Windows 8 sound balance corrupts sound
Hello
Looks like I solved the problem by replacing the helmets that use a 3.5 "with a USB one Jack. It seems that either there was a hardware failure with front and rear or some sort of sound bug.
Tags: Windows
Similar Questions
-
Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing
Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing
Hello
I have a Compaq Mini - about 3 years - and the noise disappeared today. The sound icon in the lower right corner of the screen disappeared.
In the device, other devices Manager screen is color yellow as is the Audio on Bus High Definition Audio device.
XP sounds and Audio devices Volume Control Panel tab no. Audio Device.
I think that the driver may be missing? I don't have the start up CD and don't know where or how, download the drivers of its replacement.
Any help is appreciated to get my sound back!
Hello:
This is the page for support and drivers for your laptop.
You can try reinstalling the audio driver XP from there.
-
How to change the Windows Vista sound recorder
Does anyone have information on how to editing can be done in sound recorder in Windows Vista, such as the removal of noise, etc. ?
You would not be able to change the sound by using the Windows Vista sound recorder after recording is done, you would need a different for that one application. In this case, you can instead to fix the problem before registration, you can refer to the link below to get instructions on how to reduce POPs, clicks or other distortions.
http://support.Microsoft.com/kb/936693
For more information about how to troubleshoot audio recording in Windows Vista, you can check the link below as well.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
-
I ve realtek speakers. The symbol of the speaker does not have a cross. I hear the windows starting sound/music, when starting. I looked in the playback options and drivers who are working very well. Only problem is the computer is not detecting my headphones or speakers, I m using Windows Vista Home premium. My speakers are on and was running at full volume, but when I go in the playback devices it says that speakers are not connected. The drivers work well, but I cannot listen to or hear any sound.Please help me about this
Somehow, the speaker jack is disabled on your machine.
- Open its in control Panel.
- On the read tab, highlight the icon speakers
- Click on the Properties button
- The box of the use of the device can be set to "disable this device.
Otherwise, I disable it, apply and activate, apply the setting.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
The Windows startup sound no longer plays
Windows 7, 64-bit by using Windows Update.
When I turn on the PC or restart the Windows startup sound does not play. This has nothing to do with the sounds of opening or closing session. We are talking sound startup only. Any other system sounds work fine.Any ideas on what's changed here to reach? Thank you.I agree. There is no solution to this problem so far.
The alleged answer above re Steamer Service from NVIDIA might work if you have the service running... but I did not.I always have this problem on a laptop Dell D830 using SigmaTel High Definition Audio. The last time when the startup sound has played once was after I did a registry cleaning. Since then he has not played again.All other sounds play fine.Convince me that it is not a registry problem! Someone at MS should know the answer. Come out, come out wherever you are. -
I have 2 USB microphones and I want to use both at the same time by using Windows 7 Sound Recorder software. How can I do?
Hello Paul,
Thanks for posting your query in Microsoft Community.
Windows does not give you an opportunity to have two recorders at the same time. If you want to record the sound using two microphones, in Windows 7, it is possible to set a single default device (Microphone) at some point of time.
Only some specialized software such as third party software that can help you to set up and use two recording devices. You can use your favorite search engine and search for the software to achieve this. Third party software warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.If you want two different microphones to record sound at the same time, then there is a connection adapter used to record with two devices in windows 7. These connectors / device sharing
help you in recording of two different microphones as in the registration of theatres or radio stations.Hope this information helps. Please return back incase of some Windows-related issues.
-
When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.
Hello
Thank you for the question to Microsoft Community. I'll give my best to help you.
1. don't you make changes to the computer before the show?
2. are you referring to the startup sound?
3. What is the brand and model of the computer?I suggest you try the steps from the following link:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems -
After changing hardware, started back in windows my sound stopped working
A week ago I tried to install Mac OS X on one of my hard drives added. I used two different methods. The first iBoot use and the second using Chameleon. During this process, I moved my video card since the second PCIe slot to the first and exchanged my typical (8GBX2) 16 GB of ram for a 4 GB stick as it was necessary to make the hackintosh. Long story short, I did not, and once I gave up my shenanigans and starts up in windows my sound is no longer used. I checked and it showed that my speakers connected to the back were disconnected. Plug the headphones into the front also will not work. I googled everything and have tried convenience store windows, uninstall the driver and re installation, replacing my hardware configuration to the way it was, System Restore, reset of the bios, deactivation and activation of the integrated sound card. I played with the settings of realtek and despite all efforts, nothing has worked. The speakers work as I the plugged into my iPhone and played the same music if their fine. However, the computer will play the sound through my video card to my TV via HDMI
Computing: construction (self)Windows 7 ultimate 64 bit16 GB of rami5-3450 3.10 GHz CPUASUS v series p8z77GeForce GTX 560Hello
It is a hardware problem. Somehow during the process of moving around of material you would probably hurt the sound card. I would contact the manufacturer of the sound card / computer for assistance.
