Windows 7 Home Edition, taking a lot of time to install updates

Similar Questions

• Windows xp home edition I get SP2 if I access not updating windows? I just ran a recovery disk

  I have just run a recovery disk and cant accesss windows upgate. Can I get SP2 for XP Home Edition so {can get SP3

  Preliminary work:

  Download the installation files from SP2, SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of four files:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install SP2. Restart TWICE.

  4. install the SP3. Restart TWICE.

  5 move to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  6. install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  8 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  9. reactivate the automatic updates.

  ADDENDUM:

  If you currently have a trial version of Norton or McAfee, hold off on the updates for now and let me know which you have!

• Commit to taking a lot of time for the update statement to bulk - 11 GR 2

  Hi team,

  We have a source table, which is the main table for our application.

  When I commit a transaction after update block, it takes long about 2 to 4 minutes.

  I don't understand why it takes too long...

  Could you please help me on this fix, please...

  It's the details on the table,

  Total number of records: 35 M record

  Validation interval: 500 records / commit

  Total scores: 3

  total number of columns: 95 - including primary, unique and foreign key columns (all columns will be updated for each update because update from the app online)

  Total no of the foreign key columns: 12

  Unique key column: 1

  Total index: 27 ( including the key index foreign 12 + 1 + 1 index of primary key Unique key index )

  example of update statement,

  UPDATE DIRECTORY_LISTING_STG
  SET
    COLUMN_1 = :VAL_1
    .
    .
    .
    COLUMN_94 = :VAL_94
  WHERE RECORD_KEY = :P_KEY_VAL;
  
  

  The table is.

  Plan hash value: 2997337465
  
  --------------------------------------------------------------------------------------------
  | Id  | Operation          | Name                  | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------------------
  |   0 | UPDATE STATEMENT   |                       |     1 |   308 |     3   (0)| 00:00:01 |
  |   1 |  UPDATE            | DIRECTORY_LISTING_STG |       |       |            |          |
  |*  2 |   INDEX UNIQUE SCAN| XPKDLS_STG_PARTPN     |     1 |   308 |     2   (0)| 00:00:01 |
  --------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     2 - access("RECORD_KEY"=TO_NUMBER(:P_KEY))
  
  

  Details of the database,

  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
  PL/SQL Release 11.1.0.7.0 - Production
  "CORE 11.1.0.7.0 Production"
  TNS for Linux: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production
  
  

  Thank you

  RAM

  2793617 wrote:

  Hello

  I am updating table via an application using Hibernate jdbc connection online.

  If the update statement will be sent to the database in a pack of 500 documents (batch update).

  Thanks Ram

  line-by-line UPDATE is slow by slow transformation

  In Oracle no other session can 'see' upgrade from uncommitted changes.

  The only way to significantly reduce the elapsed time is to have only 1 UPDATE & 1 COMMIT!

• Driver Ethernet for Windows XP Home edition does not work on Satellite A100

  Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

  As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

  Hello

  I can't believe that you are not able to install the LAN on this Satellite A100 driver!

  However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

  If you want you can download and install page Intel network driver:

  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

  You will find the drivers Intel 8256 x Ethernet controllers

  Good bye

• AutoCAD release 12 runnability in w/service pack 3 for Windows XP Home Edition

  trying to run autocad release 12, a 16-bit application in Windows XP home edition with service pack 3.   After installing the program... and when you try to start autocad... Get the error message saying "division by zero or overflow error" How can I run the 16-bit program in XP which is 32 bit?  Thank you

  I know it's a little late, but in case someone tries to run CAD r12, this link may provide some information... http://forums.autodesk.com/t5/AutoCAD-R12-R13-R14-Archive/Divide-by-Zero-or-Overflow-Error-AutoCad-12/td-p/1368

  Version 12 is from the days of MS-DOS; We used to get these errors then too, but it is a long time ago and I don't remember what the fix was at the time. However, you can try to install a Virutal Machine DOS or Windows Virtual PC.

