory message (ascii)

  Debugging information:
  ------------------

  Unable to get nt! KiCurrentEtwBufferOffset
  Unable to get nt! KiCurrentEtwBufferBase

  PROCESS_OBJECT: 8a1053b0

  Nom_image: hardware_disk

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  FAULTING_MODULE: 00000000

  Nom_processus: csrss.exe

  EXCEPTION_RECORD: b730f9d8-(.exr 0xffffffffb730f9d8)
  ExceptionAddress: 75b7b3b9
  ExceptionCode: c0000006 (in page i/o error)
  ExceptionFlags: 00000000
  NumberParameters: 3
  Parameter [0]: 00000000
  Parameter [1]: 75b7b3b9
  Parameter [2]: c000000e
  A paging operation is not to 75b7b3b9, because I/O error c000000e

  EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The required data were not placed in memory due to a State of error / "0 x % 08 lx.

  CUSTOMER_CRASH_COUNT: 12

  DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

  Error_code: (NTSTATUS) 0xc0000006 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The required data were not placed in memory due to a State of error / "0 x % 08 lx.

  EXCEPTION_PARAMETER1: 00000000

  EXCEPTION_PARAMETER2: 75b7b3b9

  EXCEPTION_PARAMETER3: c000000e

  IO_ERROR: (NTSTATUS) 0xc000000e - a device which does not exist was specified.

  EXCEPTION_STR: 0xc0000006_c000000e

  FAULTING_IP:
  + fc
  75b7b3b9?              ???

  BUGCHECK_STR: 0xF4_IOERR_C000000E

  FOLLOWUP_IP:
  + fc
  75b7b3b9?              ???

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: hardware_disk

  SYMBOL_NAME: + fc

  STACK_COMMAND: kb

  FAILURE_BUCKET_ID: 0xF4_IOERR_C000000E_ + cf

  BUCKET_ID: 0xF4_IOERR_C000000E_ + cf

  Follow-up: MachineOwner
  ---------

  I tried; disconnect all usb drives, updating the drivers of Intel 82801FB/FMB, update drivers from Nvidia 9800GT chipset, disable the write cache on the SATA drive, update the network drivers.

  System works perfectly otherwise. Its own BSOD during the return of the mode standby.

  I solved this problem just: my setup had 2 cd discs using the primary IDE channel and a Sata drive on the 2nd Sata channel.

  I bought the computer used and it was how it has been implemented (and it worked fine in this config without using sleep).

  It turns out that the HD (with the top OS) must be connected on the first channel of Sata (Sata (0) on my Dell) so he can wake up correctly the mode standby.
   
  I just disconnected the Sata round cable and moved to first, then changed the BIOS to reflect this change, and everything's fine.

• Gel after returning from standby

  Windows 7 64 bit

  I use a lot of waiting. After that I wake the computer from sleep mode, it works as expected; but sometimes, when I run a program (usually VLC), the PC freezes, more input not possible, hard power off required. This isn't a problem of input device. The power button on my computer should cause the PC to stop but does not either when the system is frozen.

  If I do start VLC (or another program that causes the gel), the PC would either freeze during shutdown (power off), or follow these steps if I started the day before: the rotation of the drives down, monitors are not getting a signal more, cooling fans and the CPU fan still spinning. After about 5 minutes the PC turns off hard.

  When I turn on the PC after a hard stop, the message "Windows is not stopped correctly. You want to try safe mode? »

  I composed the PC myself, so I have to identify the material originally from the problem... If it was caused by the material. I know that it's not caused by my hard drives of 2 TB. I know there is a similar problem, caused by the slow rotation of the 2 TB drives implementation. I tested my system will detect the connected disks and it still frozen. Disable all startup items has not solved the problem.

  Here is a list of my equipment:

  Mobo:
  980DE3/U3S3
  CPU:
  AMD FX 8320
  RAM:
  2x8GB crucial DDR3 of Sport
  Video card:
  ASUS Radeon R7260X, PCIE
  HARD DRIVE:

  Crucial MX100, SATA (SSD)

  various bis Magnetfestplatten 2 TB

  OPERATING SYSTEM:
  Windows 7 64 bit

  POWER SUPPLY:

  800W

  Yet another update:

  I recently installed Windows 7 new and frost have yet taken place. Only a few programs have been used:

  Chrome, Skype and VLC (since these seem to 'help' freezes)

  I also tried Ubuntu, where the system does not freeze. This could be because Ubuntu uses a different expectation.

  Currently I am in my old Win 7 installation and try different programs, not only not their use.

  Firefox instead of Chrome-> gel

  No VLC-> gel

  No Skype-> gel

  Thus, any of these programs makes my PC freeze

  ASRock (my mobo manufacturer) suspected hardware fault. Alas, I can't trace it either PSU or mobo.

  Install Windows 7 from scratch, I realized sleep (aka standby) is usable only if the video card drivers are installed. It may be that this device / driver is the culprit?

  Edit: it seems I found what caused the problem: Reader adobe flash (plugin). Since it is used by Chrome and firefox in watching Youtube, my system froze with the two programs. Since I updated the driver (including firefox only suggested) no more freezes have been held since a few days now. This may be premature if. I will present after a while to confirm.
  Meanwhile, I post a link to a thread that seems to focus on the same problem:
  http://www.TomsHardware.co.UK/Forum/67304-63-Flash-content-freezing-computer