Windows 7 Pro 64 bit says that only 4.00 GB of RAM on 5.00 GB are usable... Why is this?

Similar Questions

• Y at - it a utility to run Windows XP Pro 32-bit handle its maximum of 4 GB of RAM?

  Just spent 1 GB of RAM 4 GB, windows XP Pro. When I boot it noted memory had changed. F1 to continue or F2 application for utility. I selected F1 and received a message on the config.sys file is corrupted. Do you have a ctr alt del; Exercised Windows and command ok. Computer closed down and had to go through the whole thing again. Don't want to stop again. Afraid I couldn't get it to the top. Is there a utility that I can run so that 32-bit system can manage its maximum memory off the 4 MB of Ram, I installed?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Why all my music photos and videos are empty in my windows media player? But other users on the pc have my stuff? all my libraries are empty, why is this?

  When I click on my icon of windows and run my mouse over the photos, documents, music, videos it shows empty &, but other users on my pc have all my stuff - why this? Why can't I find my stuff in its original location?

  Hi Stacie,

  1. how many user accounts that you use?

  2. do you have administrative privileges for the current user account?

  3. have you made changes on the computer before this problem?

  Follow the mentioned methods:

  Method 1:

  Run Windows Media Player troubleshooting utility library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  Add the folder to the library:

  Follow the link below:

  http://Windows.Microsoft.com/en-us/Windows7/include-folders-in-a-library

  Add items to the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/add-items-to-the-Windows-Media-Player-library

  I hope that the above information is useful!

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• While trying to install windows 7 pro 64-bit, as the files to try to finalize an error message appears and says that windows cannot manipulate files to work with the hardware in my computer

  Original title: Win hardware problem. 7 PRO

  Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.

  The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.

  -Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)

  Or they are corrupt, try to get a new copy and try again.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Running Windows 7 Pro, 64-bit and all empty and none of them exe icons only opens.

  I am running Windows 7 Pro, 64-bit Service Pack 1 installed and when start I had dozens of white on the bottom bar task icons by saying that no files have been associated to the program.  I hit cancel and cancelled all out.  All the .exe icons (shortcuts) are empty, all the program under all PROGRAMS icons are empty, and nothing does not open.  My documents on the desktop will BE open in word or excel, but not from the shortcut.  The regedit.exe will work not or open.

  Does anyone have a solution?  It happened yesterday, I restored to 10 October and my computer worked, so I turned it off.  This morning when I turned on he did it again.

  Thanks in advance for you help.

  Jim

  You have changed the exe file association.

  Follow the instructions here and getting on for exe. http://www.dougknox.com/XP/file_assoc.htm

  Note: You have posted to a forum that is completely different to your question/problem category. Your question has been moved to a forum category that matches it's better.

• Install windows xp pro 32-bit on pc that is already running Windows XP pro 64 bit. Product key does not work

  I have a windows xp pro 64 - bit PC. I would like to install windows xp pro sp3 32-bit. This is a PC that was used in our Engineering Department and now will be sent to a standard user in our society. I went through the installation and when I enter the product key on the COA label a message that is not valid. Do I need a different product key to install the 32-bit version of XP?

  A Windows XP 64-bit product key will not work with Windows XP 32-bit installation media.  You would need a genuine Windows XP 32 - bit product key. Carey Frisch

• Looking to download a 64-bit Microsoft Virtual PC version that works on Windows 7 Pro, 64-bit operating system.

  From what I've been able to 'collect', Microsoft Virtual PC may not be compatible with 64-bit operating systems, but if it is true, that I can't seem to find a version of downloadable copy of 32-bit that I can install on my HP Pro Book G3 450 who will install properly & appear in the "Programs and features" section of the control panel possibly listed as: "Windows Virtual PC.

  NOTE: my laptop operating system is: Windows 7 Pro, 64 bit.

  All the tips useful on this topic will be useful, & thanks, Chris Canfield.

  Microsoft provides two specific versions, Windows Virtual PC 32 and 64 bit for PC running Windows 7 32 or 64 bits respectively.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=3702

  You can use the 64-bit package to install and run 32 and 64-bit operating systems.

  Windows6. 1 KB958559 - x 64 - RefreshPkg.msu

  But you must install the package of law for your architecture.

• Intermittent USB mouse freeze on Windows 7 Pro 64-bit. Tested with several mice that work fine on other computers.

  I am having a frustrating problem where my Wired Optical mouse appears to 'freeze' for 10 seconds on my machine Windows 7 Pro 64-bit. Meanwhile, everything else on the computer works fine, including the keyboard (connected through PS2). The mouse does not seem to lose power because down the red LED stays on. At the end of the freeze period, I hear the sound of Windows to disconnect USB, but there is no error or windows pop-up ads of any kind on the screen.

