Wireless Cardbus problems Tecra 780DVD

Similar Questions

• DVD decoder hardware Tecra 780DVD

  Hi my laptop Tecra 780DVD, I have a problem running the dvd I tried, WinDVD, PowerDvd and DVDexpress none of them makes all diff still does not.
  Now I saw on the internet that I need DVD hardware decoders, so where I would be able to download the file! Please note that my Win ME operating system
  Best regards

  Hi Henady,

  the Tecra 780DVD was delivered with the operating system Windows 95, Windows 98 a Win Nt 4.0.

  The problem is that the installed hardware decoder does not work with Windows ME !

  So in this case I can't help you.

  Good bye

• Wireless Chipset in Tecra M10 - 1CH

  Hello

  Please can you me the Chipset wireless full in Tecra M10 - 1CH?

  Thank you.

  You mean what WLAN card is inside or what?

• Wireless network problem: disconnects randomly anywhere between 1 and 4 hours.

  I have a wireless network problem, it disconnects randomly anywhere between 1 h and 4 h. The network consists of a Samsung 4 G hotspot and a Linksys AE1000. The signal strength is excellent, the AE1000 is 1 ft of the computer and 1 ft of the HotSpot.  The computer is a Dell Dimension 2400. Any ideas?

  Hi Jack,

  Problem solved.  I did 2 assumptions about the original problem.  I assumed that the 2 Tech that I spoke made the hurt their product. Battery saver has been activated on the hotspot.

  Thanks again

  Greg

• wireless connection problems vista adapter usb wireless 802.11 b/g #2

  my HP pc used to connect to my internal wireless, no problem. I know the wep key and had several hours of navigation...
  I move for a year, come back. apparently my PC doesn't connect now... in fact, it won't even connect with a CABLE!
  He repeats to me ' identify with. "
  Well, Vista has been updated since and I've been usng a mobile dongle (at GREAT expense!) to try to update, but now I'm sick of the cost and I need internet access appropriate again!

  Thank you for responding Srinivas
  I don't know the model but it is a HP, three or four years now.
  I had all sorts of messages of "not able to connect" and limmited conectiviy... I'm sure I had a relative at all simply have no connection
  the browser, I would have used that I had connected would be Firefox, but it has yet to get to the point that I was getting nothing. bytes sent might be higher than anything but received nill.
  at the time, I was unable to get ANY connection NET... for all intensive purposes, I've been totally disconnected

  I had tried everything that arises, each suggestion had windows, but it made no difference... even a connection WIRED sitting to 'authenticate '.

  Odly enough, who are seeking to solve a problem with my scandisk is not not be able to access C drive I have run "services.msc".
  looking through everything that might stop the player access, I found that the DHCP Client does not work... I made sure it runs automatically and (because I checked my settings of a few hundred times) the network came as a light!

  I don't know what turned it off because none of the programs I run affected before (I haven't installed any new programs since then be disconnected from the network)

  Thanks for the reply. I hope this information helps in similar cases in the future :)

• Pavillion G6 2014tx: wireless connectivity problems

  Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

  I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

  Hi there @Parthsagar2010

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your wireless connection, and I am happy to help you with this.

  I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

  HP Pavilion g6-2014tx Notebook PC - software & drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

• Windows 7 wireless connection problem

  I just bought a brand new Alienware m17x and all drivers are up to date... .IM with broadcom wireless network adapter. The strange thing is that last night I was on the internet for several hours without any problem using the wireless, but this morning iwas unable to use my wireless internet access. This has happened several times now. Sometimes it says "not connected - no available connections" and sometimes he says "not connected connections are available" when she says, links, I try to connect to the network, but it says "unable to connect to the network. The only time wherever I was able to connect to wireless internet, was when my computer is automatically connected to my wireless network without me having to select the network and attempt to connect. I read things about windows 7, with a mode of "sleeper" for wireless connections or something, and that can be the cause of it and that it is better to turn off or downgrade to xp. I am really frustrated because I am not able to connect wirelessly and I hope you guys can help me find a solution.

   

  Guide to correctly troubleshoot wireless M17x
  with Dell Wireless 1510/Broadcom card
  by Glzmo

  Since many new Alienware M17x all powerful users, especially those who use Windows 7 as operating system there are various problems with their Wi - Fi connection and post threads asking how their difficulty over and over again, I decided to write this guide to show them how to solve these issues properly Commons. The solutions in this guide were created and designed for 64-bit Windows 7, but they may also work in Windows Vista, although these problems were experienced by users of Windows 7 mainly in the past. It could very well be that the problems start occurring in Vista as well with the new drivers and Windows updates.