• Peut-32-bit Windows XP Home Edition on a 64-bit computer?

  32-bit Windows XP Home edition with service pack 3 can be installed on a 64 bit system?

  Hello

  Yes, you can install Windows XP 32 bit edition on 64-bit processor computer.

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Note: Above article also applies to Windows XP operating systems.

• Install Windows XP Home Edition, the lack of CD

  I want to use window xp home edition key given with my laptop for install xp widow, while the CD is missing

  Please see: How to replace Microsoft software

• Old license Windows XP Home Edition (HP) is not valid

  Hi guys,.

  I recently had to format & reinstall the pc of my father, who has a sticker of xp of windows with the license on this subject.

  The sticker says "Windows XP Home Edition HP", but when I try to install WinXP with this license, he said that the license is not valid.

  I used the WinXP it SP3 CD, because I can't find the original CD of Windows XP without Service Pack anywhere,.

  is this the problem or can I use an old XP license it to install XP SP3 it?

  If this isn't the problem, could someone help me know what is the problem?

  Thanks in advance,

  Dave

  What is the make and model of this PC?

  It is important that the media matches the license. So, if the license is an OEM version of XP Home, only an OEM XP Home CD work. A XP Home retail CD are bad media.

  Assuming that you have the correct CD, make sure you enter all characters correctly. Make sure that you enter not an 8 for a and B, for example.

• Cannot install game or applications in Windows 7 Home Edition computer.

  Original title: Windows Installer problems - Windows 7 Home Edition.

  I am running Windows 7 Home Edition 64-bit. I tried to install a game last night and at the start of the installer it disappears from the screen and I find myself with an icon in my taskbar tasks that wont open. Sometimes, if I'm lucky and let him go, he will open full screen and allow me to continue with the installation. I thought maybe it was just the game that I was installing. So I tried to install something else non-related and it appears the installer, but the bar never moves. I try to shut it down and he even used close. It will cancel, but even after I cancel, Setup is still used in the process. I've looked everywhere and cannot find a solution to this problem.

  I tried unsubscribing msiexec and re-enrollment it and no luck

  Hi Jmorris462,

  Did you change your computer before this problem?

  You can follow this link & check if the problem persists:

  How to solve the problems when you install or uninstall programs on a Windows computer?

  Hope the helps of information.

• Themes do not show in WIndows XP Home because Firefox 20.01.1 has been installed

  Themes don't show in my netbook Dell with Windows XP Home Edition, since Firefox 20.01.1 was installed a few days ago. I changed any of the settings and tried a number of different themes, none worked.

  Themes show very well in my computer Dell desktop and laptop running Firefox 20.01.1 with Windows XP Professional.

  Solutions?

  Make sure that you are not Firefox running in (permanent) private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

  When you're in private browsing mode, then the character is disabled and you get the default theme.

• I am running Windows XP Home Edition Service Pack 3 (build) 2600 and have a lot of problems.

  Hi all

  I am running Windows XP Home Edition Service Pack 3 (build) 2600 and have loads and loads of problems. Windows keeps hung and everything I tried didn't seem to help.
  I brought this second hand from a company computer, I used to work and I don't have the original installation cd or rescue disk. I meet a lot of problems and everything takes forever to load and work. I was advised to run maleware, spyware, antivirus and defrag on the computer analyses and I did all that and nothing works. Also, when I tried to run the system restore it wouldn't let me, and when I try to run the scan disk after a reboot it does not work. As a last effort, I tried running SFC and it looked as if it was working, but then it asked me for the initial startup disk, that I don't have. so I tried to cancel it, but now every time that I reboot/restart my computer load SFC and I have to start the entire process. Also, none of my cd drives work. Please help me
  Also, I'm now a message that says minimum virtual memory is very low.
  I would be very grateful for any help or advice anyone can offer us on these issues. a million thanks in advance.
  bfchild

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what exactly happens when you try to run the scan disk or system restore? You receive an error message? If yes then after return the exact error message.

