Windows 7 recognize ethernet card

Similar Questions

• Dell 15 7000 series laptop computer Win10 not recognize ethernet card

  Internet connectivity only works wireless.  Direct connectivity (connecting the laptor with Cisco router using a string) has been working for a while and turns off, and WiFi takes over.

  Looks like Dell has the solution to this problem.  They tried all the ideas of sense usual and also changed the motherboard, but finally abandoned or left to fate.  There is no problem with Cisco EA3500 dual band router as I have other connected gadgets.  Tried with another another laptop (Dell, also), changing the string, tried different machines slot in the router.

  Computer laptop Dell 15 is still covered by the warranty.

  Can not Dell to fix this?

  Anyone experienced this problem and still living with her without Dell take initiatives to solve?

  Thank you

  Shankar

  Finally something works like Dell have tried to implement and almost given upward!  The trick is: just try to diagnose the problem with the 'disconnected' ethernet cable... once it is said cable not connected or any reason for not working, connect the cable and try again... it works... The problem is that you may need to continue to do so at regular intervals.  At least it works.  This is really unfortunate, Dell has no solution to this question and leaving be it resolved by users... Why?

• Windows 98 not reconizing card ethernet from another application what to do

  How can I get windows 98 to recognize a card ethernet to another version?

  Hello

  I wish to inform you that, Support for Windows 98 ended.

  I suggest that you follow the below mentioned link see the information on the life cycle of the product.

  http://support.Microsoft.com/lifecycle/?ln=en-us&P1=6898&x=11&y=14

  I hope that helps!

• Satellite 220cds: Win98SE does not recognize ethernet cardbus cards

  Hello

  can someone tell me why Win98se does not recognize my toshiba cardbus ethernet card?

  also, where can I find drivers?

  I really hope that someone can give me the answer!

  Best regards

  computerfreak

  Hello
  First, you must install the driver. I guess that you don't have the installation disc. You need to download a folder of your choice or to where you can find it, it may come as an exe file or a zip file. Install the driver and restarts. Once the driver is installed, you can insert the adapter. Windows98SE automatically installs the driver from your hardware, if a version conflict is displayed, select 'Yes' to use the new file and continue. Resart your computer.
  To find the driver you need, go to driverguide.com and register here, it's free, all you need is a valid email address to activate your account. Once you register with driverguide, check your e-mail and click on the validation link, it'll take you back to the website and you should already be connected, jump offers so that access you the page "welcome to driverguide", scroll down to the driver search wizard, choose your product type of device, in this case , NIC, you should be able to navigate from there and find your driver.
  Good luck!

• Windows XP update to sp3 does not recognize SDHC cards

  I can't get my computer to recognize SDHC cards (4 GB) media (tried using two different drives, which work on a different PC) after reformatting hard drive and a reinstallation of Windows XP that I have fully updated to SP3 before trying to use the multimedia card (this count and the reader can read the SDHC cards before). When I try to install the 923293 hotfix it says that it to an older version (SP2)

  Hello
  I suggest you run the fixit and see if it helps:
  http://support.Microsoft.com/kb/314634

  Also check out this link:
  http://support.Microsoft.com/kb/310575

  It will be useful.

• If I install a new mother/Hard Card Drive in my PC, will be Windows still recognize the PC & stay enabled?

  If I install a new mother/Hard Card Drive in my PC, will be Windows still recognize the PC & stay enabled? Can I clone the existing drive I use or make a new installation (preferred). Both old & news readers are SSD. The two motherboards are made by Asus. If I can't get Windows to activate - what should I do about it? Thank you in advance for your help!

  You may need to reactivate by phone, OEM licenses are not really intended to be transferred from the original motherboard it came with that.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 Ultimate HP ProBook 4530 s, can't see Ethernet card.

  I just installed a new OS and I can't get on the Internet to download all the drivers.  Apparently, the system doesn't see the Ethernet card.

  Drivers for this device are not installed. (Code 25)

  Location PCI Slot 5

  Regarding Realtek; Download Win7 and Server 2008 R2 Auto Installation program (SID: 1669850) site #5?

  I tried again and cannot 'save' on the HP site when you select the download button.

• Ethernet card Question (HP Probook 4525 s XT950UT) Windows 7

  Hello

  I am in College in the fall and my dorm has ports ethernet for internet usage. I did some research and found that I need to have an ethernet card installed to connect my laptop with an ethernet port. I have a port on my laptop, but I couldn't find the ethernet card in the--> network adapters Device Manager. I don't have Bluetooth (Personal Area Network), Bluetooth (RFCPMM TDI Protocol), Broadcom and Wifi Miniport to adapt. How will I know if I have an installed ethernet card and if I did, how I install one?

  Hello:

  Your laptop has a setting in the BIOS called LAN Power Save.

  When you are not connected to the a/c power and your laptop is not connected with an ethernet cable, your wired network card appears not in Device Manager, as it has been disabled in the BIOS to save batteries.

  You can connect a cable to the ethernet port on your and your wired adapter should come to life. If it isn't and you intend to have your laptop connected to the a/c power, when connected via the ethernet cable, just go into the BIOS and disable the LAN Power Save setting, and your wired adapter will always be present and available in the nursery of dev.

  Another common parameter in professional laptops from HP's BIOS is the LAN/WLAN, commissioning. When you connect to a wireless network, your wireless card automatically by turns and visa versa.

  If you don't want that to happen either, then disable the setting.

  Paul

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• Satellite 1730 - need driver for ethernet card

  Hello. I need driver for Toshiba S1730 for Windows Me ethernet card. Ethernet card deactivated in the BIOS or by button? Interface Ethernet not serving in Windows

  Hello

  As much as I know this unit has no Ethernet card onboard and there is a reason why it cannot be determined by the OS. I'm sorry.

