Windows 7 does not recognize the USB Drive flash drive
When I plug my genx its recognized as unknown device 16 GB flash drive, I tried to uninstall the driver and then reinsert the flash but the problem still exists, I guess my computer needs driver Flash
Device status:
Windows has stopped this device because it has reported problems. (Code 43)
Thanks for your reply, I tried these steps and the same error exists. I think that there is a failure on my device and can be no repair.
Tags: Windows
Similar Questions
-
Install Windows 8 does not recognize the system drive
I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.
Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.
The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.
I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.
Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.
This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.
Thank you in advance for any assistance.
Windows 8 Pro 64-bit (full version) - OEM
Intel Core i5 - 3570K
Card mother GIGABYTE GA-Z77X-UD5H
Crucial Ballistix 2 x 8 GB DDR3 1600
Crucial M4 2.5 "128 GB SSD (system disk)
WD Green WD30EZRX x 4 (data readers) 3 TB drive
Rosewill Challenger-U3 ATX Mid Tower Case
SeaSonic M12II 620W 620 Bronze PSU
ASUS DVD writerThe DSS must be LOW LEVEL FORMATE.
Once, there may be no other [HDDs] not connected to the SATA ports.
Install Windows 8 Pro now.
[Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.
-
Qosmio F30 - 112 - Windows XP does not recognize the HARD drive
Hello.
I have a Qosmio F30-112.
I tried to install the Windows XP Professional instead of the Media Center edition.
However, during the execution of the installer, my laptop does not recognize the hard drive. Therefore, the installation cannot continue.I thought it might be a problem of corruption with my laptop and reinstalled Media Center Edition successfully.
But when I try to install XP Professional it always gives me the same error.Suggestions for the configuration of the BIOS or solutions for why this is happening?
Thanks in advance.
Hello
Just a question:
You are looking for in this forum for other similar issues with regard to the installation of Win XP and lack HARD drive? I doubtThe fact is that your notebook has a SATA controller and you need a SATA (Intel Matrix Storage Manager) driver.
You should have a look here in this doc from Toshiba:
[How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]and should also search this forum for other threads
Good bye
-
Lost in car-Windows xp does not recognize the slave drive
I do reinstall xp home, no problem when I did the system does not recognize the slave drive I have. As far as I can tell that it's all hooked up correctly. When I go into disk management it does not recognize the drive either. All of the suggestions.
Hi james.williams,
- How is the drive connected to the computer?
- What is the number of the brand and model of the player?
I suggest that you check the jumper settings and make sure that the jumpers are correctly positioned.
Make sure they are in the two master/slave jumper and not cable select.
-
Recovering the Windows system does not recognize the hard drive
Computer does not recognize the hard drive when booting. Guard gives me 1782 disk error. Then try to use the ROM installation thing and throw a disc hard test there is no option to test anywhere. Computer was working fine this morning and then I stop when I turned it back on it was not properly start.
I have a zt3000 running xp sp3
someone please help me, thanks
Hello
Please reinsert the drive from the rear panel and check if the device detects the drive hard in case you have the same problem, then the hard drive is bad, you need to replace the hard drive and reinstall the operating system on the unit to return to its operating state.
-
Computer Windows Vista does not recognize the USB mouse
Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it
worked but stopped, got a new mouse and still does not recognize it. I really need it... help please
Hello
1. do you get an error message?2. would either not detected other USB devices in the same port?
Method 1: perform the steps in the article mentioned below and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Method 2: run the Fixit and see if the problem is resolved.
http://support.Microsoft.com/mats/hardware_device_problems/en-usMethod 3: update the chipset drivers and see if the problem occurs.Note: you must contact the manufacturer of the computer to update the chipset driver.
Hope this information helps. -
Windows 7 does not recognize the DVD drive! HELP need before March!
Guys, my DVD drive was wrking a few weeks now, it's not. Windows 7 does not detect it shows in my computer or Device Manager it isn't freeking.
Although, when I start my system, I checked it in the BIOS and it has been detected. So please help me! I need a solution before March 2012...Hello
Do you know if there are major changes or downloads or something like that to the computer until the reader has stopped working?
Have you tried a system repair on a date where the car worked very well?
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore -
Windows 7 does not recognize the optical drive.
My Optiplex 3010 refuses to recognize the drive R/WDVD. It used to, but now does not work. It does not appear on the list of Windows Explorer of connected disk devices, and on Device Manager, it has a yellow "!" next to it, showing the existence of some kind of conflict.
Dell technician you changed every piece of hardware in the system, but there is no change.
It is recommended to reload the operating system, but I'm not sure that's possible when the optical drive, which emerges my backup does not work. ?
I tried the system restore, but there are only a few recent brand-places and this problem is ongoing for longer than this.
So, is it possible to restore the operating system to health short to start all over?
I tried your suggestion to see if the drive is recognized by the BIOS, and it is. So, as you say, it's a Windows problem (no surprise).
The thing that I was worried about most is having to reload the OS of my backup restore DVD disk using a disk drive does not work. But, you pointed out that if the BIOS recognizes the drive, the disc should be readable.
I just have to devote myself a day or two to reload all my programs applications to deal with another failure of a Microsoft OS to steel. Grrr! :- (
-
Windows 7 does not recognize the USB 32 GB
I have a Sandisk Cruzer 32 GB USB stick key, as I would like to transfer a single file of 9 GB between my two laptops.