  Some more info about the configuration:

  * Core i7 950 processor
  * 12 GB of RAM
  * Radeon HD4950 video card (or almost)
  * The main SSD drive
  * 2 external powered USB drives, 1 powered MIDI keyboard, 1 USB dongle
  * Windows experience score 7.3

  I tried things that did not work:

  • Turn off all the power management, including the management of power supply for USB, USB hubs-> suspend to win power, etc.
  • Permutation of mouse. The problem came with three different mouse from different manufacturers.
  • Try the mouse on different computers of W7 Pro. Confirmed that the mice are not the problem.
  • Disconnected all other USB devices except the mouse. Problem persists.
  • Uninstalled all the drivers for the mouse and use MS default drivers.
  • Installed the software Microsoft mouse & keyboard center.
  • Installed the software from the manufacturer (ie. logitech) specific mouse driver.
  • Tried every USB port, the front and back, on my computer, including USB3 vs USB2.
  • Scanned for malware (using Malwarebytes)
  • Search for viruses (using Nod32)

  I must point out that NO other devices are having problems on this computer. My external hard drives all work perfectly. My printer when I plug it, works great, like my USB dongle. My MIDI keyboard never loses connection. Even when I have my phone connected Android, which normally creates a huge noise if I unplug it, never disconnects even for a second. It is therefore clearly a kind of mouse problem.

  The problem seems to occur regardless of what I do, although it seems MORE common if I use actually the mouse. If I'm just typing (as I am now) it seems not really to happen. On the other hand, sometimes hours go with no problem and other time it happens literally every few seconds.

  Remove the check to "improve the accuracy of the printer" logic. I had two computers windows 7 x 64 that gives me the same problem. When I tried a wireless mouse, the problem disappeared. they do not use the windows controls.

• Windows 7 Pro 32 bit MS Windows 10 upgrade will offer only 32 bit or choice of 32-bit or 64-bit?

  I have Windows 7 Pro 32-bit my PC is 64 bit, can I switch to 10 64-bit Windows?

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7
  Click Install now
  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Windows 7 Pro 64 bit black screen with the mouse only on startup and nothing else

  Hi there, Windows 7 system recently froze on me when I tried to move a large file on a USB hard drive. I didn't was not able to close the file so I decided to stop my PC with the regular start-> Shut Down.

  Now when I try to turn on my computer, after the "starting Windows" and Microsoft report goes to a pure black screen with just a (mobile) mouse cursor, not keyboard commands or click right work (eg. ctrl + alt + delete does nothing).

  I tried to start in safe mode, safe mode with network, they do the same thing after the "Starting Windows" screen. Tried to boot with my Windows 7 Pro 64-bit installation disk so and entered commissioning repair - no problem. Tried system restore and it went successfully, however after clicking restart is again the same thing!

  It's really making me crazy, could someone please help me? I really want to reinstall Windows and lost my files (since I can't even in a form any Windows Installer interface I'm not able to do a repair).

  Thanks in advance for your suggestions!

  I will proceed to a re - install now, thanks anyway for your efforts

• Maximum memory for Pavilion DV7t special edition running Windows 7 pro 64-bit with Intel i7 Q720

  I have an entertainment 2009 Dv7t Special Edition running on Windows 7 64 bit with intention processor i7 Q720 @1 .60GZ. I have 8 G of ram now but need to go to the top. Can I put two 8 G in the slots. Read some reviews say the software works and Windows 7 pro 64-bit can take up to 132 G RAM, if that was even possible. I run two internal drives. But with the addition of the cloud and running photoshop on cloud too much memory is used, slow down the computer. You want to go to 16. Everybody does and no problem?

  Thank you

  Hello

  As mentioned previously, there are SEVERAL dv7t editions and special editions. We have dv7t-3000, 4000-dv7t... and it is very difficult to find the right plug. Please use the following link to find the product/model number:

  http://support.HP.com/us-en/document/c00033108

  Your machine could be the following:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  If so, the #4 on the following manual page it support 16 GB max:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  You can have 2 x 8 GB, no choice. Only a few portable computers that have 4 slots and supports up to 32 GB. No way on this earth at this time, you can find a laptop that supports the 132 Gb of RAM.

  Kind regards.

• HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

  Hello

  For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

  

  When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

  This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

  That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

  So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

  [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

  [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

  Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

  HI Varadar,

  You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

  Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

  What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

  I hope this helps,

  Charles

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install microsoft visual C++ 2005 on windows 8 pro 64-bit

  Hello to you all,.

  I recently updated my computer to windows 8 Pro 64-bit and today I had to install Matlab as I need it for my work.

  The first step in the Matlab installation process is about installing Microsoft Visual C++ 2005 Redistributable, but the progress of the installation stops with the bar very near the end. The progress bar stops moving (but continues to work the animation on this) and it is just there for something like 10 seconds, but there also two or three minutes. Then the installation window closes without any error or confirmation that the installation was successful. In the control panel appears an entry "Microsoft visual c ++ 2005" but it is, in fact, does not work. Installation of Matlab does not and if I start it again it's the same thing again.

  I tried to install C++ by Microsoft Web site directly, but the same problem occurs, and more no error report is given.

  any idea?

  Thank you very much

  Filippo

  P. S.

  Installation of a later version as the C++ 2010 or 2012 works very well, but Matlab seems very stubborn on the installation of the 2005 version...

  I have did this after 2.5 hours of web searching and try and - in case of failure.

  In the end I found a similar position here on the community where a 'fix it' program was proposed, a fact to solve the problems of installation/uninstallation. I don't have the page open more, but I'll post again here when I find.

  It should be noted, however, that the 'fix it' program did not find any problem on my machine, and he says that nothing has changed, but then I restarted the computer and ran the Setup again and this time it worked.

  At the end of the day, I don't know how this problem has been solved, it surely wasn't the reboot only as I restarted several times during the 2 hours that I've been sitting here, but nevertheless, it seems to be ok now.