With OfficeJet Pro 8500 Mac user

Similar Questions

• Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? Windows 7.

  Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? I am running Windows 7.

  Hello

  The 8500 (A910) driver is not support printing posters.

  To work around the problem, you can use another pilot who provide the required functionality:

  1. Enter the control panel > devices and printers, click Add Printer .
  2. Click on Add a local printer.
  3. In use the existing Port, select the port for your printer:
     DOT4 if your printer is connected by USB
     If standard TCP/IP network connection used.
     And then click Next.
  4. Click Windows Update in the list of printers, allow several minutes for what the list will apear again.
  5. Select HP in the column of manufacturing
  6. Select the printers HP Deskjet 6980 series column.
  7. All the steps in the wizard.

  Now, you will be able to use the print feature post using the driver 6980, by setting the option Pages per sheet and poster in the finishing tab.

• hp officejet pro 8500 Mac has 910

  I've recently updated to Mavericks OSX 10.9 and now my iMac can't find our HP 8500 a (910 a) and installing the driver did not work.  It is not even appear on the list of available printers?  Any suggestions for Mac users?

  No problem MacMimi,

  Let's unplug the USB cable from the printer, leave the printer on and unplug the power cable, and then stop the Mac. After a minute and reconnect the power cable printer to turn back on the computer.

  Once the computer is back on, return to printing and scanning from the preferences system and then connect the USB cable to the printer. If the printer doesn't appear, there will be a few causes. It could be the USB cable, the port of the computer or, possibly, the port of the printer. Try another port on the Mac, if the printer still doesn't appear, try a different USB cable. If the problem persists, I can't believe that the USB port on the printer has gone wrong.

  Keep me posted.

• Digital fax with Officejet Pro 8500 wireless

  I'm on Mac OS X 10.6.1 with the latest version of the drivers from HP, but I can't seem to understand how to enable digital fax. The device itself says that it must be configured on the computer.

  I am hesitant to install the software from the CD the HP drivers for Snow Leopard is supposed to be most recent.

  Any advice would be appreciated, thanks.

  Faxing from the Mac is not yet fully enabled on some printers in Snow Leopard.  I'm not sure of the 8500.

  Try the latest drivers for HP on the site of Apple here.  If this does not work, wait for 10.6.2 - it comes out very soon.

• Win 10 analysis of problem with Officejet Pro 8500 A909g wireless printers

  I have the same problem, scanning works very well since long I do not use the HP Solution Center, it worked fine on W7, but after the upgrade of the W10 (YES I installed the new feature full support for W10)-Scanner is still not functional with the HP solution Center. I tried all solutions with no joy. HP scanner doctor says that it cannot find HP Scan, Solution Center, said another program uses the sanner. ?? Frustrated!

  Hello

  1. This same CCC folder, run Uninstall_L4.bat) press enter once if only black dialogue is shown) and allow to fill any screen uninsitall (there will be multiple screens to uninstall one after the other.
  2. Restart the PC when requested to do so.
  3. Right click the button start and select programs and features, there is no request of HP left.
  4. Locate the following folders, and remove all remaining files HP or Hewlett-Packard :
     
     • C:\Program Files
     • C:\Program Files\Common Files
     • C:\Program Files (x 86)
     • C:\Program Files (x 86) \Common Files
     • C:\Users\(your user name) \AppData\Roaming
     • C:\Users\(your user name) \AppData\Local
     • C:\ProgramData
  5. Navigate to C:\Windows and delete the pritner folder, it should be identical to hpoj8500A909g
  6. Always in C:\Windows, find the twain_32 folder and rename it to twain_32.OLD
  7. Right click the button start and click on run, type temp in the shown dialog box and press OK, then delete all the contents of the Temp folder (no worries, these are all temporary files that can be saefly removed)
  8. Right click the button start and click on run, type folder in the shown dialog box and press OK, then delete all the contents of the Temp folder (no worries, these are all temporary files that can be saefly deleted).
  9. Save the insatller depending on the Office you'd, do not reinstall it again that I just send you additional last private preliminary step to reinstall the HP software:
     http://ftp.HP.com/pub/softlib/software13/COL31041/MP-110033-3/OJ_AIO_P8500_A909_Full_Win_WW_140_408-5.exe
  10. Look for a message private to me, if you are unfamilier with works of how private e-mail, you will see a notification message in the top right envelope icon from the page to the screen of the forum.

