Wireless range extension

Similar Questions

• WAP610N like Wireless Range Expander

  I have a WAP610N I would use as an extension of range on an existing wireless network.  I want to be able to move seamlessly around the House and the yard, using my router and WAP without getting disonnected.  The WAP610N can be configured to operate in this way?  Any special about parameters?

  THX!

  the basic parameters of the wireless router wireless must match the settings on the AP basic wireless.

• I am trying to add a N300 wireless range extender to my house.

  I am trying to add a range-extender N300 WiFi at my home.  I have a router from apple.  I am trying to connect with WPS. I am looking for a WPS button on the router from apple (according to instructions), but fails.  Is it possible to use this extension?

  The N300 has a web interface, you should be able to see the network transmitted the Apple it. Note that it may not work. Another unit of Apple would be simpler and better.

• card wireless Acer extensa 5420 to vista

  I upgrade my acer extensa 5420-5038 to windows vista. Everything is fine except the wireless card, I download the acer broadcom driver. When I install it, it doesn't show any card insertion. Any help?

  Thank you

  Download this driver solved the problem

  http://forums.DriverGuide.com/showthread.php?t=62606&page=2

  http://www.mijnbestand.nl/Bestand-ARE4IMYWHHS8.zip

• East - what to expect two WRE54G range extensions I have installed?

  I bought a WRE54G Range Extender for home use with a router WRT54G home. My laptop and iPhone had low signal strength in the room at the other end of the House of the router. I put everything in place, it seemed to work ok, so I bought another to do the same thing at work.

  Now that I've had a couple of weeks, trying to use the bar end of range with several iPhone and several laptops, including 3 hours on the phone with Linksys support (level 2) yesterday, I'm disappointed by my results. I have the same problem on two systems on both devices, configured to the Linksys and the routers wireless of Fortinet. Here's what I mean.

  If I start a laptop or an iPhone to range of the router, I join the network very well. So if I wear the device closer to the Range Extender, the signal becomes stronger after a minute or two, and my problem is solved. But then the device loses the signal from the network at the end of 3 to 10 minutes, she resumed, but now I do not get an IP address, so I can't do anything. The only way to get back on the network must carry the device to the router, reconnect, and then carry the rear of the unit until close to the Range Extender. Home Range Extender is now about 25 feet from the router. At the office, it is about 70 feet away.

  On one of my laptops at home, if the laptop is connected via wi - fi with the average signal strength, when I turn on the range extender, after a few seconds the laptop stands wi - fi altogether. Then it shows that it is connected but doesn't 0.0.0.0 for the IP 169.x.x.x. usually the only way to get this laptop at work is to turn off the Range Extender.

  On my iPhone, I have a wireless diagnostic application. From there, I can see all the wi - fi signals, a couple of weak force those neighbors. I have my network on a channel not used. The router and the range extender are defined with the same string, security settings. They both come with the same name.

  I would be able to connect to the Range Extender instead of having to connect to the router first, and then switch to the Range Extender? Is it normal to keep losing signal every 3-10 minutes? I've never had any of this wrong with the router, only with the Range Extender.

  Maybe that I need another device and the Range Extender is not supposed to do what I'm trying to do. Someone at - he had experiences or ideas to share?

  As a last step, I have updated the drivers for the card wireless on my laptop. Now everything works fine.

• Installed New Netgear Wireless Range extender but new network doesn't have internet access.

  I just installed a machine net universal range extender for WiFi and the signal over the Wan is very strong, but when I connect to him he says that have no internet access. What should I change? I post what I'm on the Ext network.but when I try to access other sites, it won't let me.

  I had the same problem as you and searched everywhere for a positive response and have not had a. I was about to return the netgear Extender when I, fortunately, has found a way around this strange problem.
  In fact, it's really simple, and I encourage really all those who eventually get this problem complain to netgear not having their detailed in the guide installation process that they shipped with the product.

  In my case, I have a WEP encrypted network.

  If you can't access the web interface of the Extender, you need to reset the device by inserting a paper clip in the small hole next to the WPS button (if you don't know already).

