Windows 7 stuck at facility established after stopping

Similar Questions

• Windows 8 stuck in black screen after "making auto repairs.

  I had my HP laptop for five months. A few days ago that I opened the lid of my portable computer and it loaded and said "Configure automatic updates" at this stage, it was frozen. I held the power button down to do a hard restart. I turn it back on and it wouldn't start. I did a system refresh, defragment HDD, ran CCleaner and started in safe mode. At this point, the hard turned 100% use no matter what I did. I couldn't find a solution I did a system reset. He reset the whole PC and reinstalled Windows 8.  It got stuck in the facility to a black screen with just my mouse. I turned it off. Now when I turn on my laptop the screen goes black for about 15 seconds, then HP appears with "Automatic repair of preparation" below logo. It does this for about 20 seconds then the screen goes black. I left my computer for about 7 hours and the screen was always return. I do not have windows 8 CD or USB key. What can I do? Nobody here was willing to help with this problem, although there are a lot of Windows 8 users who have this. At this point, I am considering buying a Mac that I can't do it in the face of Windows 8. If someone could help me it would be apprciated. Thank you.

  I tried several repairs. I did a disk check by pressing F2 during the launch, and he said that the hard drive has failed. I contacted HP support and they are sending me a box to put my laptop in which I will return. So they will be replacing as there is somehow guaranteed on this subject. If someone experiences this problem, it is probably a hard disk crash. Good luck

• "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

  I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

  I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

  PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

  The best way for me to trouble?

  Hey punchcard4rjw,

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• Windows 7 stuck on the installation of the updates after the testore system

  HP Paviluon g7 1322nr Notebook PC

  Had to perform system restore, now Windows is stuck on installing update 3 of 177.  That is for more than one hour.

  In this case, run the tool in troubleshooting Windows Update from the link below and see if it works:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If the problem persists, reset your Windows Update components by following the instructions mentioned on the link below and try to download the updates again:
  https://support.Microsoft.com/en-us/KB/971058

  If the problem is still not resolved, run the system update readiness tool from the link below and see if it works:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  Hope this will help you.

• failure of Windows 10 with modern configuration host has stopped working

  Windows 7 pro I failure of windows 10 after download, download, then crossed the preparation... get updates... check your pc is where message appears "modern facility host has stopped working... a problem caused blocking the program working properly." Windows will close the program and notify you if a solution is available. »

  Cancel the update level or if necessary, hold the Power button to turn off the PC.  Wait a half hour, then power turn voltage to see if it continues or rear rollers.

  If it cancels and then work done these steps for overcome Windows Upgrade failure - Microsoft Community 10.

  If it crashes again and/or don't roll back you can try here, whatever the method works to access Advanced Startup Options in Windows 10 to see if you can get into Safe Mode troubleshooting options, Startup Repair, Go Back or Reset.

  But I would cut my losses and the vastly superior Clean install Windows 10 improvement who will be activated from the last version media after install as explained in the Wiki.  Be sure to start the media to remove all partitions to make cleaner as illustrated.

  If you have files that were backed up not you may rescue files when Windows does not start

  In return ask questions and let us know how it goes.

• 4540 proBook s does not start after stopping

  Brand new Probook s 4540, B7A48EA #BED, of the box. Memory 4 GB DDR3, 500 GB, processor i3, SUSE Linux disk.

  I have install the battery, connect the power supply and turn on laptop. Linux installation started, got the message 'creating recovery root tarball' and wait, wait and wait with the same message of Linux. I rebooted the laptop and after that got Linux message 'Cannot find size info part of recovery' and restarted itself, every 120 seconds.

  I turned it off, by pressing the power button / stop 5 sec.

  After that, I can't turn on laptop. When I press the power button / stop, power, drive, browser and Flash of LED wireless, you can hear disc trying to turn but fail and all the lights go out and about 2 seconds later all lights flash once again, drive tries to spin but fail again and laptop does not start.

  I have 'power reset', updated the BIOS (F.40), removed the drive and DVD drives, tried without battery but no change in behavior. I returned the drive and the original DVD. After removing the memory, portable lights, as if, and caps lock flashing of LED 3 times which means error memory. After that, I did a "reset power" once again, reinstall memory and try to start the laptop. After pressing the power button / stop at the beginning I had same symptoms I described, and after 2 portable seconds began. I installed Windows 7 Pro. Laptop computer can be restarted Windows, but after stopping, he can't press start button to start / stop.

