WRT54GC and Synology DS107

Similar Questions

• WRT54GC and Speedtouch 510 modem

  Hi all

  I bought the wtr54gc a bit backward and tried to connect it to this darn speedtouch 510 modem, but nothing helped.

  I can connect to wirlessly for the wrt with no problems and have implemented under PPPOE with the correct credentials. The wrt is configured in Bridge mode.

  Now, when I connect the Speedtouch modem to the WAN port on the WRT, the router is not "dial" the internet connection at all, so no Internet; o)

  I know that the modem is fine as I can connect the PC directly to him and get an Internet connection.

  Now, I've been juggling for a long time and I think there may be a problem to do with the router and the modem running DHCP and the two do not talk to each other. The modem works on 10.0.0.138. The Rotuer uses the standard 192.168.1.1 address.

  My question is how to fix this? On which box DHCP must be turned on/off?

  Ive read somehwere on the execution of the modem in Bridge mode. This will help?

  I can be barking the wrong tree altogether so any help would be appreciated and need detailed help coz that it really starts to bug me! ouchhhhhhhh! (O).

  Respect to all.

  Your problem is that the SpeedTouch 510 is not a modem is a modem-router and already have your PPPoE connection for you.  You shouldn't try to do two times your PPPoE connection.

  There are two solutions:

  (a) automatic WRT54GC Connection Type Internet 'DHCP' value or

  (b) set the bridge mode SpeedTouch, so converting it to a real modem.  Then do your PPPoE with the WRT54GC connection.

  Note that with the option a, let two active DHCP servers and the ethernet port on the SpeedTouch to thread on the Internet on the WRT54GC port.

  With option (b), the SpeedTouch DHCP server is automatically disabled.

• 3 external IP addresses, a WRT610N, 2 PC and NAS

  Can it be done with what I have? Here's my situation:

  I have a modem (optical fiber) which comes with 3 LAN on s, each with a designated fixed global IP (x.x.x.26 - 28). I've been using one of these (. 26) with my WRT610N (Internet port) to connect my laptop etc. Pretty easy. Now, I recently got a NAS Synology DS107 +. Of course, if I connect it to one of the ports LAN WRT610N it gets an address 192.168.1.x as my other devices and is accessible from the outside world through x.x.x.26. But, is it possible for me to give him one of the other global unused IP (IE, x.x.x.27)? Could I connect a second modem LAN on the of directly for the WRT610N (LAN) and route somehow all that reached x.x.x.27 to the NAS, while everything that reaches x.x.x.26 is managed by the router/NAT

  Or do I need extra gadget for this. (I can not connect the modem directly on the NAS since the modem does not support gigabit LAN)

  You can connect the modem and the WRT610N using a wire, not two.

  When you say you have three addresses 'fixed' world property intellectual, I assume you mean you have three Internet addresses.  Is this correct?

  If Yes, then you have two solutions for your problem:

  (1) addition of a gigabit, such as the SD2005 or SD2008 switch between your modem and the rest of your network.  Then you should be able to access each 3 fixed Internet addresses by plugging your device in the switch.  However, you cannot connect your NAS in the switch, especially if your NAS has limited ability to protect themselves against pirates.  In addition, you might prefer to keep your NAS attached to your LAN WRT610N.  If so, try solution 2.

  (2) 2 solution is to leave your NAS connected to LAN WRT610N, but access on the Internet through a port.  Most NAS devices are accessible on the Internet by giving your NAS a LAN IP fixed address and then forward a port to address fixed.

• Problem with Remote Desktop using router WRT54GC

  Hi all.

  My husband and I travel with a computer and an iPhone each, so 4 wireless devices, when we travel, we use the WRT54GC to connect to DSL or broadband from the hotel and then create a LAN in the room using the WRT54GC so we can connect all our devices through the router to the internet.

  Key steps are:

  (1) connect to the router from the hotel to rent a computers IP address.

