Windows update does not install the updates below!

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Comments Windows 7 does not install the network driver?

  Hello.

  I downloaded latest Win7 RC and installed on a virtual machine in VMware workstation. It not installed the virtual NIC driver so I have no internet!

  I googled the problem and it turns out that some people have reported this problem, and it came with a solution which in turn off the virtual machine, remove the network adapter, turn on the virtual machine, turn off again, to add a new and finally turn on the virtual machine - as described in this forum:

  http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/b5843189-d519-4e8a-a4f8-f1e671b341b6.

  I did and I've also updated vmware workstation (I have version 6.5.2 build 156735) and updated tools vmware on windows 7 and nothing worked. I have an another vm with XP and everything goes smoothly with networking and fully operational internet.  I used the win7 help and he pointed out this particular problem: there is no device installed network driver? Any suggestions?

  Each virtual machine can be started by double-clicking its vmx file.

  It is a plain text file. You can open it in every good text editor. Do not use scamblers text such as WORD and nonsense.

  You can compare the vmx file with the list of material that you give to the man behind the counter to your computer-friendly dealer store.

  You can add line at the end of this file - make sure you just you have twice the same line

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Win 7, stand-alone windows installer does not install the msu downloaded on my HD files.

  I have several MSU files that I downloaded on my computer.

  I click on them and the stand-alone windows installer goes into "searching for updates on this computer".

  2 hours later, still nothing.

  I know that people have problems with the update of win 7... Nothing works.

  So far is just sitting there looking for updates... He ran all night... Nothing... always to research.

  I can not find where Microsoft puts the installed update files... If the software distribution folder, which wiped out during one of my attempts to resolve this problem.

  windows update told me today there were new updates available, and then sit there for 6 hours trying to get them with no result...

  So if I can't even manually install MSU file, what can I do? Try to install the kb3102810 fix

  You can use internet explore and access the catalog M$ and bring the two,.

  That is to say a right click and run as administrator

  

  Then go to the catalog and the top search right for each update and allows them to basket

  http://catalog.update.Microsoft.com/v7/site/install.aspx

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• Windows Messaging does not mask the images in emails after installing ie9

  I have Windows Mail to block images in my emails, but that after the installation Internet Explorer9 windows mail does not block the images in my emails even if the parameters are always the same. I had to uninstall ie9 for this reason, except that ie9 seems to work. Vista Home Premium SP2.

  Stringy salvation,

  Try to upgrade to windows live mail 2011 and check if it works with IE9.
  Maybe just the problem of the software with Windows mail.

  http://explore.live.com/Windows-Live-Mail?OS=other

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer of operating system Microsoft Corporation

  System name HANDSOME-PC

  System manufacturer LG Electronics

  System model C500.-g. AEE5GE1

  System Type X 86-based PC

  Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

  H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

  Product key:

  X 16-96084

  CONCERNING

  TUESDAY BIOJY

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.

  Application of program compatibility does not start

  I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.  What gives?

  If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.

  Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.

• Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen

  Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen. It started after the uninstall of Registry Mechanic and PC Tools, but this cannot be bound. IE 9 seems to be particularly affected. So do not display all of the windows that show on the taskbar.

  Use the Windows logo key & left arrow several times for each windows application through their positions until they appear on the screen.

  This problem is normally reported after someone used an external monitor as the applications try to open in the same position they had when they were last open - so if there was an external monitor last time now disconnected, they will try to open it in the middle of nowhere.

  I know not, or the other tools that you mention, but if they are registry cleaners then they could also affect other parts of your system.

• Windows 8 does not support the prolific usb to serial driver

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Understand when the manufacturer of the hardware device will provide you with the drivers for the hardware you want to use on the operating system you want to use.  If they aren't - so there you go.

• Satellite P50-B-103 - Cyberlink Powerdvd does not install the update from Toshiba

  So I have an update for my toshiba Satellite P50B-103 for "cyberlink powerdvd" and it does not install, just to unpack and does nothing.

  I left the laptop to operate for about an hour to see if anything installed but it does not, what to do?

  Are you talking about the video player updated v 6.1.2.1 - A available on the Toshiba UE driver page?

  It is an update and requires the Player preinstalled (full version).

  After downloading, you will need to unzip the package (vidpl-20140813100353)
  Then, in the vidpl-20140813100353 package, you will find the TC30704300A.exe file.
  It is also a zipped folder. Right click on TC30704300A.exe and extract the files.
  After that, you will get the TC30704300A containing various additional files where you can start the update process.

• total size of the files of Windows 7 does not match the size of partition

  In the D: partition

  total space: 265 GB free space: 59.1 GB

  There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

  Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

  Of course free space does not match the file size.

  Do not partition system, no problem to update windows and restoration, sleep or page file.

  Some strange things:

  1. with the help of file size 3.4 correctly see the size of the file

  Daisy file occupies 206GB

  Once I copied the whole file to the other partition Daisy

  and the result is the record more like 2xxGB

  so I guess that 206GB is the right size

  /////////////////////////////////

  may be ignored.

  2 folder being read-only Daisy

  Even uncheck or untick read only box in the properties of the folder does no effect

  After loading, it still shows read only

  3. 'read only' does not work

  2, daisy file is read only

  but I managed to delete files inside

  ////////////////////////////////

  ////////////////////////////////

  Is it a mistake to folder structure?

  It's a newly installed windows, so I guess that windows is clean

  Hope to see the solution and identify the problem

  Thank you very much

  OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

  No other information seems more relevant.

  Ideas-

  1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

  2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

  I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

  Denis

• Windows 7 does not recognize the graphics cards

  I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.

  In "Device Manager", it shows two units operating as VGA standard with no details etc.

  It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.

  Any ideas or help... Please also stay simple for a non PC Geek

  No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)

  It of free and worth to be using,

  http://www.Macrium.com/reflectfree.aspx