  I. may not connect to the wireless network and or see the wireless adapter when the Ethernet cable is disconnected
  If you sometimes or always unable to connect to the wireless network, cannot connect to the wireless network when the Ethernet cable is disconnected, unable to connect to a wireless network unless you restart once to get this work and other weird problems to be unable to connect to a wireless network continue with section II. Otherwise, continue with section II..

  Sleep of a.i. Disable on disconnect device
  Some new Nvidia Ethernet drivers have a function called sleep device to disconnect. This is the culprit. Normally, it should only put the card Ethernet to sleep when the cable is disconnected, but it is buggy and thus kill the wireless connection as well.
  Follow these steps to disable this feature on your Ethernet Nvidia card:
  1. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
  2 double-click network adapters.
  3 double click on NVIDIA nForce Networking Controller (Yes, that's indeed wired Ethernet adapter).
  4 click on the Advanced tab.
  5 select sleep on disconnect device.
  6 set the value to disabled.
  7 click OK and wireless should work again (may require a reboot later, but probably not).

  I.b. install different drivers (older) who do not have the device sleeping on disconnect feature.
  The above does not work or if you are not comfortable with these drivers, follow these steps (if step A.i. was successful, you will not need to follow these steps). Take care to create a system restore point before proceeding:
  1. click the Windows Start button in the taskbar.
  2 click on Control Panel.
  3 click on uninstall a program.
  4 in the list, double-click Nvidia drivers.
  5. Mark Remove only the following.
  6 in the box below, only check the Nvidia Network driver.
  7 click Remove and follow the uninstall instructions.
  8 restart the system, if you are prompted to.
  9 download another (older) driver from Nvidia.
  10 install the old driver.
  11 when asked what drivers you want to install, select only the network driver.
  12 follow the installation instructions and restart your system if prompted.

  II. Low or fluctuating wireless connection speeds
  If you have problems with WiFi low connection speeds (such as rates decline over time, the speeds are much lower than they should be, network lag/stutter in online games, loss of light packets, loss of internet connection as LAN works and other weird things) or speeds of fluctuating wildly without apparent reason wireless connection install the version of the Dell Wireless 5.60.18.8 drivers instead of the standard Broadcom drivers. All older drivers will usually cause the speed of connection under normal. Note, however, that you may need to install the driver manually via Device Manager as the pilot was not released for another laptop and is not officially available to the M17x yet - that's why the installer won't work. Take care to create a system restore point before proceeding.
  Here is a step by step how manually install the driver:
  1. download the drivers Dell Wireless 5.60.18.8.
  2 check out the R29128.exe file using an extraction utility like WinRAR or just run it and quit the installation program.
  3. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
  4 double-click network adapters.
  5 double-click the Broadcom 802.11n network adapter entry.
  6 click on the driver tab.
  7 click the button Update driver .
  8 click Browse my computer for driver software.
  9 click on Let me take form a list of drivers for devices on my computer.
  10 click the disk provided .
  11 click Browse.
  12. select the folder that you extracted the drivers you just downloaded in step 1. in.
  13 select the subfolder DRIVER_US (if you are in the United States), DRIVER_JP (if you are in the Japan) or DRIVER_ROW (if you are in the rest of the world), according to the region you are in.
  14 click on the Open button.
  15 click OK.
  16 select the driver that says Dell Wireless 1510 Wireless-N WLAN Mini-Card of the list (you may have to scroll down to see - it presents itself as second to the last in the list for me).
  17 click on the Next button.
  18 you will get a warning that the driver that you are about to install is not compatible with your hardware. Ignore the warning and proceed with the driver installation.
  19 restart your system if prompted to do so.
  20 your new driver should now be properly installed and the speed of your wireless connection in the order.

  III. If all else fails (or you've just had enough of boredom arising from the Dell Wireless 1510/Broadcom card)
  Replace the Dell Wireless 1510 problem with a card half-mini Intel Ultimate N WiFi Link 5300 A/G/N (use the bluetooth as the third antenna antenna or buy you an additional antenna for this). It works very well with the M17x, has better connection speeds to strips of the 2.4 GHz and 5 GHz (this last has speeds really bad on the Broadcom/1510), it has not required to jump through the hoops to make it work properly and much more, it works with standard drivers and Intel maintains their drivers up to date. It is also much more reliable and faster as well, especially on the 5 GHz band, but also on the 2.4 GHz band.

  For more information on the subject of tweaking the settings of your Dell Wireless card, check out the official setting advanced properties: Dell Wireless WLAN Card User Guide.

  I hope that this guide will help you solve your Wi - Fi connection and allow you to enjoy speeds of complete wireless connection on your laptop Alienware M17x.

  Addendum: Quick links in this Guide

  Driver wireless Dell 5.60.18.8 version
  Download the driver for the Mini PCI Dell Wireless 1510 card used in this guide.

