Windows Vista Basic has been freezing after sitting idle in normal mode and safe mode.
Windows Vista Basic and was freezing after sitting idle in normal mode and safe mode. A few months ago, we had this problem and I replaced the hard drive. It was fine for a bit, but is distributed upward. The time that it will sit idle are shortened. I did a scan for malware and removed everything that was out there, obviously this isn't the hard drive and it is used for the most part just internet and e-mail, no new programs have been loaded since the new hard drive.
Hello
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Optimize Windows Vista for better performance.
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
Tags: Windows
Similar Questions
-
Windows Vista Basic has stopped working on my laptop.
After my recent updates, Windows Vista Basic has stopped working on my laptop.
After my recent updates, Windows Vista Basic has stopped working on my laptop.
Hey shousell
stoppped working covers a lot
If you can not start, follow these steps
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
or transfer your question in forum windows update link below
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
Walter, the time zone traveller
-
I use window Vista Basic in my laptop icon changes little icon real player and it is not editable by the option in their original form.
What can I do there is no virus I have AVG anti virus
Try to rebuild the icon cache using the following: http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
the sticker on my laptop has disappeared/deleted and I am not able to see the full key for windows vista operating system has been pre-installed on the laptop and now she asks activation and I did not quite correct key because he got faded/deleted, how can I get the key to work on the laptop I have compaq-presario-cq60-420 US laptop.please help me or give me the microsoft contact numbers where I can get my key of windows vista back by providing the serial number and the product number for my laptop. I am unable to work as the laptop does not work without the activation key.
Hello
You can use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.
Or take a picture of it and expand it on the screen.
______________________________________________________________
Also that, read also:
You can contact your computer manufacturer and ask them to send you a set of recovery disks and to reinstall the operating system.
They should do this for a fee, if they still have available to them.
_____________________________________________________________
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
____________________________________________________________
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.
See you soon.
-
Vista Ultimate has been reinstalled after crashing
Once an accident important Best Buy erased from my hard drive and used my full copy of Windows Vista Edition to restart my computer. It's a Windows Anytime Upgrade. My copy doesn't have an activation code. Plese help. Thank you, William Spooner
For starters, you can't use a upgrade disc reinstall Vista.
You reinstall the original operating system > and then perform the upgrade.
Take it back to Best Buy.
See you soon.
Mick Murphy - Microsoft partner
-
I have the old and the new windows product ID number
My computer is no longer available, so I can't get any information from the provider
Hi LHarrison,
You can get in touch with the Microsoft Customer Service to validate the product Key\ID and get more information about the product you are using.
For more information, you can consult the following articles:
-
My PC has been freezing on me. I am running 32-bit Vista Home Premium.
My PC has been freezing on me. Everything just hangs and I have to use the reset button. I don't know why its happening, but its very predictable and only occurs under very specific conditions.
It happens ONLY when I have "Shut Down", leave my computer off for at least a few hours and then turn it back on. It does not matter if I leave the power on or off. It will freeze in a few minutes to turn on my PC.
Once I use the reset button, it freezes more until I have stop and wait for a few hours yet.
If I stopped and turn it back on in a few minutes, it does not freeze. I haven't checked if pre-empting the gel by stopping before the Frost occurs prevents occur, I'll probably test the next time I have to leave my PC turned off for an extended period of time.
If I use "Restart", it does not freeze. Although an old problem with very a decrease in performance after using "Restart" is still there. (Note: it is a very old problem that I've never been able to fix,.) I took several technology experts, and may not understand what is the cause either, but I found a temporary solution. Using Shut Down and then turn the PC back returns performance back to normal. Occurs when a reboot occurs as a result of the update of Windows too, so I just avoid using any form of "Restart" whenever possible, but I have always been updated Windows. I think that its not related to this problem of gel.)
If I put it on sleep mode and come back after many hours, it does not seem to freeze. Recently, it froze once after that, but it didn't happen since then, so it might be a fluke.
I don't know what is happening. It happened very rarely over the past 2 years but only started happening every time in the last 3 months. Windows told me recently that he recovered from a blue screen when it happened, but this message appeared only once so far.