  Kind regards

  Shlomi

• Officejet Pro 8500 required user intervention has Premium Windows 7 64 bit

  I changed the cartridge according to market and started getting this error message?

  Hello

  I don't think so. I saw spare pens work on HP printers. The only thing I could think off, is that the cartridges that you and the printer are not communicating properly. It could be the chip on the cartridges, so I was wondering if you could either get a new set of replacement cartridges or try the current to another compatible printer just to see if you get the same problem.

• Color photo not realistic with Officejet Pro 8500 has Premium

  My new HP printer is a real disappiontment when printing photos. Heaven prints too dark blue, without worrying how light I adjust the color. When I have prints made on the CVS Pharmacy photo printers, they look exactly the same color as the sky, when I took them. Is it possible to adapt? It is not any option of color tint, that I can find. You do not need a photo printer!  The seller said that this model print photos in true color, like their photo printers; a little less than pixels. More pixels do no good, if it prints wrong color! Help anyone? I use the HP photo paper and ink.

  You can use adobe photoshop to adjust the hue... or other third-party software 3.

• OfficeJet Pro 8500 a: 8500 a plug the USB to the PC and wireless for Mac

  Our Officejet Pro 8500 a is connected via USB to our HP Pavilion running Windows 7. This connection works well. However, I tried to connect my iMac (OS 10.10.2) to the wireless printer with no success. If I disconnect the USB from the PC, I can connect wirelessly from my Mac. My question is: the Officejet Pro 8500 a does support multiple types of connections - one by USB and the other by wireless? If so, then I would appreciate help to understand why my Mac is not the 8500.

  Other details: our wireless router is Apple Airport Extreme. The wireless connection on the printer seems to work (I can print the details of this connection). However, when I try to add the 8500 to the Mac by using add printer, the printer does not appear. (The printer is lit and shows five bars of signal strength, SSID is correct and a valid IP address).

  My Mac is connected to the wireless network.

  Any suggestions?

  I was able to solve the problem of the printer with ethernet connection to the router that provides network wireless for PC and Mac. Now two machines are able to access the printer with no problems. By connecting with an ethernet cable, connect the printer wireless has been disabled. It had to be done because the wireless radio had become unreliable. The idea was that the blue wireless light never came. Thus by connecting wired LAN, all problems are gone. Thanks to the team of Geed for help.

• OfficeJet Pro 8500 909 a will not be re - install Mac 10.7.5

  I am very frustrated with this issue, I'll have. Here are the bullets:

  • Running Mac 10.7.5 (Lion).  Printer is connected to this computer through the USB port.
  • Has started to receive messages on my all-in-one HP OfficeJet Pro 8500 909 a scanning would work not and check the documentation for the aid.
  • While looking online and through some troubleshooting, I deleted my print printer to attempt to reinstall fees.

  The main problem I encounter is that I can't seem to re - install this printer no matter what I try.  Here's what I tried...

  • Tried to launch the HP (ver 2.3.15) CONFIGURATION UTILITY and DEVICE MANAGER HP (1.5.8) that was installed on this machine for the printer.  When going through the Setup utility, my device is not seen, so it is considered for a screen and then I invited me with a message that says that my device is not supported by the installer and I had to go to hp.com/support for more help.
  • When I go through SYS PREF > PRINT & FAX and try to click on the '+' to add a PRINTER, the printer never shows in the choice of 'default' as being same / connected.
  • When I go to find help on the support site, the indications only can I find tell me I should use for the Lion, update the Apple software to download the latest update (which I'm sure has already downloaded on this machine in the past).  Tried to restart my Mac, reboot and disconnect all the wires between the printer and Mac, to see if it would work the update of software this printer is connected.
  • I scoured the HP website to try to find the "utility installation hp for lion" install file, but it doesn't seem to be available as a manual download - each direction pointing right back on software updater.

