Windows 7 L2TP VPN for Windows 2 k 8 RRAS

Similar Questions

• Disable ipsec for l2tp vpn connection?

  Hello

  How can I disable ipsec for l2tp vpn connection? I use a linux vpn that offers only l2tp. I remember doing this with winxp in regedit.

  [HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/RasMan/settings] "ProhibitIpSec" = DWORD: 00000001

  How is it possible in win7?

  Thank you.

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Linux and would be better suited to the community network. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• What units supported multiple incoming L2TP VPN connections?

  Hello. I have a Mac OS X Server I want to use as a VPN L2TP server for my remote Mac clients. There the Linksys routers that support multiple incoming L2TP connections? (Remote clients are 1 person per one place, so it won't be a problem with several outgoing VPN clients where they are).

  Thank you
  David

  Message edited by dmcheng on 14/09/2006 13:38

  
  

• Microsoft L2TP VPN to ASA 5520

  I am trying to configure an L2TP VPN connection on an XP laptop. On the SAA, I use the DefaultRAGroup and the DfltGrpPolicy. I put DefaultRAGroup to use a pre-shared key, and set the authentication of users on ACS_Radius. Our ACS server is associated with AD. Anyone know if I can use ACS to authenticate this user type or do I have to create local accounts on the SAA?

  When I try to connect from the laptop, I get error 789. On the ASA, I see this:

  Group = DefaultRAGroup, IP = 63.xxx.xxx.xxx, PHASE 1 COMPLETED

  Group = DefaultRAGroup, IP = 63.xxx.xxx.xxx, error QM WSF (P2 struct & 0xcddc7d28, mess id 0x46986b08).

  Group = DefaultRAGroup, IP = 63.xxx.xxx.xxx, peer of withdrawal of correlator table failed, no match!

  Group = DefaultRAGroup, username =, IP = 63.xxx.xxx.xxx, disconnected Session. Session type: IKE, duration: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: Phase 2 Mismatch

  On the one hand, it seems that the laptop is not sending the username and password. I've tried a lot of different combos on the side of microsoft MSCHAP and MSCHAPv2, both of them or all of them individually and matched this setting on the SAA. No matter what, I get the same error. Anyone have any ideas?

  Yes... I have never trusted guys for the configuration, I got the following errors:

  1 L2TP requires a mode of transport must be of the type of IPSEC traffic used, your config seems to refer to the one, yet it is not defined:

  Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set

  Transit mode TRANS_ESP_3DES_SHA<-(needed>

  2. the present set of transformation is not attached to dynamic cryptography so not used:

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  It should look like:

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA

  Finally, it is just to clear up, make sure that your server ACS_Radius is indeed enabled for authentication MS-CHAPv2 of ASA and the l2tp client, otherwise it will fail always.

• Chrombook L2TP/IPSec for ASA 5510

  Hello

  I have trouble getting a chromebook to establish a remote access connection VPN using L2TP/IPsec for a Cisco ASA 5510 12 7.2 (5) running.

  Run a debug crypto isakmp 5 I see the following logs (ip changed...)

  Jan 06 09:58:06 [IKEv1 DEBUG]: IP = 1.1.1.1, Oakley proposal is acceptable

  Jan 06 09:58:06 [IKEv1 DEBUG]: IP = 1.1.1.1, IKE SA proposal # 1, turn # 1 entry overall IKE acceptable matches # 4

  Jan 06 09:58:06 [IKEv1]: IP = 1.1.1.1, connection landed on tunnel_group DefaultRAGroup

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, status of automatic NAT detection: remote endpoint IS behind a NAT device this end is NOT behind a NAT device

  Jan 06 09:58:06 [IKEv1]: IP = 1.1.1.1, connection landed on tunnel_group DefaultRAGroup

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, previously allocated memory of liberation for permission-dn-attributes

  06 jan 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, PHASE 1 COMPLETED

  Jan 06 09:58:06 [IKEv1]: IP = 1.1.1.1, Keep-alive type for this connection: DPD

  Jan 06 09:58:06 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 1.1.1.1, timer to generate a new key to start P1: 8100 seconds.

  06 jan 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, PHASE 1 COMPLETED

  Jan 06 09:58:06 [IKEv1]: IP = 1.1.1.1, Keep-alive type for this connection: DPD

  Jan 06 09:58:06 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 1.1.1.1, timer to generate a new key to start P1: 8100 seconds.

