WRT320N

Similar Questions

• HND and WRT400N or WRT320N

  I was on two techniques different conversations and am still unable to download the product HND. The last of them had me download the latest LELA who was supposed to have HND in there. I installed it and there is a download link for Trend Micro. However, it is only Internet Security, a product I already own and use.

  However, I followed the instructions to remove my current version (an obligation) and installed. There was no Home Network Defender.

  I did this using the WRT400N router installed.

  I've had first bought a WRT320N but said on the chat tech that this model had no HND, although he is listed as one of the models of qualifications. SO I brought and bought the WRT400N. It doesn't work any more.

  Can someone please tell me what routers can be used with HND and where can I download the thing?

  I am really frustrated.

  The WRT400N can't HND.

  The WRT320N does support HND, but you will need to have the latest firmware.  This can be downloaded from our support Web site.  Afterwards, you should be able to use Network Magic to enable HND.

  HND is supported in the following routers: WRT160N, WRT120N (coming soon), WRT310N WRT320N and WRT610N.  The key is to make sure that you are using the latest firmware.

• WRT320N used as switch gigabit single - Question

  Hello friends,

  I use WRT320N a few days now and I'm happy with it so far! It has not overheated as many people reported and performance is also great (wifi and gigabit ports). I tested all the functions (NAT, Advanced Wireless Settings, Port Forwarding,... Access Restrictions) - all the great work, but I'm bit stuck on that easier - temporarily configure it as regular gigabit switch with an IP address: I put my cable WAN and LAN cables in ethernet ports 1-4. NAT, DHCP and firewalls are disabled in the router. I have the DHCP server in my network which is based on the MAC address IP address assignment. In "Setup" > "Basic settings" > "Router IP," I want to set up automatic configuration - DHCP, but it is not possible, so I just type the same IP address, it must obtain from the DHCP server (in this case 10.109.249.42). All ethernet ports 1-4 has the same MAC address (in this case, 00:25:9 C: 4 d: 16:86)?

  Everything works fine, my computer's IP addresses are correctly assigned (as well as wifi devices) from the DHCP server on my network, but I feel like WRT320N address is unaffected - the problem is that I can't connect to the router under http://10.109.249.42 administration. There is no IP restrictions for remote management. Any ideas?

  Screenshot of my "status" > "Local network".

  

  Routers Linksys WRT are not designed to be used as a simple access point/ethernet switch. That's why you won't find any configuration options you like for this configuration. You must configure a static IP address to the address LAN IP on the WRT. There's no other way. It's always a static IP address. The WRT will never get the address LAN IP of the server because it is designed to serve as a internet gateway and the DHCP server.

  It is clear to me why you are not able to access http://10.109.249.42/ while you are able to access the status page...

  Is the computer from which you are trying to access the router within the 10.109.249. *?

• WRT320N laptop computer connection issues

  Hi all

  I decided to upgrade my router today to WRT320N. I connect 2 computers wired, wireless 3 computers and a printer of HP Network on a home network. I was able to get the wired machines and the printer goes very well with Windows Vista and the Linksys software. I could not connect wireless laptops. I used the Network Magic program, the Vista network program and the HP Wireless asst without success. I tried using auto detect it on the router, to connect directly from the computer to a wireless network and using the magic network programs, including manual connect and the parameters on a loading USB device and try this on the computer to connect. I'm at my wit's end! Ideas by steps out there on what to do? I rebooted the router and Comcast cable modem x 2 x 4 and all computers at least once. Thank you.

  Tom Brown

  Using Comcast surfboard Motorola Modem (phone, internet) Multi model SBV5220

  Network Magic 5.5.9195.0 - Pure0.LinksysRouterSetup Version

  Operating system is Windows Vista Home Premium w / SP1 32-bit

  Windows Firewall in use

  AVG 9.0 antivirus

  SuperAntiSpyware 4.29. 1004, core 4046 track 1986

  Router WRT320N, firmware 1.0.03 build 010, address Internet IP = 76.103.67.182

  I hope this helps.