  One way to start is to move the memory in the other slot, but it cannot start after his stop. After his return in the first memory location can be started again until the next stop. And when start, does not start from the beginning, but after 2 seconds, for his second try. The BIOS memory test, the EFI system diagnostic and memtest86 has errors. I tried with different memory module but got the same symptoms.

  Should I change a motherboard?

  After replacing the motherboard (systemboard), everything works.

• LAPTOP HP 15: BUTTON (F12) WIRELESS LED LIGHTS AMBER COLOR AFTER STOP OF THE LAPTOP

  THE BUTTON (F12) WIRELESS LIGHT AMBER COLOR AFTER STOP OF THE LAPTOP. THE AMBER LIGHT LIKE THAT AFTER PRESSING THE POWER BUTTON ON THE LAPTOP. MEWANS TI LAPTOP DON'T SE NOT GOOD SHUT DOWN ON GIVING THE STOP COMMAND. ASK FOR HELP ON THIS ISSUE TO YOU.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• Update Windows Vista stuck at 0%

  Whenever I update manually or system automatically triggers the update of Windows, it remains stuck at 0% even after 24 hours. It shows that 40 updates are available and even update yourself (as in 39-40 updates...) Addition of new updates) but when I choose to download a few stays at 0% download 0 KB.

  It was a month back work any fine or I tried to uninstall everything I've updated / installed during the month. Also when I try manually update any application Windows (by microsoft related to the Windows operating system) he moved as well. For example if I choose to manually install IE8 stuck to "Installation of the basic elements. 

  
  

  How can I get rid of this problem? Esomething else is working well, browsing, downloading, speed.

  
  

  I use Windows VISTA Business on a Sony Vaio CS-36

  Asif Siddiqi

  Dear Samhrutha G,.

  Thank you for your response. However, I understood the question. I had to uninstall Microsoft Security Essential to put everything to normal.
  Now everything works fine.
  Thank you for your prompt update.
  Kind regards
  Asif

  Asif Siddiqi

• Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

  Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

  It won't let me choose a mode which worked well, it is stuck on "Start windows normally" for 20 seconds.

  Hello

  Restore the system from the recovery console and check.

• Windows Vista will not be validated after clean install

  Windows key, title: product original vesta H P,.

  buy windows key, product vesta p h, it will not be validated after a clean installation, only to discover, to upgrade only, that cost me $ 160 in two, three years ago, can aney help, how to fix this, davie.

  Hi David,

  Install and activate the original operating system provided with the computer first (I guess it's XP).

  Update to upgrade to Vista, then use the Vista product key that you used at the time to update (because it works now as you WILL upgrade and do not try to install only a facility full after an installed clean).

  Good luck!

  Kosh

• New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

  New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

  Monastir,

  What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

  Dell-Jesse

• Windows vista stuck in mode hibernation, then received error/BOOT/BCD file.

  Windows vista stuck in mode hibernation, then received file error/BOOT/BCD, Oxc000014c of the State. I inserted the Windows Vista disc to plant but it goes back to the previous message.

  Hello

  Turn off the computer if it has not been extinguished because it started and wait 5 minutes so there
  is a complete reset of the material.

  See if this applies:

  Error message when you resume a Windows Vista Service Pack 1 or Windows Server-based
  2008-based computer after hibernation: "Windows failed to Start.
  http://support.Microsoft.com/kb/95752

  ----------------------------------------------------------------------------------------------------------

  More troubleshooting:

  / Settings (BIOS/CMOS) often F2 so watch the screen as it starts - set boot order for
  1 CD/DVD so it can boot the disk - you don't want to not install Windows - you want to repair.
  Don't forget to put it on hard drive first of all when you do not want to start on the DVD.