  No software XP, Microsoft no longer offers that you will need to make arrangements for windows XP windows installation CD. You can check the question in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  See also the following articles that may be useful.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

• I use Windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  I use windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  original title: slow start
  • Faster processor.
  • Fastest hard drive.
  • Faster or more RAM/memory.
  • Less things loading at startup.
  • Appropriate and the most recent hardware device drivers.

  In XP, you can cleanup and optimize it in some way, by using the following tips:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are up-to-date and should work fine - there is another thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Impossible to install the new Windows XP Home edition from scratch on Tecra S3

  With F6 in WXP install driver Toshiba raid (from USB floppy drive) properly installed first, partionating disc ok, continue to install Windows XP Home edition.
  WXP wants then again Toshiba raid drivers, installing WXP because he's not reading USB floppy (undirected). Do I need the recovery CD that I don't have.

  Hi guys

  I had a similar problem installing RAID on my old Qosmio.
  I didn't use the restore CD but the simple Microsoft Windows Boot CD.
  The problem was my incorrect installation procedure.

  After the installation of the driver the USB FDD drive RAID, the configuration of the installation works fine until I formatted the HARD drive or partition.
  This has been bad! Don't format or delete the partition after installing the RAID driver!

  In addition, make sure you use the right set of RAID! These settings can be checked in the BIOS! My Qosmio user manual provides lots of information about RAID. Did you check your user manual which settings are required to install the OS of Win CD?

  Do and good luck!

• Why the Satellite A100 PSAAN drivers of Windows XP Home edition?

  I won't work with vista all the time but Toshiba makes me use all the time because they do not support drivers for Windows XP Home edition. And I have to work with WXP because vista does not work with some programs that I need and that is not good.

  I need them immediately and I still ask why the drivers for Windows XP Home edition are not there?

  [Edited by: admin on May 6, 2007 14:19]

  Hi Duge

  As you update and upgrade are typical in PC world and these processes have priority and are definitely looking to the future. Downgrade still isn't back. It is also important but has no priority as upgrade.

  I assume that upgrade supported for all mobile phones capable of Vista is not yet complete. I'm pretty sure that new notebook will build for Windows XP Home Edition, but it may take a little time. Be patient. You can also view other topics on this technical forum. You will find lots of useful information about OS downgrade.

  Bye and good luck!

• Tecra A2 - new drive HARD and have no idea of installing the drivers of Windows XP Home edition

  Hi all, have not been here in a while...

  Where should I start... Have Tecra A2 and the HARD drive died on this issue... was not able to recover whatever it's him so bought a new HARD drive.

  Rather than taking it to a repair shop, I would like to re - install Windows XP myself, save money and have a clean install.

  I know that I have to download the drivers from downloads for Tecra, but haven't a clue as to who and the most appropriate.
  Could someone be so kind and point me in the right direction to get my operating system again?

  Thank you.

  I agree with you. Do clean install of Windows XP Home edition and install all the drivers, Toshiba tools and utilities following this order of installations:

  Windows XP SP2
  Chipsets Intel (r) software installation utility
  Intel (r) 82852/82855 GM/GME Graphics Controller V6.14.10.3722
  TOSHIBA common modules
  TOSHIBA Hotkey Utility for display devices
  SigmaTel Audio WDM Driver
  ALPS Pointing-device Driver
  TOSHIBA-button On / Off Utility
  Launch and TOSHIBA Touch
  TOSHIBA Software Modem SM2138ALD04
  LAN driver
  Atheros wireless network adapter
  TOSHIBA Power Saver
  TOSHIBA utilities
  TOSHIBA console
  TOSHIBA controls
  TOSHIBA ConfigFree
  TOSHIBA PC Diagnostic Tool
  Driver DVD-RAM
  CD/DVD Drive Acoustic Silencer
  View of TOSHIBA for Ext.Monitor service

  I hope that everything will be OK and you will be able to use Windows XP Home on your Tecra again.
  If you have any other questions please let us know.

  Good luck!