Windows experience index will not calculate my system performance

Similar Questions

• Windows experience index will not refresh

  I just installed 64-bit Windows 7 Professional (32 bit Home Premium) with a custom installation. I use aero, so when I went to check my Windows Experience index, I saw that it was 1.0 for both the graphics settings. I've updated my restarted graphics driver. Whenever I hit the button refresh index experience, its starts fine, but before finishing it said "Windows experience Index for your system could not be calculated." I tried the bios update, but that did not help. All my drivers are up-to-date. A way to solve this problem?

  Check your winsat.log file and see if it indicates that this is the error. You can delete the .xml files in the winsat DATA and starting from an elevated command prompt, try the formal line of command "winsat" without the quotes to see if it works that way. I found that my anti virus program (Kaspersky) blocked WEI to save the results. Disabeling Kaspersky did not. You need to uninstall, run WEI, then reinstall Kaspersky.

• Windows experience index does not work

  THE PROBLEM:
  When I try to run WEI (Windows experience index) I get this error message:
  "Windows Experience Index for your system could not be calculated.
  Could not measure the performance of storage. The temporary file necessary to perform work
  could not be placed on the drive. Unable to find a drive for the file. »

  Now of importance that I did to try to fix the problem, that nothing worked.
  Some facts related to the reason why the error occurs:
  1. my computer is a dual boot Vista and W7.
  2 WEI worked perfectly when I first installed W7.
  3 W7 is on B:\ drive. The Device Manager shows: System, starting, Active, dump, primary Partition
  4 when I started using W7, I noticed a lot of many duplicates of files in libraries.
  5. not knowing what was the role of the library, I have deleted many, if not all the files into it.
  6. Accordingly, I may be wrong deleted files than WEI needs to operate.
  7 there is no Winstat.exe anywhere on my computer
  8. I ran SFC and he finds errors, but running WEI always produces the same error message.
  Windows resource protection found corrupt files and to repair the.
  Details are provided in the
  CBS. Journal windir\Logs\CBS\CBS.log.
  For example C:\Windows\Logs\CBS\CBS.log
  9. However, strangely, it will run in the use of BACK: formal B:\Windows\system32>winsat
  10. the result is:
  Read 94,82 6.5 MB/s sequential 64.0 disc
  Random disk reading 16.0 1.83 MB/s 4.1

  After the quick fix for the problem of the text in Firefox, I hope there is an easy solution to this problem.

  Thanks for any help.

  Brian

  PA bear,

  Thanks for all the help.

  I decided to just leave things they way they are.

  Almost everything works perfectly on my computer now.

  And I learned that too much intervention can cause more problems.

  To devote more time to it is not a good use of my time or yours.

  I can't justify to devote more time to this.

  It would be preferable for you to spent time with someone who has a real problem.

  I can easily run WEI with a command prompt, it is therefore essential to set of WEI.

  Thanks again.

  Best regards

  Brian

• In Windows experience Index of my computer's processor performance are increased from 5.8 to 4.7.How can I increase this?

  This Windows experience index per second processor calculations

  1 don't get too concerned about the experience index itself, the methods used to determine these scores is rather crude and produce no good empirical results and should be used only as a general guide.

  Also, the algorithms used are sometimes modified to allow changes in the technology available so can produce slightly different results from a previous run.

  Finally even if the utility is supposed to be able to compensate for other tasks, so it can be influenced by other processor loads may produce lower figures. Make sure the system is in the same State when comparisons.

  Processor performance has limited options to improve. Have you ridden any new memory since the last test?

• Windows experience index - could not measure the performance of video playback

  Running win7 64 bit home edition

  NVIDIA GTX 280

  Creative x - fi gamer

  Asus p5n - d motherboard

  All drivers up to date

  BIOS update

  to update WMP

  has run sfc - no problem

  When I first ran WEI got a rating of 5.5. Since then, the only thing I changed is that I switched from AVG Antivirus Essentials antivirus window.

  I have not changed anything else.