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, data received in payload ID remote Proxy Host: address 3.3.3.3, 17 of the Protocol, Port 1701

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, data received in payload ID local Proxy Host: address 2.2.2.2, 17 of the Protocol, Port 1701

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, detected L2TP/IPSec session.

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, QM IsRekeyed its not found old addr

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, static checking Card Crypto, check card = outside_map, seq = 1...

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, static checking Card Crypto Card = outside_map, seq = 1, ACL does not proxy IDs src:1.1.1.1 dst: 2.2.2.2

  Jan 06 09:58:06 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 1.1.1.1, only Tunnel UDP-encapsulated and UDP-encapsulated-Transport mode NAT-Traversal-defined selection

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, remote peer IKE configured crypto card: outside_dyn_map0

  Jan 06 09:58:06 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 1.1.1.1, ITS processing IPSec payload

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, proposals of any IPSec security association has deemed unacceptable.

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, error QM WSF (P2 struct & 0x3d48800, mess id 0xce12c3dc).

  Jan 06 09:58:06 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 1.1.1.1, history of mistake IKE responder QM WSF (struct & 0x3d48800) , : QM_DONE EV_ERROR--> QM_BLD_MSG2 EV_NEGO_SA--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH

  Jan 06 09:58:06 [IKEv1]: Group = DefaultRAGroup, IP = 1.1.1.1, removing counterpart table correlator failed, no match!

  1.1.1.1 = address remote chromebook NAT

  2.2.2.2 = ASA 5510 acting as distance termintaion access point

  3.3.3.3 = Chromebook private address

  I noticed that the Chromebook is appearing as the ID of the remote proxy but later, he seeks the applied to the Chromebook NAT address.  Not sure if this is the cause or how to solve this problem, if it is.

  Can someone advise please

  Thank you

  Ryan

  7.2 is old code.  You can re - test with 9.0.x or 9.1.x.

  https://support.Google.com/Chromebook/answer/1282338?hl=en

• What is a good VPN for Mac and iOS client?

  I want to identify a strong product of VPN for Mac and iOS.  I want something that is easy to install and maintain, and it's effective.

  Thank you

  This depends a lot on what you're trying to accomplish. Can elaborate you on why you think you need?

• What is the best vpn for OS 10

  What is the best VPN for my MacBook Pro running Yosemite

  The question is really not much sense.

  A VPN is not something that you install on a computer. It's a service that you connect to, as such, there is no better for a specific type of computer.

  What exactly you need to accomplish with a VPN?

  Usually, a VPN is used to connect to a remote network and use its resources, such as printers and servers, as if you were connected locally to them.

• Cannot open an L2TP VPN tunnel behind a router 806.

  This is the scenario:

  My ISP provider provides pppoE.

  When I connect a PC directly to the ADSL modem, I can open my L2TP VPN and VPN works fine and I am able to navigate.

  When I connect the PC behind 806, I get a private pool in 806 IP and I am able to navigate, but PC, I open my VPN L2TP software utility (same as before) and cannot open the VPN.

  Could you please tell me what config I shoul put in router to open the tunnel of 806 instead of op VPN software utility? The difference is that now 806 global IP gets rather od PC.

  So I know now tunnel should be open from the router, but I Don t know what I have lines shlould Add.

  Help, please!

  I thinkl you want is VPN passthrough, the answer to that is the version of the IOS, I think IOS version 12.2 and allows VPN Passthru especially. There is no other configuration required just to 12.2 or above