  Hi, do you have Network Lock active?  If so, disable it, and then try to connect to your laptop.

• WRT320n disappear from network

  Hello, ives you a question.

  Week last ived had al ot of the problems with the router WRT160nV2 I changed the router Monday last with a new WRT320N. No problems and the downloadspeed of good wlan al start of 22 MB/s. It al works well until this morning I turned my laptop after 2 hours I put it and there is no connection. I look and the router gives no signal. All the lights are on and the wlan works. But when I want to look for connections it doesn't give my network.

  Now after 3 full reinstalled i ' VFD has an hour of wlan internet and connections disappeared again. The local network works with al downloadspeed of 35 mb/s which is the maximum speed of my internet connection.

  I don't know what to do now, but I'm getting very tired of this problem with the linksys router.

  I hope someone can help me.

  Thanks Rayman76.

  PS I'm Dutch so my English is not that good I apologize for that.

  I'm having exactly the same problem (and I'm also a Dutch citizen)!

  Is this temporary solution that must be repeated from time to time?

  I would like to know the origin of the problem, this overheating of the material? And it will be solved by a firmware update...

  Thanks in advance.

• Cannot access the WRT320N cascading to the IP 192.168.1.2

  I have two routers WRT320N running.  The first is 192.168.1.1 IP and DHCP turned on and connected to the cable modem.  The second WRT320N is IP 192.168.1.2, disabled DHCP, NAT disabled.  The second router is connected to the first by using one of the ports labeled 1thorugh 4; the WAN port on the second router is not used.  Both routers are configured for wireless with an appropriate warranty, etc.  I put Remore management 'on' and put at the disposal of all property intellectual.  Now, I realize that remote management can be provided for use of the internet (not my intended use) rather than on the same home network.

  Good new first: the works of all things.  Devices wired for both routers have internet access and can 'see' each other for sharing of files, etc.  In addition, devices wireless on both networks seem to work OK, and the first router [192.168.1.1] shows all devices as clients, no matter what router they are physically or wireless connected to.

  Now the bad news: although it has worked reliably for days, I now can't access the second router [192.168.1.2] from anywhere in the network (no matter what router, the computer is connected to).  Work of its customers and you can test it with success of any computer, but when I type http://192.168.1.2 on IE or Firefox from any computer, it times out.  No dialog box asking for the password; not nothing.  All times out.  I tried the cyclical power router, but that has no effect.  Once again, during the first days, it seemed to work.  I could type http://192.168.1.2 of any client in the network and access the Router 2 very well and see its settings, set its SSID, etc etc.  Still, the router seems to work as I would and my network performance is OK, even for clients on the second router wireless, but I can not only access the URL.

  I'm sure I can hit 'reset' and that it will probably heal, but it also means that I have to start from scratch on a long list of the customizations I made to its settings, including. SSID, security, IP address, NAT configuration, etc. etc. (I save a configuration after I put in place.)  Is the only option to reset and then re - load the saved configuration? )

  Any thoughts here?  It is always tempting to blame firmware, especially when it works OK for a while, and then it stopped working.  Of course, I could also do sometihng evil.  Any help appreciated.  Thank you.

  to: Helm

  Thank you very much.

  It turns out that I had to do the factory reset, and then I have download the old config file until I'm your answer

  so far, all is well... the device seems to move traffic as it should, and I can access it again by entering the URL http://192.168.1.2

  I'll see how long the 'fix' hard... I really think they have a bug in the firmware there somewhere

  If she out craps again, I will set up from scratch, as you suggest.

  Thanks a lot for your help

  I think I'm 'good' for now.

• WRT320N lose Internet connection

  I'm running a 6100G Westell DSL modem, that the modem is connected to a wireless router from Linksys WRT320N, on my laptop, I use a card WUSB600N dual-band wireless n OK know the problem I have is that when the wireless router is connected to the modem my internet keeps going out on my DSL modem. But if I have the Westell Modem connected without the internet router to fade in and out. The internet only fades when the router is connected. How can I fix this.

