Wireless connection turn does not on

Similar Questions

• Have HP Officejet 6500. Wireless connection - scanner does not.

  Have HP Officejet 6500. Wireless connection. The print function works fine. However, when I try to scan a document, the "no scan option" prompt appear. It seems that the HP 6500 does not recognize either (my desktop or laptop computer)? Help

  Try to install the updates and the usefulness of this link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3944627#N956

  mohanad

• OfficeJet Pro 8600 Plus: loss of wireless connection, printer does not accept the password wireless

  My printer has suddenly lost its wifi connection. It's the only phone connected to my network to do so.

  Through the Wireless Setup Wizard to restore the connection. Assistant tells me that I entered an invalid password wireless, that is not true. (I confirmed that all devices connected to the network using the same password).

  Reset the router (Technicolor of Time Warner). Reset the printer. The 'Restore default network' done. No luck.

  Zero has changed since yesterday, when my printer was working fine. I used the same router for months, do not change any settings. Any thoughts on what may be the issue? A bad update happen?

  Thanks in advance.

  My apologies for the late reply. I managed to get this problem resolved by phone to customer service.

  The security mode of the router had to be changed to 64 WEP for wireless connection to be restored. According to Support HP, it's a common problem with the routers in Technicolor. There was no explanation as to why the printer has suddenly lost the ability to connect wirelessly when safety was created to WPA2-PSK. The network has been configured this way for more than a year.

  I have almost solved this problem on mine (I had read about changing of security in a different post), but ran into a hiccup because of Safari. For some reason, Safari prohibited access to a menu page for my router security settings. You can imagine how boring it is to look at the HP Support use Firefox to access the router and do what a mouse click more, and then I had to make the change. So, if you make this change, be sure not to use Safari to access the gateway of the router Technicolor. Use Chrome or Firefox.

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• 128 GB Canvio AeroMobil Wireless wifi SSD does not

  128 GB Canvio AeroMobile Wireless wifi SSD does not
  am facing problem with this device where I can't find it on my phone or any other wifi device (nothing is displayed on the wifi and cannot connect to the device, direct mode is OK).

  Please help

  Dr. Hamid mohamed

  Any help please?

• Wireless communication switch does not work - Satellite A200 - 23 c

  The laptop has been included, and both a WI - Fi connection stopped working.
  Wireless communication switch does not work. Do not ask is it possible to do?

  Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

  Wireless network card is enabled correctly in Device Manager?

• HP pavilion 15-n019TU: bluetooth, wifi, wireless driver button does not

  Hello

  Bluetooth, wifi and wireless button drivers do not work on my pc for 64-bit windows 8.1 single language.

  I could not find the following hardware ID

  PCI\VEN_FF42 & CC_0D1100
  PCI\VEN_FF42 & CC_0D11
  PCI\VEN_FF42
  PCI\CC_0D1100
  PCI\CC_0D11

  USB\VID_0E8D & PID_763E & REV_0100 & MI_02
  USB\VID_0E8D & PID_763E & MI_02

  ACPI\VEN_HPQ & DEV_6007
  ACPI\HPQ6007
  * HPQ6007

  USB\VID_0E8D & PID_3001 & REV_0100

  I use sp65235 for bluetooth, sp63752 for the driver, sp63317 for wifi wireless button. but these don't work. Wireless led button does not turn. It stays red. Help, please.

  Thanks in advance

  Bests

  Abir

  Hello:

  The bluetooth ID seems to be for a Mediatek bluetooth adapter which means you have a Mediatek wireless card.

  These would be 8.1 Windows drivers you need for these devices:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131396-1&cc=us&DLC=en&LC=en&OS=4158&product=5447189&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130262-1&cc=us&DLC=en&LC=en&OS=4158&product=5447189&sw_lang=

  6007 a need of this driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&DLC=en&LC=en&OS=4158&product=5447189&sw_lang=

  I don't know what other devices are.

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• Wireless Mouse 5000 does not work correctly when moved away from the transmitter.

  I have the mouse as shown in the title with new batteries.
  Link: http://www.microsoft.com/hardware/en-us/p/wireless-mouse-5000/MGC-00017
  My installed OS Windows 7 x 64 SP1. A clean installed on the computer without additional software in the meantime.
  When I connect the transmitter (2.4 ghz v7.0 model 1423) the mouse to the computer, it identifies only, and the mouse works.
  In devices and printers, the transmitter is under indefinite and after installing IntelliPoint 8.2 64-bit for Windows 7, it remains the same.
  Sometimes the mouse does not react on the screen, as it got stuck and moving in parts rather than sequentially. Including the mouse buttons that do not meet at the moment.
  If I bring the mouse close to the transmitter, the problem goes away and it works fine.
  After the test, no relation to the load on the processor, the problem appears randomly.
  I tried to replace USB ports but no change, the problem goes away only if I put the mouse close to the transmitter.
   
  Original title: Wireless Mouse 5000

  Hello Tomer,.

  Thanks for the reply.

  You can check the following items and check if it helps to solve this problem:

  The wireless keyboard or mouse may not respond and may start and stop at irregular intervals
  Troubleshoot a wireless mouse that does not correctly
  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  If the problem persists always, as mentioned above, contact Microsoft Hardware support for assistance. All material related to problems are treated by them.

  Email us if you have any other issues related to Windows.

• Canvio connect II does not work on Mac

  I have a canvio connect II and I had to format it because Windows 7 does not recognize, I did said Toshiba, for formatting so that the hard disk has unit. I formatted with NTFS and my problem is when I connect my Mac hard drive, I can't save anything, I can't make a backup... Then my canvio connect II does not work in my Mac.
  How can I put all the software that had my hard drive? Where can I download them? How to install?

  Thank you!
  Alberto.

  I saw in the toshiba tutorial this hard drive driver "Tuxera NTFS for Mac" it allows to read and write data in Mac and Windows, how can I get this driver?

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

  Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

  Moved from feedback

  Original title: WiFi

  Hello

  1. what version of Windows is installed on the computer?

  2. is it works much earlier?

  3 have there been recent changes made on the computer before the show?

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

  If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

  If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

  This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt.

  To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

  For more information, see the link.

  Wireless Zero Configuration Reference

  Please post back with the results and we will be happy to help you further.

• Update my wireless network device does not work after installation of Software Distribution Service 3.0

  After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0

  How did you receive the update?

  Was it via Windows Update or Microsoft Update?

  Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.

  Follow these steps:

  1. click on the Start button

  2. click on accessories

  3. click on system tools

  4. click on system restore

  5. click on next

  6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next

  After the collection of certain data, the computer will restart, and the update will be gone.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Bank accounts is not available. connection icons does not

  Bank accounts is not available. connection icons does not

  Hello

  Thanks for the above information.

  1 have you tried the methods mentioned in the post above?

  I suggest you try the steps from the link below.

  You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444

  Registry warning

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://support.microsoft.com/kb/322756/ )

  If the problem persists then I suggest you contact with the support of Barclaycard from the link below.

  http://www.Barclaycard.co.UK/personal/contact-us

  Hope this information is useful.