• Is there really a customer Cisco VPN for Linux? _Really? _

  Hello people,

  I finally after almost a brain aneurysm trying to think too hard I have my Cisco 881 - SEC - K9 router configured properly for a multi-point my Amazon Virtual Private Cloud IPSec VPN tunnel, so that the obstacle is finally spent, and I think that it has been a very important step in my life somehow. I never thought I'd see the day, I actually got my hands on a legitimate Cisco non - stink... uh... I mean, non-linksys router. Now I can't find a "client" VPN for Linux program. I am running a Xen Hypervisor environment on openSUSE Linux because it is the only Linux distribution that fills all my laborious requirements in a Linux server environment. It is also the most mature and sure Linux on this planet, making it the most significant Linux distribution for my research needs.  Using NetworkManager is not really an option for a Linux based server environment and OpenVPN is just too complicated to understand for my little tiny head.  I've heard of some mysterious "easy VPN", but after that hours of digging online there is no information on this subject, even the Cisco download link leads to a Page not found error.  I see a Linux VPN API for the AnyConnect program, but is it a real VPN client, or just an API?  It seems to want my money to download it, but I have no money nor I really know what it is because it's all closed, the secret-like source and I can not even find a simple README file on him explaining what it is exactly.  I'm just a developer of off-work software attempts to connect to my home for personal use router and I can not really afford to more than $ 1 million for a single program I will only need to download once in my life that should have been included with the router in the first place of the fork. I have that more volunteer will probably not yet able to understand how to use the program when even because I don't know anything about VPN connections, that's why I bought this router so I can try to figure it all out as part of the open source nonprofit, research, I am currently conducting.  Is there some sort of period of evaluation or trial for personal use? Which would be really good if I could at least know if I will be able to understand or not.  I hate throwing money when it is in such a shortage these days. Is there really no alternative to a Cisco router.  It is an absolute necessity for the things I'm trying to accomplish, so try to settle for something else and past with my life isn't really an option. No, it's something that I just need to raise its head on and finish.

  I may be a little too crazy in me for my own good, but I don't see why it should take so much money just to learn to do something for personal use, it is not really a skill that I would never use otherwise.  Wouldn't be great if Cisco did their VPN client open-source and free for the public to use and modify, improve, learn and to grow and bring the whole world together in a community? Even the source code to the discontinuous old Cisco VPN client could be used as a tool for learning valuable for some poor student hungry or developer of Open Source software somewhere trying to cope with Sauce and Ramen noodles noodles Ramen on toast (don't tell me you've never thought about it).  With the ripple effect, it would significantly improve sales over time, because it would open the door to a whole new market where could those who previously could not afford to participate now. That's the real power of Open Source. It creates a more skilled workforce for the future by contributing openly and share knowledge. What happens if the next big internet technology and the solution to the global tyranny - the solution to end all wars forever - locked in the mind of a software developer to unemployment, which could not afford to upgrade their software to router from cisco or access the software they need because he was source closed and required engage in a costly to download service contract?  It would be just terrible, wouldn't it?  I guess there is no way to ever know for sure. I guess I'd be as happy if a kind soul out there could tell me an alternative easy to use for one always on the VPN connection that is running in the background that does not require NetworkManager or having to spend days days searching in and trying to figure out some really poor or extremely complex documents?  I apologize for all the sentences run on posed as a question, but just a few serious mental exhaustion of this, being unemployed is a few people from hard work. I really could use a vacation.  Maybe a camping on the coast trip is in order after I get this job, that sounds nice, isn't it? Nothing like a summer storm on the beach to the ocean--away from technology - to refresh the mind.

  I won't step in all the discussions in there, but you might want to look into is vpnc and openconnect.

  The two opensource projects that seem to work with devices Cisco, for a long time, I've been a user of vpnc.

  http://www.infradead.org/openconnect/

  http://www.UNIX-AG.uni-kl.de/~Massar/vpnc/

  Looks like some of your questions, concerns should be directed to your Cisco rep.

  There is an AC for Linux client (component the GUI and CLI). If you have problems finding - get it from 'package' (for linux) file, which is essentially a zip.

• AnyConnect 3.0 supports IPSec VPN for remote access?

  Hello world

  I've read about Cisco AnyConnect 3.0 issues that it supports IPSec VPN for remote access:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html

  I downloaded and installed the Client AnyConnect Secure Mobility Client 3.0.0629, but I'm not able to get the IPSec VPN works. Also, it has no option to use the previous of Cisco IPSec VPN client PCF files.

  Can someone point me in the right direction to get IPSec VPN AnyConnect 3.0 work?

  Thank you in advance!

  Hello

  Takes AnyConnect support IPSEC from version 3.0, but only in combination with IKEv2.

  There is no option to use a CPF file with it and the config should be pushed through a profile Anyconnect.

  More information on this:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html#wp1325361

  You should also change the ASA config so that it accepts negotiations IKE v2:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/vpn_ike.html#wp1144572

  Kind regards

  Nicolas

• Access remote vpn for the cisco1841

  Hi all

  Can I have an example configuration of a vpn for remote access to work for cisco router 1800 series?

  My cisco 1800 series router already a site to site vpn, so can I still set up a vpn for remote access using the existing IKE policy?

