Windows 8 does NOT recognize that my Kodak 2650 printer all in one, it is vital to my business that it works

Similar Questions

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• my printer is a HP CP1700 and Windows 7 does not recognize that it is able to print 2 sides

  I just bought a Dell Inspiron.  It works very well except for my printer.  My HP color inkjet CP1700 printer is able to print 2 sides.  Windows 7 does not recognize that it is able to print both side and does not give me the option to enable printing two sides.

  Did you download the drivers from the HP website or just use Windows Update? Try using the software from here.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=33110&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=33103

  I hope this helps.

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• My computer windows 8 does not recognize my Canon's SELPHY PRINTER. What can I do?

  My new computer Windows 8 does not recognize my Canon SELPHY printer. What can I do?

  [Moved from comments]

  Hi Jan,

  1. What is the number of the Canon Selphy printer model?

  2. have you installed the drivers from the printer?

  3 have you tried to plug it into different USB ports?

  I understand that you are not able to connect printer Canon Selphy on Windows 8.

  Check if the device is detected in Device Manager.
  Follow these steps:
  a. on the desktop, press the Windows key + X , and then select Device Manager.
  b. expand Print Queues , and then right-click on the printer.
  c. Select Properties , and then check to see if the device works properly under device status.

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there is a problem with the drivers.

  Follow these methods and check if that helps.

  Method 1: It is easier to connect to a printer on Windows 8.  Simply plug the USB cable from your printer to a USB port available on your computer.  If the computer is not find the printer, then plug it into another USB port and verify.

  Some older printers can require additional information to complete the installation, so connect you using the Advanced Printer Setup.
  Reference: install a printer in Windows 8

  Method 2: If there are no printer drivers available for the printer, then I suggest you to install the driver in compatibility mode.
  Install the drivers in compatibility mode for Windows 7.

  Follow this link and install the drivers for the printer.

  http://www.USA.Canon.com/Cusa/support

  Check out the following link to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Reference: What to do if Windows can't find a device
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Follow the steps and let us know the results.   If you have any other questions, please post, we will be happy to help you.

• Windows Update does not recognize that Windows Vista SP2 is NOT installed.

  I have Windows Vista x 64 with SP1 and I defined updates on automatic.  However, it does recognize that the SP2 is not installed...  I'm afraid to try to install it manually after reading all the trouble with SP2 on this site.  Could you please tell me why the updates fails to recognize the SP2 is not installed and I have to do to solve it?  I'm not a master IT person, I just want my computer to be as up-to-date as possible.

  Thanks for the advice and any help I can get.

  Hi Alamogordo,

  Welcome to Microsoft Windows forums!

  Automatic updates would have tried to install sp2 and the installation was corrupt and failed.  So it will not try to reinstall. We have to uninstall sp2 to view update history and try to download and install manually.

  1. click on Start to type windows update in the start search box and click on enter

  2. click on view history of update and uninstall sp2 (kb948465)

  3. use the below given link to download sp2 (download to your desktop)

  4 http://www.microsoft.com/downloads/details.aspx?FamilyID=891ab806-2431-4d00-afa3-99ff6f22448d & displaylang = in & displaylang = in

  Follow these methods before installing sp2

  Method 1

  Try to put your computer in clean boot mode and check if the problem persists. To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  Steps to put your computer in a clean boot:

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.

  Method 2

  Run the system update tool

  System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. These contradictions may be caused by various hardware failures or can be caused by software problems. In some cases, these inconsistencies can affect the Windows Service store, and they can cause software updates not do not work. The system update tool attempts to resolve these inconsistencies.

  1. open the link http://support.microsoft.com/kb/947821 scroll through Microsoft Download Center where several links under this section.

  2. first link is for 32-bit operating system and the second is 64-bit.

  3. click on the appropriate link, then run it on your computer.

  4. Once completed, try to install sp2 through automatic updates

  5. in the case of a failure to install manually

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE STEPS ABOVE.

  Click Start, in the search box to start, type msconfig and press ENTER.
  Select Normal startup, and then press apply and OK

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system
  http://support.Microsoft.com/kb/947821

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  Try this and let us know the answer.

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 does not recognize that I am connected to my home wireless network.

  I've recently updated my desktop and my laptop at home for Win 7. I'm trying to set up a home network, but on my laptop, I can't change my home network location. Even though my laptop is connected to the internet via my wireless router, Windows don't think that I'm connected to a network. When I click on "connect to a network", it shows that I am connected to my wireless router. When I try to set up a home network on the laptop, it tells me I need to change the network location of the Public at home, but since he did not think that I am connected, it will not allow to do me this.  I searched the internet and worked through it for hours, but can't seem to find a solution to this problem.

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Windows 7: to connect to the Internet, a group home and by e-mail at the link above.
  

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 does not recognize an HP Laserjet 3600dn printer

  Download drivers fail.