  It is where I am at-I feel like I'm stuck in this small black hole where I can't use the HP Installer on this machine b/c it is too old and I can't download something 'new' of Apple Software Updater.  I did go to the Apple website and download the drivers for Mac OS x Mountain Lion & Lion. I have installed for this machine, restart and still nothing that shows this as a connected USB printer.

  Help, please.

  Chad

  Hi chadkafka,

  Follow the steps below

  1. check that your USB cable is good using a new

  2 open the system preferences and then right-click in the white area open. Select the Reset printing system

  Note: If you have installed other printers this will remove all printers in the print queue.

  3. open utility disk, then on your hard drive. Click on repair disk permissions

  4. connect the USB cable to a Mac and then select now, when it asks you to install the printer

  5. click on the apple icon Mac in the upper left corner and then run software update to reinstall the printer using the ASU.

  Let me know if you get the printer installed successfully?

• HP Officejet Pro 8500 has Plus: HP Officejet Pro 8500 a cannot scan more on the purchase of Mac

  I have not had any problems using the printer or scanner on the HP Officejet Pro 8500 has more when I had my old laptop to Windows 7. There was some HP software installed from a CD that allowed me to open the HP application and adjust the settings for scans, save multiple scans in a single PDF etc...

  Since switching to a new Mac OSX desktop computer, I can't install it whatever that either the old CD from my Mac has no CD/DVD drive. The only application of HP on my Mac is now HP ePrint, and which does not seem to offer something to scan with.

  The other option that have left me is to connect the Mac to the printer by USB, then choose:

  Scan > computer > iMac > save in Jpeg.

  But I get the following error message:

  "Connection error".

  The connection to the computer is down or HP scanning application cannot detect the OCR software. Check the computer for more details".

  What do I need to install, or the difficulty to get the scanner to work on my Mac please?

  Hi Karlos444,

  Unplug the printer and reset the printing system:

• HP officejet pro 8500 a909g driver for mac 10.10.3

  Hello

  I am not able to scan/print through HP officejet pro 8500 a909g 10.10.3 Mac.

  I think because of no proper drivers, scanning/printing does not work.

  What should do?

  Hi @pan1490,

  Welcome to the HP Forums!

  I understand that you cannot print or scan with your HP Officejet Pro 8500 a909g on Mac OS X 10.10.3 Yosemite to. And I'm happy to see it for you!

  To verify that your printer hardware is functional, you are able to make copies of the scanner glass? Copy of a multi-page Original.

  If you are able to copy, then I recommend to install this driver, HP v3.1 for OS X printer drivers, which is the only driver I know for this printer on Mac OS X 10.10.3 available. Please see this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005. How to scan without HP on Mac software.

  Hope this solves your problem and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Mac does not print Officejet Pro 8500

  I have an Officejet Pro 8500 Wireless.  Last week I set up with a Belkin wireless router.  I work on both OS - a Windows WP and Mac Lion.  The XP is print wirelessly, without a break.  I got the Mac to recognize the printer, and Mac utility will print the wireless test pages.  However, when I send regular (of any type) documents to the printer, they never proceed with printing.  The window of State says they are printing, but nothing ever happens.

  I have already invested 20 hours in this and I hope that someone here might be able to help me solve this problem.

  Thank you

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Download and install this: http://support.apple.com/kb/DL907

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP officejet Pro 8500 a: HP officejet Pro 8500 has driver software for Mac OS v 10.10.2

  Dear Sir

  could you please provide me with the HP officejet Pro 8500 (A910a) a software driver for MacBook pro (OS X Yosemite v10.10.2) everything in is not available on the site.