  (2) do an ipconfig to get the IP address leased the hotel, over the subnet, DNS servers, etc.

  (3) hook a computer into the WRT54GC and give him the IP address and other parameters and clone the IP address of the original computer used to connect to the hotel so that the hotel think that our WRT54GC is the same device.

  (4) connect the router to the wall to talk to the router of the hotel and to connect our devices on wifi LAN created by the WRT54GC and we're good to go.

  Everything works very well and always, but with one exception: we normally use connection software Office Microsoft standard to logon remotely to our computers at home.  We use dyndns to update the IP address of the computer and were marketed in the House so that each computer is accessed through our home router when a query of the DRC between the use of this port forwarding port.

  However, all of a sudden we cannot Remote Desktop our personal computers through the WRT54GC.

  If we put the original computer used to access the router from the hotel directly to the connection to the local network, then there is no problem and that computer can successfully remote desktop, but once we put the router in the equation, we cannot do.

  Any thoughts?  It's certainly something about the configuration of the router, but I checked the firewall and DNS, and those who are not suspects.  The router configuration has not changed in recent years and has always worked previously.

  Any help appreciated.

  Thanks for the tip!

  We have recently started using logmein.com.  There is no charge for simple remote desktop, but the monitor resize and things is easier with it as the version of Microsoft, and for a small fee, you can activate on the management of files, allowing you to do things like file transfer between your home and remote computers easily.  I had tried to do in the past using DRC and it was too slow, but not also with logmein.com.

  That's why we have not been totally freak out the problem, because we had a backup solution with this product, but my husband has a phone in his office, he can connect to while overseas to make calls since in Australia (where we live) while he gets a charge local calls only, and it does not work with logmein , that is why we must get Microsoft DRC will once again!

  In any case, we use dyndns to administer a dynamic update of our IP address for our home router, is to make our computers at home and in a last ditch effort, I had a look at our account and re-joined our IP against our dynamic naming.  Hop, DRC said work again after that.

  It is most strange, because the IP listed was the good IP, but somehow it seemed temporarily do not resolve correctly.

  In any case, it's all fixed.

  At least, it was pretty obvious that it was something somewhere between the router and the House, because of the way he acted. It's usually pretty obvious when your home network has fallen... we knew that is that since we could communicate by other means.

  Thanks for the tip on the other remote tools.  I will certainly check.  There is never too much!

• All files on external Synology is not found

  Hi guys, I'm not an expert but had been using L6 for a few months and after 2 weeks I wanted to access my files on external Synology but all the files in the module development of break is not found. Strange to me is that in the library, everything seems ok - connection for external hard drive is ok, not smoker of question marks on the folder or files. I can also access Synology from the Finder.

  I had an experience - is installed directly in Lightroom a local folder (on my MacBook) Synology and once he was moved again, I was not able to find these files in the develop module, but again, see the moved folder and the previous file.

  I'm completely confused... running El Captian on MacBook Pro.

  Please help... Thank you!

  Hello! Looks like I've found the bug - the name of the shared folder on the Synology has been notably Polish letter that confuses the relationship between Lightroom and Synology.
  Only, I wonder how it worked before... perhapse Synology update caused the problem.

  PS. I have the almost the same configuration with 2 TB WD red 3

• macOS Sierra always invites credentials for network drives

  At home, we have several Macs, when connecting, to mount a network SMB readers of different servers (OS X Server and Synology NAS). The credentials (username and password) for the network drives are stored in the keychain of the user through the time of the first option "remember this password in my keychain" readers was already mounted. So a command like "Mount" command correctly get readers without users needing to interact with an authentication dialog. This was works very well for a long time a completely up through OS X 10.11.6.

  In the Sierra, any attempt to build a network of road always opens the authentication dialog. The password can be filled in advance (probably from the keychain), but the user must always respond to the dialog by clicking OK. It is a huge problem for me because it breaks the loads of the automation scripts that I have that rely on the use of 'Mount' (the problem is not specific to climb, however, the same problem occurs if you use something like the command "Connect to Server" Finder).

