Windows explore guard stopping when I click my flash drive

Similar Questions

• SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

  Original title: Windows Explorer has stopped working when I click on network and sharing and also...

  Hello technical savvy people!

  Windows Explorer stops working when I click on network and sharing, and also when I click on system.

  -Otherwise, I rarely get this little automatic.
  But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
  nor know how my system!

  Can you suggest healings?
  Thank you for your attention,
  marlem388

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Hope this information helps.

• When you try to click on programs and features, updates of Windows or default programs, get error "Windows Explorer has stopped working"

  I have problems with the programs and features, windows update, and default programs. An error pops up - indicating windows Explorer has stopped working or windows Explorer restarts. Each window then closes. Can youhelp identify me what is happening?

  * original title - when I click on programs and features, update windows, said default programs windows Explorer has stopped working? Or reboot, then this window stops? What is going on? *

  Hi Mr. Minister,

  Your question is still there while in Safe Mode? If so, you try to run a SFC scan for troubleshooting the corrupted system files on your PC.

  To perform a scan of the SFC, follow the steps on the following link: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7

  Your computer may also be infected and needs to be cleaned in order to work properly. I suggest that you try the steps listed in the related post below with your question:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/f26f7291-d646-4870-864e-a31976df0011

  You can also try a clean boot troubleshooting method to see if it helps you solve your problem.

  I hope this helps.

• When right click on a folder, get the error message saying "Windows explorer has stop working.

  original title: Win 7

  Hi guys

  I have srs problem on my windows, I use win 7 ultimate x 64 and whenever I right click on my files, I will revive an error that says 'Windows explorer stop workin' and I have 3 option 'Search soultion' which do not and "Restart the Program", I always need to select it, and then win explore it will restart itself and also close all folders and programs, etc. "Debug".

  Please tell me what can I do to fix this bug

  Thanks for your time

  Hi hind Roselyne.

  Please see the next with a similar problem and possible, especially the SpiritX MS MVPthread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working-Windows-7-64/62494d49-fcf4-493e-a2a2-bc5e5ee7b65f

  I hope this helps!

• Why my internet explore stops when I click on certain links, when I'm on the web page of someones

  original title: slightly annoyed

  Why my internet explore stops when I click on certain links, when I'm on the web page of someones

  Hello

   
  What operating system is installed on your computer?
   
  What is the version of Internet Explorer you are using?
   
  Is there an error code or the message that if displayed when you click on a link in the browser?
   
  Check out the link and follow the steps.
  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why windows Explorer not stop on click with the right button on an entry

  When I try to right click (or remove a file by using the delete key) when, in windows Explorer, it freezes and says there is a problem, but no suggestion is provided as to what went wrong. I also have problems with Outlock with a similar problem and Excel when opening the start menu shortcuts! This means a new installation of Vista, or is this something easier than that?

  Hello

  1 how long you have been facing this problem?
  2. don't you make changes before the show?

  Method 1:
  Try to boot in safe mode and check if the problem persists.

  How to start in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  
  Method 2:
  I suggest you perform a clean boot and check:
  http://support.Microsoft.com/kb/929135
  Note: when the diagnostic is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 3:
  If this step does not help then you can perform a System File Checker on the computer and check if it works.

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.  You can check the link:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  You can also check the link provided and check:
  Explorer Windows stopped working
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  Method 4:
  If you have problems with Outlook and excel I suggest you send the request in the forums of office and check:
  http://answers.Microsoft.com/en-us/Office

• Windows Explorer has stopped working... then restart... only when I try to delete something!

  I'm running Windows Vista Business 2007.  I have not had problems with my computer until my computer has been infected with the Malware last week.  The malware has been removed.  The problem I have is when I try to delete a file, the shortcut on the desktop or do anything, I get a display box that appears and says "Windows Explorer has stopped working... Windows is looking for a solution to a problem." Then another presentation box appears and says "Windows Explorer restarts... "and it restarts.  The file will not be deleted. I tried to delete files in multiple places and using several methods of deletion (button Delete, right click and delete, move, delete, etc.)

  I tried many actions listed on the support forums and nothing has worked yet.  When I first upgraded to windows I had to turn off user account control because it was originally the System unstable and would not allow updates to install. I made on and off again, but it does nothing to help with that.

  ANY INFO on my problem would be greatly appreciated!

  Search for malware that were missed, as suggests.

  Many times when someone experiences this problem, it may be due to add-ons explore or shell extensions. Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.

  Try a clean boot, or boot into safe mode.  The behavior persists?

  Another option could be to consider the establishment of the hierarchy of the following registry keys in the registry:
  HKLM\Software\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe\
  In the explorer.exe key, create a REG_EXPAND_SZ value named DumpFolder and set the value to%systemdrive%\localdumpsdata.  Ensure that the %systemdrive%\localdumps file exists, and then cause the crash to happen.  It must be a dump file in %systemdrive%\localdumps. Download the dump on your SkyDrive file and provide a link.
  (Letter is an environment variable that represents the system drive, usually C:.)

• Error "Windows explore has stopped working" when you open the file in my documents

  Original title: opening a file in the folder my documents

  Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?

