Wireless with AT300 issues

Similar Questions

• iPhone 6s doesn't sync wirelessly with iTunes

  I have a new iPhone running OS 9.2.1 6s.

  Is set upward wireless at the Apple store, restored from my previous iPhone 5 and me kept updated iOS and phone saved wireless, and had not annexed it with iTunes on my Mac, until today.

  I have the gasket with the USB cable into my iMac running the last El Capitan, iTunes 12.3.2

  The iPhone has shown in the section "My devices" in iTunes, but I immediately got a message "there is a new version of iOS for the iPhone (9.2.1). iTunes started download iOS 9.2.1 but I stopped, because the phone has already 9.2.1.

  I checked the preferences to allow the iPhone to sync wirelessly with iTunes, applied and then ejected from the iPhone.

  My iPhone is connected to wifi, but when I restarted iTunes it does not connect wireless - the wireless only showing in iTunes is my iPad.

  My questions are so

  (1) why only iTunes can only see my iPhone 6 is already running the latest version of the iOS software

  and

  (2) why didn't it connects wireless when I set the preference to do?

  Thought I'd ask advice here before that I contacted Apple support.

  Thank you

  Caroline

  There is a different verson of 9.2.1 released by Apple to fix the error 'January 1, 1970.  It is only available through iTunes, not live.

• Satellite M100 with chipset issues

  I bought myself a M100 a month ago and have been happy with it to the point that I decided to extend its capabilities by purchasing a network card wireless with the (so-called) greater range and speed.

  My problem is with the windows way initialization handles - it gives me an error Code 10, which is apparently average Microsofts to say no, we cannot give you any more resources to do this.

  In addition, I also read that this may be the result of the Intel Centrino chipset. Toshiba wireless (intel) is based on a chipset Atheros, and is so the new device i've got... This is in itself a potential conflict.

  My question is - how do I free up resources (or disable the internal Wi - Fi connection) so I can use this new feature? (if it is infact the problem)

  Microsoft say they have a "fix" specially for this problem, but you will have to send (IE pay them) to get it. I think that this is unacceptable.

  I use:
  Satellite M100
  D Link DWL-G650M (108 G MIMO Wireless adapter) (PCMCIA)

  any input in solving this would be GREATLY appreciated!

  Hello

  M100 is unknown to me, but it should be similar with Satellite A100. You're right about the WiFi card. Initially, the set comes with the Atheros WiFi card supporting the network 802.11ag. This means that you can use the network wireless with 54 MBit per second. As far as I know, this is the latest standard used on the various laptop models.

  What WiFi card that you want to use (speed, internal or external)?

• Can not put on wireless with FN + F8 on my Satellite L750D - 19 c

  Hello

  I can't put on wireless with FN + F8 on my Satellite L750D - 19 c with windows 7. It stopped work at shot, and I cant get it up and running again. I tried to install the latest drivers and the disabled option 'save energy '.

  / Magnus

  Hello

  I have the same problem with my satellite L670.

  The FN keys do not work and I am not able to use my Internet connection. : () o

  I used to get these buttons to apear on the top of my screen to get the mouse towards the edge.

  So I could turn the wireless on / off power with the mouse.

  But these "maps" doesn't apear. Or my settings on the camera to the left of the screen.

  Thank you very much.

  Post edited by: PearlSabian

• HP all-in-one wireless with 10 5525 windows insider

  Hello world

  I work with the 5525 printer about 3 years.

  also with wifi wireless, andalso with windows 10.

  all of this until last May.

  in may, I was to format and install windows 10 insider and fromthis point, thast all I tried to solve the problem, it's not helping me. and the problem is:

  that, since may, I can't work with this printer, wireless, with wifi.

  I can to work very well with a usb cable, but not with the wireless.

  Windows don't simply do not see and not detected my impression when I try to work wireless.

  is not see the printer. not even in offline mode.

  in the list of wifi, I can see the HP-printing-da-Office-5525, but in the unit and the printer - no.

  I also tried to install all the latest drivers from hp and for windows 10 - without resluts.

  also, I tried to install the latest windows build - 14390, but this does not help me.

  I think its something with the drivers.

  can someone help me?

  Thank you very much!