  Kind regards

  Hello Sabrina,

  Welcome to the HP Forums.

  I see that you need the software and drivers for your printer on the Mac 10.10 operating system.

  The reason why you are not able to locate is simple because they are not available at this time.

  I have a suggestion that you can try.  Please click on the following link for HP v3.0 for OS X printer drivers.

  This driver will give you the possibility to print from your Mac.  You can use the scan to Apple for any analysis software that is already on the Mac.

  I hope this information is useful and if you have any other questions, do not hesitate to ask.

  See you soon,.

• HP Officejet Pro 8500 a on Mac full install

  I have the HP OfficeJet Pro 8500 has more software installed on my HP Pavilion DV7 (wireless connection).  It works very well on all the features, including the scan and e-Print.

  I recently bought a MacBook Pro with OS X 10.9.2 Maverick.  If found the HP printer without my nothing to do and I can print from it without any problem.

  I want to install the update of the driver to make it me scan to it for the Mac.  However when I look on the net, everything seems to be able to find is the update for the e-print, I have already installed.

  Can anyone help?

  Hi there obxperson99,

  I read your discussions and messages on your concern with the digitization of the Mavericks.

  Even if you have been informed that no full functionality driver and the software is available for your 8500 has more and 10.9, there may be a work around options for you can scan. See the link below for details.

  How to perform a scan: OS X v10.9 - click on "Scan without HP software" and you will see 3 methods to choose from.

  I hope this helps!

• OfficeJet Pro 8500 a - problem with the wireless radio

  First of all, I'm sorry for my bad English. I hope that you have little imagination when reading. I'll start to describe the problem and the lower list, I hope, all the relevant information you need to help me.

  Yesterday, I bought a brand new OfficeJet Pro 8500 has.

  Since I have found a little bit of my computer and my router I configure for wireless connection.

  All whent fine, the printer connected to my WIFI network without any problem and I was able to do a scan using the HP scanning software. How ever, when you try to scan a document nother directly after the first that did not work. I got an error message on the computer telling me that the computer could not connect to the scanner and it could be caused by the firewall. I also tried to print a word document, but it seemed that the document could not be sent to the printer during the observation of the State of the printer. Finally I gave up the print job and began to study the problem.

  By using the service to help in the HP software that I did all the things he suggested me to do. I have disabled the firewall, open TCP/UDP ports, restarted the router, the computer and the printer in different combinations, nothing worked.

  All the while the printer was connected to my WLAN, indicated by the State of the network printer and the router. I was about to give up but thought I should try only to disable and enable the transceiver wireless in the printer. To my surprise this solves the problem. I was in a position of scan and print documents.

  Today, after work, I tried to do another analysis, and the same mistake was present. Once more I did magic with the wireless radio and it has temporarily solved the problem, but he came back a few minutes later.

  Summoriz, the error can always be corrected by disable and enable the radio wireless, but after some time (a few minutes) the error returns that it self.

  I played a bit and discovered that it is possible to access the built-in Web server during the error. Not all functionality of the EWS seems to work perhaps (it's OK) but I can't among many things has see the State of the network and I can even do an analysis using the integrated Web server.

  I tried to reconfigure the printer using the printer setup wireless and also after a reset of the printer and it does not help.

  I hope someone on this forum knows a solution to my problem.

  Useful information:

  Computer OS: Windows 7

  Router: Thomson TG784 (I have an internet connection, phone and TV provider and this box takes care of this)

  Encryption: WPA - PSK

  WLAN: 802. 11 b / g

  No filtering MAC or SSID hidden

  Other devices on the network are two mobile phones and a Motorola Xoom Tablet

  Printers, IP address: 192.168.1.81

  Firewall: WIndows (the router is disabled)

  Concerning

  Thord

  Problem solved. Reinstalled the PC s/w has little time and finally he solved the problem.