  Thanks, my problem is that windows 7 created an "unspecified device" on the usb PORT of the printer, and would not recognize the driver I downloaded. I am just learning on Windows 7 and found that he lied when he said that he would 'automatically' recognize the printer (as it did on XP).  I had to add a PRINTER and select the USB port.  At the time he accepted the driver that I downloaded.  Thank you, again.

• My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  Just out of curiosity, why all these steps? Why not simply do step 9?

  1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

  2. I wanted to do some (possible) that your computer is not infected.

  Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

• Windows Movie Maker, Media Center, DVD Creator, does not recognize that I have an engraver of DVD/CD operation to date.

  I have a Dell with Windows XP Media Edition desk top. I was always able to create movies using Windows Movie Maker and also by Media Edition and burn them to a DVD and a CD even. I can play any CD or DVD in the readers, however, I can't save or burn more. I get error 19 asking me to make sure I have a recorder. Whatever program I am in does not recognize that I have a DVD/CD burner. I have uninstalled and reinstalled software, scanned the players only to discover that they are up-to-date and are working properly. Except that they are not work properly. I have a TSST corp DVD +-RW TS - H553A I do most of my record with. I have been to Fix Windows and he's always broke. Any ideas?

  I have a Dell with Windows XP Media Edition desk top. I was always able to create movies using Windows Movie Maker and also by Media Edition and burn them to a DVD and a CD even. I can play any CD or DVD in the readers, however, I can't save or burn more. I get error 19 asking me to make sure I have a recorder. Whatever program I am in does not recognize that I have a DVD/CD burner. I have uninstalled and reinstalled software, scanned the players only to discover that they are up-to-date and are working properly. Except that they are not work properly. I have a TSST corp DVD +-RW TS - H553A I do most of my record with. I have been to Fix Windows and he's always broke. Any ideas?

  =================================
  It is possible that you have a hardware problem with
  your burner but... the following article might
  be worth a visit:

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have already a CD in the drive, it can not extract the CD.

  When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have a CD in the drive, it already and can not extract the CD. The air play perfectly to the reader.

  Hello, BGNG,.

  This thread has been created in wrong forum; the Microsoft moderation team has moved this thread on the forums of programs .

• Cannot install the drivers for the Dell 725 of CD printer as the computer tells me that Windows 7 does not recognize

  I have a Dell InspironM5010 with Windows 7 installed and you want to use a Dell 725 printer with it. I have the CD with the drivers of the printer, but can not load as the computer tells me that Windows 7 does not recognize

  Original title: ask the community

  Your CD is too old, but you can be lucky...

  Is there a downloadable file here for your printer...

  http://www.Dell.com/support/troubleshooting/ca/en/cadhs1/product/Dell-725

  .. but this is for Windows 7 32-bit ONLY, and I have the feeling that your OS is 64-bit.

  Windows may have a driver somewhere see here for how to find...

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• After you have installed the Windows updates, my computer does not recognize that there is a disc in the DVD - ROM thing

  I had this problem for weeks and only recently someone told me that it is perhaps for this reason.
  I tried several things to fix, and one of those who created an error where when I clicked on drive E in Windows Explorer, it looks like:

  E:\ application not found

  So, in the end, I wiped my computer and everything on it and rebooted again.

  IT TOOK FOUR HOURS.

  So, I've set up the computer as I did when I got it 2 years ago, and everything was fine. I could insert a disc, it reads that and I was able to install my game, no problems.

  Now, I have reset everything up, and there are more than 2000 updates to update installed. So I did.

  SO NOW, after all this, which took another TWO HOURS - he does not all disks again.

  I play the Sims 3 - fiercely - and so I tried to re - install all my expansion packs, but it does not now.

  I DON'T want to make that whole process again and install all my games before updating Windows, because I believe, even if I did that, once I've updated, I can't play the game, because my laptop does not recognize that the game disc is there.

  Help, please.

  I spent so much money on these games, and I love them! I don't have the money to buy a new computer.

  I have a Lenovo Ideapad

  Core i5 Intel

  https://support.Microsoft.com/en-AU/KB/314060/en-us

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Windows-8-DVD-RW-application-not-found/d68931e4-82f1-4D04-830d-49478ead5dd8

  Your AutoPlay doesn't work maybe not properly.

• My laptop does not recognize that anything that is connected to the USB ports

  Help, please. My laptop does not recognize that anything that is connected to the USB ports.

  Moved from feedback

  Original title: problems with USB ports

  Hi Alba.

  1. who is the operating system installed on the computer?

  2. What is the brand and model of the computer?

  This issue may be caused if one of the following situations arises:

  • The currently loaded USB driver has become corrupt or unstable
  • Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
  • Windows may be missing other problems hardware or software updates
  • Your USB controllers may have become corrupt or unstable
  • External drive can enter selective suspend
  • Your PC motherboard may need updated drivers

  I suggest to connect the USB device to a different USB port and check.

  You can run the Fixit provided in the article and the Coachman.

  Reference:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  You can also try the steps in the link and check if it helps:

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply to Windows 7 as well

  Hope this information helps. Response with status so that we can help you.