  Is it true that cisco router do support 1 IKE policy? Pls advise. Thks in advance.

  what you have is correct

  the line of authentication that you mentioned on is to suggest that we use the local user database authentication

  If you have an external aaa server as Ganymede + or radius, you can specify that, instead of local, local, is a key word to suggest local authentication

  your local database would be so user name passwords what ever you store on the router as

  username cisco password cisco

  hope this helps

  If this answers your question please note this as responded to the benefit of users in the community

• Windows - Internet access, no split Tunnel L2TP VPN Clients does not

  Greetings!

  I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.

  I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.

  Here is the configuration:

  : Saved
  :
  ASA Version 1.0000 11
  !
  SGC hostname
  domain somewhere.com
  names of
  COMMENTS COMMENTS LAN 192.168.2.0 name description
  name 75.185.129.13 description of SGC - external INTERNAL ASA
  name 172.22.0.0 description of SITE1-LAN Ohio management network
  description of SITE2-LAN name 172.23.0.0 Lake Club Network
  name 172.24.0.0 description of training3-LAN network Southwood
  description of training3 - ASA 123.234.8.124 ASA Southwoods name
  INTERNAL name 192.168.10.0 network Local INTERNAL description
  description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
  description of Apollo name 192.168.10.4 INTERNAL domain controller
  description of DHD name 192.168.10.2 Access Point #1
  description of GDO name 192.168.10.3 Access Point #2
  description of Odyssey name 192.168.10.5 INTERNAL Test Server
  CMS internal description INTERNAL ASA name 192.168.10.1
  name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
  description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
  description of training3-VOICE name Southwood Voice Network 10.1.0.0
  name 172.25.0.0 description of training3-WIFI wireless Southwood
  !
  interface Vlan1
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  interface Vlan2
  nameif INSIDE
  security-level 100
  255.255.255.0 SGC-internal IP address
  !
  interface Vlan3
  nameif COMMENTS
  security-level 50
  IP 192.168.2.1 255.255.255.0
  !
  interface Ethernet0/0
  Time Warner Cable description
  !
  interface Ethernet0/1
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/2
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/3
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/4
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/5
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/6
  Description for Wireless AP Trunk Port
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/7
  Description for Wireless AP Trunk Port
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  boot system Disk0: / asa821-11 - k8.bin
  Disk0: / config.txt boot configuration
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS domain-lookup outside
  INTERNAL DNS domain-lookup
  DNS domain-lookup GUEST
  DNS server-group DefaultDNS
  Name-Server 4.2.2.2
  domain somewhere.com
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  DM_INLINE_TCP_1 tcp service object-group
  EQ port 3389 object
  port-object eq www
  EQ object of the https port
  EQ smtp port object
  the DM_INLINE_NETWORK_1 object-group network
  network-object SITE1-LAN 255.255.0.0
  network-object SITE2-LAN 255.255.0.0
  network-object training3-LAN 255.255.0.0
  object-group training3-GLOBAL network
  Southwood description Global Network
  network-object training3-LAN 255.255.0.0
  network-object training3-VOICE 255.255.0.0
  network-object training3-WIFI 255.255.0.0
  DM_INLINE_TCP_2 tcp service object-group
  EQ port 5900 object
  EQ object Port 5901
  object-group network INTERNAL GLOBAL
  Description Global INTERNAL Network
  network-object INTERNAL 255.255.255.0
  network-object INTERNALLY-VPN 255.255.255.0
  access-list outside_access note Pings allow
  outside_access list extended access permit icmp any CMS-external host
  access-list outside_access note that VNC for Camille
  outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
  access-list outside_access note INTERNAL Services
  outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
  DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
  access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
  access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
  access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
  access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
  access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
  access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
  access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
  no pager
  Enable logging
  exploitation forest asdm warnings
  Debugging trace record
  Outside 1500 MTU
  MTU 1500 INTERNAL
  MTU 1500 COMMENTS
  192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 623.bin
  enable ASDM history
  ARP timeout 14400
  Global 1 interface (outside)
  (INTERNAL) NAT 0 access-list sheep
  NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
  NAT (GUEST) 1 0.0.0.0 0.0.0.0
  5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
  3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
  public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
  public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
  public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
  5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
  Access-group outside_access in interface outside
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  RADIUS protocol AAA-server Apollo
  Apollo (INTERNAL) AAA-server Apollo
  Timeout 5
  key *.
  AAA authentication enable LOCAL console
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  Enable http server
  http 0.0.0.0 0.0.0.0 INTERNAL
  http 0.0.0.0 0.0.0.0 COMMENTS
  No snmp server location
  No snmp Server contact
  Community SNMP-server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
  correspondence address 1 card crypto outside_map INTERNAL SITE1
  card crypto outside_map 1 set of peer SITE1 - ASA
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  address for correspondence card crypto outside_map 2 INTERNAL training3
  outside_map 2 peer training3 - ASA crypto card game
  card crypto outside_map 2 game of transformation-ESP-3DES-SHA
  address for correspondence outside_map 3 card crypto INTERNAL SITE2
  game card crypto outside_map 3 peers SITE2 - ASA
  card crypto outside_map 3 game of transformation-ESP-3DES-SHA
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  delimiter group @.
  Telnet training3 - ASA 255.255.255.255 outside
  Telnet SITE2 - ASA 255.255.255.255 outside
  Telnet SITE1 - ASA 255.255.255.255 outside
  Telnet 0.0.0.0 0.0.0.0 INTERNAL
  Telnet 0.0.0.0 0.0.0.0 COMMENTS
  Telnet timeout 60
  SSH enable ibou
  SSH training3 - ASA 255.255.255.255 outside
  SSH SITE2 - ASA 255.255.255.255 outside
  SSH SITE1 - ASA 255.255.255.255 outside
  SSH 0.0.0.0 0.0.0.0 INTERNAL
  SSH 0.0.0.0 0.0.0.0 COMMENTS
  SSH timeout 60
  Console timeout 0
  access to the INTERNAL administration
  Hello to tunnel L2TP 100
  interface ID client DHCP-client to the outside
  dhcpd dns 4.2.2.1 4.2.2.2
  dhcpd ping_timeout 750
  dhcpd outside auto_config
  !
  address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
  dhcpd Apollo Odyssey interface INTERNAL dns
  dhcpd somewhere.com domain INTERNAL interface
  interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
  enable dhcpd INTERNAL
  !
  dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
  dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
  enable dhcpd COMMENTS
  !

