Windows is stuck at the start... Need solution

Similar Questions

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• Windows 8 hang on the start menu.

  Hi, normally the way I use my laptop computer running windows 8 is when I wake up before you do anything, I would like on my computer. Only after I finished with the detergent and breakfast start using it. However, for the past 2 days, I am trying to use, the screen would be just stuck in the start menu. I couldn't click on icons could go to the bar (where all options are) on the right and I couldn't even Ctrl Alt Del. I have to restart the computer first before being able to use the computer. If there is a way to solve this problem, let me know, thank you very much.

  Matthew

  The info is in the wiki.  You run WPR and it will record all the data when it restarts your computer.  You will then take the file (it will be BIG) and upload it to onedrive or any other file sharing service.

  

• S90 stuck to the start screen

  My S90 is stuck at the start-up screen. It shows the screen of stand for hours now. If I change the switch it will not swtich off the phone, but it restart again to the start screen. What should I do with it?

  I felt that I could let it run out of battery, but I don't know how the phone can operate on a screen for single cabin with just the lenovo on-screen log. Also don't know if once I reboot it wouldn't have the same problem.

  Any advice how to fix this?

  
  

• The Cliq is stuck on the start screen.

  Hey guys, after a normal day of use with my Cliq from 07:00 I got around 17:00 and put it on the charger, as it was almost dead, I went to charge less than an hour with it and now it is stuck on the start screen of Motorola with the small black bar on the left. I charge my phone all night every night and do not use it much at all, but it lasts and I wasn't there to look at what had happened, so I don't know if there was any discrepancy prior software other than seeds from basic mentioned by others.

  Charles, you are still able to boot into Recovery Mode and learn the triangle with the exclamation point? If you can, press the keys ALT and L at the same time to access the Recovery Menu.

• I used to be able to open several windows 'my computer' in the start menu, now the ONLY way I can do it is via "window button + e;

  original title: opening of several "MyMachine" from the start menu

  I used to be able to open several windows 'my computer' in the start menu, now the ONLY way I can do that is by "window button + e"-I have played around with nothing works folder options.  Any help is appreciated!

  Hi Candygirl777,

  You can try! http://www.TomsHardware.com/Forum/99994-45-open-multiple-computer-Windows

• Stuck at the start-up screen

  Hi, I use Jdeveloper 12.1.3 and the extension of the ADF Mobile on Mac OS X Mavericks. iOS 7.1 and Xcode 5.1.1

  If I make an application with a HTML file and deploy Simulator iOS, the app works great.

  If I apply with an AMX-page the and deploy on iOS Simulator, the app is stuck at the start-up screen. "Loading...". »

  Any ideas? I tested the "Navigation" public sample and deploy and works very well.

  Concerning

  Thomas H

  I looked in the debugging using the iOS Simulator. The problem causing my problem was not supported for encoding. I used ISO-8859-15. Changed to UTF - 8.

  Thank you for you detrilles Sudipto link on debugging =)

  -Thomas H

• Windows updates stuck on the Windows start screen.

  Windows Home screen is stuck it just keep going along in a loop, with message configuring updates 3 of 3, this started after attempting to upgrade Windows 7 to Windows 10 I can't

  out of it, had driven myself crazy trying fixit please if anyone has a solution to this problem

  Please share, he just may save my sanity.

  Windows Update Fixit utility:
  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Try the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable third-party firewalls.

  Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

  J W Stuart: http://www.pagestart.com

• HP G6 Windows 8.1 sometimes stuck on the start up repair/diagnostic screen

  I have a Pavilion G6 accompanying win 8 and I've updated to 8.1.   Normally, works very well.  But sometimes if it is not stop properly, or after updates, it gets stuck in the rotating balls forever.   Usually after 3 stops forced, I get repair folollowed preparation of the diagnose sceens pc, and then it works when I select restart.    A few times I had to go through the process several times, but so far, it has always started.

  Any suggestions?

  Thank you.

  Some things you could try for now.

  Make a diagnosis via hard drive BIOS

  Restore the default settings of the BIOS

  http://support.HP.com/us-en/document/c02693833

  Run the Memtest86 to test your RAM from there, not the paid version:

  http://www.Memtest86.com/

  Consider changing your CMOS battery.

• Windows becomes white after the start

  I have windows vista. When comp. after windows startup, it takes about 2 min. then scren goes white with arrow always on the screen. If I pull up the Task Manager, it rises and I can do a few things, but not much. System Restore does not and if I try safe mode it just stops about 1 min after the start.

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

   

  If you cannot start the Explorer at all

  • Press Ctrl + Alt + Delete and choose Task Manager
  • Under the processes tab, click Show processes from all users to elevate to administrator
  • In the Task Manager, click the file menu and then click new task (run) and type cmd
  • Other things you can try typing
    

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore
    Rstrui

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll

  
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll
   

  Delete the folder and the settings of the Menu

  This will remove the settings are saved for each file that you visit. Also the order of the start menu.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  RD C:\$RECYCLE. BIN/s/q

   
  then repeat for each drive to change the drive letter, for example
   

  d:\$recycle Rd. BIN/s/q

   

  e:\$recycle Rd. BIN/s/q

   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  MD "% userprofile%\DesktopTest".

   

  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f

   

  MD "% public%\desktopTest".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f

   
  To restore default after having tested if begins to explore.
   