  Try the Startup Repair tool

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try Options recovery or a disk of Vista startup repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  ----------------------------------------------------

  If the above didn't help:

  At the prompt of the startup disk:

  Bootrec /fixmbr

  then

  Bootrec /fixboot

  See if you can boot from the hard disk

  If this isn't the case, restart on Windows drive:

  At the prompt of the startup disk:

  CHKDSK C: /f /r

  ----------------------------------------------------

  If necessary this 'peut' help: (not the same error however it may be useful)

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
  required information.
  http://support.Microsoft.com/kb/927391

  ==============================================================

  If no help, the assistance of a computer store real (not the leeks and glances at a Best Buy or another Big
  Box stores) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Update stuck at 'Check updates'

  Original title: Windows Update stuck

  I had to recover my laptop windows 7 back to out-of-box state system. Once presented to my office, I immediately went to Windows Update to install all of the updates that I needed. After installing SP1, and restart the computer, windows update to update the update agent, so he could get some more updates. He said he would close and re - open Windows Update, which she did, but now it is stuck on "check updates".

  The update that broke the update of Windows was "Windows Update Agent 7.6.7600.320"

  I have since made a recovery of the system to the State out-of-box three times and each time "Windows Update Agent 7.6.7600.320" installs Windows Update is stuck saying "check updates".

  I did tons of attempts to solve this problem, but it won't find more updates and I can't install more updates.

  I have also experienced problems with Windows Update still looking for updates when Windows Update 7.6.7600.320 has been installed automatically after the system update to SP1 (it was after doing a clean install of Windows 7).

  The following worked for me:

  1. manually installing KB3083710

  2. manually installing KB3102810

  3. restart the computer

  4. run the Windows Update Diagnostic tool to reset Windows Update (support.microsoft.com/en-us/kb/971058)

  5 restart the computer again and search for updates

• Updates Windows 7 stuck in verification mode

  After a dismal upgrading to W10, I decided to restore on W7.  Everything is fine, but updates are glued to the verification mode.  I waited hours, tried tools, checked computer files for corruption, the FixIt Windows thingy... nothing worked.  I can't try a bunch of command prompts or removing and reinstalling stuff more things.  Someone has another help or am I screwed because Microsoft deliberately sabotaging W7?  Frustrated!   Thank you.

  You have two options here.

  Option 1 - use a guide to solve the problem

  You can read my wiki article on how to solve this specific problem. Attention, it requires technical skills to some extent. That being said, here is the link:

  Windows Update stuck on "checking for updates... ».

  Option 2 - use the Roll-Up of the Windows Update

  Recently, Microsoft has packed all the updates of Windows 7 over the past five years in a single, easy-to-install package. Instead of spending hours trying to install updates 200 +, just install the roll-up and make. Personally, I would say this to option 1. I wrote an article of wiki for more details. Here is the link:

  Using the convenience of Windows 7 cumulative hotfix (SP2)

• Windows 7 stuck loading at the Welcome screen

  -Loading of Windows 7 stuck on the Welcome screen

  -Only works on Safe Mode, safe mode with network works well

  -Starting repairs na not

  -I don't have a Windows 7 CD or the HP recovery CD

  -I've never had viruses or malware or connect USB drives for this laptop

  I got a blue screen down yesterday (no external connected device), after which Windows does not go beyond the loading screen. I have not installed the new drivers and programs recent. The last thing I've updated some Adobe applications ended a month ago but my latop working well at all until this blue screen suddenly. It is also the first blue screen crash in like 2 years.

  What has not worked:

  Start by using last good configuration, under the main boot menu

  Uninstalling the drivers I thought to be the cause, in safe mode

  Msconfig: Disable everything under services and startup

  PROMT command: Sfc/Scannow

  My system does not display the restore points

  However, I found restore factore default but that's the last thing that I want to try because I have to do my music and adobe production apps back will cost a lot of time and data.

  Norton Bootable Recovery Tool will fix the problem?

  Product name: HP Pavilion DV6 Notebook PC
  Operating system: Microsoft Windows 7 (64-bit)

  I have no am HP recovery CD or a CD with Windows 7. Traore is something else I can try without having to go through the service center because it's a wind

  I asked the Norton Bootable Recovery Tool in my original post. Or maybe Windows 7 installation of a flash drive? Or anything from the command prompt

  Also, how can I connect USB devices in safe mode? It does not appear

  You can download the ISO image of Windows of oficial from here: https://www.microsoft.com/en-us/software-download/windows7