Wireless drops

I just upgraded to Win 8 Pro of Win 7 Pro. I own a Sony Vaio VPC - SA Core i5, 8 GB, 500 GB Seagate HD, Intel Centrino Advanced-N 6205 wireless adapter memorable XT.


When I boot Windows 8, the computer starts just fine and is connected to my WiFi network as usual. I noticed that it happens more when you use the Office of Metro, but when browsing around usually (in applications, news, store or video), I get an error of lost connection. When switching on the desktop, I see my connection is either fallen or has a limited/no connectivity, but it still shows that plugged when I try to connect again. I usually spend my adapter/disable to fix it quickly, but when it does not work I run the Troubleshooting Wizard that is that wireless service has stopped. This happens repeatedly until it becomes stable at random at a later time. Drivers are installed and are version 14.2.1.3. Well, my internet seems my mobile phone/Tablet/xbox/other do not drop, but as a precaution, I rebooted the router and the modem. Any suggestions?

Debbie,
Thanks for the reply. My router looks fine, because it affects only the instance of Win8 installed. All other devices and installation of Win 7 on the same PC worked fine. I did a "system refresh" 8 Win which has corrected the problem. I imagine that there is an incompatibility with a driver or a program that has been imported from the update. All better now, thanks for the help.

Tags: Windows

Similar Questions

  • HP G6 1b60US - Ralink wireless drops every 30 to 60 seconds. Ethernet is fine.

    HP G6 1b60US - Ralink wireless drops every 30 to 60 seconds.  Ethernet is fine. I tried a USB WiFi and it works perfectly.

    That's how I test: run CMD, ping google.com t

    With this race in the background is very easy to see the question.

    I tried earlier versions of the Ralink drivers, nothing solves the problem.  What is interesting, it is same when I'm on WiFi from UBS, if the Ralink is not disabled, there will always be the question.  (Although I am CERTAINLY connected via USB wifi.

    It's a real pain, since I use Remote Desktop a lot, and whenever that happens, my connection to the DRC crashes.

    Problem solved!

    My old Linksys WRT54GL router has been arrived in mixed mode (B/G).  All I did to fix this was set to G only.

    So if anyone runs into this problem, be sure to try this change.

    Thanks again Paul, to help him.

    George

  • SL510 then reconnects wireless Drops

    Hello.. I am a new user of Lenovo and need help. My new SL510 (2847-9XU) has a signal strength of 99% of reading and is connected to 54Mbps. suddenly, the connection drops. A few seconds later, he reconnects on its own. This repeated regularly.

    I enabled the wireless diagnostics logging. I don't know how to read the information, but the disconnection and reconnection activity can easily been seen by the reds entered in the journal.

    I'd appreciate any help, or at least how to record a real support for this request. Can I send the paper to someone to take a look?

    -Earl

    I tried to change the energy saving settings, and that has not changed the problem.

    Which seems not to have worked, however, is that I found a checkbox in Access Connections/Options that says "allow the WLAN radio be turned off when idle." I unchecked which and the problem has been corrected.

    Thanks for your suggestions.

    -Earl

  • Wireless drops IE7 but emails still send and receive the Satellite Pro L20

    I will try to write this, so it is logic-

    Satellite Pro L20

    Card Atheros AR5005G Wireless - Driver version 7.6.0.130

    Windows XP, Office 2003, IE 7,.

    Router Netgear WGR614 v6 wirless.

    When using a product like Utorrent my conection sharing internet it falls P2P file comes with - cannot display the page - usually I select the network diagnostics and he responds with consult the manufacturer of your computer for help.

    E-mails still send and receive ok - my wife on her cell phone can still access internet ok (so I don't think it's a fault of router)

    After I close the application down and let it during 5 minutes to share files so I can access the internet. If I connect directly to the router via a cable that I have all of the problems that makes me think it's a fault of the wireless adapter

    Can anyone help?

