Windows Vista Menu scrolling Problems__

Similar Questions

• Repair of window Vista - problem starting - stuck scrolling bar load

  Hello

  Looking for assistance here, if anyone can help, I have a laptop LG R410, age two months running windows vista basic 32-bit.

  Laptop used to start and rest the scroll bar loading.  Tried through 'F8' menu to start in "Safe Mode", but wont even boot into Safe Mode, is the last driver loaded:

  Windows system32 drivers crcdisk.sys

  Also, tried "last good configuration" but nothing is.

  Try to repair windows with the repair disk. but no joy once again, by looking at the details of the diagnosis and repair, it shows repair stalled when the event log diagnostic testing.  It will not accomplish this test, even after leaving during the night.

  Also tried to go back to a restore point, but because it is new, it doesn't show any restore points that were to restore the system back.

  No backup available or go to restore.

  Memory Diagnostic test has been successful.

  Ran sfc/scannow to command prompt, is back with "start scanning system.  This process will take time. "A few seconds later says"Windows Resource Protection could not perform the requested operation. »

  A ran Chkdsk C: /f so none of the bad sectors on the hard disk.  Summary says "Windows has checked the file system and found no problem."  But return the following message at the end summary "cannot transfer messages saved in the journal of the events with the 50 State."

  Any help to help solve my problem would be appreciated gratefully.

  Thank you.

  Hi Ashish,

  Thanks for responding.

  Problem solved, or not!  Hard drive is damaged.  As a result of tests with checkdisk and knowing that he is not really do a thorough job.  I checked the hard drive once more with 'SeaTools' of Seagate.

  The hard drive is riddled with bad sectors.  Filed in support of Service today and they confirmed the hard drive is faulty and they will replace it under warranty.

  Thank you for taking the time to answer my question in the first place.

  All the best to you and the team at Microsoft.

  Kind regards

  Scott Connoilly

• Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

  Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

  Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

  Can someone give a help?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• I got this laptop from a friend today and the windows vista program must be a trial version. I have xp to install but I can not even a start even menu display. __

  I have windows xp to install on the pc, but the program windows vista here is a trial version and it is out of time. I can't even start to show even a menu. I try Ctrl-alt-del and it does nothing. Please help me I don't know what to do. I want to install windows xp on here and get rid of this vista trial.

  If you already have the Windows XP disc:

  • Insert the Windows XP disk into the CD/DVD drive
  • Completely turn off the power - the power supply light should be off, without blinking.
  • Turn on the computer and be careful. When it says «Press any key to boot from CD...» "Press a key on your keyboard, the Windows XP Setup program is now charging.

• During an update to Windows Vista, my office has disappeared with the task bar and start menu.

  I can only access my and other programs through the Task Manager.  I have tried troubleshooting, I restore my computer on the eve of what has happened, but nothing helps.  Any ideas?

  Hi cthodges

  Thank you for using the Microsoft Answers Forums!

  I would like to ask you a few questions to help focus in the right direction:

  Are there other specific details that you can provide that will help us understand and solve your problem?

  We can try a few steps and check if it works:

  Run explorer.exe from the Task Manager > new > task. If the start menu reappears, it would confirm the cause.

  We can now perform the following steps:

  Step 1:

  Run an on-line analysis of your PC of malicious software:

  If you want to scan your computer for malware and potentially unwanted on a Web site, please use the Windows Live OneCare safety scanner.

  Windows Live OneCare safety scanner is an online service that lets scan you your computer to protect yourself, clean and operate at its best. Use our free protection scan to check and remove viruses, spyware and other potentially unwanted software and to find vulnerabilities in your Internet connection.

  You can also run Anti-Malware on your computer. Follow the steps in this link:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Step 2:

  To use a boot option, follow these steps:

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  c. when the boot menu appears again, and the words "Safe Mode" appear in the bottom, select the installation that you want to start and then press ENTER.

  If it works fine in safe mode, infer you that all third-party programs are causing the problem.

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  S tep 3 :

  The SFC utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a sfc on the windows vista computer scan. To run a scan suite sfc as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  See this link for more information:

  http://support.Microsoft.com/kb/936212

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista how can I get to the bottom of the start menu?