  Here is my log:

  3050911 (1032) - winsat\logging.cpp:0815:-START 2010\6\7 10:02:21 -
  3050911 (1032) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 06cd76d6-9a1e-4a20-a433-d57eebb1c374
  3050911 (1032) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
  3050958 (1032) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
  3051005 (1032) - 4585: Watch dog system active
  3051005 (1032) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
  3051145 (1032) - winsat\main.cpp:2490: > DWM running.
  3051395 (1032) - winsat\main.cpp:2497: > turn off DWM.
  3051395 (1032) - 2470: > EMD service will be restored to the exit.
  3051613 (1032) - 0983: > read the active power as «8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c» mode
  3051613 (1032) - 2793: > power policy saved.
  3051691 (1032) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
  3051691 (1032) - winsat\main.cpp:2814: > policy set to maximum power.
  3052611 (1032) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
  3052611 (1032) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
  3052611 (1032) - winsat\main.cpp:1775: > Run Assessment features
  3052705 (1032) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock
  3064624 (1032) - winsat\processresults.cpp:4018: > wrote bandwidth video memory in the registry 63259100
  3064624 (1032) - winsat\main.cpp:2037: > DWM Assessment results treatment SUCCESS
  3064624 (1032) - winsat\main.cpp:1775: > Run Assessment d3d - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  3070801 (1032) - winsat\main.cpp:1775: > Run Assessment d3d - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  3076870 (1032) - winsat\main.cpp:1775: > Run Assessment d3d - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  3083156 (1032) - winsat\main.cpp:1775: > Run Assessment d3d - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  3089631 (1032) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  3095761 (1032) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  3101970 (1032) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  3108257 (1032) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  3114591 (1032) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomF4-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 150; 200; 241 - batchcnt C (50); C (200); C (300) - objs C (12); C (26); C (45) - noalpha-geomf4shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  3123140 (1032) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomV8-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75; 100; 120 - batchcnt C (25); C (100); C (150) - objs C (8); C (17); C (29) - noalpha-geomv8shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  3131298 (1032) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname CBuffer - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75 - batchcnt C (25) - objs C (8) - rendertotex 6 - rtdelta 3 - texpobj c (1) - cbuffershader - cbufa 2 - cbuff 5 - cbufp 6
  3137226 (1032) - winsat\main.cpp:1775: > Run Assessment mfmedia-input C:\Windows\Performance\WinSAT\winsat.wmv - nopmp
  3138833 (1032) - winsat\main.cpp:1775: > Run Assessment mediaex-input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg - dshow-video offscreen - audio mute - width 100 %m - height 100 %m - constrain - savereg - autoprofname - expfrmmin 270 - expfrmmax 300 - overrideframetype int2fps
  3145385 (1032) - winsat\main.cpp:1775: > Run Assessment mediaex-input c:\windows\performance\winsat\clip_1080_5sec_vc1_15mbps.wmv-video offscreen - audio mute - width 100 %m - height 100 %m - constrain - savereg - autoprofname - expfrmmin 135 - expfrmmax 150 - overrideframetype prog
  3152405 (1032) - winsat\main.cpp:1775: > Run Assessment mediaex-input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg - dshow-video offscreen - audio mute - width 100 %m - height 100 %m - constrain - savereg - autoprofname - expfrmmin 270 - expfrmmax 300 - overrideframetype int2fps
  3159113 (1032) - winsat\main.cpp:1775: > Run Assessment mediaex-input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg - dshow-video offscreen - audio mute - width 100 %m - height 100 %m - constrain - savereg - autoprofname - expfrmmin 135 - expfrmmax 150 - overrideframetype prog
  3165431 (1032) - winsat\main.cpp:1775: > Run Assessment mediaex-C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 entry-video offscreen - audio mute - width 100 %m - height 100 %m - constrain - savereg - autoprofname - expfrmmin 135 - expfrmmax 150 - overrideframetype prog
  3165946 (1032) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: mfplayer.cpp @ 1077 (Media Foundation: creative source): pResolver-> CreateObjectFromURL() failed (code 0x800700ea)
  3165946 (1032) - winsat\main.cpp:2056: > assessment mediaex FAILED because of an error
  3165946 (1032) - winsat\processresults.cpp:4018: > wrote bandwidth video memory in the registry 63259100
  3165946 (1032) - winsat\processresults.cpp:1253: check limited to jump StdDefPlayback.
  3165946 (1032) - winsat\processresults.cpp:1265: check limited to jump StdDefPlayback.
  3165946 (1032) - winsat\processresults.cpp:1480: > partition disk writes in register 0
  3165977 (1032) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
  3165993 (1032) - winsat\main.cpp:2855: > state restored power.
  3165993 (1032) - winsat\main.cpp:2870: > Successfully reenabled EMD.
  3166227 (1032) - winsat\main.cpp:2896: > SystemRoot Composition
  3166227 (1032) - winsat\watchdog.cpp:0311: Watch dog system shutdown
  3166227 (1032) - 4909: > exit value = 1.

  Thanks for any help you can provide.

  jmarsh07

  I do not know; I don't check the newspaper.

  But, my problem was solved.

  I made two changes before it was fixed.

  First of all, I added more RAM. But this was not (directly) affect or correct the problem.  In addition, I was running the same amount of RAM (2 GB) before without problem.