    Thank you very much

    Alex

    Hello

    Eventually the large amount of data that occurs during the influences of P2P file sharing or Skype session of the internet connection.

    Sometimes this question is displayed on my laptop if 2 or three laptops are connected to the same router.

    However, have you tried a few solutions stallions like WLan driver updated for example?

    Please check the Toshiba Wlan portal and install the latest version of the driver:
    http://APS.toshiba-tro.de/WLAN/

    Good luck

  • TECRA S2 when battery charging, Wireless drops every 5 min

    Hi, I have a very annoying problem.

    When I'm surfing wireless at home I have no problem, but when I start to charge my battery, wireless turning off every 2 minutes or so to reconnect immediately.

    This problem does not exist when I am in charge battery next to the wireless router. Only when I'm in the living room.

    Is that what someone else has this problem or is - someone has a solution for this?

    Post edited by: jeetn

    The wireless network card supports different options. In the Wlan card properties, you should find a tab advanced.
    There you can change different settings. Please try to disable the power save option WLan Card.

    I don't know if it helps but you know train is free ;) m

  • Wireless drops at the end of ten minutes

    I have a laptop HP with XP. At the start, it works very well through the wireless connection. After ten minutes, he gave up the internet connection saying TCP/IP is not configurres / unable to connect to the DNS service. I have to restart to connect to the internet again.

    Any help is appreciated.

    Santu

    Hello Santu Mullur,

    ·         Remember to make changes later?

    ·         Which antivirus program is installed on the computer?

    You can check if this article helps.

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

  • Wireless drops every 2-3 hours in PC HP Pavilion dv6330ea

    Hello

    Model No. - HP Pavilion dv6330ea laptop. Check out the link http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&d

    My OS is Vista Home Premium 32-bit.

    Recently scanned my system with Intel® Driver Update Utility, it automatically identify and find drivers and maintains the system to date. It detects the driver updates are relevant to our computer.

    I scanned my system and here are the results

    Graphics driver
    NVIDIA GeForce Go 7400 detected product current Driver Installed 7.15.11.7991 this device is unknown or not supported. Contact the manufacturer for possible updates. More information >

    Intel Chipset Software Installation Utility (INF Chipset)
    Intel® 6, 5, 4, 3, 900 Series Chipsetsdetected product latest Version installed 9.2.0.1025

    This version is valid.

    Audio driver for motherboard Intel
    Product detected Bluetooth hands-free Audio current Driver Installed 6.0.1.3100 this device is unknown or not supported. Contact the manufacturer for possible updates. More information >
     
    Wireless network card (WiFi)(Newer Driver Available)
    Intel® PRO/Wireless 3945ABG Network Connection driver current 11.5.0.32 detected product a more recent driver available: 13.4.0.139 Download now file size: 7,103 Mo detailed Description driver & Driver Documentation
     
    Wired networking
    Product detected Intel (r) PRO/1000 PL Network Connection current driver installed 9.12.36.0 this device is unknown or not supported. Contact the manufacturer for possible updates. More information >

    --------------------------------------------------

    So my questions is that I go with the update or not, considering that there are no new updates available through hp update.

    My wireless connection is getting deleted every 2 hours or 3 hours, I need to disable and re-enable my wireless connection and then it detects my wireless network and finally the connection is established.

    OR

    Sometimes it does not find my wireless network, but it is my neighbors wireless very well. I need to disable and re-enable my connection Wi - Fi 3 or 4 times and network is established.

    But when I connect it to my laptop through LAN IE with cable and internet, then falling at all.

    my modem is kept near my laptop and some time wireless connection is lost again.

    Q1] this update will allow you to solve my wireless problem?

    Q2] I will proceed with this update or not?

    Q3] or how to solve my wireless problem because it cuts every 2-3 hours.

