Windows Vista Hibernate boot

Similar Questions

• Windows Vista repair boot loop - please help.

  Hello

  I had trouble with my laptop startup and having the dreaded loop of the Startup Repair. It started last night and I did everything I could to get it to allow me to connect on the long desk, enough to get my files, but there all come without result. I am now on my attempt 67th to get startup repair and desperately need help. My only problem is, is I have not backed up my files both needs so I can't do a full restore of the PC. Call me stupid, because I already know that I am.

  I already tried the three security modes, the last good configuration known and all the rest on the list of F8, but also contact Toshiba support, but none of them has nothing to help me. I did the whole thing from the CHKDSK, but she came back everything was clean, much like the Startup Repair tool says that there is 1 origin but he can't find not and comes up with the error code 0x0. I do not have a re-temperament of OS disc either and nor do I live near a "Geek Squad" of any kind. In addition, I can't restore my computer to an earlier point.

  I am at my wits end and very close to burst into tears because I can't get my laptop to work and I think my only option I have left is to do a complete restore of the PC, and I REALLY don't want to do that. My life is on my computer and I feel so stupid for it backs do not. This will definitely a lesson to be learned.

  My computer is a model of Toshiba Satellite L355D with windows SP2 and Vistax32bit.

  Please help me, and if this issue is resolved, then, I will be eternally grateful.

  Thank you for your time,

  MissSakura

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Strange problem with Windows Vista / & Dual Boot of Win 7, Vista is there, but is not...

  I have sucessfully partioned primary SATA drive in my old Dell XPS desktop computer for 1 year so I could dual-boot between Visat & Win 7, but that the process be re-sizing / partitioning, or installing Windows 7 posed problem with dual booting (MBR) which I was able to fix via the process of startup repair & recovery.

  Unfortunately, when I try to boot into Vista from the Boot Manager screen, I can get as far as the Welcome screen and then the screen turns white.  At some point, I think I saw an error message referring to a bad or Rundll file missing (I think it is)

  However, if the blank screen, I can do a Ctrl-alt-del and bring up the options menu to lock the computer, switch users, log, change password or start the Task Manager.  When I select the Task Manager, I see several Services & processes running.  It seems that Vista is running, but I can't do it...

  If I select log-off, I get the newspaper colorful off the screen.

  Any idea?

  Should I continue with the process of startup repair & recover?  I don't think the fix bootrec applies more, correct?   In addition, I unfortunately do not have the CD original Vista because it is a Dell system with all the stuff of recovery on the hard drive... (GRRRR!  ) which I think is a no recovery before I changed them were leaving...

  Thank you!

  Try this for Vista startup repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Repair of Microsoft Windows Vista Basic Boot option

  Vista fails to load because of lack of device or driver, I am in the boot options edit which shows just what follows

  Path: \Windows\System32|winload.exe

  Score: 2

  Hard drive: ccc3f323

  {/ NOEXECUTE = OPTIN/BOOTLOG/SOS}

  I have no idea what I'm supposed to do to solve the problem, would make my day to have a guide step by step so I mean worse than he is of things... thx.

  Just wanted to update, finally gave up on problems of startup option and reset to the factory settings.

• After Windows Vista starts in a minute, or sometimes less my office goes from his normal self in a white pagecould someone please help me get back to my office?

  I tried to restart my computer, but only to get the same result, I tried to backup and resture but my computer tells me always that it is restureing the computer already. If someone can help or has had the same promblem I would like to know what I could do?

  Thank you

  Dave.

  Hello

  • You receive an error message?

  You can view these methods:

  Method 1:

  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.

   
  Step A.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  Method 2:
  You can always follow performance issues in Event Viewer that all error codes are followed here.

  Reference:

  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows vista problems install keyboard and mouse

  I try to install windows vista ultimate on a new amd system I've built recently. The windows vista screen Boot starts well, but I can't go further with the installation because the keyboard and the mouse do not work.

  To solve the problem, I booted up with a Linux distribution and I can use the keyboard and mouse and everything works fine. Initially, I bought vista using boot camp on my Mac and the keyboard and mouse work well with vista on this configuration.
  I want to upgrade to windows 8 thereafter, but I might need to buy the whole program, rather than the update if I can't do vista works. I don't want to spend money if I can't because I'm broke. Any suggestions?