  I have a problem, "Start menu" I like there to the top instead of the bottom in windows vista. I don't know how to take it down. If any of you guyz has an idea, please report it here.

  Hello

  I guess your taskbar is on the top of the screen instead of the bottom? If that's what you hear, right-click the taskbar and select "lock the tasbar" to unlock it (if it is not already unlocked). To check f it is locked, there will be a checkbox next to "lock the taskbar". If there is no check box, it is already unlocked.

  Once unlocked, just drag the taskbar to its current position to the bottom of the screen where you normally and then lock the taskbar.

  Kind regards

  Patrick

• Windows vista start menu

  How to change the work of this button in the start menu of windows vista?

  http://i.imgur.com/SBAv2ze.jpg

  It makes my PC beds

  I wanted to say I want to change the function of the power button on the start menu

  but I found that I need to somehow

  Thank you

• Menu, display, and resizing of fonts in Windows Vista

  I was using IE 9 Windows Vista. Inadvertently, I did something unknown which reduces the screen size and fonts in web pages in IE, so I clicked on the menu help and then clicked on something (I don't know exactly what) screen size that looked like it would increase. Requiring a reboot that crossed then something I've never seen elsewhere (a process of "CHKDSK" 3 steps). That process seemed to end well and restarted Windows, but the Outlook .pst file was immediately not accessible because "it was in use by another application" (false). I stopped and restarted again, that solved the problem of Outlook. But now ALL (desktop icons, menu bars, book list and address of Outlook Inbox, the taskbar and icons of status bar, Internet Explorer, Excel, etc. etc. cells default Favorites list) are all too big.
  How can I reduce the size of these things? It must be a global Windows setting that I have somehow disturbed.

  Hi John,.

  Thanks for posting in the Microsoft Community Forums.

  According to the description, the display for various applications have changed. I might help you.

  This problem may occur if the display settings are changed in the computer or the problem with the graphics card itself. Please follow the steps to solve the problem:

  Method 1: Use the key CTRL and the less on the keyboard to check if it works.

  Change the screen resolution

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Method 2: Please restore the computer to its previous state

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. If the system restore does not help you, please undo the system restore.

  Undo system restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/undo-system-restore

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support

• Windows Vista - no start menu and blinking pointer

  Original title: Please help me "solve this problem."

  I DON'T KNOW WHAT EXACTLY IS THE PROBLEM. BUT WHATEVER IT IS... I don't understand!  THIS IS MY FOURTH ATTEMPT TO GET HELP FROM THE MICROSOFT COMMUNITY.  WHENEVER I GET THIS FAR WITH IT, I CLICKED ON 'TRANSFER' I GET "LOGGING IN OFFLINE MODE" AND IS IMMEDIATELY CUT IN OFFLINE MODE!
  AND I CAN'T CALL THE "MICROSOFT CALL DESK" BECAUSE I'M ALMOST YOUR MINUTES ON MY CELL PHONE, AND DO NOT HAVE A FIXED POSITION.  BUT I DESPERATELY NEED HELP!  I DON'T KNOW IF THIS WILL GET THRU OR IF I'LL GET CUT NEW OFFLINE SO SICK KEP IT RUNS [KEYWORDS] PROBLEMS;  START MENU, THE MOUSE POINTER ARROW FLASHES, VERY LIMITED USE AND KEEP CUTTING IN OFFLINE MODE.  IT IS WHAT IS A VIRUS?   Help, please?   THANK YOU VERY MUCH [ADVANCE] TO HELP WITH THIS!

  Hello

  I'm sorry to hear that you are facing many problems with Windows vista. I suggest you follow the suggestions and check.

  1. don't you make changes on the computer before the show?
  2. you receive an error message?
  3. What is the brand and model of the computer?

  You can try to boot into safe mode with network and try to run a Microsoft security scanner and check.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Just reply with the results. I'd be happy to help you further.

• On windows Vista, got blinking screen and cannot start a program in the start menu

  On my Vista, I can not select and start a program (for example Word in the desktop menu) because the view menu of the is a split second and closes immediately.

  The second screen flashes...

  The third symptom is when you access the WEBMAIL from my internet provider. I enter my user name and press "tab", but instead of going to the password, sinking a nopassword... and the system rejects my login... help

  Hello

   

  Method 1:

  Since you have several questions, you can try with the new user account and see if that helps.

