Wireless all-in - one blue screen, flashing lights, help

Similar Questions

• 2540 HP printer all in one: Blue Hp flashing wireless. Do not accept the SSID password

  I have a HP 2540 wireless with a blue light problem flashing. The error message is 'do not accept password' somethhing or similar to that. I restarted the router, printer and pc according to the instructions. I reloaded the latest drivers from the Hp I homepage I pressed the buttons wireless and cancel them for 5 seconds. None of this works. The printer will not connect to my home network or directly to my pc. I have windows 7 pro 32 bit and Att Uverse network using WPA - AES. I type the correct SSID password, but it does not accept the installation program. He logged the first right on the day with all the features of operation area. I think I need to reset to the factory as I've made a few changes setting to print from IE Explorer and Google Chrome.  From one day to the next day something changed after the next power Cycle.

  Connect to your router and remove all security on your SSID temporarily. Now try to connect to your SSID unsecured. Are you successful? If so, go back and add WPA2-AES with your password and try again.

• My HPOfficejet j4680 wireless all-in-one printer error message says its offline

  I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

  Yet, I just continues to be my what. Any suggestions? Thx John.

  Hello JohnGeiser,

  Take a look at following print references:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Let us know if that helps.
   
  Best regards
  Matthew_Ha

• Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

  Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

  Thanks for the reply.  HP has called since then and was finally able to install the driver.

• How to turn off ringer on my Officejet 4500 Wireless all-in-One

  How can I turn off the ringer on my Officejet 4500 Wireless all-in-one unit?

  My operating system is Windows Vista.

  Hi luxorsecurity,

  Follow the steps below to disable the Speaker Volume

  1. press the setup button (key no. 8)

  2. press the right arrow to the base and then setting OK

  3. press the right arrow to the Speaker Volume, and then select one of the options below

  • Soft
  • Loud
  • Off

  

• Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

  Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

  I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

  Hello
   
  What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP
   

  Please answer the question above so that we can better guide you.

  For now, you can read the following article.
   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Check if it helps.

• OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

  Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

  Hello dhe8011,

  Welcome to the HP Forums!

  I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

  Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

  Let me know if this document solved your problem or not.

  Impatience on your part.

• HP OJ6500 CB057 wireless all-in-one; Windows XP

  Where can I get a usb cable for an hp6500 wireless all-in-one printer, or is it the same as for a hp2210?

  http://ftp.HP.com/pub/softlib/software11/COL31304/MP-77752-2/OJ6500vE709_Full_14.exe

  Click and download the driver enjoy and

  Please give congratulations... while others may also find as solution

• HP Officejet 4600 all-in-one: unable to print on my HP 4600 wireless all-in-one

  I have a HP Pavilion computer G7 with windows 7 64 bit operating system and A HP Officejet wireless All In One printer 4600 and my printer shows it's online but says print window is not and I can't print. What can I do to fix this?

  I suggest that connect you with a USB cable then.

• Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

  I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

  What happens and how can I solve this problem?

  Hi TM1997,

  Thanks for the reply!

  Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

  Have a great weekend!

• Sending faxes/install of the HP Officejet Pro 8500 Wireless all-in-One

  I'm on a po to buy this printer but have a question that I can't find an answer for without having to buy the printer. I have no Modem built into my PC.

  I am wanting to know:

  What I have a fax modem from my PC

  An external USB Modem will work

  To really stretch the question, how the external modem will connect to the all-in-one

  The all-in-one has a fax for stand-alone fax functionality.

  If anyone knows these answers I would appreciate a response. HP Officejet Pro 8500 Wireless all-in-one is on currently on sale $ 150 off and I would like to grab one before the end of the sale.

  Thank you very much

  Jerry

  When I talked to my PC manufacturer, I discovered that you can't do what I wanted to do, modem or not, since the PC Fax documents

  You can mark this question as answered and thanks for the help.

  Jerry

• All new computer, blue screen of death/accident

  My boyfriend and I bought a new computer 3 weeks ago, it was an e-machine. Kept crashing, got the blue screen of death error. Back to Best Buy for a new computer. Compaq Presario. Has taken a House. The same problem. Returned to Best Buy and exchanged for a new one, exact model. Exactly the same problem. Problem occurs when it is on Facebook, play games or even a game installed on the computer.

  I came to the conclusion after hours of research that the problem is Windows 7.  It is a brand new computer that I paid a lot of hard earned money for. It should not keep breaking without reason.  Was on the phone with HP tech support for over an hour, that still does not solve the problem.