The memory stick appears and works very well on a laptop (Acer) - while working. However it does not appear on my other laptop (Compaq) after plugging him. Laptop computers are Windows 7 Home Premium 64-bit, both use the NTFS system and the memory stick was formatted in this way also.
I used the disk on the Compaq Management and (after a while) the memory stick appears. In order to avoid any conflict between the drive letters, I have re-assigned to the M: drive and that seemed to work. However, it does not ALWAYS appear in the Windows Explorer, so I can't transfer any files to it!
Any help would be appreciated!
Thank you.
Hello Stephen,
When looking for hard drives, USB flash drives or CDs and readers of DVD using Windows Explorer, you may notice that some readers are not in Windows Explorer or the drive may disappear after a short period, or when Windows resumes or Hibernation. This may be caused by the following:
- Your player does not have a drive letter assigned in disk management
- The player can be disabled or offline
- Your USB driver is maybe corrupted
- Damaged registry keys may be the cause of problems with the connection to your CD-ROM or DVD drive
- When you connect other USB devices on the computer, they work well?
- What is the status of the Sandisk Cruzer 32 GB USB drive in the Device Manager?
- You have Kies installed on the computer?
Reference:
Cruzer flash NOT detected by Windows PC drive
Refer also to the suggestion of Karena R responded on December 28, 2010
Please return with the necessary details so that we can help you further.
-
Lite-On ENAU108 CD Burner IT does not recognize the USB key
Windows Media Player does not recognize the USB drive letter
Although the Windows Device Manager recognizes it.
I want to add drive from the device to WMP
Hello
1. have you made any hardware changes or software on the computer before this problem?
2 - is the USB key in Windows Explorer?
3. you try to transfer music files from the USB key?
4. what version of Windows Media Player do you use?
If you use Windows Media Player 11 & try to add media files in Windows Media Player, you can follow these steps.
a. open the Windows Media Player, click on organize > manage libraries > music.
b. click Add and navigate to the location where the file is stored in the Windows Explorer.
Reference: Add items to the Windows Media Player libraryHope the helps of information.
Please post back and we do know. -
NSLU2 does not recognize the hard drive
Hello
I have a NSLU2 on Win XP SP3.
It does not recognize the USB drives, he wrote that 'drive not formatted '. It only recognizes the USB key as "disk2".
Current firmware is V2.3R29.
When I try to update the firmware, the "not enough disk space" message.
I tried the same disc on a different NSLU2 and it worked fine.
What can I do my NSLU2 reading displays the disc correctly?
Thank you very much for your help!
Markus
It seems to be a firmware issue... The V2.3R29 firmware. is quite old. The latest firmware is Ver.2.3R63... Hard reset the NSLU2, power cycle it and then try to update the firmware. After upgrading the firmware, reset it again and reconfigure... Disconnect the HARD drive before upgrading.
-
Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "
I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?
My laptop is a Qosmio F60
This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.Some other HDD is recognized correctly?
What you can try is to reinstall the chipset driver, restart the laptop and test it again.Since when you have this problem? Some installed updates of the last days?
-
Aspire One d255 does not recognize the usb connected external ssd drive
I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive. Is there a way to clone my hard drive SSD, so I can exchange the disc later? I need to update the bios, install a missing driver, etc. ?
I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works. I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either. Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10. It worked and my system boots now in less than 20 seconds. We can close this thread now since I now have a faster machine fully function. Thank you!
-
Windows does not recognize the USB key for backup
Windows does not recognize my USB drive for backup. Windows seems to give this option, but requires that I have to use a disc in drive D. How can I change this?
Original title: Windows 7 backup
With USB installed & in the office, go in run, type: diskmgmt.msc
MSC, locate & L.click on hardware, go to actions, all, select: activate
closing of msc
-
Win 7 Backup and Restore does not recognize the USB flash drives.
Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc. Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.
Back up and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questionsYou can't save backups to a flash drive, you need an external USB hard drive.
Never be afraid to ask. This forum has some of the best people in the world to help.
Maybe you are looking for
-
How to install IIS 7.0, while the standard method does not work?
In order to install/assets * Internet Internet Information Services on windows 7 *, you must use configuration panels and turn right, windows features by clicking on the additional services you want to install. On my Toshiba satellite, this little wi
-
Equium A300D - 16 c coursor jumps touchpad
Hello I had a computer satellite phone for awhile now.But all of a sudden the touchpad seems nervous and every now and then everything stops, wait... so keep. It is very annoying because I play and it becomes a problem ive tried everthing: a restorat
-
HP ProBook 4540 s missing device unknown
It's my 3rd day since I bought this new HP probook 4540 s [Nr B9A39PA #UUF] and I like it, I did a clean install of windows 7 ultimate x 64 and I have just realized that the drivers of hp support page dose not has all the drivers for the ultimate ver
-
Lenovo V series simultaneous keyboard / Trackpad editions.
So after a year and a half trying to get Lenovo to replace my Thinkpad Edge 14, I decided finally enough was enough and has managed to get an Ideapad again. I got the Y510 two or three years back, and it was / is still a fantastic camera! However, th
-
For some reason any, that my Windows Contacts show now an icon of Adobe for each of them, and when I try to open Adobe Reader 9.0 starts, then tells me that it can't read the file. I tried right-clicking and using "open with...". "to set a default v