  Broadcom 943xx Wireless Driver version 5.60.18.41
  Download the latest Broadcom driver as an alternative to the Dell a little older driver who may or may not solve the problems more. Some have seen more success than with the 5.60.18.8 drivers with it (you need to use the 802.11n network adapter driver rather than at the entrance to Dell Wireless 1510 Wireless-N WLAN Mini Card in step II.15. the guide when you use this driver).

  Setting advanced properties: Dell Wireless WLAN card User Guide
  Reference Dell official Manual/Guide on the various properties Advanced Dell Wireless cards.

  Card Intel Ultimate N WiFi Link 5300 A/G/N Half-Mini
  Link to buy the demi-mini card Intel Ultimate N WiFi Link 5300 A/G/N of dell.com upgrade the crappy Wireless Dell 1510/Broadcom card that comes with the M17x.

  This Guide is a work in progress. I will update as I hear it.

  Feel free to link it in different threads to disseminate information.

• Tecra 9100 wireless network problem

  I'll have a chance by putting my Tecra 9100 with my home wireless network. The network seems to work very well. My other laptop connects to it without any problems and I can connect the Tecra with the ethernet cable. But the wireless connection, it cannot be successfully established by the Tecra.

  She claims to be connected, but he receives no package, and could get no internet connectivity. When I try to 'fix' the connection, it sits there for a while before telling me that the IP address may not be renewed.

  I managed to connect the Tecra to the network of the next door without penalty, which suggests that there is some kind of problem with our network interface. I tried to reproduce the exact settings from my other laptop, so I don't understand what the problem is.

  Any idea would be appreciated with gratitude!

  Hello

  It's really not easy to say what is happening here. The functionality of the laptop is ok and it's very confusing if it works with other local wireless networks.

  I recommend putting your access point to the factory without some specific parameters settings and try to connect it.

  Sorry, but I don? have another idea.

• Wireless Cardbus - Tecra 9100

  Hello

  I have just re-installed XP SP2 on my 9100 and have downloaded different drivers from the Toshiba web site and even went to the Intel web site and got the specific Chipset drivers, most of the stuff works now.
  But the main problem is the internal wireless card does not function perfectly, it is seen by XP and can connect to my router wirelessly using the key WEP etc but it does not pick up an address DHCP and if I statically configure an IP address in I can't ping anything (loopback ping works) the fixed Ethernet port works fine.
  I also have an external Wireless PCMCIA card which behaves in the exact same way. So the thing in common, that I can see is the Cardbus TI PCI-1410/ToPIC100 controllers, they use the generic Microsoft drivers, anyone know where I can get drivers updated for them? TI website is no help! Or have any other suggestions? (I n t have the recovery CD!)

  Thank you very much

  Trent.

  P.S. Can't display driver to work either the access key.

  Hello

  First you must install the utility chipset on the Toshiba site and not the site of Intel because Toshiba is recommended to install the drivers from the download area of Toshiba.
  If you install the operating system manually (not from the recovery CD) so it is very important that you install Toshiba stuff in the right order.
  After you install SP2 and windows, you must install the driver from chipset from Toshiba site and the common modules. After this installation, you can install graphic driver driver audio, etc.
  Please also check the information of SP2 from Microsoft Update Web site.

  Is it you wireless problem: I think it s a router issue because the two wireless cards can peak t the DHCP address. Well, nevertheless the TCP/IP protocol must be set on automatically and please check if the windows wireless configuration is enabled.
  I recommend also to disable the encryption, then try the connectivity.

• Problem connecting wireless with my Tecra A8

  Hello

  I have problem connecting WiFi with my laptop Tecra A8. When I opened my laptop, it does not connect to the wireless network.
  I tried several ways to solve this problem.
  I updated for active connections, then I click on the Connect button after you select my wireless LAN, but it doesn't connect.
  Or I restart my computer, but it doesn't connect.
  However, it connects to the network wireless in anytime after about 15 minutes.

  Also when I tried to connect to the network wireless at home, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.
  I wonder that there is no problem with installation? Or my wireless card doesn't work?
  Can someone help me?

  Thank you

  > Also when I tried to connect to a home wireless network, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.

  According to the statement, all looks like that you try to use a password for encryption wrong!

• Tecra M1 wireless connection problem

  Hello

  We have a kind of inherited a Tecra m1, we tried to use wireless to connect to the internet.

  First I tried with the sky, the laptop does not accept the digits of the password, it says it must be 13 characters etc, can add this info if you need it, so don't come in line with that at all. We tried to connect with my computer laptop girls and it works with his own, more I went through the process of verification of the modem with the sky, which was all fine and they said back to Toshiba.