  I tried to delete all the entries in keychain "network password" so that they will re-creqted (they make), but the behavior problem persists.

  Anyone know if this is a bug or design?

  Just to clarify. I mentioned "Mountain" above, but it is not really correct. I don't talk to the OS 'mount' command line command but rather the command mount AppleScript as in:

  Try

  turn up the volume "${url}".

  try to end

  the same problem afflicts the function 'connect to server... ". "finders.

  Certainly a change in behaviour; I hope this is temporary and is fixed in an update in the short term.

• Weird Time Machine question after restoration

  Hi all

  First post here so go easy on me

  I'll try and make this as brief as possible.

  I've been running an iMac 27 "2010 end (still running Lion 10.7.5, but it is stable so I have not found the need to modernize) and NAS from Synology DS212j with TB 2 * 3 disks for the last 3 years. I've set up time service Machine through DSM on the Synology with a quota of 1 200 GB for my iMac which worked perfectly while all the time, during which I restored the weird file without problem.

  Recently, for a number of reasons, I felt the need to update the OS of El Capitan to provide specific features that only there, so I made sure that my last backup was not serious and went through the upgrade process. It took a while but seems fine, but in the end, I became artifacts of the screen during the exchange between the office computers and for the worse, completely locked Mail machine as soon as you have clicked on an email. A lot of research on Google and all the patches applied but no joy, I decided to restore Lion and watch a clean install of El Crappo thereafter.

  At through the process of full restoration without problem and he has restored from the DS212j without a single question (took about 14 hours but again, it worked) and my Mac was back as if nothing ever happened. Happy days!

  Shortly after that, although the problem started with Time Machine backups do not tell me that there is not enough space on the destination to save my machine...

  1. I look into my quota on the NAS (the bit you set to ensure that backups are not the entire disk) and it tells me that there are 820 used GB which I guess is my backups Time Machine original that nothing should have changed on the NAS.

  2. I don't seem to be able to see the Time Capsule shared queue Station disk even after display in shared folders, it should he appear?

  3. I unhid it and he could ride through cmd & k and using smb / / nom_lecteur/Time Capsule so I can now see the volume in the Finder.

  4. I can see there are 2 * sparsebundle files, one for my iMac and the other for Macbook Air my wife. The file for mine displays a last updated date/time of a few minutes ago, but no size of file. The woman shows well, last time/date and file size (he stayed very well throughout this btw).

  5. when I enter Time Machine on the iMac all my historical incremental backups have disappeared and the only backup who shows also available is the date to which I restored from, nothing before and obviously nothing after because there is no space.

  I have not a clue what going on here, but it seems to me like it after restoring my sparsebundle file (which is always on the NAS and must be intact) is there, but for some reason the iMac cannot see/index / register or see one of the backups that are contained in.

  Apple support tried to help but actually said that they don't support anything other than an official time Capsule and Synology must implement the Time Machine in a different way because he could not find the sparesebundle file, only the tf volume content when it is mounted by trying to start the backup.  From what I read and checked the forums of Synology and the sheets, they don't do anything outside the norm with regard to the Time Machine application, it's literally just a network volume that stores the sparesebundle in the same Apple so designed, then why on Earth after restoring my iMac do not see the content of this sparsebundle file , and why it consumes disk space?

  So, what I'm looking for help, is this (or questions):

  A. How do I look inside the time Capsule (this is what I call the Time Machine shared disk) to see how many files is there and if there is a GB 820 that contains all the data from my legacy?

  B. someone at - it an idea how the iMac see and recognize the original file should be here?

  C. If I were to remove the rare bundle that I peut see, will that potentially be old and will be that free space that is held open and allow me to perform a full backup from scratch?

