Wireless printer connected to BT Infinity

Similar Questions

• laptop to wireless printer connectivity

  I have a locked box truck in which I want to set up a wireless network between my laptop and a wireless printer. My laptop has internet connectivity via an aircard card. A basic router will solve my problem? There is no modem, only the laptop and printer wireless, in which I want to connect wireless. Any help appreciated.

  Thank you

  You don't need a router for that.

  Without a router, you can create a wireless ad - hoc between the laptop and the printer.  See, for example, http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00205926

  Many successes of Google more

  The security problem is that XP does support (easily hacked) WEP encryption in wireless ad-hoc mode. On the other hand, nobody's going very far from trying to connect to your printer. Just make sure you don't leave the laptop to active ad hoc wireless network when you are not printing.

  If you get an inexpensive wireless router, you can connect the laptop to the router by an Ethernet cable or wireless.  In this configuration, you will be able to use wireless more secure (WPA or WPA2) security that supports the link (computer or printer).

  In both cases, do not install (or disable) sharing files and printers for Microsoft Networks in the properties of the network card on the laptop.

  Of course, the three devices, only the laptop is likely to be able to operate without available 110vac, you will need to buy some sort of power supply to convert the truck 12VCC power.  Make sure that you add the requirements of power of the appliances that you will probably use in order to get a converter with a sufficient capacity.  I don't have any specific recommendations, but I don't tell you want it a little and do not go for the cheaper product.

• HP Pavilion 15 laptop: wireless printer connection

  I have HP Pavilion 15 Notebook PC I want to use it with my wireless printer. When you try to print a message arrives and says denied because I'm on a metered connection. What is a connection counter?

  Hello

  A connection counter designed to limit the use of data to avoid charges.

  You can disable this by following the section "How can I change my current MDI (or non-dosed) network connection?" below:

  http://Windows.Microsoft.com/en-my/Windows-8/metered-Internet-connections-frequently-asked-questions

  Shlomi

• PhotoSmart Premium 309 a: wireless printer connection

  According to the configuration information, the computer is connected to the same network SSID as the printer but when the printer configuration wizard attempts to establish a wireless connection between them, an error comes up saying that they are connected to different networks.  A network address is 10.0.0.0 which seems to be OK, but the other is 176.0.0.0, which is the address of the Netgear router, rather than the network wirelessly with the specified SSID.  The router is the one providing network connections with the SSID specified by the computer and the printer, then why the connection does it not work?

  You can fill mode yourself.   You have the right to set up your device to your ISP gateway

  Here's the manual.

  www.danwilsonsoftware.com/DL/3801HGV.Manual.PDF

  Bridge mode is supported.

• Lexmark wireless printer connects to the Acer laptop.

  My printer lexmark series 400 and Motorolla phone Wireless will not connect to my laptop w/mic adapter to Acer4520,

  can someone advise?

  What happens when you try? Lexmark support say?

• Wireless printer connection

  I have a HP 3520 printer. Works fine until I got a BT HOME HUB 5. Now, it does not preserve its wifi connection. I have to go to printer turn off wifi and turn it back on. It is wireless and works. If I use it for about 30 minutes she loses again. I tried specifying an IP address so now always, it is the same IP address but does not keep its connection. Any suggestions?

  Thank you. I tried it without success. I think that the BT hub is just not enough. I bought another router and plugged into the BT Hub and use it to transmit the wireless signal. Problem solved. WiFi signal much stronger Round House.

• Debugging a "Wired/Wireless Printer connection.

  Suddenly, I have a problem with my printer Epson WF4650 age of 1 month. My setup at home is fairly simple

  (1) printer is wired (Ethernet) to a classic Netgear router

  (2) I have two laptops (the two Dell laptps) that print (a Vista and a Win7) wireless to my router (and it allows access to the printer)

  (3) things worked pretty well, although I often had a message for the dialog box 'Printers and devices' under the State which is "error - printing". He would go from time to time, I would cancel the job and re - print and it would work. I would say that this was maybe 1-5 jobs on.

  Earlier today, I printed a work without a problem, so I tried to print another short document. I get the message "error - printing". And now everything that I try to print creates this final result.  Things that which do not help.

  (1) restart my PC

  (2) print another document (a Wordpad doc with a single line)

  (3) print from another computer.

  (4) restart EVERYTHING (laptop, printer, router)-I also did a "hard restart" on the printer (unplugged) "

  5) re - defining the ethernet between my router and printer connectors

  (6) my PRINTERS folder is empty (thingey of print spooler)

  (7) the printer seems fine for purposes of printing information about the State of the control panel

  (8) I find the Guide of the curious user, especially in the context of things networking. I don't see even my configuration in the list, but I can't imagine it not supported (and it worked for a month). But I don't know enough to be able to understand what he said.

  I have zero problems with internet traffic, BTW. Modem connection cable.

  I did an IPCONFIG / renew, but this was not helpful.

