Wireless location appliance

Similar Questions

• Accuracy of wireless location

  Hi all!

  When you use the series 2000 or 4400 series location, with a series of APs - what is the General accuracy to locate the APs or Tags?

  / Kelvin

  My sources say his remarks within 10 feet and the shrinking technology advances. I'd love to see down below 1 foot. It would really make some specific things

  Hope this helps

  Please do not forget to rate answers

• Features of WCS and order info

  Hello!

  as described in:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd802570d0.html

  More Cisco WCS

  • Support of Cisco WCS deployment on a single server

  • Supports mobility services enablement, availability and the ability to track the location of a single device Wi - Fi or tag on request

  and

  Cisco WCS location

  • Support of Cisco WCS deployment on a single server

  • Includes location services to support the follow-up of a single Wi - Fi device on request or location extended functionality by adding a Cisco wireless location appliance.

  • Cisco WCS location must be installed to support the deployment of a Cisco wireless location appliance.

  This means, that permits tracking of clients by WCS interface without deployment of the location device?

  What are diffirences between MORE & LOC licenses? (There is no difference between WCS-STANDARD-K9 + WCS - APLOC - 50 (or AIR-WCS-WL - 1.0 - K9) and WCS-STANDARD-K9 + WCS - PLUS - 50, instead of HA on PLUSlic, isn't?)

  You can follow a single customer by drilling down to the client without the location device.

  Adding the location device allows you to track several client/tags/thieves on the cards that you configured.

  Basis was without location.

  More (change of name of place) is the basic + location.

  These are old reference numbers and should not be used:

  AIR-WCS-WL - 1.0 - K9 (location of Windows)

• WCS & navigator WCS

  difference between WCS WCS & navigator. even software or other?

  Hi Nitin,

  These are "not" the same products :) Here is the hierarchy;

  WLC - manages AP

  WCS - manages multiple WLC

  WCS Navigator - manages multiple WCS

  Here is the description of each product;

  WCS-

  Cisco Wireless Control System (WCS) is the industry leader for planning LAN wireless, configuration and management. Cisco WCS provides a powerful foundation that allows managers to design, control and wireless networks to monitor from a centralized location company, simplify operations and reduce total cost of ownership.

  The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco Wireless LAN controllers and the Cisco wireless location appliance. With Cisco WCS, network administrators have a solution unique to RF prediction, policy provisioning, optimization of the network, troubleshooting, tracking users, control systems wireless LAN Security and management. Robust graphical interfaces are simple and cost-effective wireless LAN deployment and operations. Detailed trend reports and analysis are Cisco WCS vital for the operation of the current network.

  Cisco WCS includes tools for wireless LAN planning and design, RF management, localization, Intrusion Prevention System (IPS) and wireless LAN configuration systems, monitoring and management.

  WCS Navigator-

  The Cisco WCS browser can support up to 20 Cisco * management platforms WCS with manageability up to 30,000 points of light Cisco Aironet® access from a single management console.

  I hope this helps!

  Rob

• PROBLEM: M50 - 164 (satellite) Netgear WGT624 wireless

  Hello
  I've just set up a Netgear WGT264 wireless router on my daughters (1 MB) cable Modem. The router works fine and all indicators work, including the LED of radiation. We can connect via RJ45 Ethernet and we can surf and Messenger, so all OK.
  However, does not seem the Tosh 'know' wthat there is a wireless local area network - we cannot connect if the RJ45 cable is removed.
  I tried to configure the on-board Tosh and the small and LED on the front is on and used the radar LAN wireless location, but didn't get any results. I just get a popup telling me to go on the "wireless device".
  The integrated Tosh and the compatible Netgearlook, the two 802. 11 a/g, but I have no indication whatsoever of any activity.
  Tosh is able to 'see' the Netgear independently to know if I have correctly configured (plug 'n play) style?
  The online manual, under LAN wireless, said that some computers in this series are configured with a LAN mini-PCI Wireless card... If there is a switch wireless on the front, that means there is a map on board, or do I still need a mini-PCI card?
  Help me, please...
  Steve

  Hello

  Generally the fault 10 code should be solved by the re - install the latest drivers and uninstall and reinstall the device.
  Please see the page of the Toshiba driver for the right driver and try to reinstall wireless driver. Once this procedure please check device manager if the exclamation yellow mark doesn t appear.
  Please don t forget go on air wireless with FN + F8 key combination.
  If that fails to solve the problem, then I'm afraid the device may be dead and must be replaced.