    --------------------------------------------------

    Why it dint find my device in my system. why it showed this error this device is unknown or unsported for Graphics Driver, Audio driver for motherboard Intel and Wired Networking

    --------------------------------------------------

    Good bye

    Hi Siva,

    You used the Intel® driver update utility to check the cell for the driver updates.

    As regards to the Nvidia Geforce card goes, it would be desirable to obtain the latest drivers from the Nvidia site.

    http://www.nvidia.com/download/index.aspx?lang=en-us

    We cannot be certain as to why cable and audio network drivers cannot be identified.

    Because the utility identified Intel as an update of the driver is available, you can go ahead and install the update.

    It may or may not solve the problem.

    If there have not been any changes made to the system, it might be issue with the router as well where it could be disconnect you.

    To proceed with the update of the driver.

    Let us know if it solves the problem.

  • Wireless drops/exit only on my laptop

    Using a gateway NV77H05 with Windows 7.  We have free WiFi in the House.  Wireless continues declining output for my laptop, when my Iphone and the other computers in the House are always connected.  It only started happening last week.  I've been using portable successfully since January.

    Hello

    You did changes to the computer before the show?

    This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

    Method 1: Disable authentication IEEE 802. 1 X
    To disable authentication IEEE 802. 1 X, follow these steps:

    a. Click Start, type ncpa.cpl, and then press ENTER.
    b. right click on your wireless network connection and then click Properties.
    c. click the wireless networks tab.
    d. under preferred networks, click your wireless network, and then click Properties.
    e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

    Method 2: Remove and re-create the wireless network connection
    To remove and re-create the wireless network connection, follow these steps:

    a. Click Start, type ncpa.cpl, and then press ENTER.
    b. right click on your wireless network connection and then click Properties.
    c. click the wireless networks tab.
    d. under preferred networks, click your wireless network and then click on remove.
    e. click on view wireless networks.
    f. under management of the network, click Refresh network list.
    g. under Choose a wireless network, click the wireless network to which you want to connect, and then click on connect.
    (g) also I recommend you update the NIC drivers and check.

    Additional information:
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • Wireless stall in Qosmio X 70-A

    Hello

    I have a Qosmio X 70A & almost since I bought it there was issues with the wireless dropping out.

    I check my router etc. & it's all very well so there must be something with the laptop.

    I disabled the feature of saving power supply attached to the wireless as I know, it's a problem for some other Toshiba, but it is still down & seems to be deteriorating.

    Any suggestions?

    > I have check my router etc & everything is perfect so there must be something with the laptop.

    Well, perhaps that is not a router issue, maybe this isn't a Wlan card is perhaps deliver the s a combination between the router and the wireless network card?

    N my opinion you should test different scenarios:
    First check how the laptop would serve with an open WiFi.
    I mean by open Wlan Wlan that isn't secured by a WiFi encryption (WPA, etc.)
    Of course this must be done just for testing purposes.

    In addition, you need to test different standard WLan 802.11 B, G or N different channels.
    As far as I know, you can change it in the properties of card WLan (Device Manager-> card WLan properties-> Advanced tab). Here you will also find a power management tab. There is an option that allows you to disable the device. This must be unchecked.

    Last but not least check whether WLan driver update would improve the Wlan connectivity

  • Bad wireless connection made account Satellite L500-1DT (Win 7-64 bit)

    Hello

    I hope someone might be able to help me with this problem. I brought a L500-1DT for my daughter elder for Christmas (and birthday) but I'm having problems with connecting to my wireless router. From his bedroom (to about 10 meters), it is luckly to get reception of 3 bars (out of five) and is wireless drop outs. This means that MSN comes at a critical time... Well she is only 16, so everything on MSN is critical.

    At first, I thought it was the former wireles router (my wife has problems with her IBM laptop and the other children of their Acer laptop) so I got a new Belkin router N (150). This seems to have solved the problem with Toshiba laptops not but there are still problems with the L500-1DT. If I have the Toshiba laptop computer in the same room as the router I get 4 bars (out of 5) at best.