  My network is on zero. I can't even say the output of the IPCONFIG/All command, whether or not my printer is known to be connected to my router.

  I don't know where I should look then (printer, router, computer laptop, combination, etc.). Suggestions?

  Thank you. ;

  Dave

  I continued to dig into the manual, found a term that I had misunderstood (causing me to jump to the relevant section of the manual) and found a step that had to be done. And it is to disable WI - FI (I am connected to my router).

  Of course I was not connected via WI - FI (stumbled upon some sort of problem with my firewall, so I just plugged the thing). And I have no idea why I went from "occasional failures" to "cannot print a single thing, darn" by doing nothing more than find and open a jpg file to print.

  But I'm going to mark this one resolved, as I don't seem to be able to print again.

  Dave

  Dave

• Wireless printer connects to the laptop, even though she has worked in the past.

  My printer HP Officejet 6700 Premium connects to my laptop HP Pavilion 15, although he has worked in the past. Other computers around the House connect to the printer and print documents without any problems. When I go to print from Microsoft Word, it says my printer as offline.

  I tried to remove the printer from my devices and printers list (so that I could try to reconnect the printer), but he is not leaving the list after clicking "remove hardware".

  Could someone help me please you troubleshooting? I really need to be able to resume printing my documents for the school.

  Thank you!

  Hi @OfTheFalls

  I'd love to help you reconnect your 6700 printer and computer.

  I suggest using the HP print and Scan doctor first of all, it can solve many printing and scanning errors, network or USB problems, driver problems and conflicts of port connection. Click here to download and run the print and Scan Doctor >www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks ( ), the tool did not find any problem.

• Can I update driver for c4585 for windows 7 to allow wireless printing?

  My photosmart c4585 does not work with windows 7, I can get the driver to work with windows 7?

  Here's the full features of Windows 7 software and the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74912-1&cc=us&DLC=en&LC=en&OS=4063&product=3757825&sw_lang=

  Install the software and the configuration of your PC to a wireless printer connection. 802 11 B and G wireless protocols are supported by your printer wireless.

• HOW DO U INSTALL A WIRELESS PRINTER

  How to install a wireless printer

  I guess that you haven't tried Googling it yet? :)

  Hope this helps:

  http://www.PCWorld.com/article/212204/how_to_install_a_wireless_printer.html

  http://www.WikiHow.com/set-up-a-wireless-printer-connection

  If necessary, go to the Web site of the manufacturer of the printer to download a manual for your printer or see the Quick Setup Guide as appropriate.

• iphone with printer connection

  Hi all

  I have a photosmart d110a wireless printer connected to an imac with lion and I'm unable to connect my iphone4.

  He searching devices and can't find anything. Would be grateful for the advice. Thank you

  The printer must be connected to a wireless network directly (and not via USB to your Mac).  Once this is done, you must enable Web Services from the front of the printer.

• HP Laserjet Pro P1102w printer: HP P1102w wireless printer will not pair with a SBG6782-AC Motorola Wireless Cable Modem Gateway

  I already had Internet AT & T U-verse using a Wireless Modem Arris IPDSL NVG510 gateway.  My laptop HP running Windows 8.1 and the HP LasrJet Pro P1102w wireless Prnter systematically and automatically connected to the wireless network NVG510 with no problems over the past two years and the wireless printer works without problem.

  I recently replaced the Internet AT & T U-verse connection a connection of Mbs Comcast Xfinity Intrnet 25, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP under Win 8.1 Pro laptop connects to the network and access to Internet without any problems what-so-ever.  However, the HP LaserJet Pro P1102w wireless printer connects to the wireless network and I can't print at all from my laptop.

  I tried all the suggestions P1102w Wireless Configuration of the printer on the HP printer Support Site, but nothing helped.  I've also updated the firmware of the printer and Loaded the latest driver Installation & full product software.  I tried and re-tried these suggestions over the past two days, but without success.

  I would be very appreciately all help experts in this Forum.  to get the printer working wirelessly, since we also wireless print to this printer of IPads and other wireless laptops.

  Hi @Atmasin,

  I see that you have trouble connecting the printer to the new router. I want to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  If the network name has spaces or special characters, the printer may not recognize it.

  The printer is able to send/receive in the 2.4 ghz band.

  If it is set to 5 GHZ network, you may need to change to 2.4 ghz. (rename the 5 ghz or turn it off)

  The WPA key setting must be on AES to work properly not TKIP.

  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the Configuration page.

  You may need to contact your router company to get help to check these settings.

  Try to run the Configuration Wizard wireless of the HP software to set up the printer on the network.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• my continuous wireless printer going offline - how can I 'stabilize' the connection '.

  my continuous wireless printer going offline - how can I 'stabilize' the connection?

  Hello gerrie,.

  What I would do is put off the printer and the router so

  -essentially them turning off for about 10-15 seconds

  -and then feed the router back on waiting for all the lights turn on completely

  - and after that is back in the market I would re - turn on the printer and re-establish the connection between the printer and wireless network

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!