  Good bye

• Ethernet card disappears after installing SP3 (T60 1951 - 45G)

  Hello!

  I updated my Windows XP with Service Pack 3 yesterday and now it seems my ethernet card has disappeared. i.e., it acts to it has been disabled in the BIOS (not appearing is not in Manager devices etc..). I tried entering BIOS, hide, start, restart, enable in the BIOS and new shoe but no luck. In another thread, I've seen update people complain of broken MS and a clean install could solve the problem.

  My question is if someone else had the same experience and if it is solvable without a clean install of a simplified SP3.

  My machine is a T60 1951 - 45G.

  Everything else seems to work fine by the way, but I'll post if I find additional problems.

  It is reported of SP3 break connectivity LAN/WAN on many laptops (TechNet) MSFN, MS forums. Not quite sure that the resolution is at this time and not quite certain that a new simplified installation of SP3 would be a fix for the problem. For some, SP3 disable WAN completely, while others issue with LAN. It seems that some drivers 'most recent' are the culprits.

  Before doing something drastic, try reinstalling the Lenovo LAN drivers to see if that fix it, otherwise you may just have to go back to SP2 (nothing wrong with it on an existing machine, otherwise it works without problems). SP3, after all, is above all a cumulative (but with 'new') update, so really there is no big reason for updating a working and XP - SP2 system with this new service pack update.

  On a side note, remember to check if installed KB941644 inadvertently as part of the update - it's a "fix" that is known to cause a number of problems of connectivity (insoluble).

  You can see here (MS XP questions) to see if there is a solution to your problem.

  Hope this clears up things

• Pavilion a130.no Ethernet card drivers?

  Friends,

  Working on an a130 Pavilion where the drive crashed suddenly, I need a driver for the ethernet card on this machine. Time is tight, so to speak, so I hope that I can find and have the PC online before Monday. Check the download page for this model does not work, here I find drivers for the graphics and sound cards, but no ethernet driver.

  Happier if you can send me this driver or can tell me where to find it for download.

  Best regards

  Hello:

  The form of State that your PC comes with Windows XP as operating system, correct?

  The motherboard plug indicates it has the chipset nForce 2.

  You will need to install the nForce 2 chipset driver that will load the network driver as well as other drivers of the motherboard.

  http://www.nvidia.com/object/nforce_udp_winxp_5.10.html

  Paul

• cRIO and synchronization with PC with 1588 on Ethernet card

  Hi all

  I want to synchronize my cRIO with my Windows 7 computer.

  -Is it possible to apply the Protocol of 1588 in two materials using the PC as master clock and cRIO as slave?

  -Where can I find examples?

  The goal is to acquire temperatures via modules OR-9212 and cRIO to communicate to the PC by putting in place a lighter version of the JENA Protocol.

  In the final architecture, I could have multiple cRIO.

  Requirement:

  Don't use NI 6682 H card or other

  Can use the NI Sync module

  Use on the borad ethernet card

  PC running Windows 7 with LV 2013

  cRIO-9067 under LV - RT 2015

  Hello

  This is a documentation on the implementation of the NTP Protocol on cRIO running Linux RT and the host computer with Windows

  -Installing and configuring NTP on Linus RT

  - How to configure a time server NTP on Windows

  Adrien

• HP Mini 110: Lack of Wifi/Ethernet card drivers

  I am currently having the same problem as the OP of this thread:

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/HP-mini-110-missing-network-adapter-driver-...

  Recently, I reformatted the HARD drive and installed a new version of Windows 7 Starter and could not find the right drivers for the wifi/ethernet cards to work.

  The hardware for the ethernet controller ID is:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04

  And the hardware for the network controller ID is:

  PCI\VEN_168C & DEV_002B & SUBSYS_30A11895 & REV_01

  Hello:

  What is the number of full model of your mini 110?

  The drivers you need are on the support page for your specific model.

  Driver Realtek Ethernet (LAN).

  PCI\VEN_10EC & DEV_8136

  Atheros Wireless LAN driver.

  PCI\VEN_168C & DEV_002B

• HP Pavilion g7-2004sd suitable for implementing SSD caching and upgrade ethernet card

  I intend to buy the laptop mentioned above, which comes with a 750 GB (5400 RPM) HDD, Windows 7 64-bit operating system.

  To make programs run faster, I want to do an upgrade of SSD with the Intel SSD 313 caching.

  The store where I buy the laptop does not support this, but I was told that the standard HP warranty is not null when done elsewhere. My question what is the best choice for caching, for example 20 GB (by the Intel SSD 313) or by implementing caching of Corsair SSD 60 GB, assuming that, on the motherboard, there is a space for installation of the caching.

  Is it also possible to upgrade the ethernet card and replace the default map with this one:

  Intel WiFi 300Mbps (6235 N) + Bluetooth 2.1, 2, 1 + EDR, 3.0, 3.0 + HS, 4.0 (WHEAT) (dual 2.4 Ghz & 5.0 Ghz band)

  to make the WiFi works best when more than one user.

  To be honest, I'm not sure that this system will support the caching of the WSSD.  Pagedownload of systems that caching of the WSSD to support have usually a driver Intel RST available under chipset on the software and drivers.  This feature is generally reserved for the final product lines more high as ultrabooks and some Envy laptops.

  Page 41 of this guide lists the available wlan modules that will work in this book.  If it is not in this list and was not ordered to HP, then the wlan card will not work.

  To be honest, looks like a Ultrabook as is this a more of what you are looking for because it comes with a cache of WSSD drive.  It does not list the technical details, but it appears when the customization of the laptop and it is not removable during the configuration of the laptop.