    I checked for if ensure that there is no more recent driver updates and checked all the settings (more than once) and I'm at a loss as to what I do now. Is the defective laptop or I missed something?

    Kind regards
    The Build master

    > If I have the Toshiba laptop in the same room as the router I get 4 bars (out of 5) at best.
    4 of the 5 isn't bad Companion.
    It is ok...

    But if you want, you can check if a new BIOS is available for this model of laptop...
    If so, you can try to update.
    In addition, you can try changing the WiFi channel. The router and the wireless network card must be on the same channel.

    In the Device Manager-> properties-> Advanced tab Wlan card, you can change some settings.

  • WRT 1900ACS removes wireless LAN file transfers and internet connection

    I have WRT1900ACS which is declining by almost every file transfer wireless LAN I get out of a wireless laptop to a PC connected by cable; So far, I'm using the latest firmware version: 1.0.1.174588 and both are version of Windows 10 PC 1607.

    When I transfer a lot of small files, the transfer stops after about 2-4%, drops wireless connection and the adapter will not reconnect. I have to restart the wireless computer to get the wireless adapter to connect again.

    This would seem to indicate a problem with wireless network card driver. The same id of the event was logged in the forum thread below:

    http://www.techsupportforum.com/forums/f338/Windows-10-wireless-drop-out-1057898.html

  • DeskJet 3510: AirPrint works bad

    I had this problem before when my last router died. It took 5 days and hours on the phone with a screen sharing my computer technician to fix because the patch had not yet been released for the Mavericks. I pray it is not always the case / case with Yosemite.

    My roomba accidentally unplugged my router. When I connected again and he cycled through his startup, all my devices (Mac, iPhone, iPad, PS3 and AppleTV) reconnected to the network wireless without problem. The printer does not have. I uninstalled the wireless printer and reinstalled using the HP Setup Assistant. Now, I have been able to print a document and a test page for my Mac. However, it does not appear as an option on my devices (iPhone, iPad) wireless and the wireless AirPrint and ePrint lights on the display will Flash. The printer itself does not believe that it is connected to the wireless network.

    I need this printer to work wirelessly for all my devices, plug in is not an option that the cable is not long enough. Help, please!

    I have OSX 10.10.1 (Yosemite) - this was not an option in the menu drop down.

    Thank you.

    Caroline

    Hello csharp7,

    Welcome to the Forums of HP Support!

    I would like to offer some suggestions to help get the 3510 Deskjet connected to your network. Since wireless light flashing, it seems better to restore the default values of the network to the printer and start over. To do this, setting > wireless > default settings.

    Once restored, the lights may turn off as default values are sometimes set off. Back to setting > turn on Wi - Fi and wireless and wireless live. On your Mac, go to the Wireless drop-down menu and join the network printer. Open a web browser and type 192.168.223.1 in the address bar and press ENTER.

    Click network, click (left) wireless configuration wizard. Go through the steps and select your network, etc. Once connected, the printer WiFi light should be solid. Connect the Mac to your network and try to print.

    If you are unable to print, open the system preferences > print and scan. Delete the printer, click on the + button and add the printer to the back. Try to print, if successful, try the iPad / iPhone.

    * Power of the iDevice cycle may be necessary to re - sync with the printer via develop *.

    I hope this helps, let me know!

  • HP Pavilion DV6-7070SE: Broadcom 4313 802.11b/g/n abandon the connection lately

    Greetings,

    I'm planing to spend my wlan to 5 GHz because that starts them currently installed connection every few hours.

    Please advise on the correct module (P/N) for the 5 GHz model.

    If not supported, please refer to the best module that corresponds to my laptop.

    Thank you

    Hi @slimmy10 ,

    Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion Notebook dv6-7070se and the connection Wireless drop. Before changing the wireless card, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels, and sometimes it helps.

    You could disable IPv6 for the laptop. Some say this helps.

    Solve this problem Microsoft Fix it 50413.