Whenever it freezes, I mean a period of activity of the HDD for about 2 seconds. And then read/write rhythmic sounds half lasting one second time per second, which continues for about 10 seconds. After that, the hard drive noise settle in a low kind of drone. I can barely hear the hard disk read or write something, but its much softer. It doesn't seem to change this State no matter how long I leave it.
I think its some sort of hardware failure that only happens when the PC components are 'cold', if that's even possible, but I can't be sure.
Speculation as to what is the cause of software or hardware? If it's a hardware problem, is there a particular part of the PC which would cause it to freeze predictable in such a specific circumstance?
I use mode sees as a temporary solution instead of closing my PC, but I fear that the problem will be extended later.
My motherboard is old enough that my CMOS battery is dying, it became apparent a month ago. I'll soon change the battery. I don't know if the problem might be related.
Hello
Start by making sure that the software is running properly and change this battery CMOS ASAP.
And always make sure that the latest hardware drivers are downloaded and installed on your computer manufacturer's Web site.
Go to their site > drivers download section > your model number > operating system > drivers > download and install.
Use the built-in Windows programs to operate correctly
"Delete files using Disk Cleanup"
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
"Optimize Windows Vista for better performance"
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
It may be necessary to use after the use of registry cleaners.
"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"
http://support.Microsoft.com/kb/929833
The only problem is that if it finds problems that it cannot repair, you may need to perform a repair installation.
@@@@@@@@@@@@@@@@@@@@@@@@@@@
Use this FREE version as a Malware Scanner on request.
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
-
Can't get Windows Vista Basic and Windows Aero on the list of options in the appearance settings for the modification of the taskbar to the original format, that's when I got the pc (Windows Aero). I havnt change options as he didn't need to. My Pc has been closed down as usual and when turned on, it began to Standard Windows... Please help as this is really frustrating me.
Thank you
Hi thanks for your response, I found myself by downloading the correct theme so I didn't have a chance to try your method. Thanks again... ps. If that ever happens again once I'll let you know if it works xx
-
Original title: PrintMaster 2012 PlatinumBasic
After you install the above program, I am not able to open it. I get a message saying that the color scheme has been changed from Windows Vista Aero to Windows Vista Basic. However, the program is still not open. Any ideas on what I should do?
Hello
1. is the issue limited to the program Print Master 2012 base Platinum?
If you receive a message that some Visual elements, such as transparency, have been turned off or if you receive a message that the color scheme has been changed to Windows Vista Basic, one of the following might have happened:
· A program that you are using is not compatible with the Windows Aero color scheme. When you run a program that is not compatible with the Windows Aero color scheme, some Visual elements are automatically disabled. When the program is not is more running, the Visual elements that have been disabled will then automatically lit.
· Your computer does not have to have enough memory to run all of the programs that you have open and also run the Windows Aero color scheme. Try closing some windows or changing your color scheme to Windows Vista Basic. If Windows automatically changed your game of colors in Windows Vista Basic, and you want to change it back to Windows Aero after closing some windows, follow these steps.
See the link below:
Why are some Visual elements will automatically turn off?
Also, check the link:
Solve problems with Windows Aero
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero
Note: you can use the fix tool automatically to diagnose and fix problems with Aero effects
-
Had to reinstall Windows Vista Basic on my laptop now girls probably 4 or 5 times over the past year. A question is we get full and you get to a screen that says not to interrupt and cela will take a few minutes, which, on an attempt, I let it run all night and never went. Finally, just let it load and put an end to the function and let him simply use the laptop. Then after a few moments to use his laptop begins to freeze. So, I have to go and try to reinstall its OS.
If you restore so frequently, or at all, someone is something fundimentally incorrect and visit places / download infected files.
Recover PC to factory specifications, winupdate turn off "recommended updates", but allow critical updates. Consult the manufacturer of your laptop and see if there are recommended updates shown there.
Install a decent Anti Virus, MS Security Essentials is free. Do this before you install any programs or connect to the scocial network sites
-
I bought a Toshiba Satellite at Wal Mart in 2009 (3 years ago). I created a guest account and my personal account (host) to access. However, all the important stuff are in the user account from the host. My toshiba laptop running windows vista Basic. It has been 4 weeks as it kept rejecting my user password. Moreover, I do not CHANGE MY P.WORD OR MODIFY IT. I had virus problems and since then I can not access my laptop through my user account. It seems that I'm a homeowner, my key to the door can not open the door and am now sleeping outside. Help please
Hello
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
And this is the Information from Microsoft on the problems of passwords;
You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.