  Thanks for advance-Aaron

  So, you want to say is: when the router is connected between the Modem and computer, you can't go online or you are able to go online but you are facing intermittent internet connection on the problem fall?

  As your ISP is a DSL provider there are certain rules to configure your router with the Modem of the DSL provider.

  If your DSL Internet service provider follow this link

• WRT320N dhcp dynamic

  Hello

  I have a linksys WRT320N router. I want my computer to have an internal IP address fixed. Can my router assign an IP address to my computers MAC address? I've known that I can assign a fixed IP address in my settings TCP/IP (Windows Vista). But when I do it is not possible that my router will assign THAT IP address to another device (when my computer is off)?

  Another solution would be to set up a fixed IP on all my devices...

  Thank you

  Jan

  He solved. my router has a 'Réserve DHCP' option. This will do the trick.

  You can also use xxx.xxx.xxxx.50 to xxx.xxx.xxx.100 for dynamic IP address IP address, and then set the other devices to a fixed IP address. in this way it cannot be any conflict of IP

• Speed limit 90Mbit wrt320N?

  recently, my ISP upgraded to 120 MB... Wow

  When I connect directly to the modem (wired connection) I get my 120Mbit, but when I connect via my router wrt320N, also plugged, the speed is limited to 90Mbit.

  I updated firmware to 1.0.04)is, but no difference.

  I found it!

  He seemed to be the cable between the modem and the router.

  I replaced it, and now I have my 120 MBit!

• WRT320N - loss of internet connection after redirect port 80 and 443

  Hello

  I have a problem with my new WRT320N. When I activate the port forwarding on my local server (ports 80 and 443), after a while I completely lose internet connection on all my computers connected to the router (wifi and lan computers). The router itself can ping and trace any Internet site through diagnostics to Web administration. When I turn off and click on save changes button, my internet connection works immediately again. I have the latest firmware installed and I tried to reset the router several times and set it manually since the beginning.

  My previously detained WRP400 has been configured to redirect these exactly the same ports and everything worked perfectly. Could someone advise me where could be a mistake? Thank you.

  I solved it. There was a problem with the combination of the service 'DHCP Reservation"of the router and client DHCP of Ubuntu. I disabled "Booking DHCP" and set the IP settings manually in the Ubuntu computer and now it works perfectly

• WRT320N slows down the speed of connection - terms of support of Linksys problem

  My internet connection speed slows down to about half of it is normal speed (or worse) until I have restart my router WRT320N. I see on the net that MANY other people have the same problem and can't seem to find a solution to this problem.

  I have the latest version of the firmware installed and I have the upnp is off

  I was told recently by a representative of Linksys Chat to perform this procedure, and I was wondering if anyone has tried and there set the coupling apparently daily slowdown that set in a reboot of the router for another day or two

  Here is the procedure that I was instructed to do...
  I was told disconnest the modem to the router-connect "than a PC ONLY" via a wired port #4 - reset the router by holding the button of reset in 30 seconds - switch off the router Linksys for 20 seconds and then turn it back on - check the LEDs of the Linksys router to make sure that the power, WLAN and port #4 are lit on the Linksys router. -clone the MAC - change "Mixed" wireless settings - name - change to 20 Mhz channel bandwidth and network use standard channel 11 - and in - use the Mode personal WPA - security settings and set my WPA pre-shared key password
  Before shutting down the PC and router - reconnect the modem to the router and the PC to the router - then make sure that the modem, the router and the PC are disabled for cycle a minute and the power of their back on with the modem being first - then turn on the router and last the PC

  Has anyone tried this, and he had to fix this downturn?

  Thanks in advance

  Well it's been 6 days that I woke up this morning and turned on the router and the modem from power overnight or lower I did after question troubleshooting the slow speed in the night before, does not

  I consistantly get in the 2 to 3% of the broadband speed I pay for - but I have no idea what fixed the issue

  So I'll mark it as "Resolved" and just hope that it comes not back again

  Thanks for the recommendations Klatch

• Linksys WRT320N problems. Keep losing ground day after day

  Hello

  I have a nasty problem and I absolutely had no idea on how to solve this problem.