  Hi dalintn,

  1. What is the file format of the document?

  2. are you able to open documents from other locations?

  3. did you of recent changes on the computer?

  Check if the similar problem persists when you access the document from any other location on the computer.

  Method 1

  This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2

  If the previous step fails then I would suggest that you do clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer has stopped working error - I can't right click a folder on the desktop.

  This is my brother's computer, and they do not arrive in his account, only mine.  I have administrator rights, but it seems not to matter. This problem occurs only occasionally.  For example, I can right click on this text, copy it, then paste it.  However, if I go to the desktop and try right click on a folder to rename it, I get the error.  The error indicates that Windows Explorer has stopped working, when it says that it restarts, then the Office updates really quick. None of what I found in the forums have worked again this is why I started a new thread.  I think it might be a problem with the registry, then someone can please help me quickly find a solution?

  Note: I can not run as administrator command prompt because I can't right click, so I can't run sfc/scannow.

  We are volunteers here for the most part.

  It's a shame that we don't know anything about the distressed system but it was MS Answers owners have chosen to implement this community - do not ask basic system information when a new question is asked that make problems a lot time and frustrating.

  But now they way they choose to turn things around here.

  Maybe this will help you with your system of unspecified of brand and model with the release of unspecified Windows and Service Pack and unspecified install antivirus/antimalware:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and Windows stops threatening program.  Windows should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.

  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:
  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display.
  Choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

  Click on the header of column called Microsoft (it can be the way out of the right side of the screen) to sort the display (by clicking on the column heading in Microsoft) so all non Microsoft extensions are at the top and easy to see.  They will say 'No' and be marked in pink because they are not extensions Microsoft, something like this:

  

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  If you see extensions which do not have anything that is listed under Description, Version, product name, company or have special names that looks like they might be letters and numbers just randomly, you might want to look at these first.

  You can also Google the name of a suspect add-on and see if there is any success on the Explorer accidents or mistakes DEP and what other people have done about it.

  You can Google something like:

  Windows Explorer crash

  You must complete your suspect on behalf of adds on.

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition (right click).  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, then restart and test again to be sure.   You have disabled the last extension would be suspicious.

  You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.

  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list!

• Explorer Windows in Windows 7, do a right-click in 1 of the 4 causes of hard drives Windows Explorer to stop

  Win 7, Windows Explorer, right click in the right hand only, Panel 1 of 4 hard drives causes Windows Explorer to stop.  The disk in question has been removed from my previous XP machine and inserted in it and a lot of files of data on it.  The other three disks were new and white discs.  All are formatted with NTFS and the disk in question worked well in my previous XP machine.  I have noticed no other problems with the drive.  Any suggestions as to what may cause this weird behavior and what I can do about it?  Thank you, gmhope

  This could be a problem caused by an incompatibility between the different version of your bios on your xp machine. BIOS not all do the same things in the same way, I was taught that a hard drive from another machine may not work in another with a different bios. The bios needs flashing on the screen when you start, bios award, a commune is an example. If you start them both and they are both the same bios is not the cause, if they're differentmaybe that's the problem . If you no longer have your xp machine then it's not a way to say average ither.

  But I suggest that you try to browse the disk using something else then windows Explorer (to avoid problem explorer).

  Open the run command on your Start menu and type cmd this will open a command prompt.

  Once opened type in the letter of the drive then an example of the colon (e :))

  Pressing on enter you will now be in this drive, and then type dir and then press ENTER, this will bring up a list of files. If these steps work for you and are able to see the content of the file on your drive is intact, but there is a problem in Explorer that prevents you to use it.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle on the left.

• whenever I click on 'control panel' or 'computer', it displays "windows Explorer has stopped working". It does not display the display of the control panel.

  Whenever I want to check computer (memory) space available on each drive, click on the 'computer' logo, it does not display the response on the screen. Instead, it displays a screen with a message "Windows Explorer has stopped working" for a few minutes and then returns to the original display.  I get the same answer, whenever I click on the "control panel" logo  I need advice how to solve this problem. Thank you.

  Hello

  Did you change your computer?

  I suggest you follow the link (this also applies to windows vista)

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• Debug Assertion Failed - make a right click on a file causes Windows Explorer to stop working

  Make a right click on a file causes Windows Explorer to stop working and then turning it back on.

  Message I get is:

  The Degbug Assertion failed

  C:\Windows\explorer. EXE

  File: f:\dd\vctools\crt_bld\self_64_amd64\crt\src\memcyp_s.c

  Line: 62

  Expression: sizeInWords > = count

  I hope someone can help. Thanks in advance.

  Looks like a ShellExtension incompatible.

  Run ShellExView [1] and disable all NON-Microsoft extensions. If the error are gone select 3rd party addons 1 followed by the other to detect the addon that causes the problem.

  André

  [1] http://www.nirsoft.net/utils/shexview.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 7 error: "Windows Explorer has stopped working" when you try to connect to network shares.

  I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.

  An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.

  Press Win Logo key + R, type: fsmgmt.msc

  You see your own actions?

  If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• SE error message "Windows Explorer has stopped working" when you try to search for document files

  Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727

  When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!

  Please help me

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.

  Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.

  Hope this information helps.