  Then I tried the aol connection, with this is accepted my password and it shows it is connected to aol, wireless, but you can't get on the internet when you use Dr. connectivity, its said something on the browser settings, this is where I'm stuck!

  I can take notes tonight all the information required of the laptop to the Dominican Republic of connectivity, if anyone can help please...

  scorpiolfd

  Hello

  First of all, you must make sure that your WLan router is correctly configured.
  I put t know if you use a Mac address swim, but for the first time, you must disable it before you haven t establish the WiFi connection.

  Second, you must check you WLan encryption settings.
  If you use an encryption that is not supported by the wireless network adapter, then you will not be able to connect to the WLan router!

  So please check the type of encryption on the router and check if the WLan card supports this also!

  Usually it s advisable to disable all the security settings on the router, then test the WLan connection. If you will be able to connect to the internet, then you can activate all the security settings step by step

• Tecra A3: Wireless connection problem

  I reinstalled windows xp prof after my laptop crashed and lost files.
  Everything works except for the wireless connection, it is turned on, but windows will not see it?

  Any ideas? I tried to download different drivers from the driver from toshiba support page, but nothing has worked.

  Hello

  When the WLAN switch is set to ON, use the FN + F8 key combination to activate the WLAN adapter. After that do what you will be able to use the wireless network card.

  Wireless network card appears correctly in the Device Manager?

• Touch pad/mouse sticker problem, Tecra s1

  Hello!

  I can't get the touchpad mouse or mouse sticker to function on my tecra s1. I installed the touchpad driver and double score.

  I use an external mouse (ps2 or usb), logitec.
  (I installed toshiba drives after installing drivers logitec.)

  When I click FN + F9 noting happen.
  What is the problem, I need help!
  This is a special order, I have install the drivers?

  Someone who now?

  Hello

  I use Tecra M1 to my work and it's almost the same machine. I use the external keyboard and mouse. In my case, there is no problem and I can use both internal and external devices at the same time. I don't really understand what is happening in your case.

  I just installed driver and a little mouse wireless application given by producer of external devices. I don't know, but the UtilityV1.0.0.2 to toggle DualPoint is responsible for the function FN + F9.

• Windows XP Home, and Tecra 780dvd...

  Hello

  don't know if anyone can help me, I have a 780dvd tecra with winXP home installed, and win98SE. I only use XP for my iPOD connection and transfer music, but built in DVD player the 780dvd (sd-c2002 being the number of the disk according to XP) does not at all. Obviously, I need this for music trnsfer and everything really. I know that I had the drive runs under XP before, but in Device Manager it says that the driver is missing or damaged. When the drive to uninstall and reinstall, it does exactly the same thing! I have not my disk XP with me as I am at the University abroad and Windows XP on microsoft.com home page seems to be very little help, someone has an idea what could be the problem? Maybe some kind of conflict with another device? Although there is no conflict of resources, according to XP. I don't know what the problem is!

  would be really grateful if someone could shed some light on this.

  Thank you.

  Hi shimmy

  It is not easy to tell what the problem may be, but as far as I know it is possible that you have a virus. One of my friends had the same situation. By the virus becomes IDE a yellow question mark.

  Try to make the virus scan first.

• Sat Pro 6100: firmwareupdate for wireless CardBus TI 1410 Lucent ORiNOCO

  Hello

  my laptop is a Toshiba Satellite Pro 6100
  with this wlan card: Wireless: TI 1410 CardBus / Lucent ORiNOCO
  and this firmware:

  Eth1: Material identity 0005:0004:0005:0000
  Eth1: Station identity 001f:0001:0008:000 has
  Eth1: Firmware identified as Lucent/Agere 8.10

  The problem is that the drivers will not work with this firmware.

  eth1: Lucent/Agere firmware does not support manual roaming

  Now, I am looking for a firmware update for this card (I think 8.72 should be the current). The update should work on linux or (if not available for linux) on windows.
  Kind regards.
  Can someone help me that my wlan Runic card with Linux?
  Rico

  Kernel:
  2.6.14 - gentoo-R5

  Hello

  As far as I know that the wireless LAN card is optional on East Unit.
  You upgrade the unit with the wireless network card?
  Well, I put t know you what WLan card, but these cards are compatible

  Wireless LAN Mini PCI Card (2, 4 GHz, 802. 11a / b) PA3236U-1MPC
  Wireless LAN Mini PCI Card (802.11a/b/g) PA3298U-1MPC
  Wireless LAN Mini PCI Card (802. 11 b / g) PA3300U-1MPC

  The drivers for these cards, you will find on the page Web of Toshiba or the Intel Web site. In my opinion, if you use a good card and driver so that all should work properly.

  Good bye