  Second, following the second installation I had made another change.  I had created a virtual disk and put the TEMP folder.

  The problem went away (performance index worked) after I changed the place of C: TEMP.  But, I also tested with her to the RAMDISK and it works.  However, after that I set the TEMP to C:\, I also increased the size of the Ramdisk of 350 MB to 1 GB.  It works fine now.

  So, maybe this might help someone.  Better than I could understand, the ability of the TEMP folder was too small for the test to be performed.  This seems to be the most logical explanation (by simple deduction).

  I'd be curious to know if others had the same problem and the solution.  Or, if one solution.  At least, I would have more certainty as to the cause of the problem.

• Issue of Windows Experience Index

  Hello everyone!

  Vista 64-bit, Nvidia GT240, entirely updated Lattu.

  Windows experience index does not note GRAPHICS and GAMING GRAPHICS (1.0). Normally, 5.8 and 5.8.Computer are functioning normally.

  Reinstall the driver Nvidia, System Restore, entirely restore computer, do not help.

  Any suggestion?

  Thank you in advance;

  Hello everyone!

  Vista 64-bit, Nvidia GT240, entirely updated Lattu.

  Windows experience index does not note GRAPHICS and GAMING GRAPHICS (1.0). Normally, 5.8 and 5.8.Computer are functioning normally.

  Reinstall the driver Nvidia, System Restore, entirely restore computer, do not help.

  Any suggestion?

  Thank you in advance;

  My suggestion to ignore completely the Windows Experience Index. It is planned to useless; what it tells you is based on averages, not on your computer and how to use it.

  You must judge your performance yourself. If it is satisfactory, great. If this isn't the case, then consider ways to improve it.

  I wish that Microsoft had never included Windows Experience Index in Windows 7.

• Satellite L655-11J - result of the memory of the Windows experience index

  The results are
  Processor: 6.9
  Memory RAM: 5.9
  Graphics: 6.7
  G game: 6.7
  Hard disk: 5.9 Toshiba mk5059GSXP

  The result of the memory is too low?

  Hey,.

  Why is the result of memory too low? The score is still good scores even other parts are better.

  In addition, the Windows experience index is not important in my opinion. You can see a few numbers at the end, but what to do with it? I don't see a reason to make such a test if I convinced and satisfied with my computer. Who care about these things other landmarks? ;)

• freezing of the Windows experience index

  Why my windows experience index gel when it comes to tuning windows media decoding? He did not this before 2 NVIDIA DRIVER updates. Also, I always have the conflict message viewing and listening with WMC. All of this has happened since my own upgrade to Windows 7. Never had any problems with XP. I tried various suggestions on the Web, but nothing helped.

  Hi Eleanordemontford,

  I suggest that you remove the entire file.

  1. Click Start menu and type run, and then in the dialog box run type %systemroot%\Performance\WinSAT\DataStore
  2. restart the computer and check.

  See also the link to the thread below.
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/6e282c8e-da82-49e5-9448-3fd91988efd2/

  Windows experience index
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-experience-index-understand-and-improve-your-computers-performance-in-Windows-Vista

  You can also check if the computer hangs after placing the computer in a clean boot state and check out them.
  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click restart.

  I hope this helps!

• System notes Windows Experience Index

  I am running Windows 7 Home premium with a GEFORCE 9600 GSO video card. Windows will not evaluate my Windows experience index. When I click the "rate this computer" button nothing happens. The system is running stable and all the drivers are current, but Windows does not attempt to rate the sytem at all. No error message appears. It simply doesn't react when you click the "rate this computer".

  Look for C:\Windows\Performance\WinSAT\winsat.log errors?

  Have you tried C:\Windows\Performance\WinSAT\DataStore\ of compensation?

• When you try to evaluate the performance of the computer of my PC for the first time in 64-bit Windows 7, I get an error message stating "Windows Experience Index for your system could not be calculated."

  The error message also indicates: "cannot complete the assessment. The assessment or other operation did not complete successfully. This is due to an error reported from the operating system, driver or any other element. »

  I did a full install new (custom) on two WD Raptors (10,00 RPM) RAID 0 (striped).  All used harware succeeded in Vista Ultimate o/s is first available.  Current material as follows:

  Windows 7 Professional 64 bit Build 7600 v6.1.7600
  EVGA nVidia nForce 780i SLI card mother ATX
  Intel Core 2 Extreme QX9650 processor
  8 GB (4x2Go) Patriot Extreme Performance Viper Series DDR2 PC2-6400 low latency memory twin Kit, SLI-Ready (with CL Timings of 4-4-4-12 @ 2.1V)
  2 x WD 150 GB 10 K rpm 16 MB SATA NCQ in RAID 0 (striped)
  Samsung 22 x DVDRW SATA Lightscribe
  750TX (750 watts) Corsair power supply
  2 x OC from BFG GeForce 8800GTS 512 MB GDDR3 video cards in SLI
  Map its Creative SB X - Fi XtremeGamer

  All PC settings are standard (ie: no overclocking component) and all windows updates are completed.  Latest drivers installed for the video & sound cards.  Last firmware & driver for optical drive installed also.