• HP 550 laptop wireless button willnot turn on?

  My HP 550 Windows xp pro worked fine, then the lan/wlan switch said yesterday it has been disabled, I followed the steps in the bios f10 Setup and it turn off then to activate the switch.  The wireless located next to the power switvh stays amber and will not pass on it.  How can I fix it?

  Hello

  You should contact HP, it could be a hardware problem.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• can I use wrt54GS as wireless extension?

  Hi, I just want to know if I can use old router wrt54 GS as a wireless extension? Here is my story, I have a router WRT54G2 wireless located on basement and I have laptop connected through wireless and connected via ethernet, now these two portable it is a place of office can't signal usually if your in the deadspot room and I heard I can use my old router as extender but don't know how can do? If possible, pls, tell how. Ad in advance thank you appreciate it. good day to all

  Hi tuts69!

  Welcome to Cisco Home Community Forums!

  Unfortunately, it is not possible to extend the networks with the WRT54GS wireless since it does not have the connection ability. However, you can run a cable to him and set it as an access point. Here's how:

  Nesting of a Linksys router to another router

  I hope this helps.

• Location of loading on WCS software

  Hello

  I try to load the software on WCS location via the WCS interface and not CLI device and I'm running into some problems.

  I am currently on version 4.1.83.0 with location and 2.1.39.0 on the location device.

  The device's sync would be with WCS, but every time that I try to transfer new software, I get the following error message:

  Error: Unknown Exception occurred. If the problem persists please send logs to technical support

  I tried several versions and I am following the guide of upgrade on CCO is not very good

  I'm confused at what you're trying to do. This new software you are trying to load? the code?

  -What are you trying to do?

  http://www.Cisco.com/en/us/docs/wireless/location/2700/quick/guide/li31main.html#wp1048000

• FF4580 cannot connect wireless - Windows 8

  I historically used the HP F4580 under XP and Windows 7, but not wireless.  I have a new PC running 64-bit Windows 8 and I try to re install the F4580 but would prefer that it works wireless.

  I downloaded the software and the drivers from the HP site and the printer works fine using a USB connection.

  I am trying to convert from USB using the installation of HP Wi - Fi and it states that my SSID is not available. Even when I type the SSID it States is not avaialable.  He told me then the printer that I have chosen is not connected.

  I added the printer by using the mac address of my router as a reliable source.

  I configured directly from the device by using the wireless network wizard and has an IP address of the printer.

  States printed scan wireless located upward and running and works well, but I cannot print to it wireless.  As soon as I remove the USB printer is not available.

  I tried to delete the printer and restart and reinstall.  I disabled antivirus and firewall, but still can't print wireless.

  Someone at - it other ideas or have I missed something really simple.

  Thank you

  Hello

  Please download the following tool when (a) your computer is on the internet wireless (b) the printer is connected to your computer via a USB port and works and the WPS is enabled:

  http://ftp.HP.com/pub/softlib/software12/COL44840/MP-115766-2/hppiw.exe

  The tool will ask you to convert the USB wireless, please say Yes. It will ask you to accept the SSID, security key... It will try to connect to the router with the existing information from your computer and download the full feature software and drivers and install for you.

  Kind regards.

• Low speed on Wireless N

  I'm trying to implement a DV6 on Wireless N. I have a Linksys WRT160N router and get speeds up to 120mbps on a desktop wireless located near 100 feet from the router. I can not get over 54 Mbps on the laptop, even within 10 feet. I checked the properties of the device and verified that the width of the channel is set to AUTO and 802.11n Mode is ENABLED. I noticed the rest of my system below specs. Any help would be appreciated.

  LAPTOP MODEL: HP DV6

  Operating systems: Windows 7 (64-bit)

  RAM: 4 GB

  WiFi ADAPTER: Intel WiFi Link 1000 BGN

  PILOT: 13.0.0.107

  ROUTER: Linksys WRT160N

  FIRMWARE: 3.0.02

  After much research, I believe I have solved the problems with the Wireless N of low speeds, especially with Intel WiFi Link 1000 BGN configurations. Here's what I could learn from Intel support forums.