  Set ExpFix1 = % user

   

  Set ExpFix2 = % profile

   

  reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   

  Set ExpFix1 = % Pub

   

  Set ExpFix2 = % lic

   

  reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   
  You will need to disconnect then.
   
   

  New entry missing folder

   

  If the above does not help.

   

  Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.

   

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.

    

• Thunderbird is stuck on the start page of mail (Mac, Mavericks)

  Thunderbird has been working well on my Mac, but after the last update + restart, it seems to be stuck on the mail start page. Here is a screenshot: http://i.imgur.com/gKFjEaH.png

  When I click on 'read messages', it is said so "host contacted, the connection information," has no effect. I tried to drag the window from left to right to see if something is missing (it is not), see > > records > > all (it is already) and go > > folder > > my e-mail address > > Inbox (nothing happens).

  He can still send messages without a problem. I can't get to the Inbox.

  Any other ideas? Is this some sort of bug? Very much appreciated.

  Given that you cropped the image, I have to ask. The pane in what folders should appear seems to be present. You say that it's completely empty? Not even a single entry?

  If so,.
  Restart Thunderbird in the Help menu with the disabled modules and see if that solves the problem.

  Then, open the profile folder (there is a button in the troubleshooting information in the Help menu to do it.) close Thunderbird and delete or rename the files to panacea.dat ANDS foldertree.json

  If who disobeys, repeat and delete the session.json file. The first two are simply cache files. The last one contains some parameters of the interface as the reading pane is enabled or disabled and what tabs are open. Really, I don't think that it is an issue, but that he loss of settings is only slightly inconvenient if the other two don't work.

• Acer 10 switch SW05-011 reset Windows 10 stuck on the TPM Module

  Hello, I am trying to reset my Acer Switch 10 SW05-011 windows 10, but during the process, I'm stuck on this warning message:

  A configuration change was requested to clear TPM (Trusted Platform Module) computer

  WARNING: compensation erase the information stored on the TPM. You lose everything created leys and the access to data encrypted using these keys.

  Unfortunately, neither keyboard nor mouse work. I tried to fix the keyboard or mouse port mini usb but no luck. I can enter the BIOS pressing FLIGHT UP + POWER button, but I don't know if I can solve the problem there. Could someone give me an idea what I can do now?

  Yes, I forgot to tell you, that you need AC charger connected to use devices that need more voltage/amperage to work.

  Besides, you reset your windows 10 now?

  If so, the first thing to do:

  http://us.Acer.com/AC/en/us/content/drivers/5687;-; SW5-011

  Click the BIOS and download/install the latest version

  Click the drivers and download/install the drivers Intel Platform

  Click on the tab Applications and download/install quick access

  then select windows as the operating system 8.1

  Click Patch, download/install patch D12 for you keyboard dock

• error recovery Windows returns constantly to the start without reason...

  Hi I recently got windows 7 Professional 64-bit my Thursday school last burn on a dvd. Everything seemed fine after installation, and such as Saturday when he starts in front of the screen of bio and then pop up with error recovery windows telling me that windows wasn't one to repair or start normally anyway would it continue to go to this windows error recovery screen bit whatever I chose. These events eventually led me to believe that my hard drive has failed in which I had a brand new only on Sunday and installed fine all appeared while Monday morning he started to blow upward with the same error message I could try the repairs say it was very good, try and boot and it would restart again. Fortunately I was able to install my Vista Edition home premium 64-bit, which seemed to be ok for most of the day until yesterday when it grew up the windows on error with the options to use the last configuration or start normally (due to the recent hardware or software changes, but I have not install anything new in terms of software or hardware) that works , but im not sure for how long. Im very tech savvy for my age and know what im doing with computers, but I can't seem to understand what is happening since it is a new player none of my hardware is a failure and I don't know.
  Appreciate any help...
  Colin

  Repair system solves most of the start-up problems.  Some computers have startup repair pre-installed otherwise you will need a CD/DVD of Windows Vista.   If your system still does not boot in Windows, follow these steps to repair the boot sector.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 stuck on the Windows startup screen. Help!

  I was playing a game (Counter Strike: Global Offensive - on Steam) on my PC I got the blue screen error was 0x000000A3, after that I booted my PC then it got stuck on the Windows splash screen. Now, when I start my PC it gives me only 2 options, "start Windows normally" which leads to frozen Windows startup screen and it gives me this: '(recommended) launch Startup Repair' that I have used and tried all the options, except the command prompt like I do not know how to use it.

  My PC is a Windows 7, Asus

  Hello

  Often, this will work when the built-in repair software will not.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Cannot start Lightroom 6 (standalone) after installation - stuck at the start with scope screen not responding error

  Hi all

  As stated above, I am unable to start Lightroom 6 (standalone) after installation. I am able to launch, but I'm stuck on the boot screen (lightroom logo 6) with bezel does not no error. Would be grateful for any help, thank you very much!

  Just a suite, I use Windows 7 (x 64). I talk with the cat from adobe and I was told to create a new Administrator windows account and reinstall LR by using this new account.

  It worked for me, I am able to successfully access LR 6 using the newly created administrator account. I tried to follow up with another request - I have what patches can implement to my current user account so that I can access LR 6 using that account (and not the new windows user account). Unfortunately, I was told that cat Adobe does not support LR 6 and I am directed to ask my questions here.

  Thanks a lot again!