  A couple of days, I installed my new router WRT320N in combination with 50mbit Ziggo speed (internet provider from netherland)

  On the first day speedtest.net always give mbit 47/48 down and 5 Mbps up.

  But after a few days, the router maintains a fall and a fall and abandonment until the subject of 2 Mbps.

  Now, I have reset the router and also restarted the modem for the new software etc but still nothing works.

  Ive also tried to reset the router to the parameters of Carillon and that worked... until he went down every day.

  I also took some tips from this forum that was MTU setting to 1350 manually instead of 1500 automatic and it worked... until a few days have passed and new ive got 10mbit today.

  I am naïve and in desperate need of your help!

  Setting keep passing my router 50mbit speed to almost zero in a few days at a time?

  Thank you in advance!

  Rens Voeten

  Change every time I pass the MTU to 1500, and then back to 1350 is the jump from speedtest.net meters up still crazy 50mbit.

  But if I let it, it will decrease again day after day.

  Thank you for your advice.

  Ive done what you say and also disabled UpnP and I think it did the trick.

  Ive got constant speeds to 48mbit/s (50 in total) and they have not fallen so far.

  Verify speedtest.net during lunch again tomorrow and will post here if it is down again.

  Greetz

  Rab

• WRT320n performance issues

  I'm still poor web performance with my WRT320N.  Yesterday, I finally switched back to my old WRT54g.  I suspect that this problem could be linked to the Trend Micro Home defence.  How do you turn off this option?  If each reqeust was routed to them first, this could delay shipping activity.

  I have the latest firmware installed 1.0.3

  OK, I downloaded the WRT320N_v1.0.03_010_US_code.bin rom version.  After the reboot, I have reset the default device.

  Now I reset modem dsl PPOE, subnet on the LAN and wireless SSID.

  I'll try it for a few days to see if my problem is solved and post my results.

• WRT320N the static DHCP leases

  Hello

  I have a wrt320n. It works well, but I need the static DHCP leases.

  the reason is simple: If you use static port forward for applications that don't support upnp, and the customer receives a different IP that is specified for the port forward, everything is messed up.

  I couldn't find any reference for this feature in the manual or in the web interface of the router, so I guess that's not possible ATM.

  could you please add support for this feature (pretty basic)?

  Thanks in advance.

  Static DHCP leases are called a DHCP on the WRT320n reservation. Its on the configuration page of the installation program of base next to the list of DHCP server.

• WRT320N and a Mac mini

  Recently purchased a Mac Mini and use it on my WRT320N wireless which I configured with a PC running XP. It works very well with the PC and has been since I ordered a few months ago. The Mac connects wireless; However, not feeling unwell. It takes up to 6 hours to download a file that only takes normally no more than 45 minutes to download it with the PC. It seems to be downloading for 5 seconds and then just sitting there for 10 seconds, up and down all the time.

  Help, please!

  Looks like your router is fine if the part of Windows works well. Looks like that the side Mac is not quite the same way as the part of Windows to install. If you haven't tried it yet, try to make a new 'place' on the Mac side and see if that helps. I think that I read on other forums about the connections of the weird problems and do not 'take', it seemed to work for some preliminary questions Macs with connections as well as.

• WRT320N guard drop my iPhone

  My newly installed WRT320N (Firmware Version: v1.0.03) keeps dropping my iPhone (3.1) connections. I replaced a DIR-625 which was solid with our 2 iphones. My current settings are:

  • Manual configuration
    2.4 ghz
    Mixed technique
    Auto width
    Auto channel
    Disabled SSID broadcast
  • WPA2 personal
    TKIP or AES
    Renewal of 3600 seconds

  leave all default settings as default advanced

  I had essentially the same settings on my DIR-625 and no problem
  Problems with this WRT320N and WPA2-Personal then the box back to the store... I don't want to settle for WEP128

  Use WPA Personal