    Here is a link to help as well.

    If you still feel the need to change the card to your laptop wireless. Here is a link to page 52 of your manual for cards supported wireless.

    Hope it will be useful.

    Thank you.

  • LaserJet cp5225dn: laserjet cp5225dn firmware update is possible on network?

    I want to update the firmware on my Laserjet CP5225DN 2013. Instructions for downloading that the printer must be connected via USB. But when I run the exe firmware on my windows 10 desktop, it finds the printer on the network.

    I can possibly ruin my printer when trying to run the update of the firmware via the network instead of via USB?

    In order to run the update via the USB port, I have to carry the desktop PC to another from one end of the House.  All laptops that we have are macs, and the update of the firmware only works on a PC.  I expect a professional printer to be easier to manage than to require a USB connection, but I dream?

    Thanks for any help you can provide, as the warranty has expired for a long time.

    MJ - lee

    The instructions are as they are for a reason. Wired connection for firmware updates is always better. If wireless has been used and the wireless drop in the middle of the update, your printer can be roasted.

  • Vista will not connect to WiFi automatically (but my iPhone works well!)

    After re-installing Vista window by the backup of my laptop LG drive, it is now impossible to automatically connect to the WiFi at home. Every time when I start the laptop (even of mode "sleep"), the network went & I have to choose WiFi home network once again, enter the golden key to restore the link.

    Once connected successfully, I have click the box "automatically connect to this network Bud future." It simply doesn't get it!

    I opened the network & don't Sharing Center--> WiFi Admin, there is no recorded inside the priority of connection WiFi network. However, I have my laptop connected to the WiFi at home, Office WiFi manually for time.

    Really hope someone can help out me!

    Hello
     
    Windows can be disable your network adapter to save power. Disable the power saving option in the network adapter properties. To do this, try the following steps.
    1. click on start, type devmgmt.msc and press to enter.
    2. from the list of objects, expand network adapters.
    3. double-click on the sub element that means wireless network cards.
    4. click on the power management tab.
    5. clear all the options on the power management tab.
    6 apply the settings, and then restart the computer to check the difference.
     
    We recommend that you also download and install the latest driver for the card from the device manufacturer's Web site or system wireless.
     
    Download and install the latest service pack on the computer. See this article for more information: http://support.microsoft.com/kb/935222
     
    Check out these links for more information:
    1 solve problems, find wireless networks: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-finding-wireless-networks
    2. wireless connection is periodically lost: http://support.microsoft.com/kb/814080
    3. wireless card WIRELESS drops every few minutes: http://support.microsoft.com/kb/814123
     
    I hope this helps.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

Maybe you are looking for

  • Remove the download to iPad Mac

    Hello: I'm going to buy a new iPad Pro and have an iPad in 2012, I backed up the old iPad via iTunes on my Mac. How can I delete the backup of my Mac?, the backup is 10 GB + and I didn't need in my office more after the transfer to the new iPad.  Tha

  • Power power on Equium A60-157 problem

    My father recently corrected this laptop for my children to use, but we are having big problems with the battery. When the laptop is plugged in and turned off the battery recharge, when I turn on the laptop, the battery is displayed on the status bar

  • Tecra 550CDT: where to find the compatible DVD player?

    My father has an old 550CDT and wants to replace the CD with a DVD player. The connector is different to modern readers. What do you call the conector type?Is there any slot-in DVD for the 550CDT?I'll have to get a USB connector and use a standard pl

  • repair of 0x6976ea96 installation error

    I have seen this in many places, but no one has posted a solution. The MS Malware tool found a virus so I ran repair on your desktop-oem XP sp3 after that I got rid of the virus. During the phase of component to register, I get the error "unknown sof

  • Can't find Sticky Notes!

    Can't get Sticky Notes under accessories in the start menu. Recently, I ran a software shortcut Fixer and I think that he got rid of sticky notes. What can I do to get it back?