  When you are prompted for the encryption key and password for the network existing (the original one), you MUST WRITE THE PAST ON THE INPUT FIELD KEY word select and not the field the password. You can choose one of the 4 input key fields, but you MUST write the password on one of them and leave the field blank password (I think it's just for the WEP encryption, which is my case).

  I also changed the encryption type for the new network "_EXT" from WEP to WPA/TKIP but kept the same password.

  After the connection is complete the Extender successfully verified updates and all the IP addresses are assigned automatically via DHCP.

  I hope that I answered in the time before returning the Extender because I don't have a kind of complained after doing this.

  Good luck
  Marlon.

• Mini is short on the wireless range

  I'm pretty happy with my Mini 1025, he does everything very well.  However, I'm not very far from the router.  At home, we have an ATT U-Verse gateway, and while my other laptop can make on the floor and the other side of the House, the Mini it is just in the next room.  At the office, I have about 30 feet from the point of transmission above the ceiling fell.  My other laptop shows the power of 100% signal in my office, but the Mini shows, at best, 2 bars.

  I think to buy an external WiFi adapter i.e.USB rather than use an intern of the Mini.

  Does anyone else have this problem?  Known cures?  Any advice on external USB adapters?

  I'll appreciate your help, thank you.

  I fixed it myself today.  If I stay, I had ZERO connectivity.  I bought a RangePlus Wireless USB Adapter from Linksys at Staples for $79, and I now have a signal strength of 71%.  Installation was a snap.  The two systems are active.  HP tries first, find nothing, then Linksys gets to work and connected me.

  I didn't spend the money; but I need the connectivity here.  HP too bad built with these receptors of WD.  (Cruelly deficient military speech)

  Marty

• Cannot display networks wireless range... impossible to start the Automatic Configuration service

  My wireless card says it works correctly, but when I try to choose a network I get "Windows cannot configure this wireless connection" and I'm not smart enough to understand how to start the automatic configuration service.

  Hello

  If there is no 3rd party utility running (as mentioned by Steve), or you disabled loan and lost WZC.

  Maybe this can help, http://www.ezlan.net/wzc.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• WEP KEY: Net gear wireless range extender model ex6150

  My WEP key is 26 characters. When entering my WEP key, I'm alerted that no more than 10 characters are allowed. What should I do?

  Thank you. Technical support Netgear has accompanied me throughout the process last night. The extender works well!

• HP Envy 15: wireless connection

  What is the best driver for HP Envy 15 q5tx 8.1 window 64 bit, I have Realtek, my wifi connection is not good.

  Realtek version 8.024.1218.2013

  Date of 18.12.2013 drive

  But my HP I get the HP company this year.

  1.  Network adapter-

  Device Bluetooth (personal area network)

  (Protocol RFCOMM TDL) Bluetooth device

  Intel (R) Dual Band Wireless-AC3160

  Realtek PCLe GBE create controller

  2 / all are updated regularly.

  3.  My HP Support Assistant connection-

  My devices-

  Wired LAN 1 - not connected

  1 - no connected wireless LAN

  Bluetooth connected 1 - no

  What is c?

  That's what I have, why my Wifi doesn't connect at all times? What else do I need?

  Now - 1 sec I'm now and then dry - I'm not connected and suite, and - throughout the day

  Help me please.

  Elil

  Hello:

  I mean by this is... I think that your laptop has only a single antenna, and that is why the reception is so low.

  For some reason, HP wants to include only 1 antenna wireless in notebooks with this model Realtek wireless card.

  All wireless cards have two terminals to connect antennas to-including yours.  A main terminal as well as an auxiliary terminal.

  The second wire connects to the auxiliary Terminal to improve wireless range and a reception.

  So basically your card is only half the reception should be with a single antenna.

• Tecra M2 and wireless network - signal strength problem

  Need advice buying wireless kit.

  I have a DSL phone line connection and I am currently using a Speedtouch USB modem connected to my workstation down.

  I have a laptop Toshiba Tecra M2 with construction of wireless support. I want to be able to share the internet connection which comes in the workstation down. I guess that my options for the workstation are to use a DSL wireless modem to share the internet connection or to use a PCI card in my computer. I tried them both.