  I don't know much about computers and what information you need, so I'll just tell you what's on the box. Let me know if you need more information.

  It is a Compaq Presario CQ5320Y PC with a processor dual-core AMD Athlon II X 2 240 Dual-core processor, 3 GB, 500 GB HDD, Nvidia GeForce 6150 SE graphics card.

  When it crashes it said space disk or something on a pilot. Launch of Nvidia and the updated graphics driver, it wouldn't let me update the driver for the card mother, says that there is a problem of incompatibiltiy.

  Here is the error message we continue to do.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 1e

  BCP1: 0000000000000000

  BCP2: 0000000000000000

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\061910-15693-01.dmp

  C:\Users\lance\AppData\Local\Temp\WER-27830-0.SysData.XML

  I've always hated apples but I'm seriously thinking about getting one until Windows can recover, if that's even possible.

  As happens with more than one system, it probably isn't a Windows problem and not likely to be a hardware problem.  Looks like it's maybe a driver issue, but without more details, it will be difficult to know.  Add nothing to the system (software, hardware, etc.) after he unboxing and problems?  If you care about that resolve at all - and I don't really think, you should because you get the behavior with new systems (use the warranty and keep complaining the problem if it keeps recurring; get your money back if it is an option, and choose another brand of system.) Keep in mind that you've got a failed system [or the entire model is a dud!] and this should not reflect on Windows 7)-start by downloading the vacuum as described below.

  Start here:   you can download the c:\windows\minidump content to your SkyDrive and provide a link?

  To treat blue screens, following general tips:

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  Other common suggestions include ensuring drivers are up to date (including video drivers), but also to ensure that you use the latest version of the BIOS.

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that passes the test is not necessarily good - he just failed a test.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings - > then-> the names of the drivers select in a list-> next-> sort by provider-> select all non-Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for an error checking to happen after you have enabled the auditor as described and then transfer it to your SkyDriveand provide a link.

• finished - c410b all-in-one white display blinking lights

  Hello

  I have this printer for about two years now.

  Yesterday, when I turned it on, there was a problem.

  He started going through his starting routine with the HP logo displayed, I attached peripheral tone from the pc.

  However, there was no verification mechanism

  displayed a code "C2FE0160".

  the display went blank, and the attention, wireless, print photos, auto response and power lights flashing it.

  I tried unplugging all the cables, and leaving unplugged for a while, etc, etc, etc.

  Nothing seems to make any difference.

  Can anyone help

  Thank you

  concerning

  Paul

  After talking to HP support, they say it is a unknown hardware problem and send a replacement.

  It seems that something is wrong with the ink system. Maybe it's a problem of cartridge or print head. Here is a link that can help you.

  http://support.HP.com/us-en/document/c03081973

  Let me know if it helps.

• Blue screen flashing

  I have 3 computers all run Windows 7 Pro. In the last 24 hours, all 3 have completed an automatic update of Windows. Now all 3 are not usable. When the computer is finished the update and stops I can restart the machine - the computer looks like it starts correctly however it gets the blue screen and flashes repeatedly with a spinning icon. When I try to start in safe mode it gets at least up to the point where I can click the icon to open a session - but I never received a place to type my password and the screen goes only to the logon icon. What has Microsoft done?

  I must point out that all 3 computers running Norton Antivirus.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you found problems screen flashing after installing the recent update of KB3097877 in your Windows 7 system. In order to diagnose and resolve the issue, I suggest you try the steps posted by Ravinath P replied on 13 November 2015 in the following thread and check if the steps help you to solve the problem.

  Screen flickering and problems log on Windows 7 after installation of updates

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/flickering-screen-and-sign-in-problems-on-Windows/df9c8255-587f-4DBF-BB45-6639b29dc4ae?TM=1447375680761

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• HP wireless all in one printer C410 can get a connection

  I have a HP C410 e-All-In-One printer/fax/copier that is wireless. It was working fine with my computer until someone changed my internet security settings, and now I can't connect. How can I re - adjust the internet printer or the computer setting so that it is compatible again? My printer just wirelss button continues to Flash, as it cannot connect. When I go in the menu on the printer Wireless Setup, I can say that the printer sees my internet, it cannot simply connect. Help, please!

  The easiest way is to uninstall, and then reinstall the printer. If this does not work, then you should ask experts network for advice: social.answers.microsoft.com/Forums/en-US/w7network /son