  Parameters of the BIOS of some computers have a setting "Enable USB Legacy" to allow the keyboard to work without Windows running.

  If you have PS/2 ports buy an adapter or a PS/2 keyboard. Most USB keyboards can be connected to a PS/2 port using a USB to PS/2 adapter.

• error 39 for optiarc dvd rw ad - 7503b ata device windows Vista

  My optiarc DVD RW AD - 7530B IS NOT WORKING in WINDOWS VISTA

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• CD/DVD drive not recognized by Windows Vista

  I installed a suite of burningb of CD and DVD on my Toshiba (under Vista Home Premium). My CD/DVD drive appeared more in the computer and was no longer functional. I deleted the program I installed and apparently caused the problem, but it did not help. I have read through the help of Microsoft (929461, 314060) documents and used the Fix - It utility. Also unsuccessful. I discovered the response of Martin, the technical support engineer made on May 5, 2009. I followed his instructions with great success. However, my question now is this: I have still some remains of the problem left over. I get an error message at startup saying, 'InstaBurn UDF driver is not installed correctly. Run the InstaBurn installation program. ' InstaBurn is part of the suite of the copy (hotpics by Nova Development Corp.).  I also have an error message of my reader DVD Toshiba saying that the DVD player does not work - although it is. I played a DVD as a test on it after that I followed the instructions above. How can I remove these error messages annoying that aren't accurate?  Would appreciate any information about this minor - but annoying problem.

  Hello

  Do a Restore Point then you can go back to where you are if necessary although you should not have to:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================================

  Go to Toshiba and download and drivers or programs that affect the CD/DVD drive - Chipset
  and BIOS updates can also play a role.

  For any download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Toshiba downloads - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Then reinstall the programs that you use for this drive.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• CD/DVD drive is not detected (Windows Vista). Error message: Please insert a disk (removable disk): __Our device driver is: TSSTcorp CD/DVGW TS-H653L ATA Device.

  Was not aware there is a problem until I tried some recently audio and data CDs.  Have you tried different Web sites to help you, however some of the directions come with a warning that by following certain procedures I can create other problems.  The FixIt tool was not able to install the player.

  Hello

  Please ALL these even if you've done it before as it's often the total process that
  solves the problem. You should also check with the system manufacturer as some readers do not use windows
  by default the drivers and need their own, use the bottom and if no joy check on the site of the manufacturer of the system.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• My CD/DVD driver won't read any disks. (windows Vista Home Basic)

  My driver CD/DVD does not read discs. Whenever I have insert a disc into my CD/DVD player, absolutely nothing is happening, as the drive is not yet there. I tried to get gpedt.msc as help Windows said to me, but the file is not found. Can someone tell me what's wrong and help me fix?

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows vista Manager or the device does not recognize the cd/dvd drive

  I have windows vista and it is not recognize my cd/dvd drive. When I click on my local drive (c :)) and recovery hp (d) shows up, I checked my device manager and nothing shows here either for my cd/dvd drive, so I checked the cable but it looks fine.) checked the files of the upper and lower register, but that fact so I just bought a dvd burner external made by polaroid that is USB2.0 and supposed to be plug-and-play, but when I connect it nothing happens nothing. the power turns on two cd players and the disc starts to spin but it stops after 15 seconds and I get nothing. I am confused and don't know what to try. Please help thanks. so I tried to use the running microsoft dvd set and the message I said 'dvd cd drive not detected '.

  I tried these steps with no luck

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hello mike salinas.

  1. you have any third-party burning software installed on your computer?

  2. have you checked if the external CD drive works on another computer?

  I suggest that you check if your internal CD-ROM drive is detected in the BIOS.

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer, but before I get to the BIOS to start Windows. Check to see if there is the CD/DVD drive in the BIOS.

  You can see the article for more information about the BIOS:

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Regarding the external CD/DVD drive, I suggest you see if it works on another computer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Vista does not recognize my DVD player. It is a Pioneer DVD - RW DVR - 110 d ATA Device.

  I looked at the information system and noted that there is a device error.  After checking for a solution online, this is the message I got:

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I have a Dell Inspiron 1525. The player/cd-DVD drive will not work. The help section it says it is (code 10). The drivers seem to be installed. Can you help me please? Operating system is Windows Vista Home Premium

  I tried the support centre and followed their advice, but no luck yet.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.