  D. If C is not the original file remains hidden, no idea how I can find...?

  E. do I have other options that you can think of...?

  Sorry, that was supposed to be brief, but I wanted to make sure I had all the info there to allow people to understand what has happened and what I did to try to resolve so far.

  Thanks in advance

  See you soon

  Mark

  Mark, in my opinion, your questions can be answered by the great Pondini http://pondini.org/TM/FAQ.html

• routers in series on separate subnet

  I just got the E4200 to replace the modem/router to my provider and I need help with the Setup. What complicates this is that the router of the provider of also provides internet, also (with decoder) TV and phone.

  What I want to achieve:

  1 E4200 as main router (I guess I clone the MAC of the original router). This router will provide the connection for my work, PC and Synology NAS

  2. the router of the provider of series, such as if possible, PCs on ROUTER1 have access to services on the 2 (VoIP) router, but not the reverse.

  3. 2 routers/nets with own SSID

  The questions is how to connect and configure two routers, as I keep the phone and the television on the router of the provider. WAN to LAN or LAN to LAN.

  Any help would be much appreciated.

  Thank you

  Large. Appreciate it. He will give a try.

  I just plugged in the installation CD and is already almost 20 minutes telling me "download updates". I hope it ends soon, so that I can start the installation.

  This is the first time I use the software for the configuration, but I noticed yesterday that even if you go the routers IP, it asks you first install the software.

  Thanks to you all.

• Inexpensive iSCSI SAN\NAS

  I'm working with an engineering company who will move several physical servers to a single machine running 3 1 VMs. ESXi host is a Windows SBS 2011 server, second is a Server 2008 (application server with very low load) system, and the third will be a simple file server running FTP and some shared folders for internal use (we could easily move the files to the SAN\NAS server). He comes to support 15 local users and 15 others in remote offices or on the ground.

  The ESXi host is a Dell, or Supermicro system all of the ESXi compatibility list, that was the easy part so far. We have trouble finding an inexpensive SAN\NAS iSCSI device. Our needs for this SAN are limited. We plan on 3 virtual machines running on the internal disks of the ESXi host. The SAN\NAS will be mainly used as a target for backup for Veaem (and), but it seems prudent to support iSCSI specification where our needs change in the future and we must provide the ESXi host iSCSI access.

  In my lab at home, I use a Netgear ReadyNAS Ultra 6 on beta firmware that works very well. But I'm hesitant to put something with firmware beta in production. And, in looking at the options, none of the sellers of that I would normally think VMware still certified. I am referring to the business link D-Link, Netgear, Qnap and Synology. Now, they have all the beta firmwares according to different levels of support for ESXi, but I don't know that I'm uncomfortable that deployment in production.

  I would appreciate any recommendations on some NAS units that will work or another approach. If you need more information, just ask andI'll be more than happy to do what I can. Thanks in advance.

  Considered the px4/px6 EMC series?  Fully VMware and EMC used VMware, bring your own drives, etc.

• I will store and use my contacts on my cloud of synology. I will never store contacts anywhere else. Is this possible?

  I use Win10, Android smartphone, Android Tablet and since two weeks UBUNTU. I have office 2010 windows located at ch. If the data is stored outside my own material I have no control of the use of these data. So I installed a synology server and store data for different OS in my own cloud on my own material. If the contacts can be stored on my cloud, then I get much more control of my data.

  Thanks for your reply.
  Sorry, but I already know it. My hope was to find a possibility to store data directly in my cloud. A solution such as: "set the local directory and the file name in an INI file or configuration.
  There is no other way that the use of the "Adressbuch Synchronizer" down - and upload the file of contacts.

• Sierra and Photos: unable to load library of pictures located on a NAS

  I have a 300 GB photo library located on a NAS.

  No problem with El Capitan and Yosemite.

  With Sierra when I opened the Photos I had a spinning wheel and even after a night full, nothing happened (Finally, the NAS disconnected... but I think it's something Sierra... never happened before)

  Now, I am trying to get all the Masters folder within the library of Photos...