  I first tried to set up an infra mode network with the laptop using a LinksysWAG54G which was connected to the telephone line and a computer. But the problem with that I was t couldn't do accept the subnet mask that my ISP (Lixxus) provided 255.255.255.255 (PPoA). This modem has all the masks of SN in a dropdown list, but mine isn't in this list. I returned this modem.

  I tried then set up an adhoc network purchase buy a PCI Wireless card for my desktop, and internet connection sharing etc. on the workstation. However, while it worked, and I could see the desktop of my laptop, the problem has been the wireless range. The signal disappear when I wore the laptop in the back room on the first floor. It would have been a distance of 10 meters in a straight line between the laptop and desktop. There are walls two bricks and a floor between the two machines. It seemed hopeless, so I sent the PCI card.

  I'm not sure what to try next.

  Any suggestions that I could try next?

  Suggested hardware?

  Signal strength - could the problem be that the antenna in portable insufficient Tosh - it too small?

  Hello

  I have the same situation at home. The best solution for this is to use the wireless router. Here you have the possibility to connect several computers desktop or laptop. In this case the configuration of wireless connection is very easy and it works fine. I also use it at home and in front of my house with no problems.

• Extension of WiFi at R7000

  HI -.

  I recently installed a R7000 Nighthawk, but he needs a range extension to access certain parts of the House. The R7000 is rated AC1900. I think buying the EX6150 range extender, which is rated at AC1200. Is it still compatible with the R7000, but at a slower speed? I put off buying an AC1900 Extender because the price is 2 - 3 times an AC1200 unit.

  Thanks a lot for any advice.

  Peter

  Should work, and as you said, more slow - but 50 percent slower, due to the Extender of nature, they are penalized at about 50% loss of flow. I would suggest buying a router that can operate in Access Point, with connection mode direct etehrnet, back to your router, or seek to connect the router and the AP with powerline ethernet products.

• Wireless on my guard down computer

  My wireless on my computer continues to drop, it shows that its still connected but cannot open google. I disconnect then and reconnet and it works for awhile but then it drops again. Can you please indicate

  [Moved from comments]

  Hi maquart,.

  For you help I would be grateful if you could answer the following questions:

  (1) what operating system is installed on the computer?

  (2) you get an error message / code?

  (3) what is the brand and model of the computer?

  Follow the troubleshooting methods and check if it helps.

  Method 1:

  This article that you can identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2: Refer to the link below and check;

  10 tips to help improve your wireless network

  If the Windows operating system never tells you a weak WiFi signal, this probably means that your connection is not as fast or as reliable as it could be. Worse, you may lose your connection completely in some parts of your home. If you want to boost the signal of your wireless network (WLAN), try some of these tips to extend your wireless range and improve your wireless network and performance speed.

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=pbFpBDrZ-Hu

  Method 3:

  Temporarily disable the antivirus/firewall software and run the applications.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• EA6500 & Range Extenders

  I have an EA6500 that works very well for me. But our new House is a bit bigger.

  Wanted to know if the RE6500HG is compatible with my EA6500 as a range extender?

  Thank you

  Hi, testedone. Linksys AC1200 antennas boost Wireless Range Extender, RE6700 are not High Gain. You can check this link for more information.

• Cannot access the Web Configuration of RE1000 page once I have connected to my wireless network

  I can't access the Setup page of my wireless range Extenders RE1000 via IP 192.168.1.1 address once I have connected the Extender to my wireless network.  I was connected to the router via my mac and even took my mac out of wireless networks (just to be sure he wasn't trying to get to the IP 192.168.1.1 wireless.

  It happened a few times.  After it happened the first time I reset the access point and was able to get back to the web administration page.  I updated the firmware and exactly the same problem repeated once I plugged in my network home.

  This is a security feature? (Perhaps once it's on the wifi network you don't want just anybody access admin functions...?) A bug?  Or something else?

  Thank you

  If you don't set a static on the RE when IP address configure it on the connection of the SSID, it will grab an IP address from the router. You need to look in the router DHCP client table to find the RE of the new IP address. You can also use a reservation DHCP from the router to assign an IP address to the STIMULUS, but static IP is the best.