  "The IEEE * 802.11n draft prohibits using high throughput with WEP or TKIP as the unicast encryption algorithm." If you use these methods of encryption (WEP, WPA-TKIP), your rate will be reduced to 54 Mbit / s. Intel® WiMAX/WiFi Link 5350, Intel® WiMAX/WiFi Link 5150, Intel® WiFi Link 5300, Intel® WiFi Link 5100, Intel® WiFi Link 1000, and Intel® Wireless WiFi Link 4965AGN client drivers connect using a legacy IEEE 802.11 g connection rather than failing to connect altogether which complies with the IEEE 802.11n draft standard. "This means that you must use a connection Wi - Fi Protected Access * (WPA2-AES or WPA2-TKIP).

  I have reset the wireless security on my router to use WPA2-AES, reconfigured my laptop for the same security settings and options was immediately connected to more than 200 Mbit/s.

• MSE vs WLA

  What the series different Cisco MSE 3300 wireless (WLA) Cisco location appliance?

  Hello

  See this link on ORC for more information:

  http://www.Cisco.com/en/us/products/ps9742/products_tech_note09186a00809d1529.shtml#topic5

  In essence, the MSE has more complete localization functions such as TDOA (time of arrival difference) as well as of RSSI (which takes care of the WLA).

  However as well as the features of location, it also provides integration to the Cisco FMC (Fixed-Mobile Convergence) solution to provide the call transfer between mobile phones with double support GSM and WiFi and Wireless Intrusion capabilities when APs are deployed in monitor mode only.

  MSE versions differ in the number of devices is supported on a single unit, with the support of 3310 until 2000 and the 3350 up to 18000.

  I hope this helps.

  Thank you

  Russell

• Reassemble Satellite A30

  Hi all, beginner's.

  It was so great to have the Satellite A30, that I had to disassemble it had broken pins in the external power Jack and the total repair cost!

  Motherboard has been returned with the new socket and I put it back together again. BUT, there are two wires (a black & white one ending in the endpoints rubber, almost as if they should be able to fit into two pins somewhere) that come from the display unit and disappear into slot oblong m/Board.

  No one knows where they are connected - PC repair shop suggested they floated around the bock wireless on M/Board - I would like to know the location appropriate for them.
  Robin

  Hello

  These two mysterious son belong to the antennas wireless located in the cover of your screen and the little Gizmo on each wire is equipped with a mini-coax plug. The white wire is the main antenna and the black is the auxiliary. , so if you connect the wires on a map wireless take care and check the connector on the wifi card to one that is the main and auxiliary

  Hope I could help you.

  Welcome them
  Dennis

• Transfer logins again portable profiles?

  I just received a T420s to replace my T61. Is there an easy way to transfer all the profiles of wireless location from the old machine to the new machine? I use the logins on the two machines, both have the latest versions.

  Open the location profiles logins, and then select export only the profiles that you want to move to a file. On the new system you then just import them.

  

• Wifi connection first

  I tried to connect to the wifi area with a Belkin adapter connected to windows xp pro desktop pc. When I'm Home I can get several wireless stations local but none in wireless location. I tried to connect my linksys router and have my adapter connect. He worked at the location of the wifi but not Internet and no locaton present wifi signal. Also no wifi in view. Is my lack of wifi or problem signal weak or what I need to do something more? Thank you

  Housing is a former brick hotel. The room is on the 6th floor. The street has a sign indicating that it is a free area of fi wi.

  When I positioned the belkin adapter it's out the window. It is not the most powerful adapter. I need a new one and bought a more powerful linksys adapter makes 1,200 feet. Maybe he will.

  Is it possible to transmit to my pc with the card without going through the router? When I finally used the router at home, he was connected to an optical fiber dsl line. I had other signals that were encrypted and unavailable. What I don't understand, is why I don't get any signals at this new location in downtown.

  When I first started all I got a message saying that I had no connection. I then installed the router, put in the web code and was able to go wireless to the router.  .  My cell phone works on the same site. Of course, it's the way to learn this stuff... What is an outdoor antenna? Is it similar to those who bring TV signals or is this another special feature?

• make a newspaper to the unsecured network secure

  How can I make my current wireless location log-on a course when the only one I can

  choose is not secure?

  Hello

  What exactly you are connect to?

  If this is your wireless router, read the manual and it will have instructions for how ro secure its connection.

  If you are connected to something else and it is not personally yours, you cannot change security, only the owner can.

  Jack-MVP Windows Networking. WWW.EZLAN.NET