  a basic threat threat detection
  statistical threat detection port
  Statistical threat detection Protocol
  Statistics-list of access threat detection
  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
  NTP server 192.43.244.18 prefer external source
  WebVPN
  allow outside
  CSD image disk0:/securedesktop-asa-3.4.2048.pkg
  SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
  enable SVC
  Group Policy DefaultRAGroup INTERNAL
  attributes of Group Policy DefaultRAGroup
  Server DNS 192.168.10.4 value
  Protocol-tunnel-VPN l2tp ipsec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
  value by default-domain somewhere.com
  Group Policy DefaultWEBVPNGroup INTERNAL
  attributes of Group Policy DefaultWEBVPNGroup
  VPN-tunnel-Protocol webvpn
  Group Policy DefaultL2LGroup INTERNAL
  attributes of Group Policy DefaultL2LGroup
  Protocol-tunnel-VPN IPSec l2tp ipsec
  Group Policy DefaultACVPNGroup INTERNAL
  attributes of Group Policy DefaultACVPNGroup
  VPN-tunnel-Protocol svc
  attributes of Group Policy DfltGrpPolicy
  value of 192.168.10.4 DNS Server 4.2.2.2
  VPN - 25 simultaneous connections
  VPN-idle-timeout no
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
  value by default-domain somewhere.com
  the value INTERNAL VPN address pools
  chip-removal-disconnect disable card
  WebVPN
  SVC keepalive no
  client of dpd-interval SVC no
  dpd-interval SVC bridge no
  value of customization DfltCustomization
  attributes global-tunnel-group DefaultRAGroup
  VPN INTERNAL address pool
  Group Policy - by default-DefaultRAGroup
  IPSec-attributes tunnel-group DefaultRAGroup
  pre-shared-key *.
  Disable ISAKMP keepalive
  tunnel-group DefaultRAGroup ppp-attributes
  No chap authentication
  no authentication ms-chap-v1
  ms-chap-v2 authentication
  attributes global-tunnel-group DefaultWEBVPNGroup
  VPN INTERNAL address pool
  Group Policy - by default-DefaultWEBVPNGroup
  tunnel-group 123.234.8.60 type ipsec-l2l
  IPSec-attributes tunnel-group 123.234.8.60
  pre-shared-key *.
  tunnel-group 123.234.8.124 type ipsec-l2l
  IPSec-attributes tunnel-group 123.234.8.124
  pre-shared-key *.
  tunnel-group 123.234.8.189 type ipsec-l2l
  IPSec-attributes tunnel-group 123.234.8.189
  pre-shared-key *.
  type tunnel-group DefaultACVPNGroup remote access
  attributes global-tunnel-group DefaultACVPNGroup
  VPN INTERNAL address pool
  Group Policy - by default-DefaultACVPNGroup
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the http
  inspect the they
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
  : end
  ASDM image disk0: / asdm - 623.bin
  ASDM location Camille 255.255.255.255 INTERNAL
  ASDM location INTERNAL CGT-external 255.255.255.255
  ASDM location INTERNAL SITE1-LAN 255.255.0.0
  ASDM location INTERNAL SITE2-LAN 255.255.0.0
  ASDM location INTERNAL training3-LAN 255.255.0.0
  ASDM location INTERNAL training3 - ASA 255.255.255.255
  ASDM location INTERNAL GDO 255.255.255.255
  ASDM location INTERNAL SITE1 - ASA 255.255.255.255
  ASDM location INTERNAL SITE2 - ASA 255.255.255.255
  ASDM location INTERNAL training3-VOICE 255.255.0.0
  ASDM location puppy 255.255.255.255 INTERNAL
  enable ASDM history