  Any ideas as to why I can't receive a rating system for Windows Experience Index with success?  Thank you

  Stuart

  OK, I was on the phone with support for about an hour.  Problem has been resolved.  Turn user account control either the lower or penultimate level.  This version fixes the problem!

• System crash when I run Windows Experience Index

  Original title: Windows experience index

  Hi, I bought a laptop HP Probook s 4530 2 days. my laptop is:

  Windows Ultimate 64-bit
  CPU: CI3 2350
  RAM: 4G
  And my laptop 2 graphics cards:
  1 ATI Radeon HD M 7470
  2-Intel HD 3000
  My problem is: when I run "Index Windows performance" my laptop will crash and the laptop computer monitor will be disabled. I have to hold the power button down until the laptop is turned off and the new. Please help me.

  Hello

  Did you follow the troubleshooting steps?

  If you did not follow the steps in the previous post, I suggest you to try and see if it helps.

  I would say as you to see the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• For XP Windows experience index. I can't find the SYSTEM MAINTENANCE AND after selecting the start and Control Panel.

  I'm following the steps to display the score of our computer trying to open the performance and tools by clicking the Start button, click Control Panel, clicking system and Maintenance , and then clicking Performance Information and Tools. However, I cannot locate the system and Maintenance icon so, therefore, cannot take place.  Maybe this does not apply to our computer?  Yes, we use IE8 and XP Professional.

  Windows XP does not include Windows Experience Index. It is only available in Vista/Win7.

  But there are other tests of performance that allows your computer to reference.

  http://www.CNET.com/topic-software/benchmarking.HTML?tag=Lia; Lcol

  This is a link to several assessment tests. Some are free, others are not.

  Have fun
  DWN2DV8

• Windows Experience Index problem: could not measure the performance of video playback

  My pc is not yet rated. When I click on rate appears on this computer, a msg error saying that Windows Experience Index for your system could not be calculated, could not measure the PERFORMANCE of VIDEO PLAYBACK. What should I do. Help, please

  Hello

  Here are a few things to check before launching performance index Windows (WEI).

  • Quit all running programs, and restart the computer before running the assessment (WEI).
  • Check with the manufacturer of the computer or the motherboard manufacturer for BIOS updates.
  • Make sure you have the latest Windows 7 compatible drivers for the graphics device installed (video card).
  • If you have any third-party media players installed, uninstall them until the end of the evaluation of the WEI.
  • If you have installed any third-party Media Codecs, try to uninstall them until the end of the evaluation of the WEI.

  Open Windows Explorer and navigate to the folder C:\WINDOWS\Performance\WinSAT .

  You should see the following 8 videos.

  2 files with .mp4 extension.

  3 files with the .mpg file extension.

  3 files with .wmv file extension.

  Double-click each of these files. They should open and play in Windows Media Player. These are the files that WEI runs video performance.

  One thing to remember is that the WEI score is only an indicator of the ability of the main components of hardware on the computer. It has no effect on the performance of the system.

  Tell us what you find.

  Concerning

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• = 1.0 Windows experience index

  My windows experience index is 1.0. It's so disappointing maybe it's because my graphics/video driver? What do you think? I went down my longs E5-411 of win8.1 for 32-bit win7 and it not there no video driver available online.

  

  your problem was caused by the downgrade your system has been designed with windows 8.1, others have tried what you're doing with some success, don't know what driver intel web page you tried, but I think it's called "Iris", but make sure that it is for the 32 bit Windows 7, since that is what you have installed , but again, you have not all controls function that gives windows 8.1 driver, so you may need other drivers from Intel, such that the "chipset" like just install an older version of windows will give you all the necessary drivers for your system default Windows 8.1 has a lot of hardware nerwer drivers in Windows 7 does not have.

  You can try to download driver Intel utility version 2 and running that to see what he can come home with no guarantee that it will work, but just a suggestion that she is a utility designed for updates from the intel driver, another program is called Slimdriver, it will scan your system for the necessary drivers and will locate and download them precision in my experience may be questionable, but it does not work as he says.