-
My Windows Media Player is corrupted. How can I solve this problem?
Original title: H E L P
my windows media player is corrupted, how to fix?
You can download the latest version of windows media from microsoft.com player and then reinstall it should solve your problem.
-
Windows media player is corrupted. I want to uninstall and reinstall but can't.
Windows media player is corrupted. I want to uninstall and reinstall but can't.
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------------------
Then, if necessary:
Have you recently installed another player?
Reset your associations for WMP and IE.
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.html---------------------------------------------
Do this to reregister the Jscript.dll and Vbscript.dll files.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
type or copy and paste-> regsvr32 jscript.dll
Press entertype or copy and paste-> regsvr32 vbscript.dll
Press enterRestart and if all goes well, it will run now.
--------------------------------------------------------------
Have you recently added stores or ANY application from Stardock?
Using 64-bit Vista?
Can you think of recent things you did in WMP which could be the cause? You added another
reader recently or an add-on for WMP?When I try to use Windows Media Player 11, the program does not start, or some UI elements
are empty - a Mr Fixit
http://support.Microsoft.com/kb/925704/en-usMaybe something here
http://msmvps.com/blogs/chrisl/articles/17315.aspx
and here
http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspxCheck here the news of WMP11
http://zachd.com/PSS/PSS.html=================================
Update your Codec - get these
-Free - CCCP also get free tool of insurgents
http://CCCP-project.NET/
http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/FFDSHOW - free
http://sourceforge.NET/projects/ffdshow/Check here:
Plug-ins for Windows Media Player
http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx---------------------------------------
VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.
VLC - free
http://www.videolan.org/VLC/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Windows resource protection found corrupt files but was unable to solve some of them.
I have several problems with my computer; I used to have Skype and I bought a new logitech camera, but since I installed it I can't update of java, adobe, yahoo, etc. so I uninstall my camera to see if it was the problem, but since I did that Skype has not worked agaain, an apears to error saying that there is a problem with the package windows install , I have read in this forum and find I had need windows install clean up utility so I downloaded, but did not work, when I used comand promp and scan my computer this apears
Windows resource protection found corrupt files but was unable to solve some of them. Details can be found in CBS. Journal windir\logs\CBS\CBS.log. for example, C:\windows\Logs\CBS\CBS. Journal
C:\windows\sistem 32 >
can someone help me please! Thank you.
HI Margaret,
Thank you for your message.
Looks like you have a virus or malware causing corruption.
I suggest to update your Kaspersky Anti-virus definitions and run a full scan of the system.
Also, make sure here's you have the Vista disc in the drive when you run SFC, where it gets the correct file information.
Alternatively, you can try to perform a clean boot before you attempt to run SFC, to see if a startup program may conflict with it:
http://support.Microsoft.com/kb/929135
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /
Hello
This should help you.
You need to run as admin.
"How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista"
http://support.Microsoft.com/kb/928228
And if the problems cannot be fixed, you may need to do a repair upgrade installation.
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
See you soon.
-
sfc scannow windows resource protection found corrupt files but was not able to repair
Original title: sfc/scannow
Hello.
I tried to repair internet explore in windows vista with the command prompt
I've done sfc /scannnow and it gave me
Windows resource protection found corrupt files, but could not too distressed some of them
details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper
for example c:\windows\logs\cbs\cbs.log
I found them the corrupted files, but I have no idea on how to fix or remove.
UH how to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
don't tell me no how to fix or remove.
I have windows vista edition Home premium 64-bit service pack 2.