  Step 1: Create a user account:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If step 1 work, try step 2

  Step 2: Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

   

  Method 2:

  For problems with Microsoft Outlook, you can post the question here:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

   

• Need help with the Windows Vista Start Menu

  So, I turned on my computer today and clicked on the start menu, I expanded the tab all programs and was shocked to see that it was empty. Tab Assecories, Extras and upgrades, games, all of them, all tabs have disappeared. Is any way to restore? I don't know how to get to the Defrag disk or cleaning disc or one of these things without it. Help, please!

  -Tim

  A plus for you to try.

  It still happens today. Yes?

  Why not do a system restore.

  Choose 2 days ago, or a date then your list of all the programs worked as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• I have windows vista and I had to use my recovery disk, but an error came as it ended. I tried to use the menu options of recovery but now she plays as if I had no drivers. What should I do?

  I used my recovery discs and some sort of error came. so, it has not fixed the computer. so I think that some how drivers were not loaded. However what seems to be a driver came when I press my f12 button to use the system recovery options menu. but I insisted on using it, and another box came to tell the software installation media or something to use to load the drivers. I also tried to use the Startup Repair tool restore and system by surprise that I have on an external drive listed under windows backup care but nothing has worked. I don't know anything else to do.

  1. Open the 'computer '.
  2. Right-click on the drive in question
  3. Select the tab "Tools".
  4. In the error-checking box, click .

  Well you can suffer the consequences of not running it who are often worse. CHKDSK found and try to
  repair disk problems, it does not really create them.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

• Recent problem that the Autoplay menu does not appear when I plug my digital cameras and devices on Windows Vista

  Recently, I had a problem in that, plugged in my camera and also my phone options auto run does not come up as they used to do.

  The cameras appear under my computer and in Device Manager but not under "Devices that you connect to your computer will be listed here" appear in the automatic game options and this area is totally blank.

  I also checked the box "Use AutoPlay for all media and devices to" check in the auto play options.  CD and USB sticks work very well.

  I have Windows Vista.  I read that Microsoft has sent a security update patch to stop the AutoRun works on Windows Vista.  I tried to turn it around by using their dose, but it doesn't seem to help.

  Any ideas anyone?

  Hi - my problem is now solved.

  Not long after reading the post above the laptop crashed and had to have a replacement hard drive.

  I just got the laptop PC repair workshop, and although there are still a lot of updates to download, I plugged the camera the hurrah the AutoPlay menu appeared.

  Obviously there is something fundamentally wrong with the laptop, but it will be interesting to see if AjutoPlay still works when all the Microsoft updates have been resettled.

  Thanks a lot for your help.

• Menu toolbar problem and start for windows vista Home premium 64-bit

  I've recently been tweaking and accidentally got rid of my explorer.exe file, (I think that I sent to my trash and maybe deleted it?). Once I realized that I just typed as a new task and it reappeared.  The problem I have is that since then I had no toolbar or start menu.  I tried to access it through the control panel that does not work; I tried Ctrl Esc, which does not work, I tried everything I can think of? What's weird, that's all my desktop icons are great, and for some reason if I have Ghost click my mouse in the lower right of the screen I open random programs usually on my toolbar, I can even drag on my desk.  I tried to find common ground, if my toolbar is there somewhere?, do to slide it back on my screen, but it was done without success.  Another thing is when I start my computer in safe mode, my toolbar appears with my Start menu icon?  Anyone know what may be the problem?  I am running windows vista family premium. operating system: 64-bit

  Hello

  Method 1:

  As you are able to see the toolbar in safemode, I suggest that you perform the clean boot to limit the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2:

  I suggest check the link and try to perform the checking and scan SFC (System File Checker) if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know if it helps.

• My says Windows Vista update, phase 3/3, do not turn your computer, that hard thing 24 hours, I can't start menu, I can't go down the screen of Windows Vista update

  I have a laptop, ran a software antivirus and then he says to Windows Vista is to install the updates, phase 1 of 3, then 2/3, then he is stuck on the phase 3/3 for 24 hours, if I turn the computer market and unplug it and try to turn back still evokes the same screen. very frustrated.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/