  I have the same problem. Cannot open the pictures library that is located on a Synology NAS. Finder (not answer)

• Sierra / problem with network Synology readers

  Hello

  because Sierra was released, I discovered a few questions on the Synology network drives. If I want to change some JPG to disk for example turn them or what ever Finder will immediately freeze and con ' t not be restarted! Side Synology always the last relase is installed - on Yosemite / El Capitan, it works great!

  Someone you have the same problem?

  Apple recommends against the use of network drives.

• Installation of iTunes, Synology NAS,

  I can get a good guide on how to use my 716 + NAS synology, to store all my music files, and when I open itunes on my iMac, MacBook air, or windows laptop or even when I use AppleTV, I can access this music (if it is not stored locally on my computer)?

  Also, I tried this in the past, but with itunes on my iMac to restart, it would never ride my share, so he always missed the location default library itunes (locally) and mess substance upward.

  I see also synology has an Itunes Server package, that would be a solution?

  Thank you

  First, be aware that there are no rare posts here on NAS problems with iTunes.  NAS is great conceptually, but in execution of problems that can occur with iTunes and have done so for more than a decade.  Everyone makes fingers to everyone, but the main thing is that you always run a risk of a library mutilated.  Better is to use a simple external drive and use the NAS for backup.

  I think the server package is pretending to be a shared library iTunes without having an active version of iTunes open at the time.  Have you read the manual or online for the NAS documentation? I don't have one and what I know is people post questions here.

  The reason why you had problems before is your SIN is going to sleep and not wake up before launching iTunes.  The same thing would happen even if you use a simple external hard drive.  If it doesn't happen at startup, you can try to put an alias to the iTunes on the server application, then an alias to this alias in your computer and start iTunes this way, not directly from the computer.

• What to use for the storage media and backup?

  What material and components should I buy if I want to automatically back up our three Macs and watch downloaded (NOT continuous) movies on TV?

  Here is our current configuration:

  -Computers: (Mac Mini, MBP and Air)

  -Router/backup: via TimeCapsule (with our satellite Internet connected to the TimeCapsule via ethernet input)

  -Film/storage media: digital WD hard drive

  -J' have an Apple TV (3rd generation), but we do not use it... cannot

  We currently live in Kenya, where internet speed is not great... so we are unable to stream movies.  Average speed is about 100 Kbps.  Have about 2 TB of movies we watch currently on TV by plugging a portable hard disk into the DVD drive. I know enough that IT is dangerous (e.g. not much!), but need advice on options on a good way to potentially combine these requirements (storage backup and film). Potentially, something like a new RAID drive plugged into a router. RAID drive backups using Time Machine and then also has films on which can be wired (via the USB port? Ethernet to Apple TV 4th Gen to HDMI to TV?) TV to watch movies. Not sure if I need something like Plex media server or something to do, however.

  Thanks much for any help!

  I suggest that you consider a dedicated NAS device. An example would be the Synology DS416.

• Unable to connect server to Synology OpenDirectory

  Using 10.10.x server and client 10.11.x, can't connect Apple machines to a Synology OpenDirectory of services. The directory utility says simply "the server has not responded.

  However, using ApacheDirectoryStudio or the ldapsearch command, I can properly connect and search the database of openDirectory syno.  (for example: ldapsearch h ldap.mydomain.blah d uid = root, cn = users, dc = ldap, dc = mydomain, dc = mypassword works fine blah - w.)

  So, basically, I can connect and search, but the INTERFACE seems to do things differently. And I followed the proper procedures found in the documentation of Syno.

  Any idea?

  In my view, this error is related to SSL, more precisely the way as OD accesses the.app store certificate. The cli version still works for some reason any. If you try to make an unencrypted link, it should work. If this isn't an ideal solution (to the very temporary), it should still help you debug