  Well, first thing to do is to disable wireless live, because you don't need and it's confusing questions. To disable this feature:

  1. On the printer, click on the wireless icon that looks like a radio tower.
  2. Click settings.
  3. Click on wireless Direct.
  4. Click turn OFF.

  Now, to connect the printer to your wireless network:

  1. From the main screen, click on the wireless icon.
  2. Click settings.
  3. Click Wireless Setup Wizard.

  Please let me know the results after following the above. If you are able to connect to the wireless printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  Try this below and see if it help you.

  http://support.Microsoft.com/kb/871122

• Print Spooler service is not running (could not install printer) hp photosmart wireless with

  Print Spooler service is not running (unable to install printer) hp photosmart with wirelessprint spooler service does not not (impossible to install printer) hp photosmart wireless with

  Hello

  · What is the model number of the computer?

  Try not the link below and check if it helps: you encounter printing problems, display the printer icons and adding printers, the print spooler service does not work correctly and you receive error messages related to printing on a Windows XP computer: http://support.microsoft.com/kb/919750

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close": http://support.microsoft.com/kb/810894

• How can I configure my printer HP Deskjet f4400 to print wirelessly with my Mac osx?

  I am able to print entirely specific wireless with this printer or do I connect to the computer via the usb cord or router when I want to print?

  Thanks Jabzi!

• Cannot access wireless with linksys WRT54GS router

  Hello

  I just installed a Linksys WRT54GS router on my connection, the problem I have is to be able to access with my wireless on my laptop.

  I kept getting a message saying 'connection unindentified' 'access '. I did most of what is already on your forum that such a power out of my rooter, my modem and such and still nothing. I am able to access wireless with my girlfriend Mac laptop, my playstation 3 and my desktop computer which uses Windows X. I initially thought that it my be a problem with my security but even when the connection is unprotected I still have this error. I am trying to disable the IpV6but that didn't ' dot something or the other.

  My laptop is a Toshiba Qosmio X 300 PQX32C-033019 with Vista and my router is a Linksys WRT54GS to. 6

  Here is my connection connect you, sorry if this is in French:

  Try this-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  On your Vista laptop, first turn off the wireless network connection and restart the laptop, and then enable the wireless connection...

  Then click Start > Control Panel > Network and Sharing Center > manage wireless network and click Add, select manually create a network profile and click Next, enter the name of your network SSID/network, select WEP for security type and enter your 10-digit network key and click Next, it should say 'Connected successfully to _' close all windows , and then restart the laptop, now see if you can connect to the Internet wireless...

• Cannot associate my Xperia Z3 wireless with my Win7 32-bit computer

  Hello and thanks for reading,

  PC 32-bit Win7

  Sony Xperia Z3 (in Media Transfer Mode)

  I follow the installed "to you ready to use your device wirelessly with a computer" but do not get the necessary popup and therefore cannot click on "configure device for network access" to allow me to pair my PC with my Xperia Z3 phone so that I can use my phone with my PC wireless.

  The Z3 Xperia phone and PC Win7 have more recent software updates installed.

  I would appreciate help with this device matching business. It's all new to me and Google search has developed with nothing!

  Thank you

  johndoc

  There is an easier way - connect your phone via USB and open Computer - when the device indicates that connected then click here right and on the left, click on the network configuration and follow the steps - much easier than via Pc Companion

• With the help of HP 6500 wireless with Verizon MIFI 2200

  Is - it possible to use my HP 6500 all in one with built in the wireless with a Verizon MIFI 2200 at the same time... everything on my laptop wireless connection?       Thank you

  Well, I took a chance that it might work... what I did was set up the MIFI, then once wireless put printer software cd in the computer laptop and is gone to the network connections on main menu tab after a few steps he allowed me to enter the wep key and magically it was printing, wireless and the Internet at the same time. At least it is at the moment.

• Get a work wireless with the other computer

  I can't get my wireless to work, said the connection card wireless network is disabled & local connection adapter is disabled...

  I have a desktop computer & bought a wireless router for it! But can't make it work...

  Hello

  If desktop equipped with a wireless adapter to start first with her.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  ----------------------------------

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  -------------------------------------

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  -----------------

  When it works, you need to do something similar wit the wireless.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

  We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.