  I should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.

  You must configure * intercept-dhcp enable * in your group strategy:

  attributes of Group Policy DefaultRAGroup

  attributes of Group Policy DefaultRAGroup

  Server DNS 192.168.10.4 value
  Protocol-tunnel-VPN l2tp ipsec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
  value by default-domain somewhere.com

  Intercept-dhcp enable

  -Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked.  It is located on the Advanced tab of VPN client TCP/IP properties.   Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.

  Alex

• Implementation of VPN for INCOMING connections to my server running Windows 7

  I need to set up a private network virtual SERVER on my server on Windows 7 and can't find the information I need to do this. Can someone explain what I need to do. I have a fixed IP address for my cable modem.

  I need to set up a private network virtual SERVER on my server on Windows 7 and can't find the information I need to do this. Can someone explain what I need to do. I have a fixed IP address for my cable modem.

  See this article for help...

  http://Windows.Microsoft.com/en-us/Windows7/set-up-an-incoming-VPN-or-dial-up-connection

  Remember that for a PPTP VPN server you must forward/open the TCP 1723 Port through a firewall or a router to the PC server is behind. You must also make sure that the firewall or the router will pass traffic GRE protocol 47 . This is sometimes called PPTP Pass Through or VPN Pass Through the firewall or the router. Windows Firewall automatically communicates the GRE protocol traffic if you make an Exception for the Port TCP 1723.

  You can test it by running the test detailed in sections PPTP Ping and VPN traffic in this Cable Guy article.

  http://TechNet.Microsoft.com/en-us/library/bb877965.aspx

  You can download the tools, pptpsrv.exe and pptpclnt.exe to Microsoft or if you have an XP SP2 CD. To extract the programs on a PC Windows 7 open the CD and select open folder to view files in the AutoPlay window.

  Extra help...

  http://Windows.Microsoft.com/en-us/Windows7/why-am-I-having-problems-with-my-VPN-connection

  MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Y at - it a client AnyConnect VPN for Windows Mobile 6.5

  Hi people,

  I have a client using PDA based on Windows Mobile 6.5 and Windows CE. Is there a version of the AnyConnect VPN client for these devicese and in this case, where they are available for download?

  Best regards

  Peter

  Hi Peter,.

  There isn't a client available for mobile platforms. However, perhaps, they may work with SSL VPN on SAA... But however the browsers on these platforms are obsolete... (like BONE :-))

  Kind regards

  Sander

• Suggestions of VPN for Windows 7 and ASA 5510

  We currently have a VPN solution with an ASA5510 and the client to the PC using the Cisco VPN Client V5.0.07.0410.  This works for Windows XP SP3 and Windows 7, however, Windows 7 will not allow enable start before logon or disconnect VPN connection when Logging Off (i.e. the Windows logon properties are missing in the client configuration options).  Is there a fix for this VPN client?  What VPN upgrade options available, which will allow these options?

  Thank you very much for your suggestions!

  You must use the AnyConnect client. I got on to start the same kind of project and purchased a license key AnyConnect, they are the easiest option.

  Sent by Cisco Support technique iPad App