Hey Crystal
If they are difficult to pierce the CD to Windows Media Player 11 try these links below it should help them or at least show them in the right direction on how to burn a CD. Hope that helps some.
http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn
-
My DVD/CD driver drive HL-DT-ST DVDRAM GSA-T20N ATA Device cannot be loaded by Windows and can be corrupted (Code 39). How can I get the original device installed new driver if the CD/DVD drive does not work? It is available for download? Should it be first uninstalled and re - installed? A relative novice can handle?
Hello
Have you made changes on the computer before this problem?
I would suggest trying the following methods and check if it helps.
Method 1:
Update the driver for the CD/DVD drive and check if that helps.
Updated a hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 2:
Run the fixit for the following Microsoft Fixit and if it helps.
Your CD or DVD drive cannot read or write media:
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 3:
Uninstall and reinstall the CD/DVD driver and check if it helps.
Follow the steps to uninstall and re-install the drivers.
a. click on start toreduce this includes this im and then click Control Panel.
b. click system and Maintenance, click Systemand then click on Device Manager.
Note If Control Panel is in Classic view, double-click System, and then click Device Manager.Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.
c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
d. When you are prompted to confirm that you want to remove the device, click OK.
e. restart the computer.
Hope the information is useful.
-
Error 2738 - Windows Resource Protection found corrupt files
original title: error 2738
Windows resource protection found corrupt files but was unable to solve some of them. Details are provided in convertible bonds. Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log
Hello
see if that helps
Here's how to use the SFC command
the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228#appliesTo
How to analyze the log file, SFC.exe program generates the log file display
The program SFC.exe writes the details of each operation audit and each repair operation in the CBS.log file. Each SFC.exe program entry in this file has a [SR] tag. The CBS.log file is located in % windir%\Logs\CBS.
Note The Windows Modules Installer service written also in this log file. (The Windows Modules Installer service installs optional features, service packs and updates).
You can search for tags [SR] help locate SFC.exe program entries. For this type of research and to redirect the results to a text file, follow these steps:
- Click StartCollapse this includes this image
type cmd in the Search box, right-click cmd in the programs list, and then click run as administrator.
Collapse this includes this imageIf you are prompted for an administrator password or a confirmation, type your password, or click continue.
- Type the following command and press ENTER:findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt
If SFC detect major problems, you may need to do a repair installation
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
Cannot reinstall Windows Vista because the Windows.old file is corrupted.
I hope someone can help! I'm about to pull out my hair! :)
I have a laptop Dell Inspiron 1720, under Windows Vista Home Premium, with 3 GB of ram. SP2
I had problems with error messages
Here are some of the messages I was getting.
"Dell Quickset has stopped working"
"Windows Management Instrumentation has stopped working"
"The user profile service has stopped working".
"Windows Update has stopped working"
There were a couple more but I do not remember. They are all gave me the ability to check online for a solution I have chosen and the message would go for a while, but not forever.
I'm tired of dealing with him, so I used my Dell disk to reinstall Vista. I did not choose the repair option first. I chose to do a clean install. When I got to the last step where it says "Complete the Installation", it gave me an error message telling me that the "Windows.old" file is corrupted. I do not have wright the rest of the information down, but he told me to run the check disk utility. (I think it has been shown as chkdsk). I clicked 'OK' and the screen went black and stayed like that for an hour. I turned off the computer and repeat all the steps but always goes to the black screen and stops. I tried to use the fix and it found a problem immediately and that fixed it, but after reboot, same thing. Yesterday I ran again the repair option, and it still works today. All night and nothing. She is still ongoing as I type this message. My question is how to run disk utility to check without an operating system installed? Use the "Diagnostic" option when I boot the disk from Dell? Any ideas on how I can get reinstalled Vista?
Boot from the Dell cd and run diagnostics
Maybe you are looking for
-
No sound I have no sound on my computer (Windows XP). I installed audio driver with no result. What to do next?
-
notification and instant preview
Hi all is there a sampe notice and overide instant preview? as to prevent them from be triggered?
-
I cannot scroll with just the tap and slipped.
I can no longer scroll without going above the scroll bar.
-
Application of shortcut keys Windows 7 has stopped working
I saw the question of a person who has a similar problem with me. But I do not know how to solve it and I forgot when the issue comes out... and here are the details of the problems: Signature of the problem:Problem event name: BEXApplication name: H
-
How can I disable comments pen in Windows 8?
I use a Wacom Intuos 4 Tablet and I need to disable the pen comments like I did in Windows 7. Help, please!