Windows 8 stopped working not

Similar Questions

• Not Microsoft Windows - bar tasks or the Start button "register Microsoft windows not updated, (he is) Microsoft Windows has stopped working".

  On the computer startup, there is no button or the start task bar.  window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working."  I could get on the internet, but I have a blank desktop!  What should I do?  Re-stall the disc?  I have a tower HP w / Vista bought in 2008.  THX, Lizz

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
  Method 2.
  a. also, you can try again user account if the problem is resolved.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  b. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Let us know if that helps.

• iCloud for windows has stopped working - no data showing. Everyone knows this? Found a fix?

  iCloud for windows has stopped working - no data showing. Everyone knows this? Found a fix?

  I've recently upgraded to a Windows 10 laptop and have had problems with iCloud.  I can't access the photos at all - old hard drive Windows 7 accesses as before, except all my original photos (not Photostream - in folders) seem to have been deleted but it is now downloading Photostream when I activated my new laptop, but only back until June 2015.  However, other data seems OK - contacts, calendar, notes, etc.

• Equium A210 - Windows Explorer stops working

  I have a laptop Equium A210. Why does windows Explorer stop working and restart all the time?

  > Why windows Explorer does not work and restart all the time
  Who knows?  :|

  Maybe you have messed your OS and now OS doesn't function properly.
  Have you tried to restore the operating system from the recovery CD?

  If this isn't the case, then do it. The whole HARD drive will be formatted and the recovery CD to install the image of Toshiba which contains the OS, driver, utility and software tools extra.

  This should help.

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

• My computer keep saying windows has stopped working

  My computer keep saying windows has stopped working. What can I do to solve the problem?

  Hello

  1. for how long are you facing this problem?

  2. did you of recent changes made to your computer?

  3. what operating system you run on your computer?

  I suggest that you perform a clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows has stopped working. Window is to check a solution to the problem...

  I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Defender stop working after the malicious software removal tool

  I ran windows software and after this removal tool, my windows Defender stopped working says its turned off, but when I try to turn it on nothing happens

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If the problem persists, please after return.

• Explorer Windows has stopped working. Name of the damaged file: wmp.dll

  Original title: Windows Explorer has stopped working

  There seems to be a lot of discussion on this issue.  I tired some of the patches, but some of my numbers seem different from what other people have.  The problem is on my laptop.  I try to connect to my router and have internet access.  My office is a new computer with Windows 7 installed.

  When I try to open my network center and sharing on my laptop, the computer thinks for a while, and then I get the Windows Exporer stopped working window.

  ProblemEvent name: InPageCoFire

  Error state code: c000009c

  Type of media loopholes: 00000003

  Name of the damaged file: wmp.dll

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 4105

  Additional information 1: fd00

  Add information 2: ea6f5fe8924aaa756324d57f87834160

  Add information 3: fd00

  Add information 4: ea6f5fe8924aaa756324d57f87834160

  I am at a loss!

  Thank you

  Kevin.

  Hey Kevin,

  You will need to run the command above in the elevated command prompt.

  Refer to this step help: How to run a command with elevated privileges?

  After you run the command of high fashion, you should get the message, "" DLLRegisterServer in wmp.dll managed."

  Also, you can run the method 2 regardless of the success or failure of the method 1. Please try these methods first and see how it goes.

  Normally, it is appropriate to fix this problem by running SFC scan and you would not need to copy the file.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows has stopped working properly

  "" I have windows vista and when I try to surf the internet, after awhile, it appears as a small windows that says "windows has stopped working properly ' and it restarts not close windows. It started before this date sometimes more often until my pc broke down: it became a flashy blue screen with writing something like problem phsichical... damage discs and now I tried to format it but it seems like the same problem comes up... now I can't download it again up to a certain point It is stackable

  Looks like your system is good enough corupted.  I backup my data and restore the computer to factory settings.  The procedure for this varies from a make and model to another, but should be in the documentation for your computer.

  I hope this helps.  Good luck.

• Installer of Modules of Windows Vista - Windows has stopped working... Configuration 3 of 3 to 0%

  original title: Windows Vista Ugh.

  I have Windows Vista Home Premium on a laptop Gateway. I get the installer of Modules of Windows has stopped working and has been the error message closed as well as the configuration 3 of 3 0% starting upwards.  Thank God the restart of death cycle is no longer happens, but it always appears when I restart/start my computer.  I have tried almost everything that I found online to fix this, and yet I still have these questions. I can not install updates to Windows due to the fault of the Windows Modules Installer every 3 minutes and I can't install SP2 even when I tried the 64 bit version of stand alone for my computer.  I literally a novel of installs failed in my history of windows because of this update and I constantly receive error messages when you try to install the update SP2 failed. I don't know what else to try now that I tried the system restore, and none of the dates are far enough for these errors go away.  Help, please.

  Check here the answer to the similar problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/popup-box-says-Windows-module-installer-has/ae2fbeba-6f15-4676-8ddc-9cd926a79730

  Tom Ferguson

  PS

  I've seen many references to Vista but Vista ugh is new to me. ;-)

  TF

• Windows Explorer stops working whenever I have connect a USB flash drive and try to access

  Hello. I use Windows Vista.

  I had a particular problem. Whenever I have plug in a USB key and try and access it, I get a pop saying "Windows Explorer has stopped working." the file is closed. If I wait a long time (i.e. 10 seconds), I might be able to get into the drive without any problems, but even when there is no guarantee. The problem persists in each USB slot I use. In addition, it is not that the computer is not able to detect it. It can detect and identify that it is a USB flash drive. It's just that whenever I try to access (or the folders inside the flash player), windows Explorer stops working and restarts.

  Does anyone have this problem before? And any help is appreciated. Thank you.

  The mistake made reference the MSVCR80.dll, which is a Microsoft file, but it may be another third party file, causing the problem.

  DivX is installed?

  If so, can you uninstall DivX and see if the error resolves.

• I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is wrong?

  I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is happening, please help.

  Hello
   
  Follow the suggestions and see if it helps.
  Method 1
  You can check if the problem exists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  If the problem persists, you can uninstall and reinstall the game.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can provide the event logs in Event Viewer.

  You can provide the exact error in the Event Viewer logs to find out what caused the problem.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can also see the article for more information.
  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.