If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
Malware can also cause problems with passwords:
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
See you soon.
-
Windows Vista Basic - display, icon & text animated look and does not fit screen
original title: Windows Vista Basic
After a recent update of my screen, icons, text and little else seems animated and does not have the screen on my laptop. Advice please? I tried to change my screen resolution, but it will only go all the way to the left or all the way to the right.
Hello
There are a number of things to try:
try going to your graphic card manufacturers site or computer and are looking for the driver download section
Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista
then try to make the screen of solution of problems
http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
Change the screen resolution
__________________________________________________________
or try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
________________________________________________________
and change how to get updates for you to choose what you install to stop it happening again
You may need to install one at a time to find the problem, we
Make sure that you do not use Windows Update to install the drivers of 3rd material part
Find them directly in the hardware manufacturer
and when you see the problem update right click on it - UAC prompt - then hide it
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
-
My Satellite laptop has been freezing randomly
Hello
I've seen a lot of posts on the subject, but no solution. So my laptop has been freezing at random the day I bought it. Today it happens much more often, this becomes ridiculously boring.
Is there a way to fix this?
> Once again, there was a notification that emerged after one of those who freeze soemthing mean in the sense of "there was a problem with amd (graphics card)?"but it was resovled."" It's all updated however.
This notification comes from the graphics card driver. It might be possible that there is a problem with the graphics driver or with the graphics chip.
Try to install the latest driver for Toshiba page. In case this doesn't help, recommend you to contact the service agents to check the hardware partsBut the previous user's right, its really hard to talk about issues that put t always appear or are difficult to reproduce
-
Re: Satellite P - CD/DVD drive has been disabled after installing itunes 8
* Help *! After installing itunes 8 my CD/DVD/RW Drive has been disabled.
It's already happened and I've restored by removing the upper filters and lower in the Vista registry but itunes then told me "the registry settings used by the iTunes for importing and burning CDs and DVDs are missing." and I can't seem to burn anything from itunes.
There, nobody how to restore CD/DVD/RW drive and retain full use of itunes please?
Have you tried reinstalling iTunes?
Reinstall the old iTunes, restart the computer and clean using CCleaner. Then, you can install the latest version of iTunes.If it doesn't work try to remove upper and lower filters again. Maybe you should do this after you have reinstalled iTunes.
Finally and above all, this might be useful for you:
http://APS2.toshiba-tro.de/KB0/TSB84026P0000R01.htm -
This error has been appearing after starting:
"Error loading C:\WINDOWS\system32\buvoemd.dll".
The specified module could be found.
Can we fix this or send me a copy of the module or anything like that?
(please help some of my games do not have given that this error has been appearing after start)
Thank you
There is no file with this name in Windows XP. It was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware. If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.
For more information about how to use the Autoruns, please see:
Maybe you are looking for
-
Vista SP2 x 64 update fails on shutdown
I tried several times to install the vista sp2 (64-bit). Everything seems ok until it tries to restart. The display shows the closing down and it stops there. I gave 6 hours before forcing a cold start. When return chkdsk runs and fails. Had to
-
KB2572073 security update is to repeatedly download and installation
HelloKB2572073 security update is to repeatedly download and installation. When I check on Windows Update reports installed successfully. How can I fix it?
-
Configuring the desktop for all users
When you use Windows 7, is it possible to put up desktop shortcuts for all users who like to log onto the computer, it was in XP? Thank you!
-
First cs6 laptop to desktop later project
Hi guys, as the title says, I have two marriages to the Mexico and want to start boarding trimming history etc. Will download all the images to high spec laptop to work on all away. When home I want to transfer all images and projects to my office to
-
I'm still trying to understand exactly what does PS with a working drive, but in any case it seems that my system works as it should. I'm always puzzled by why PS is not making much of a dent in my 32 GB of RAM but filling my empty temporary files di